• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

• MG RGM-79(G) GM Ground Type
  

• Master Grade kit of the Londo Bell Corps' high-performance MS: the Jesta! 
• Deployed by the elite Londo Bell Corps, The Jesta is replicated here with gimmicks such as its moving shield arm. In addition, this kit incorporate proportions and features once thought to be unique to top-level kits, now made standard for the Master Grade series.
• Movable shield arm can hold the shield against the backpack or in a usable position! 
• Grenades mounted at the waist, and specialized Beam Rifle and Beam Saber are included 
• Emotion manipulators adopted from the higher-level v Gundam Ver.Ka, along with the weapon-locking system!
• With a limited operating time in Destroy Mode, the Unicorn Gundam relies on the elite RGM-96X Jesta to take out it's non-Newtype enemies! 
• Accessories: Beam Rifle, Shield, Beam Saber, Pilot Figure (Standing, Sitting), Joint for Action Base 1

• Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  
• The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
• Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
• The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
• With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".
  

• Marking the completion of the MG SEED Remaster Project: The original Aile Strike Gundam!
• Following the release of the Duel Gundam Assault Shroud, Aegis Gundam, Buster Gundam and Blitz Gundam, the four SEED Remaster Gundams last year, and using feedback about the technologies and concept designs used, the GAT-X frame is recreated here in high definition! Designed following the newer proportions, this MG reflects the sort of forward-thinking redesigns that characterise the MG series.
• Includes Beam Rifle and folding Armor Schneider knives.
• Can recreate the Perfect Strike Gundam using the MG Sword Launcher Striker Pack! (Sold Separately)
• Can be mounted with most other Striker Packs, and activated with included battery pack! 
• Accessories: Aile Strike Pack, Rechargeable Battery Pack, Beam Rifle, Beam Saber x2,
• Shield, Armor Schneider x2, Pilot Figure x4, Dedicated Stand

• Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  
• August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  
• With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  
• Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  
• Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  
• Rear leg armor enables better range of motion in the ankle joints. 
  
• Includes paintable material for the internal structure for easy detailing.
  
• Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka
  

• The RMS-106 Hizack (aka Hi-Zack) is a mass-production general-purpose mobile suit. Based on the mobile suit line of the MS-06 Zaku II, the Hizack was a mass production suit used by the Titans and EFSF in Mobile Suit Zeta Gundam.
  

• Heat Hawk
  
• Beam Saber
  
• 3-tube Missile Pod
  
• BR-87A Beam Rifle
  
• Shield
  
• 120mm Zaku Machine Gun Kai
  
• Shoulder Shield
  
• Cracker Grenades
  

• From "New Mobile Report Gundam W Endless Waltz The Glory of Losers", Wing Gundam Proto Zero appears as MG. 
• The parts are completely newly molded and functions for the full transformation are accommodated. The movable frames made of new materials are paintable. 
• Full transformation of MS -  ?? Neo-Bird can be re-created with various gimmicks such as the 180 degrees rotation of its head part and the lower body part. 
• The conspicuous wings have various gimmicks such as the deployment function. The side armor fins on its waist are movable. 
• The hatches of the machine cannons on its shoulders are openable. The quadruple barreled Vulcan is precisely re-created. 
• The shoulder armor is dual structure and openable. The storage gimmicks for the beam saber on its shoulder and Verniers inside of the shoulder armor are precisely re-created. 
• The overwhelming "Twin Buster Rifle" can be separated into the right and left. 
• The original marking produced by Hajime Katoki is included. 
• A display stand is included. The special joints for the kit make it possible to display it in MS mode and Neo-Bird mode in midair. 
• Runner x18, Foil sticker x1, Dry decal x1, Tetron sticker x1, Instruction manual x1

[Daban] 1/100 Duel Gundam Assault Shroud (MG)

• The RX-0 Unicorn Gundam 03 Phenex is a mobile suit that appeared in Mobile Suit Gundam UC: One of Seventy Two, a short animation feature at Gundam Front Tokyo's "DOME-G" on August 3, 2013. It is based off a short story written by Gundam Unicorn's author, Fukui Harutoshi. To celebrate this short animated feature, Bandai Hobby produced a limited Gundam Front Tokyo HG model kit of this design.
  

[Daban] 1/100 Gundam Astray Red Frame (MG)

Gao Gao MG 1/100 Strike Freedom Gundam (FULL BURST MODE)

• This Master Grade MS-18E Kampfer is fully posable at all joints. 
  
• It features extensive internal detail, such as individually-posable finger joints. 
  
• If the normal Master Grade magic wasn’t enough, it also comes with numerous weapons, including the beam saber, 2 Giant Baz bazookas, Sturm Faust with an extra round, a shotgun with detachable shoulder stock, and the chain mine. 
  
• Most of these mount right on the mech’s back or hips for firing and/or storage. 
  
• Of course, the kit is also molded in color, and features easy snap assembly.
  

MG 1/100 MSM-07 Z'Gok 

- Accessories: Dover gun, shield, beam saber dolls Standing × 2,1 / 100 ZX Doll 1/100 ZX pilot, fist (left and right), palm (left and right), hand grip for arms (left and right) 

A GM based on the 2.0 RX-78 frame, it features new additional detail on its internal skeletal structure and ability to choose between classic GM front skirt armor or its more contemporary appearance. Includes beam spray gun, beam saber, bazooka, shield.

• Accessories: beam rifle, early type beam rifle, shoulder Cannon, hyper bazooka, shield, beam saber × 2, arms cannon fire effects, chest missile effect, chest Vulcan fire effects
  
• The first Gundam as visually re-interpreted in Gundam: The Origin features new engineering that allows it to perform amazing feats of flexibility in its torso and ankles to recreate dynamic poses never before possible. Weapons include wrist and chest mounted Vulcan cannons, chest mounted launcher, interchangeable shoulder cannon, bazooka, 2 types of beam rifles, beam sabers, and shield, New to this version are special effect parts to recreate smoke trails/muzzle flash on its small arms weapons.