Price Clear







Showing Gundam Model Kits + REAL GRADE (RG) product(s)

Showing 1 - 30 of 89 products

img
SAVERM59.90

[001] RG 1/144 RX-78-2 Gundam

  • Runner x 10, Realistic decal x1, Instruction manual 
  • A new series REAL GRADE (RG) rolls out in July 2010. 
  • A new brand of plastic model kit that pursues realistic representation with the latest technology for all those who know Gundam. A highly detailed model that has dynamic action and gimmicks. A pre-constructed inner frame makes assembling stress-free. 
  • All settings of RX-78-2 Gundam are consolidated into the 125mm tall body. 
  • Having an inner frame "Advanced MS Joint" which makes it possible to move dynamically with fewer parts. 
  • Attached the "Realistic Decal" that pursues reality with special material.

RM90.00
img
SAVERM59.90

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM90.00
img
SAVERM54.90

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM95.00
img
SAVERM54.90

[004] RG 1/144 MS-06F Zaku II

  • Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  • The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  • F type armor is faithfully reproduced. 
  • Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  • Adopted the ""Advanced MS joint"". 
  • The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  • Runner x9, Realistic decal x1, Instruction manual

RM95.00
img
SAVERM54.90

[009] RG 1/144 Justice Gundam

  • 9th RG is burdened with the name of the [justice], Justice Gundam! RG elaborate detail to be Usually Mokuseyo 
  • Beam boomerang tip of the shoulder ... The shoulder is the first time a kit is removable, reproduce the beam boomerang. 
  • The exchange of palm (sold separately) ... RG RG compatible with Freedom Gundam Freedom Gundam, Machine can be reproduced in the play scene 2 holding hands. 
  • Connection for the stability of the body ... and ideas for the play Fato~umu -00 stable, equipped with a locking mechanism. In addition, parts are also included support for the display of state (horizontal) -00 Fato~umu during deployment. 
  • ... Lifter connecting portion is detachable reproduction, and the lifter body gimmick it can be stored back to the center. In addition, each battery, and the movable nozzle section. 
  • Equipped with a slide mechanism to reproduce the features of its own ... RG lifter by actual historical research. The aircraft during deployment Slide the left and right, extended width. By this gimmick, to shoulder a gun without a detachable part of Fato~umu -00 It is possible to move. 
  • ZAFT forces based on the GAT series was taken from the Union ZGMF-X09A Justice Gundam ... MS was developed. In the sister machine of Freedom Gundam, machines with N jammer canceller. - Accessories: beam saber, beam boomerang, shield, beam rifle, palm (right), Rifle hand grip (right) ( This is a machine translation. Please allow for possible misinterpretations in the text. ) 
  • Item Size : 31 x 19 x 8 cm

RM95.00
img
SAVERM64.90

[010] RG 1/144 Zeta Gundam

  • RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
  • RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
  • As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
  • Zeta Gundam appeared -.
  • The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
  • Adopt a new joint MS Advanced mode.
  • Comes with realistic decals.
  • Accessories: beam rifle, shield, grenade × 2, beam saber × 2,
  • Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

RM115.00
RM115.00 Add to cart
img
SAVERM59.90

[011] RG 1/144 Destiny Gundam

  • RG 11 bullet will be Destiny Gundam protagonist machine [Mobile Suit Gundam SEED DESTINY]
  • Finally here!
  • Also made by the Freedom Gundam ZAFT, Gundam and Justice
  • Destiny Gundam. Dropped into the [real] and its setting in this product,
  • Are using the Advanced mode in common with MS MS joint above. However,
  • At the same time to pursue your own settings to reproduce the Destiny Gundam, the exterior parts
  • How to install or Ikashi are the ones that are different from the previous two products RG series of body
  • Has become.
  • Armored division fine considering the actual machine, unique feature of RG. Such as the joints,
  • You can put a realistic decals, plans to reproduce the metal-like texture.
  • Also boasts a wide range of range of movement in the air `` poses unique appearance ?? SEED
  • Advanced mode can be reproduced by the joint MS.
  • Long-range beam cannon weapon variety, such as a beam shield included.
  • Also a characteristic wing, three-dimensional by actual investigation. Can be replicated gimmick wings and weapons deployment.
  • Accessories: beam rifle, beam saber ? 2, beam shield, shield,
  • Beam boomerang ? 2, beam sword, long-range beam cannon

RM90.00
img
SAVERM71.88

[014] RG 1/144 Strike Freedom Gundam


  • The 14th in the RG Series - the Strike Freedom Gundam!
  • From Mobile Suit Gundam SEED, which brought us the Aile Strike Gundam, Freedom Gundam and Justice Gundam as Real Grade kits, we finally get the Strike Freedom Gundam! 
  • Heavily researched, the RG Strike Freedom is the most realistic depiction so far.
  • Advanced MS Joint allows for a huge range of motion and quicker assembly.
  • Reproduce the look of the metal joints using realistic decals. 
  • Gold Advanced MS Joint
  • Designed to replicate the Strike Freedom's characteristic gold inner frame, this is the first RG kit to have a gold-colored inner frame! 
  • Expandable Super DRAGOON Weapon Wing System! 
  • The largest element of the Strike Freedom, the Super DRAGOON system has been reproduced in exact detail according to research done for this Suit, and the interior frame has been molded in gold for an accurate build.
  • Beam Shield
  • Beam Shield reproduced with clear parts.
  • High-Energy Beam Rifles
  • High-Energy Beam Rifles can combine to form Long-Range Beam Rifle.
  • Xiphias 3 Rail Cannons
  • Waist-mounted Rail Cannons are equipped with deployment gimmick.
  • Accessories: Beam Rifle x2, Beam Saber x2, Beam Shield, Movable Hand (Left and Right),
  • Grip Manipulator(Left and Right), Action-Based Joint,

RM108.00
RM108.00 Add to cart
img
SAVERM54.90

[015] RG 1/144 Gundam Exia

  • Line up the first series of RG from the Mobile Suit Gundam 00, Gundam Exia appearance!

  • Is a real grade latest series, it's the 15th of his will, was on the stage of AD

    It is Gundam Exia that appeared in the Mobile Suit Gundam 00. In other words, Gundam Exia
    is present in the world of Jitsuzuki and [AD] the world we live, on the extension of the current science, The aircraft is present. Different from the other Gundam, in the sense of the original in [the real world it is a mobile suit], it is also the concept of the real grade. We sees The go Himotoi from the latest science in the real world of science in 2300 that can not be, Gundam to cross over the present and future of [science] and future, present and [AD], It is so [RG GN-001 Gundam Exia].

  • 1 Point: the pursuit of appearance and a movable mechanism realistic
    It has been omit was included in only Exia that specializes in dogfight, the Gundam of other,
    To the Advanced MS joint mobility configuration "for realizing the movable range similar to a human]
    Equipped. As a result, achieve a range of motion unparalleled among the RG series so far, and a human body basis
    I can enjoy the movement.

  • 2 Point: detail of as a product of the real world of 00 was the stage for the future of the 2300's year of Jitsuzuki and the world we live. Of Exia There should be an extension of energy science is the current design features [GN Drive. The state-of-the-art technology for transmitting light energy to transfer the energy [GN code] Interpreted as material that has evolved from the plasma tube array], from the plasma tube array 
    Texture to the image, you have to pursue the details.

  • GN Drive is removable.

  • GN condenser realistic by the clear parts and decals. GN particle supply code

  • Reproduced by the hologram PET.

  • Ebi himself, who was in charge of the mechanic design of Gundam Exia is thorough supervision. A new Marking the design.

  • Shield and sword comes, seven were derived from development code of the Seven Swords.

  • Accessories: GN Sword, GN shield, GN beam saber x 2, GN beam dagger x 2, GN Short Blade, GN Long Blade

RM95.00
img
SAVERM59.90

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM90.00
img
SAVERM64.70

[024] RG 1/144 Gundam Gold Frame Amatsu Mina

RG 1/144 Gundam Astray Gold Frame Amatsu Mina


  • Descent to the guardian angel gold frame heaven Mina in the sky of the declaration] from the super popular Gaiden [Mobile Suit Gundam SEED ASTRAY] is RG!
  • RG POINT 1: reproduction of by the new gimmick [Maganoikutachi] -
  • Development and expansion and contraction gimmick mounted in [Maganoikutachi] back.
  • Telescopic mechanism is detail on the basis of the mechanism, such as a real machine of the actuator, reproduce the gimmick.
  • Reproduce the deployment to the storage and front to back.
  • Strengthening `grab` mechanism for as Grapple.
  • Arm movable, expansion and contraction is equipped with the RG own mechanism.
  • RG POINT 2: A new design by own actual historical research -
  • RG POINT 3: realistic armor part texture of heaven Mina -
  • RG POINT 4: first three-dimensional at 1/144 a spear-like weapon of offense and defense together [Okitsunokagami] -
  • Blade and beam shield is reproduced in clear plastic.
  • RG POINT 5: reproduce a variety of equipment of heaven Mina -
  • accessories
- Otsukinokagami × 1
- Torikerosu Kai × 1
- Totsukanotsurugi × 2
- Tsuruhanotachi × 1
- Maganoshirahoko × 2

RM115.00
RM115.00 Add to cart
img
SAVERM107.60

[029] RG 1/144 MSN-04 Sazabi

RG 1/144 MSN-04 Sazabi

  • Experience the RG Sazabi with the largest gimmick of 1/144 scale history.
  • Red comet [Chia . Aznable] dedicated machine appearing in [Mobile Suit Gundam Char's Counter Attack] is made into RG.
  • Various movable gimmicks that can reproduce the posing in the play as well as the mechanism on the airframe setting, and condensed on the 1/144 scale up to the original gimmick by a real machine verification unique to RG!
  • Faithfully reproduce the aircraft, such as arms of arms, funnels etc., based on the sense of setting in the play.
  • Pursue more realism by actual machine verification. A deployment mechanism is installed in the propulsion section of verniers and backpacks.
  • In addition to abundant hand parts, arming that symbolizes Sotheby is attached. Due to various hand parts and high range of motion, both hand holding poses etc. can be reproduced.

[Accessories]
  • Beam shot - Rifle x 1
  • Beam - Tomahawk x 1
  • Beam - saber x 2
  • Shield x 1
  • Funnel x 6
  • Missile x 1

[Product content]
  • Molded article x 17
  • Realistic decal x 1
  • Instruction manual x 1

RM162.00
RM162.00 Add to cart
img
SAVERM64.70

[033] RG 1/144 Force Impulse Gundam

-From [MOBILE SUIT GUNDAM SEED DESTINY], MS featuring the main character [Shin Asuka] in the first half of the story.

-Reproduce the MS form mechanism by combining the core splendor, chest flyer, leg flyer and force silhouette.
-Adopt advanced MS joint with insert molding on core splendor and fuselage. The internal frame and body frame can be separated from the runner in the assembled state, achieving precise details and deformable and movable gimmicks.
-Improved color reproduction by splitting parts, accurately expressing even the finer coloration of adjacent armor.
-As a demonstration of the actual machine unique to RG, force silhouettes are regarded as [aircraft], and gimmicks, details and textures are produced. The wing can be folded backwards.
-The forearm has a structure that can be twisted separately from the elbow. The shoulder armor rotates independently, reducing part interference.
-The waist parts can be moved for each block, greatly securing the range of motion.
-Knee armor moves in conjunction with leg movement.
-In addition to the beam rifle, shield, k nife, and beam saber, four hand parts for each of the left and right, such as a hand grip, a hand, and a weapon holding, are included as options.

[accessories]
* High energy beam rifle x 1
Mobile shield x 1
* Vajra beam saber x 2
* Folding razor vs armored k nife x 2
* Silhouette flyer x 1
Hand parts (left and right) x 4 types each
Realistic decal x 1

RM115.00
RM115.00 Add to cart
img
SAVERM2.00

Third Party Brand RG #37 1/144 God Gundam

Third Party Brand RG #37 1/144 God Gundam


Brand : Third Party
Model : God Gundam
Scale : 1/144
Grade : Real Grade

Please note that this is Not-Bandai product

RM46.00
img
SAVERM83.70

[037] RG 1/144 God Gundam

Bandai RG 1/144 God Gundam

-From [Mobile Fighter G Gundam], [God Gundam] is now available in RG! Pursuing a structure close to the human body, achieving the largest range of motion in RG history!

-Pursuing movement as if tracing the human body unique to mobile fighters.
-With the advanced MS joints introduced on the shoulders and wrists, you can reproduce the characteristic [arms folded] pose.
-Introduced a mechanism that can move greatly back and forth and left and right on the fuselage. A telescopic gimmick is mounted on the shoulder to secure a range of motion on the side.
-A 3-axis movable structure is used for the neck. Movements such as pulling the chin and sticking out the face are possible.
-The expansion and contraction of the muscles that occur in the human body when bending the knee is expressed by denting a part of the back peach parts. The axis where the knee armor sinks is adopted, and the movement just like the human body is reproduced.
-A new mechanism is used to move the toes, allowing the feet to touch the ground while opening the legs almost horizontally.
-Multi-stage movement from the chest to the waist, and by introducing a slide mechanism to the hip joint, it is possible to kick up the legs while flipping up the waist front armor.
-The movable axis at the base of the fin allows the fin to flutter behind.
-The base of the nail and the thumb cover are equipped with a movable axis to reproduce the god finger.
-Comes with an original arrangement of the sun ring effect.

[accessories]
? God slash x 2
? Hand parts x 1 set
? Joint for connecting the sun wheel effect x 1
? PET sheet (sun wheel effect) x 1 set
? Realistic decal x 1

RM126.00
RM126.00 Add to cart
img
SAVERM20.00

Bandai RG 1/144 Nu Gundam with General MS Hangar and Maintenance Dock

Bandai RG 1/144 Nu Gundam with General MS Hangar and Maintenance Dock


Package Content :

1. Bandai RG 1/144 Nu Gundam
2. [Effect Wing] General MS Hangar and Maintenance Dock

This a Combo offer set , limited unit only

RM205.00
RM205.00 Add to cart
img
SAVERM30.00

P-Bandai : RG 1/144 HIGH MOBILITY TYPE ZAKU Ⅱ (TEAM BRIGHT CUSTOM)

** Action base is sold separately

 
Weapon:
Long beam rifle / beam saber / shield

RM230.00
RM230.00 Add to cart
img
SAVERM65.70

RG 1/144 Force Impulse Gundam Spec II

The Force Impulse Gundam from "Mobile Suit Gundam Seed Freedom" is now available as an RG model kit from Bandai in its movie-version specifications! 
The mechanism that becomes the MS form by combining the Core Splendor, Chest Flyer, Leg Flyer and Force Silhouette is included.
An advanced MS joint with insert molding is applied to the Core Splendor and fuselage. 
The internal frame and body frame can be separated from the runner already assembled, which allows for precise details and movable gimmicks. 
The color reproduction has been improved by dividing the parts, with even the minute differences between adjacent armor parts precisely expressed. 
The wings can be folded backwards, and the forearms can be twisted on a separate axis from the elbows. 
The shoulder armor rotates independently to reduce parts interference. 
The waist parts move block by block to ensure a wide range of motion. The knee armor moves in conjunction with the legs. 
Four types of hands for each side are included, as well as a beam rifle, shield, knife and beam saber. New realistic decals are included as well.

Order yours today!

[Includes]:
  • High-energy beam rifle
  • Mobile mantlet
  • Vajra beam saber (x2)
  • Folding Razor anti-armor knife (x2)
  • Silhouette fluyer
  • Core Splendor parts (x1 set)
  • Hand parts (x1 set)
  • Joint parts
  • Realistic decals

RM120.00
RM120.00 Add to cart
img
PO PriceRM135.00

RG 1/144 RX-78-2 Gundam Ver.2.0

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2024
Estimate arrival : SEP 2024

- P-O Price RM135.00
- Deposit RM30.00, Balance RM105.00
- We will inform to make balance RM105.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The latest designed internal frame is inspired by a semi-monocoque structure, allowing you to relive the construction of a mobile suit.
The joint structure, which returns to the original design, has adopted a new structure in which the parts that look like joints bend properly by reinterpreting the movable axis.
The legs are a reconsideration of the hand-to-hand combat MS Gundam and use composite frame joints to draw an outline similar to that of a human when it moves.
Details are engraved on parts that are not visible from the outside, such as joints and the backs of parts. It has a flawless design that eliminates conspicuous mounting holes and integrates it with the design.
The intricately colored head is thoroughly reproduced by color-coding by molding color. Details have been added down to the smallest details such as the twin eyes, main camera, magazine drum, and cheek duct.
Panel lines that reflect the support from the mechanism are divided into functional blocks. It is designed with the image of the actual dividing line in mind.
The exterior design is a fusion of the latest interpretation and a return to origins, not only by adding small details, but also by taking into account the overall shape of each part, such as the edges and curved surfaces. By composing the white body with two-tone molding colors, the amount of information (shading) as a three-dimensional object is fully produced.
Core Fighter can be transformed into Core Block. In addition to reproducing the proportions of the aircraft form, the newly developed auxiliary joint gimmick is built into the compact core block, contributing to the realization of free posing of the Gundam.
As an RG original gimmick, the chest armor covering the cockpit opens and closes up and down.

[Accessories]
Beam rifle x 1
Beam saber x 2
Shield x 1
Hyper bazooka x 1
Landing gear parts for core fighter x 1 set 
Hand parts x 1 set
 Realistic decal x 1

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
PO PriceRM300.00

RG 1/144 Akatsuki Gundam (Oowashi equipped)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2024
Estimate arrival : JAN 2025

- P-O Price RM300.00
- Deposit RM30.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
  • From "Mobile Suit Gundam SEED DESTINY", the Akatsuki Gundam equipped with the Steller's Eagle is plated in three types of gold and turned into a RG figure!
  • The multi-faceted shape of the Gundam makes the whole body shine, and the angle of light reflection is adjusted to express the glittering coating of the "Yata no Kagami".
  • The Steller's Eagle's nose, hatch, beam cannon, etc. are deployed. Both wings can also move flexibly, and it can be reproduced when attached to the main body.
  • By using some of the frame parts of the RG Strike Gundam, the same action is achieved.
  • The shoulders have a pull-out mechanism to expand the range of motion. The hip joints can also be opened widely, allowing for bold poses.
  • Equipped with a swing gimmick for the torso and a sliding gimmick for the armor on the arms and legs. It can be moved according to the pose.
  • Equipped with a movable gimmick on the vernier on the top of the shoulders and the side of the legs.
  • Realistic decals reproduce the markings on the whole body.
  • Compatible with the separately sold "HG 1/144 Destiny Gundam Spec II & Zeus Silhouette", so the Zeus Silhouette can be attached.
  • * To attach the Zeus Silhouette, you will need the "Zeus Silhouette Connection Parts" included with the "RG 1/144 Akatsuki Gundam Shiranui Pack" (tentative name, sold separately), which will be available for order at Premium Bandai at a later date.

[Accessories]
  •  Beam saber (connected) x 1
  •  Beam rifle x 1
  •  Shield x 1
  •  Hand parts x 1 set
  •  Realistic decal x 1
  •  Display base x 1

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Add to cart
img
SAVERM60.00

P-Bandai RG 1/144 Tallgeese III


Premium Bandai has finally announced the release of the 3rd variant of the Tallgeese! The Tallgeese III will be rolling out with newly molded equipment, and new set of decals.

[ACCESSORIES]
-Mega Cannon
-Heat Rod
-Shield
-Beam Saber

RM170.00
img
SAVERM59.80

[031] RG 1/144 Crossbone Gundam X1

RG 1/144 Crossbone Gundam X1 

The Real Grade Crossbone Gundam launches in May! This kit is a part of the GUNDAM EVOLUTION PROJECT which offers "extreme details" that features extended articulation for the RG framing and additional exploration to its part separation!

More images and info will be added later.

[ACCESSORIES]

  • Anti beam cloak
  • Beam Zanber
  • Core Fighter
  • Buster Gun
  • Beam Shield / Brand Marker

RM90.00
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
img
SAVERM40.00

[EXPO] RG 1/144 Gundam OO Raiser Special Clear Color Expo Edition

The genuine EXPO RG 1/144 Gundam 00 Raiser Clear Colour (stand not included).



RM180.00
img
SAVERM30.00

P-Bandai : RG 1/144 Banshee Norn Final battle Ver.

RG Banshee Norm Final battle Ver.


Release Date : March 2019
Estimate Delivery : April 2019

RM230.00
img
SAVERM40.00

P-Bandai: RG 1/144 Banshee's Armed Armor VN /BS Equipment

P-Bandai: RG 1/144 Banshee's Armed Armor VN /BS Equipment 
Release Date: April 2019
Estimate Delivery: May 2019 

Kit comes with a fully articulated Armed Armor Vibration Nails [VN] and Armed Armor Beam Smart gun [BS] that can be transformed into Destroy and Unicorn mode! This expansion set is compatible with any RG Unicorn Gundam model kit.

RM95.00
img
SAVERM69.00

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom


This kit comes with a new set of decals and slightly remolded head armor piece to accommodate its antenna.

The black part of the head can reproduced by applying a decal seal that comes with the kit.

[ACCESSORIES]

  • * Giant Bazooka
  • * Zaku Bazooka
  • * Zaku Machine Gun
  • * Heat Hawk

RM170.00
img
SAVERM91.60

[032] RG 1/144 V Gundam / Nu Gundam

Amuro lay boarding aircraft appeared in [Shizua of Mobile Suit Gundam counterattack] lineup in RG!

-Various gimmicks to reproduce the setting mechanism and the poses in the play, and the original gimmicks based on real machine test results are condensed to 1/144 scale.
-With precise parts configuration, it creates both 1 / 1s image and enjoys both fun and decorating.
-Gundam's distinctive coloring is reproduced in molded color. The white body uses three light gray molded colors to increase information density.
-Joints are built into the shoulders and abdomen, and can move flexibly. It enables twisting and shoulder extrusion, resulting in more dynamic posing.
-Armor on the shoulder has a built-in mechanism that expands in tandem with the internal joint. By expanding the range of motion of the shoulder, reduce the interference between parts that occur in posing etc. holding an arm.
-The lumbar joint moves finely for each block, expanding the movable range of the leg. The knee can be pushed forward widely, and a powerful pose with a wide stance can be produced even at 1/144 scale.
-The legs are equipped with [Multilink Gimmick] where the armor slides in conjunction with the movement of each joint. Poses with large knees are also reproduced naturally.

[accessories]
Beam  rifle x 1
Fin *  Funnel x 6
New hyper bazooka x 1
* Shield (Beam *  Canon) x 1
* Beam saber (backpack part, arm part) x 1 each
Missile x 1 type

[Item content]
Molded articles x 13
Realistic decal x 1
* Instruction manual x 1

RM160.00
img
SAVERM70.00

P-Bandai: RG 1/144 Perfect Strike Gundam

The Mobile Suit Gundam SEED HD Remaster's take on Aile Strike Gundam has been added to the Real Grade kit lineup! With the newly molded Striker pack and battery pack system.

The kit also comes with new support pieces to accommodate the weight of its backpack and weapons. A new set of decal is also packed for detailing.

[ACCESSORIES]

-Beam Rifle
-Shield
-Armor Schneider x 2
-Beam Saber x 2
-Battery Pack x 4
-"Schwert Gewehr" 15.78m Anti-ship Sword
-"Panzer Eisen" Rocket Anchor
-"Midas Messer" Beam Boomerang
-"Agni" 320mm Hyper Impulse Beam Cannon

RM250.00
img
SAVERM134.40

RG 1/144 Nu Gundam (v Gundam) with Fin Funnel Effect Set

Bandai Spirits will be releasing a Real Grade nu Gundam that comes with figure-rise jet effect parts for the fin funnels and a clear action base 4 to display the finished model. All six fin funnels can be displayed with the help of its mounts with jet effect parts attached.

-[RG 1/144 ? Gundam], Action Base 4 Clear x 1, Figure-rise Effect Jet Effect (Clear Yellow) x 2 set.
-Display all 6 included fin funnels with effects!
-Can also be used with [RG 1/144 Sazabi] (sold separately).

[ACCESSORIES]
Beam Rifle
Fin Funnel x6
Nu Hyper Bazooka
Shield (Beam Cannon)
Beam Saber (backpack and arm) x 1 each
Missile x 1
Figure-rise jet effect parts
Action Base 4 (clear)

RM225.00
Real Grade Gundam (RG) is a line of Gundam Kits that was first introduced in 2010 as part of Bandai 30th Anniversary Commemoration Project. RG lines are 1/144 scale kits featuring an advanced articulation of the Perfect Grade (PG) kits, a full inner frame of the Master Grade (MG) kits and affordability of High Grade (HG) kits. The Real Grade line are designed to be realistic in terms of detail and color. It also used the Advanced MS Joint for its body inner frames. The tagline for the RG line is Excitement Embodied.

Showing 1 - 30 of 89 products