Price Clear







Star wars Model Kits

Showing 1 - 30 of 93 products

img
SAVE RM44.40

[Star Wars] 1/144 U-Wing and Tie Striker

[Star Wars] 1/144 U-Wing & Tie Striker

[INCLUDED ACCESSORIES ]
Dedicated display base x 2 (for U-Wing Fighter / for TIE Striker)
Laser effect part x 2 (for U-Wing Fighter)
Canopy x 2 types (for U-Wing Fighter)
[clear part x 1 / frame part x 1]
Pilot x 2 types (for U-Wing Fighter)
Landing gears x 1 set (for U-Wing Fighter)
1/144 Combat Assault Tank x 2
1/144 Combat Assault Tank driver part x 

RM87.40
img
SAVE RM62.50

[Star Wars] 1/48 Snowspeeder (1/144 Snowspeeder Included)

[Star Wars] 1/48 & 1/144 Snowspeeder

Comes with 1/48 Model Kit and also 1/144 Model Kit

From Star Wars: Episode V The Empire Strikes Back comes the Snowspeeder 1/48 & 1/144 scale set! This set comes with 2 Snowspeeders, one in the 1/48 scale and another in the 1/144 scale. You can use this set to create depth and dimension to your displays and dioramas. Display these along with the 1/144 AT-AT (sold separately) to mimic your favorite scenes from the movie!

This set includes one pilot and 2 dedicated display bases, 7 runners, a water slide decal, marking sticker sheet, and instructions. 

Features:
1/144 and 1/48 scales
Model Kit
From the Star Wars series
Featuring a model kit of 2 Snowspeeders in two different scales
Includes one pilot figure, 2 display bases, 7 runners, a water slide decal, marking sticker sheet, and instructions

Contents:
1/48 scale Snowspeeder parts
1/144 scale Snowspeeder parts
Pilot figure
2 display bases
7 runners
Water slide decal
Marking sticker sheet
Instructions

RM99.20
img
SAVE RM69.70

[Star Wars] 1/72 Red Squadron X-Wing Starfighter

[Star Wars] Red Squadron X-Wing Starfighter
  • Height approx 86mm
  • In marking seal, reproduce the characteristic line of the X-wing starfighter.
  • That is characteristic wing of the X-wing starfighter is possible deployment.
  • Display base is included

RM110.00
RM110.00 Add to cart
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 008 - AT-ST & Snowspeeder

[Star Wars] Vehicle Model 008 AT-ST & Snowspeeder

Snowspeeder Length: 40mm
AT-ST Height: 60mm
A set including AT-ST and Snowspeeder
Features incredible detail.
Includes a display stand for Snowspeeder.

RM24.60
img
SAVE RM53.80

[Star Wars] 1/12 K-2SO

[Star Wars] 1/12 K-2SO

Accessory] 
Display Base x 1 
Display Stand x 1 
Hand Part x 4 Types

RM90.00
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 009 - Jedi Starfighter

* The Jedi Starfighter as seen in "Star Wars Episode II: Attack of the Clones" joins the Vehicle Model series!

PRECISE DETAIL
* Highly detailed molding in a palm-sized scale.

ACCURATE FEATURES
* Hyperdrive Docking Ring is detachable!

RE-CREATE SCENES
* Display alongside the "1/144 Slave I Jango Fett Ver.” (sold separately) to replicate key scenes from the film!

[ INCLUDED ACCESSORIES ]
* Dedicated display base x 1

[ CONTENTS ]
* Sprue x 4
* Marking sticker x 1
* Instruction manual (printed on package)

RM24.60
img
SAVE RM85.90

[Star Wars] 1/144 Slave I (Jango Fett's Ver.)

From "Star Wars Episode 2: Attack of the Clones", comes the infamous bounty hunter Jango Fett's Slave I!  Reproduce the shape of the Slave I through new parts for the cockpit and exterior. Set includes dedicated display base, display base part, cockpit hatch parts (open and close), and flight/parked cylinder parts. 


Contents:
- Runner x8
- Water slide decal x1
- Marking sticker sheet x1
- Instruction manual x1.

Model approximately 5" high and 5.25" wide.

RM141.70
RM141.70 Add to cart
img
SAVE RM67.70

[Star Wars] 1/6 Yoda (1/12 scale Yoda Included)

From the Star Wars: Episode V The Empire Strikes Back comes a 1/6 scale model kit of Yoda the wise!

Yoda stands 4.3 inches when completed and includes 2 different head sculpts, his gimer staff, his green light saber, water transfer decals, display base, and interchangeable hands.

This model kit also includes a 1/12 scale Yoda holding his grimer staff, standing about 2.2 inches when completed.

Features:
1/6 scale Yoda is 4.3 inches (11cm)
1/12 scale Yoda is 2.2 inches (5.7cm)
Made of plastic
From The Empire Strikes Back
Featuring Yoda as a model kit
Includes 6 molded parts, 2 interchangeable heads, 1/6 and 1/12 scale staffs, lightsaber parts, 5 interchangeable hands, 2 display bases, water transfer decal, instructions

Contents:
1/6 scale Yoda parts
1/12 scale Yoda parts
2 interchangeable heads
With hair
Without hair
5 interchangeable hands
2 staff parts
1/6 scale staff
1/12 scale staff
2 lightsabers
Sheathed
Unsheathed
Water transfer decal
2 display bases
1/6 scale
1/12 scale
Instructions

RM112.00
RM112.00 Add to cart
img
SAVE RM358.60

[Star Wars] 1/2 BB-8

"BB - 8" which became popular in "Star Wars / Awakening of Force" appeared becoming a large model model of about 33.5 cm! Because it is this size realistic gimmick reproduction and abundant attached parts. With high-quality BB-8 in hand!


 * NEW TECHNOLOGY 
First adopted the new technology "shading mold" that clearly shows detail line (line). By emphasizing the shadow of the detail line it is a large model but it has a sense of density. 

* GIMMICK 
Scenes that remove the R2-D2 sheet that was impressive in the play, the discharge scene, the scene that thumbs up with the burner can be reproduced with various parts. In the play, "Map Chip Parts" came from "Po Dammeron" is included. The "storage pocket" where the chip fits is also reproducible. 

* LIGHTING 
Primary photoreceptor of the head can be reproduced on the LED (red) unit. Batteries used: LR 41 x 2 (sold separately) 

[Accessories] 
Dedicated display base x 1, Arm x 2 (Zapper arm parts, burner arm parts), utility arm parts x 1, map chip parts x 1, effect parts x 2 (fire reproduction parts, discharge reproduction parts) 

[Product Details] 
Molded item x 22, LED unit (red) x 1, marking seal x 1, instruction manual x 1

RM480.00
RM480.00 Add to cart
img
SAVE RM92.60

[Star Wars] 1/12 Battle Droid & Stap

Commercialization of the trade union's "Battle Droid" that appeared in "Star Wars Episode 1 / Phantom Menace", "Star Wars Episode 2 / Attack of the Clone" and its Vehicle "Stap" set! 


Thorough material verification realized modeling sticking! 

The state before the start of the battle droid can also be reproduced. Characteristic weapons of battle droids are included. It is also possible to install a blaster in a backpack with a hook style. Battle droid backpack is removable. Macro binuclar is also included. The head parts with the conventional item C - 3PO can be exchanged, and an impressive scene in the play can be reproduced. Two types of black pedestal for battle droid and clear pedestal for stap are attached. 

Accessories : 
Display Base ~ 2 (Base for Battle Droid ~ 1, Clear Base for Stap ~ 1) 
E-5 Blaster ~ 1 
Macro Binocular ~ 1 
Replacement Antenna ~ 1 
Head Replacement Part x 2

RM159.00
RM159.00 Add to cart
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter


2 units in the package

RM24.60
img
SAVE RM62.50

[Star Wars] 1/12 First Order Storm Trooper Executioner

It is a plastic model of Stormtrooper, which is characterized by a black line of the head appearing in "Star Wars / Last Jedi". We also faithfully reproduce the new Stormtrooper helmet that appears in this work. Two kinds of weapons including the newly appearing claw-like weapon and eight kinds of hand parts are attached. Effective parts are also attached to the new armament, you can take a powerful action pose. Also included are parts of the conventional First Order Stormtrooper which also changed helmet design as well, it is a selectable formula which can be reproduced both high value items. 

Total height: about 142 mm 

[INCLUDED ACCESSORIES] 
Shoulder pad x 2 species
Dedicated display base x 1
F-11D blaster rifle x 1
EP8 New Arm x 1
Effect parts x 1 
Hand parts x 8 species
Weapon possession (right and left) x 1 each 
Gun handle (right and left) x 1 each 
Hirate (left and right) x 1 each 
Fist (left and right) x 1 each 

[CONTENTS] 
Sprue x 7
Water-transfer decal x 1 
Marking seal x 1 
Instruction manual x 1

RM99.20
img
SAVE RM11.30

[Star Wars] Vehicle Model Series 011 - Blue Squadron Resistance X-Wing Fighter

X Wing Fighter (Resistance Specification) Appears in the Vehicle Model Series with "Star Wars / The Last Jedi" Version! While palm-sized collection model, the new droid loaded in the X wing fighter and the characteristic airframe are precisely reproduced! Total length: about 87 mm [INCLUDED ACCESSORIES] ■ Dedicated display base × 1 [CONTENTS] ■ Sprue x 5 ■ Marking seal × 1 ■ Instruction Manual × 1 (printed on the back of the box)

RM24.60
img
SAVE RM11.30

[STAR WARS] Vehicle Model Series 012 - AT-M6

The first appearance in "Star Wars / the last of the Jedi", the first of three-dimensional vehicle model series of palm-sized a huge four-legged walker type · AT-M6. And characteristic forefoot part, thoroughly reproduced until the abdomen detail! Presence of a small but spectacular! High palm size of the collection of becoming want multiple body decoration. If multiple Soroere, you can enjoy the image of a powerful march scene in the play! [Accessories] * body x 1

RM24.60
img
SAVE RM69.70

[STAR WARS] 1/12 Han Solo Storm Trooper Ver.

Utilizing pre-colored plastic and snap together assembly like GunPla, the Star Wars Character Line provides ease of assembly and feature rich detail! Click below for line list and images of initial releases for May and June, including the recently announced Han Solo and Luke Skywalker Stormtroopers which feature special new technologies that allow the face to be printed directly onto the plastic!

- Accessories

  • Han Solo Facial Part x 1
  • Stromtrooper Helmet x 1
  • Display Base x 1
  • E-11 Blaster x 1
  • DTL-19 Heavy Blaster Rifle x 1
  • SE-14r  Short Range Combat Pistol x 1
  • Hand parts x 6
  • Water decal x 1
  • Marking stick x 1
  • Instruction Manual x 1

RM110.00
RM110.00 Add to cart
img
SAVE RM69.70

[STAR WARS] 1/12 Luke Skywalker Storm Trooper Ver.

Bandai Hobby Division gives off a human face representation by the "Star Wars" plastic model series of NEXT MOVE "Triaxial Jet Finish" 

New technology, the precision of conventional plastic model fusion! 

Realize the print to a three-direction by the jig controlled by the development of ... dedicated jig and Triaxial Jet Finish. The molded article alone is obtained did not shadow sense of marvel of new technologies to reproduce the vitality of the surface feeling and look of the skin, the conventional ink jet printing Quality of dimensions are different, stereoscopic the expression of actors and vividly It has been reproduced. 

Develop and introduce new technology to surpass the figure painting techniques of the past! Products that make up the Luke Skywalker who infiltrated the Death Star in the movie of "Star Wars Episode 4 / A New Hope" in the "plastic model"! Storm Trooper helmet parts is also included!

Luke Skywalker in Death in the star was used to jump to the opposite side of the passage had the Princess Leia, the shape of the grappling hook that is attached to the rear belt reproduction! 

Height reproduction for parts also included, height difference between the Han Solo also can be reproduced! 

Accessories:

- Luke Skywalker Facial Part x 1
- Stromtrooper Helmet x 1
- Display Base x 1
- E-11 Blaster x 1
- DTL-19 Heavy Blaster Rifle x 1
- SE-14r  Short Range Combat Pistol x 1
- Hand parts x 6
- Water decal x 1
- Marking stick x 1
- Instruction Manual x 1

RM110.00
RM110.00 Add to cart
img
SAVE RM26.00

[STAR WARS] 1/144 X-WING STARFIGHTER & Y-WING STARFIGHTER

Bandai Japan presents a twin set of palm-sized versions of the X-Wing and Y-Wing! Each come with a clear display stand along with stickers for nameplates!


Product Features:

- X-Wing is 3.4 inches (8.64cm)
- Y-Wing is 4 inches (10.16cm)
- 1/144 scale
- From the Star Wars series
- Both include clear display stands along with nameplate stickers

Box Contents:

- X-Wing Starfighter 1/144 scale model parts
- Y-Wing Starfighter 1/144 scale model parts
- 2 clear display stands
- 2 nameplate stickers
- 4 runners

RM44.80
img
SAVE RM78.80

[STAR WARS] Death Star Attack Set

[STAR WARS] Death Star Attack Set 1/144


Recreate the iconic Death Star trench run from "Star Wars A New Hope"!  This 1/144 model set comes with a partial cut away section of the Death Star Trench including one X-Wing which has marking options for Red 5, Red 3, and Red 2.  X-wing 3.4" long.  Trench Approx 9" long.  Runner x 8, Sticker, Instruction Manual.

Product size: X-wing 3.4" long. 
Trench Approx 9" long

RM136.80
RM136.80 Add to cart
img
SAVE RM846.50

[Star Wars] PG 1/72 Millennium Falcon (Standard Ver.) - A New Hope

This release of the PG Falcon features stickers instead of water slides to decorate the various hull panels and a translucent light blue clear part in place of the LED system to simulate the color of the Sublight engine propulsion systems of the Falcon as seen in the digitally remastered releases of "Star Wars."

Created through thousands of hours studying the studio model used to film "Star Wars: A New Hope", it is the most accurate version ever to be released. Using Bandai's color injection technology, the kit has been engineered to even have its hull damage molded into the parts while still being snap together and requiring no glue. The model even creates inner details of the ship, ranging from the cockpit to the famous boarding ramp.

At 19" long this model stands out as the ultimate Millennium Falcon model kit. Set includes dedicated display base and seated figures of Han, Luke Chewbacca, Obi-wan, C-3P0, Princess Leia.


Product Features
  • 19 inches (48.25cm)
  • Made of plastic
  • Features stickers instead of water slides
  • Translucent light blue clear parts to simulate the color of the Sublight engine propulsion system
  • Color injection technology
  • No glue required
Box Contents
  • Pieces to build the Millennium Falcon
  • Han figure
  • Luke figure
  • Chewbacca figure
  • Obi-wan figure
  • C-3PO figure
  • Princess Leia figure

RM1250.00
RM1250.00 Add to cart
img
SAVE RM418.60

[Star Wars] 1/2 BB-8 (Gloss Finish)

YES, we finally get a big BB-8! This beautiful kit utilizes glass-finished plastic for a shiny look right out of the box, and all the minor details of BB-8's surface have been faithfully reproduced. Multiple arms are included so you can display him shocking his enemies or approving of his friends, and a red LED unit is also included to reproduce his illuminated camera eye so you can display him just like any scene in the movie! A display base is included so he doesn't roll away, so you can proudly display this foot-tall cutie anywhere you'd like!

Height:
33.5 cm

Kit includes:
  • Dedicated display base
  • 2 x arm type (zapper, burner)
  • Utility arm parts
  • Memory Chip Parts
  • Effect part x 2 (electricity, fire)
  • Red LED Unit

RM420.00
RM420.00 Add to cart
img
SAVE RM78.80

[Star Wars] 1/12 Darth Vader (Return of Jedi)

Darth Vader returns to the 1/12 line with a new mask off version. This model utilizes the Triaxial Jet Finish and by popular demand has a new cape recreated with soft plastic to increase poseability. It comes with an alternate right arm with the hand cut off to reflect the fierce fight with Luke Skywalker. The chest parts have been recreated in a new molded design as well. This is the ultimate Darth Vader model kit!


Product Features

  • 6 inches (15.24cm)
  • Made of plastic
  • From Return of the Jedi
  • Utilizes the Triaxial Jet Finish
  • Cape recreated with soft plastic to increase poseability

Box Contents

  • 9 Runners
  • 2 Face parts
  • 2 Cape parts
  • Cut off right hand
  • 2 Chest panels
  • Lightsaber
  • Lightsaber hilt
  • 5 Hands
  • Stickers Decals

RM136.80
RM136.80 Add to cart
img
SAVE RM43.80

[Star Wars] 1/12 R5-J2

R5-J2 is an Imperial maintenance droid stationed aboard the Death Star II that provides support and repairs. It includes a display base plus additional arm accessories for R2-D2.

Product Features:
- 3.60 inches (9.15cm)
- Made of plastic
- From the Star Wars franchise
- Additional accessories for R2-D2
- R2-D2 not included

Box Contents:
- 5 Runners
- Stickers
- Additional arm accessories (for R2-D2)

RM76.00
img
SAVE RM2.00

[Star Wars] 1/12 R2-Q5

R2-Q5 is an Imperial maintenance droid stationed aboard the Death Star that provides support and repairs. It includes a display base plus additional accessories for R2-D2, including computer interphase arm parts as well as the drink arm parts.

Product Features:
- 3.60 inches (9.15cm)
- Made of plastic
- From the Star Wars franchise
- Additional accessories for R2-D2
- R2-D2 not included

Box Contents:
- 5 Runners
- Stickers
- Computer interphase arm parts (for R2-D2)
- Drink arm parts (for R2-D2)

RM76.00
img
SAVE RM44.80

[Star Wars] 1/12 R2-Q2

Astromek droid "R2-Q2" appearing in "Star Wars Episode 4 / New Hope" appears in the droid series!
-   We reproduce characteristic body color, detail with parts division and each part marking seal faithfully.
-   Dedicated display base is attached.

[INCLUDED ACCESSORIES]
-   Dedicated display base x 1

[CONTENTS]
-   Molded parts x 5
-   Kinousseal x 1
-   Instruction manual x 1

RM75.00
img
SAVE RM14.00

[Star Wars] 1/12 R4-M9 - New Hope

After the opening of "Star Wars Episode 4 / New Hope", Astromek Droid of the Imperial Army detained by Brockade Runner comes up! 
-   We reproduce the body faithfully with detail by parts division and each part marking seal which imaged setting color. 
-  Dedicated display base is attached. 

【Accessories】 
-  Display base x 1 

[Item content] 
-   Sprue x 6 
-   Marking seal x 1 
-   Manual x 1

    RM76.00
    img
    SAVE RM56.90

    [Star Wars] Star Wars: Return of The Jedi (Clear Vehicle Set)

    This vehicle set features the Death Star II, X-Wing, Y-Wing, and the Millennium Falcon as seen in Return of the Jedi. Each scaled vehicle includes a dedicated base with the name and scale written on it.

    • 4 inches (10.16cm)
    • Death Star II is 1/2,700,000 scale
    • X-Wing and Y-Wing are 1/144 scale
    • Millennium Falcon is 1/350 scale
    • Made of plastic
    • Part of the Vehicle Model series
    • Based on the designs from Return of the Jedi
    • Pieces to build
      • Death Star II
      • X-Wing Starfighter
      • Y-Wing Starfighter
      • Millennium Falcon
      • 4 Display bases
    • Water slide decals

    RM98.80
    img
    SAVE RM19.90

    [Star Wars] Vehicle Model 016 Super Star Destroyer

    The newest vehicle model from Star Wars is the Super Star Destroyer! This model faithfully recreates the massive ship from the original Star Wars trilogy.


    Box Contents
    -Pieces to build 
      - Super Star Destroyer
      - Display base

    RM40.00
    img
    SAVE RM31.80

    [Star Wars] 1/100000 Super Star Destroyer & 1/14500 Star Destroyer

    This model kit two-pack contains a Star Destroyer and an Executor Class Super Star Destroyer with clear display stands.


    Product Features
    - 4 inches (10.16cm)
    - Made of plastic
    - From the original Star Wars trilogy
    - Easy assembly
    - Star Destroyer is in 1/14,500 scale
    - Super Star Destroyer is in 1/100,000 scale
    - Instructions may or may not include English translation

    Box Contents
    • Pieces to build
             - Star Destroyer 
             - Super Star Destroyer 
             - 2 Display stands

    RM64.00
    img
    SAVE RM59.10

    [Star Wars] First Order Stormtrooper (The Rise of Skywalker)

    This 1/12 scale model kit features a First Order Stormtrooper as seen in the third installment of the Star Wars sequel trilogy, Star Wars: The Rise of Skywalker. Included with the kit are three types of shoulder paldron parts as well as six interchangeable hand parts.


    • 1/12 scale
    • From Star Wars: The Rise of Skywalker
    • Made of plastic
    • Parts to build a First Order Stormtrooper 
    • Display Base
    • 3 Types of shoulder paldron parts
    • 2 Blaster 
    • Tonfa
    • Shield
    • 6 Interchangeable hand parts
    • Water decals and marking stickers

    RM102.60
    RM102.60 Add to cart
    img
    SAVE RM78.80

    [Star Wars] 1/12 Kylo Ren (The Rise of Skywalker)

    Based on the movie Star Wars: The Rise of Skywalker comes this 1:12 scale model kit of Kylo Ren. The Star Wars: The Rise of Skywalker Kylo Ren 1:12 Scale Model Kit includes Lightsaber parts with in-motion swing effects as well as hooded and un-hooded cloak parts. This model kit is a must have for Star Wars fans!

    RM136.80
    RM136.80 Add to cart

    Showing 1 - 30 of 93 products