Price Clear







Showing Gundam Model Kits + SD CS / CROSS SILHOUETTE product(s)

Showing 1 - 30 of 35 products

img
SAVERM49.80

SD Ex-Standard Gundam Cross Silhouette Hello Kitty / Zaku

- Hello Kitty and Gundam, the second dream collaboration project
- A set of Zaku II and Hello Kitty comes up from the SDCS series

- Easy assembly without adhesive.
- The combined form of Zaku II and Hello Kitty can be reproduced.
- Abundant items for Zaku are included.
- It is possible to have the small apple parts included in the hand of Kitty.
- Kitty can also sit and pose.
- With apple parts and apple-shaped pedestal.

[accessories]
- Set of equipment
- Apple x 1
- Apple pedestal x 1
- Foil seal x 1
- Tetron seal x 1

RM100.00
RM100.00 Add to cart
img
SAVERM31.80

[18] SD Gundam Cross Silhouette Tornado Gundam

The Tornado Gundam from the "SD Gundam G Generation" series joins the "SD Gundam Cross Silhouette" lineup! 
The gatling gun on its arm can be displayed in normal or deployed state by attaching and detaching parts; the beam saber can also be connected. 
It comes with both a CS frame and an SD frame, so it can be built with the proportions you prefer!
Each part of the binder on its back is movable, and it comes with interchangeable hands and a variety of weapons, such as a beam rifle. Order it for your own collection today!

[Includes]:

- Interchangeable hands (x1 set)

- Gatling gun

- Beam rifle

- Beam saber (x2)

- Stickers

RM64.00
img
PO PriceRM40.00

1/1 Charzaku-kun DX Set (with runner ver. recreation parts)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUN 2025
Estimate arrival : MAY 2025

- P-O Price RM40.00
- Deposit RM10.00, Balance RM30.00
- We will inform to make balance RM30.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

* Introducing Chars Zaku-kun from Gunpla-kun, which conveys the fun of Gunpla
* You can also display it in the runner version by selecting it! Familiar equipment is also included
* Display Char's Zaku-kun in either the normal version or the runner version by selecting it.
* Also includes familiar equipment such as the heat hawk, Zaku machine gun, and Zaku bazooka.
* Mono-eye can move left and right.
* Collect the separately sold Gunpla-kun series plastic models and display them in the style of the movie!

[Accessories]

* 1x runner part
* 1x heat hawk
* 1x Zaku machine gun
* 1x Zaku bazooka
* 1x display pedestal

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Add to cart
img
SAVERM14.00

[02] SD GUNDAM CROSS SILHOUETTE CROSSBONE GUNDAM X1

- CS frame is excluded and have to purchase separately. 

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.

RM34.00
img
SAVERM26.00

[03] SD GUNDAM CROSS SILHOUETTE NIGHTINGALE

- CS frame is excluded and have to purchase separately. 


SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.

RM58.00
img
SAVERM12.00

[OP-01] SD GUNDAM CROSS SILHOUETTE CROSS SILHOUETTE FRAME [WHITE]

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.

RM24.00
img
SAVERM28.00

SD GUNDAM CROSS SILHOUETTE RX-78-2 GUNDAM & CROSS SILHOUETTE FRAME SET

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.


Content:
- 1 x RX-78-2 Gundam
- 1 x SD Frame
- 1 x CS Frame

RM56.00
img
SAVERM13.90

[04] SD GUNDAM CROSS SILHOUETTE ZAKU ?

SD GUNDAM CROSS SILHOUETTE ZAKU ?


The Zaku II strikes! A mass-produced MS with an abundance of weapons is joining the SD Cross Silhouette series! Utilizing a gray frame, the Zaku II can also combine the with BAN230354 CS Frame (sold separately) to allow for taller proportions! Clear parts are used on the mobile suit's mono eye and includes an articulation gimmick which uses a rail. The iconic Zaku Machine Gun, Zaku Bazooka, missile pod, and Heat Hawk are all included!

Accessories:
  • Zaku Machine Gun x1
  • Zaku Bazooka x1
  • Missile pod x2
  • Heat hawk x1

Set Content:
  • Runner x3
  • Foil sticker sheet x1
  • Instruction manual x1

RM34.00
img
SAVERM17.90

[05] SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM

SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM


- Zeta Gundam, the protagonist of [Mobile Suit Z Gundam] appears in the series that can enjoy two silhouettes [SD Gundam Cross Silhouette] series!

- Reproduce distinctive coloring.
- Combined with [SD Gundam Cross Silhouette Frame] (sold separately), it is possible to upgrade high head and improve mobility.
- [Z Zaku] that appeared in [ZZ Gundam] in combination with [SD Gundam Cross Silhouette Zaku II] can be reproduced.

- accessories
Beam rifle x 1
* Shield (grenade launcher) x 1
* Beam * saber x 1

- Product content
* Molded product x 3
* Foil seal x 1
* Instruction manual x 1

RM42.00
img
SAVERM11.90

[OP02] SD GUNDAM CROSS SILHOUETTE CROSS SILHOUETTE FRAME [GRAY]

SD GUNDAM CROSS SILHOUETTE CROSS SILHOUETTE FRAME [GRAY]

Combine with other SD Gundam Cross Silhouette line items to recreate the tall proportions for each MS! Like, the White version, this also includes different attachment points and is compatible across the SDCS line. This frame includes a GM head.

Content:
- Runner x1
- Instruction manual x1.

RM24.00
img
SAVERM19.90

[06] SD GUNDAM CROSS SILHOUETTE GUNDAM 00 DIVER ACE

[06] SD GUNDAM CROSS SILHOUETTE GUNDAM 00 DIVER ACE


- The main character of [Gundam Build Divers], Gundam Double Oh Diver Ace appeared in the SD Gundam Cross Silhouette series!

- Camera eye with pupil is reproduced with a seal.
- Combined with an optional cross silhouette frame, you can enjoy changing style and high mobility.
- By attaching and detaching the diver ace unit, the double o diver is also reproduced!

[accessories]
- GN Sword II x 2
- Diver Ace unit x 1 formula
(GN Diver Sword x 2 Super GN Sword II Parts x 2 Backpack x 1)

[Product content]
- Molded product x 4
- Foil seal x 1
- Instruction manual x 1

RM40.00
img
SAVERM23.90

[07] SDCS GUNDAM CROSS SILHOUETTE UNICORN GUNDAM 03 PHENEX (DESTROY MODE) (NARRATIVE Ver.)

SD GUNDAM CROSS SILHOUETTE UNICORN GUNDAM 03 PHENEX (DESTROY MODE) (NARRATIVE Ver.)


- Using clear parts throughout the body, 3D / BB warrior Unicorn Gundam three-dimensional fenex with the best color reproduction ever !

- The parts of the tail wings added at [Mobile Suit Gundam NT] can move and produce a natural look.
- Beam -  ? Magnum, Beam . Saber, Armedo Armor DE are included.
- By attaching the exterior parts to the optional cross silhouette frame, it is possible to reproduce the high head body . high movable form.
- SD frame (gray) is included.

[accessories]
- Armed Armor DE x 2
- Beam -  ? Magnum x 1
- Beam saber x 1

[Product content]
- Molded product x 4
- Foil seal x 1
- Instruction manual x 1

RM48.00
img
SAVERM35.80

[026] SDBD RX-Zeromaru Sinkikessho (Crime Crystal)

Zeromaru's enhanced weapon form, which bears a resemblance to the Full Armor Unicorn, appears! Includes 3 shields, bazooka parts, 2 kunai, katana, rifle, effects, and 2 hand parts. Can also transform into "Real Mode" which resembles a normal proportioned Gundam. Runner x 6, stickers,instruction manual.

Accessories:
New Shield x 3
- Bazooka Barrel Parts x 2
- Kunai x 2
- Sword
- Rifle
- Effect Part
- Wrist - 2 types (left and right) x1 each

RM72.00
img
SAVERM19.90

[08] SD GUNDAM CROSS SILHOUETTE FREEDOM GUNDAM

The SD Gundam Cross Silhouette series allows you to choose between two different inner frames that will change the proportions of your kits. You can choose between the cuter look of the SD (Super Deformed) frame, or the taller and more action-packed look of the CS (Cross Silhouette) frame!

The Freedom Gundam comes with the SD frame; the CS (Cross Silhouette) frame is sold separately, and you can use either one to build it! Extremely fierce despite his small size and cute appearance, he's packing his signature weapons.


Accessories:
- Lupus beam rifle
- Beam shield
- Lacerta beam saber (x2)
- Foil stickers for markings

RM40.00
img
SAVERM30.70

[09] SD Gundam Cross Silhouette Sisquiede

A new generation of super-deformed kits is here! The SD Cross Silhouette series allows you to choose between two different inner frames that will change the proportions of your kits. You can choose between the cuter look of the SD (Super Deformed) frame, or the taller and more action-packed look of the CS (Cross Silhouette) frame! (This kit only includes the SD frame.)

The Sisquiede from the "SD Gundam: G Generation: Monoeye Gundams" joins the Cross Silhouette family, in its AEUG colors! Its monoeye is realistically reproduced with a jewel sticker, and its flexible binder enables you to change it into its high-speed cruising form! It's equipped with its I-Field Launcher and two beam sabers, too. 


Accessories:

- I-Field Launcher
- Beam sabers (x2)

RM53.20
img
SAVERM15.90

[14] SD Gundam Cross Silhouette MS-06S ZAKU II

-[Char's Zaku II] is now available in the SDCS series, where you can enjoy the combination!

-Coloring is reproduced with molding color.
-Mono eye is movable!
-Includes a short life frame (gray).
-Comes with abundant armament that colors posing.

[accessories]
  • Zaku Machine Gun x 1
  • Zaku Bazooka x 1
  • Heat Hawk x 1
  • Foil seal x 1

RM32.00
img
SAVERM13.10

[OP-06] SD Gundam Cross Silhouette Cross Silhouette Frame [Green]

-Green color appears in the cross silhouette frame with excellent mobility!
-You can make SD cross silhouette taller!

[accessories]
Cross silhouette frame [Green] x 1

RM22.80
img
SAVERM11.90

[OP-04] SD Gundam Cross Silhouette Booster (Gray)

- Extended parts set appeared in the SDCS series!

- By attaching to an existing frame it is possible to reproduce even higher head and low head, and expandable to your head.
- Hirate (left and right), hand grip (left), saber possession (right) are included.
- Futosumo parts available for SDCS Zaku II are included.
- You can make [Jim] by combining this product with Jim Head and SDCS Gundam which is included in the optional SDCS frame.

[accessories]
* Hand parts x 1 formula
Frame custom parts x 1 formula
Parts for gym x 1 formula

[set content]
Molded product x 1
Seal x 1
Instruction manual x 1

RM24.00
img
SAVERM19.90

[13] SD Gundam Cross Silhouette Wing Gundam Zero EW

-The [Wing Gundam Zero EW] has appeared from the SDCS series that is particular about [color reproduction, detail modeling, movable]!

-Due to the high movable specification, the characteristic posing in the play can be reproduced!
-The Twin Buster rifle shooting pose can be reproduced with the SD frame.
-By moving the arm and closing the wing, you can reproduce the atmosphere rush pose.
-The head is rearranged, and the presence or absence of the pupil is selected.
-A twin-buster rifle that can be combined and separated is included. It can be held in both hands in a separated state.
-By linking with the CS frame (sold separately), more detailed expressions are possible, and you can enjoy it with your favorite proportions.

[accessories]
-Twin buster rifle x 1 set
-Foil seal x 1

RM40.00
img
SAVERM11.90

[OP-05] SD Gundam Cross Silhouette Cross Silhouette Frame [Red]



-Red color appears in the cross silhouette frame with excellent mobility!
-You can make SD cross silhouette taller!

[accessories]
  • Cross silhouette frame [Red] x 1

RM24.00
img
SAVERM23.90

[15] SD Gundam Cross Silhouette Earthree Gundam (SD)

Earthtree Gundam from "Gundam Build Divers Re: RISE," gets an SD Gundam Cross Silhouette kit from Bandai! He features a core Gundam form and external armor parts that attach easily. Get yours today!

[Includes]:

  • Rifle
  • Shield
  • Foil stickers for markings

RM48.00
img
SAVERM12.40

[OP-09] SD Gundam Cross Silhouette Silhouette Booster 2 [White]

- A luxurious set that further expands the play of existing line-up products.
- Reproduce the wave rider by attaching [SDCS Zeta Gundam] sold separately.
- The Zaku I reproduction exterior can easily reproduce the Zaku I head even with a single item. Dummy parts for the mono eye are also included.
- 2 types of [joint brush-up parts] that can add a swing mechanism to the hip joint are included.
- [Upgraded thigh parts for CS frame] is designed to cover the seams of parts.
- Comes with a general-purpose expression hand and beam saber.

[Accessories included]
- Swing hip joint parts for CS / SD frame x 1 each
- Square thigh parts for CS frame x 2
- General-purpose facial expression hand x 2
- Zaku I reproduction parts x 1 set
- Zeta Gundam Wave Rider Reproduction Parts x 1 set
- Beam saber x 2

RM23.50
img
SAVERM27.90

[16] SD Gundam Cross Silhouette Gundam Barbatos Lupus Rex

-From [Mobile Suit Gundam: Iron-Blooded Orphans], the final boarding machine of the protagonist Crescent Moon [Ruplex] is lined up in the SD series

-The sub-arm deployment gimmick of the arm is reproduced without replacement of parts.
-Lead wire is used for the back tail blade. The scene in the play can be reproduced with more dynamic poses.
-Camera eye is green or red. Comes with two kinds of seals that reproduce the eyes!
-Includes two types of frames, CS and SD! A special color that follows the HG series `Gundam Frame`. By selecting a frame, you can enjoy two forms of CS frame and SD frame.
-Reproduce the color of the open nails with the molding color.

[Accessories included]
* Super large mace x 1
* Replacement hand parts (open left and right, grip left and right) x 1 each
* Replacement eye parts x 1
* Lead wire x 1
* Foil seal x 1

RM56.00
img
SAVERM35.80

[17] SD Gundam Cross Silhouette RX-78-2 Gundam & MS-06S ZAKU II

-Gunpla 40th Anniversary! [RX-78-2 Gundam] and [Char\'s Zaku II] come out as a special color Ver. Set from the SDCS series!

-Includes 2 CS frame and various weapons.
-Let\'s reproduce that famous scene on the cross display!

[accessories]
* Beam saber x 1
* Beam rifle x 1
* Shield x 1
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Missile pod x 2
* Foil seal x 2

RM72.00
img
SAVERM49.80

SD Ex-Standard Gundam Cross Silhouette Hello Kitty / Zaku II Principality of ZEON Char Aznable Mobile Suits

- Hello Kitty and Gundam, the second dream collaboration project
- Char\'s exclusive Zaku II and Hello Kitty set comes out from the SDCS series

- Easy assembly without adhesive.
- The united form of Char\'s Zaku II and Hello Kitty can be reproduced
- Abundant items for Zaku are included.
- It is possible to have the small apple parts included in the hand of Kitty.
- Kitty can also sit and pose.
- With apple parts and apple-shaped pedestal.

[accessories]
- Set of equipment
- Apple x 1
- Apple pedestal x 1
- Foil seal x 1
- Tetron seal x 1

RM100.00
img
SAVERM20.00

THE GUNDAM BASE LTD SD GUNDAM CROSS SILHOUETTE RX-78-3 G-3 GUNDAM (CROSS SILHOUETTE FRAME)

THE GUNDAM BASE LTD SD GUNDAM CROSS SILHOUETTE RX-78-3 G-3 GUNDAM (CROSS SILHOUETTE FRAME)

RM68.00
img
SAVERM35.80

SD Gundam Cross Silhouette Mighty Strike Freedom Gundam

The Mighty Strike Freedom Gundam from Mobile Suit Gundam SEED FREEDOM is made into a three-dimensional model using SDCS!

Two types of frames are included: high head (CS) and low head (SD) unique to SDCS. Reproduce the characteristics of the aircraft with gold molding color.

By replacing the parts inside the head, you can choose whether or not it has eyes.

Proud Defender can reproduce flight status. The wing armor can be slid to reproduce the deployed state.
The anti-ship sword Futunomitama is included, reproducing the dual-wielding state with a beam saber.
The forehead beam cannon reproduces the firing state by opening and closing the parts.
The waist railgun unfolds to reproduce the simultaneous firing situation.
Beam saber and beam rifle both reproduce the connected gimmick.

[Accessories]
- Anti-ship sword (futsunomitama) x 1
- Beam rifle x 2
- Beam saber x 2
- Head parts x 1
- Seal x 1

RM72.00
img
SAVERM43.80

[19] SD Gundam Cross Silhouette: Unicorn Gundam 2 Banshee (Destroy Mode) & Banshee Norn Parts Set

The Unicorn Gundam 2 Banshee in Destroy Mode joins the "SD Gundam Cross Silhouette" model-kit lineup from Bandai! It comes with a smaller SD frame, as well as a slightly taller CS frame with more realistic proportions; a wealth of weapons that can reproduce the Banshee and Banshee Norn are included too. Three types of armed armor and a revolving launcher are included, all newly molded; 3D metallic seals for the Armed Armor BS is included, as are two types of eye expression stickers. Order this adorably cute yet still very feisty robot for your own collection today!

[Includes]:

  • Armed Armor BS
  • Armed Armor VN
  • Armed Armor DE
  • Armed Armor XC
  • Beam Magnum
  • Revolving launcher
  • Beam saber (x2)
  • Seals
  • 3D metallic seals

RM76.00
img
SAVERM19.90

1/1 Gunpla-kun DX Set (with Runner Ver. Recreated Parts)

Gunpla-kun is here in color! Gunpla-kun is made of LIMEX -- a new material that combines environmental consideration with the fun of plastic model kits! LIMEX ia a new eco-friendly material that contains more than 50 percent limestone as the main raw material, greatly reducing the use of conventional petroleum-derived plastics. This is the first time in history that LIMEX has been molded in full color! You can build Gunpla-kun into a full figure as shown here, or you can assemble him partially with some of the parts still on the runners and display him that way! He comes with his familiar armaments, such as the beam rifle, beam saber and shield. Order him today!

[Includes]:

  • Runner parts
  • Stickers
  • Beam saber
  • Beam rifle
  • Shield
  • Base for display

RM40.00
img
SAVERM37.80

[03] SD Gundam Cross Silhouette: F-Kunoichi Kai

The Kunoichi gunpla F-Kunoichi Kai that appears in the "Gundam Build Series" upcoming 10th anniversary video "Gundam Build Metaverse" is now a member of the "SD Gundam Cross Silhouette" model-kit series from Bandai! Two types of frames are included with this kit: use the SD frame for a cuter, more super-deformed appearance, and use the CS frame for a taller, more elongated look. The robot can be displayed in its Maximum Output Mode and Light Mode with parts exchange; effect parts and weapons are included too. It's compatible with the Legend BB Musha Gundam, Knight Gundam and Command Gundam (all sold separately) for super-deformed Gundam ninja action! Order yours today!

[Includes]:
- Kunai (x2)
- Ninja sword
- Effect parts
- Joint parts
- Stickers

RM70.00
SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits introduced by Bandai in June 2018. This series features inner frame technology (SD and CS Frame), similar to Real Grade and Master Grade kits but on a smaller scale.

So, what exactly is the difference between SD and CS Frame? CS frame has longer and better articulation compared to shorter SD Frame.

Showing 1 - 30 of 35 products