Price Clear







Showing MS GUNDAM UNICORN product(s)

Showing 1 - 30 of 161 products

img
SAVERM108.90

MG 1/100 RX-0 Unicorn Gundam 02 Banshee

This black variant of the Gundam Unicorn first revealed in episode 4 of “Mobile Suit Gundam Unicorn,” features an all dark and yellow color scheme with a special translucent orange-yellow frame that shines under a black light meant to simulate the fiery glow of the “Psycho Frame”. This MG version features the OVA exclusive weapons, the Armored Arm VN and Armored Arm BS that mount on its arms and is fully transformable between Unicorn and Destroy Mode. Molded in colors meant to represent a black lion, complete with golden mane and requiring no glue for assembly, the Banshee is a must have Gundam design from “Gundam Unicorn”. Other accessories include 4 beam saber handles, 2 beam saber parts, pilot figure x2 (standing, sitting), transformable V-fin x 1 , static V fin x 2 (Unicorn/Destroy).

RM220.00
RM220.00 Add to cart
img
SAVERM35.90

[134] HGUC 1/144 Unicorn Gundam 02 Banshee (Destroy Mode)

  • The second Unicorn Gundam "Banshee" from "Mobile Suit Gundam Unicorn" episode 4 joins the HGUC lineup. 
  • The new armaments seen in the episode 4 are included. 
  • The psycho frames can be seen through the armor.

RM72.00
img
SAVERM28.90

[139] HG 1/144 Juaggu

- ジュアッグ, HGUC-izing of a shock! The time of 刻 for 30 years is exceeded, and it is full renewal!! - Reappear in the figure in which it appeared by episode4. - The canon of nose and an arm is flexibly movable. - Chest mechanical reappearance. - Pausing is also free. - MSM-04G JUAGGU (ジュアッグ) -- It was developed for jab low capture games at the time of "one-year war." Special work MS. U. In C.0096, the brave figure was shown as one corner of the attack party to federal capital Dakar. - Accessories : 3 cannons-equipped-at-a-battery canon (right and left) Item Size : 31 x 19 x 7.5 cm

RM72.00
img
SAVERM31.90

[138] HG 1/144 Marasai Gundam

  • The UC version マラサイ of the Xeon army specification! 
  • Reproduce マラサイ which appeared by episode4 in a green molding color. 
  • The フェダーイン rifle of new modeling is attached. The Spear state is also reproducible. 
  • Reappearance of an ejection state is possible for the one` sea snake ` of armaments at a lead. 
  • Accessories : フェダーイン rifle and beam saber x2, a sea snake Item Size : 31 x 19 x 7 cm
Wikipedia's information
The RMS-108 (MSA-002) Marasai is a second-generation Mobile Suit in the Universal Century timeline. It first appeared in the series Mobile Suit Zeta Gundam.

The RMS-108 Marasai was developed using Zeon design principles combined with technology pioneered by the Earth Federation during the One Year War. Technologically based on the RMS-106 Hizack the Marasai features improved technologies, such as a movable frame , Gundarium Alloy armor instead of a titanium alloy that improves overall defense, greater sensor range, greater acceleration, and a more powerful Minovsky type ultracompact fusion reactor. It is equipped with high-power thrusters that allow atmospheric flight under gravity for a short period of time. 

Alongside its technological improvements the Marasai is also several metric tons lighter than Hizack when measuring its empty weight. The Marasai did not have as a large a weapon selection as the Hizack, however that would be because the Hizack was often equipped with older weapons used by Zakus, such as machine guns and heat hawks, while the Marasai used only advanced beam weapons. The Marasai was also compatible with the ballute system if it needed to conduct and atmospheric reentry on its own.

The standard Marasai's weapons were a rapid-firing beam rifle capable of shooting three beams in rapid succession, a beam saber, and two head mounted Vulcan guns on the sides of its head. A large shield was attached to the right shoulder, much like Zeon's Zaku line of mobile suits.

Originally designed by Anaheim Electronics for the Anti Earth Union Group as the "MSA-002", it was designed to be an all round better version of the RMS-106 Hi-Zack. However, due to pressure from the Titans, Anaheim presented them with the design when the Titans started to turn their attention towards Anaheim support of the AEUG. It was formally adopted and put into mass production as the "RMS-108", being the eighth machine developed at the Granada base.

Many pilots used Marasai's in the Titans and EFSF, most famous is Kamille Bidan's rival, Jerid Massa. While defending the Earth Federation base Jaburo, Jerid's Marasai fought with the RX-178 Gundam Mk-II before being destroyed. Other pilots of the Marasai include Kacricon Cacooler and Sarah Zabiarov. Kacricon was killed in a Marasai by Kamille Bidan, who destroyed his Ballute, causing him to burn up in the atmosphere.

Despite initially being used by an organization whose very duty was to seek out and destroy anti-Federation or revivalist Zeon movements, after the Gryps Conflict the Marasai would be used almost exclusively by Neo Zeon movements. After the Gryps Conflict ended, the Earth Federation sought to distance itself from connection to the Titans, which included abandoning numerous mobile suit designs that were used by the Titans (no matter how effective they were). The abandoned Marasai were picked up by the first Neo Zeon, Haman Karn's Zeon, who used the machines to fill out their ranks. After the First Neo Zeon War many of the Marasai had been destroyed. Some of those that survived would be used by old Principality of Zeon remnants, who would repaint the Marasai in their own distinctive green color scheme.

During UC 0096, several of the RMS-108 were used by Zeon remnants to attack the Federation's Torrington Base. One of these units would later be destroyed by the RX-160S Byarlant Custom. Another one of these units were destroyed by regrouping Earth Federation forces during the Federation counterattack.

Weapons
  • Beam Saber - Stored on the shield when not in use, this particular beam saber has a noticeably longer handle compared to others.
  • Vulcan Gun - A pair of Vulcan guns are mounted into the Marasai's head. These projectile weapons are designed for intercepting missiles and destroying lightly armored vehicles.
  • BR-87A Beam Rifle - A standard armament for ranged combat. The rifle used by the Marasai was unique in its ability to change its rate of fire.
  • Shield - Mounted on the right shoulder, this weapon serves as the Marasai's primary means of defence and is also used as a storage rack for its beam sabers.
  • Feyadeen Rifle/Beam Saber
  • Sea Serpent - Originally used by the RX-139 Hambrabi, this weapon was used by one particular Marasai unit during the Zeon attack on Torrington base.

RM64.00
img
SAVERM27.90

[140] HGUC 1/144 MSA-003 Nemo (Unicorn Ver.)

- An update of a classic design, Mobile Suit Gundam Unicorn`s Nemo joins the HGUC line!

- Rear waist features a dual beam saber mount.
- Features high-powered backpack thrusters.
- Includes optional hand parts and full arsenal.
- The EFF`s classic mass-produced Nemo Suit is still in use years after its time as a frontline Suit. Fielded at Torrington Base in UC 0096 to combat the rising Neo Zeon threat, this Suit still holds up 9 years after its use in the Gryps conflict.

- Accessories : GM Rifle, Shield, Beam Saber x2, Fist (Left, Right), Open Palm (Left, Right), Grip Manipulator (Left, Right), Rifle Manipulator (Right)

RM62.00
img
SAVERM17.90

[144] HGUC 1/144 Base jabber Gundam

- HGUC commercialized in the base-Jabbar of the big success in aerial combat of [Black Unicorn] episode 5! - Expansion and contraction of the foot corresponding to the various MS Panel! - In an action-based support, reproduce powerful battle scenes! Use the included landing gear (It is also possible to get to the ground. ) - Sub-flight system for the operation of the base-Jabbar in the air ... MS (SFS). Jet heat kernel With a function-propelled hovercraft. Geta `alias`. - Accessories: Landing Gear (closed-open)According to wikipediaThe Base Jabber is a single MS Carrier/Flight System that first appears in the anime series Mobile Suit Zeta Gundam. It is designed to have a Mobile Suit stand on top of it as it flies. Using this sub flight system, mobile suits which have extremely sloppy movement speed under gravity, can improve its mobility, while gaining limited flight capability, and hence able to accomplish operations swiftly and solidly.Weapons- Mega Particle Canon: The forward section of the carrier has a Mega Particle cannon which is mainly seen used for support during battle.

RM42.00
img
SAVERM51.90

[148] HGUC 1/144 Gundam Delta Kai

  • Accessories
  • Long Mega Buster, shield, high-Mega Cannon, proto fin funnel x 2, Beam saber x 2, saber grip (left and right), fist (left and right), rifle grip (right). 
 
According to wikipedia 
The MSN-001X Gundam Delta Kai (pronounced 'Kai') (aka ? Kai or ??) is a prototype transformable mobile suit developed from the MSN-001 Delta Gundam as a technology demonstrator. It appears in the PlayStation 3 video game Mobile Suit Gundam UC (The Postwar) and UC-MSV. In overall appearance, the Gundam Delta Kai is an enhanced version of the Delta Gundam, which incorporates new technologies that can be used for future mobile suits. It also has a specialized Psycommu system installed called the Nitro System, which grants an ordinary pilot Newtype abilities. The Gundam Delta Kai is also armed with standard vulcan guns, a long mega buster, two beam sabers and a shield. But also equipped with two fin funnels on its back.
 
Weapons 
  • Vulcan gun: The vulcan gun has been a standard armament of Federation suits since the One Year War. While not very powerful and typically unable to penetrate mobile suit armor, the vulcan gun is useful in intercepting missiles/rockets, destroying mobile suit sensors, and engaging lightly-armored targets such as tanks and small aircraft. 
  •  Long Mega Buster: A specialized Beam Rifle with a power output comparable to a beam cannon. It was developed from the RX-78-4 Gundam Unit 4 "G04"'s Long Beam Cannon. 
  • Beam Saber: The Delta Gundam Kai's close combat armaments. It is able to melt through most armor and destroy most mobile suits in one strike. 
  • Shield: The Delta Gundam Kai's defensive armament. It doubles as the unit's forward section in waverider mode. 
  • Fin Funnels: The Delta Kai mounts two Proto Fin Funnels on its back.

RM104.00
RM104.00 Add to cart
img
SAVERM74.90

MG 1/100 RGM-96X Jesta

  • Master Grade kit of the Londo Bell Corps' high-performance MS: the Jesta! 
  • Deployed by the elite Londo Bell Corps, The Jesta is replicated here with gimmicks such as its moving shield arm. In addition, this kit incorporate proportions and features once thought to be unique to top-level kits, now made standard for the Master Grade series.
  • Movable shield arm can hold the shield against the backpack or in a usable position! 
  • Grenades mounted at the waist, and specialized Beam Rifle and Beam Saber are included 
  • Emotion manipulators adopted from the higher-level v Gundam Ver.Ka, along with the weapon-locking system!
  • With a limited operating time in Destroy Mode, the Unicorn Gundam relies on the elite RGM-96X Jesta to take out it's non-Newtype enemies! 
  • Accessories: Beam Rifle, Shield, Beam Saber, Pilot Figure (Standing, Sitting), Joint for Action Base 1

RM165.00
RM165.00 Add to cart
img
SAVERM153.90

MG 1/100 MSN-06S Sinanju

  • Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  • The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
  • Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
  • The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
  • With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".

RM295.00
RM295.00 Add to cart
img
SAVERM21.90

[380] SDBB Unicorn Gundam 02 Banshee

  • Accessories: Armed Armor BS, Armed armor VN, beam saber

RM50.00
img
SAVERM21.90

[158] HGUC 1/144 Base Jabber Type 89

  • Accessories: one corresponding joint action based

RM50.00
img
SAVERM32.90

[161] HGUC 1/144 MSM-08 Zogok

- HGUC model kit of the updated One Year War era amphibious Zogok MS!
- Updated from a classic One Year War era design, Mobile Suit Gundam UC's Zogok has been recreated as a detailed High Grade kit. Recreate Gundam UC episode 4's impressive battle scene using the variety of weapons and gimmicks equipped on this suit!
- Mono Eye camera is mounted on a movable ball joint. Screen reproduced in clear plastic.
- Blade part of the Heat Saber can be represented with grey or clear elements.
- Recreate the signature “Rocket Punch” attack using parts replacement techniques.
- All 10 Boomerang Cutters are removable from head.
- Two Sturm Faust rockets mount at the waist.
- Richly detailed backpack and vernier thrusters.
- Built during the One Year War for the assault on Jaburo base, the amphibious MSM-08 Zogok was built for close-quarters combat, and is armed with a variety of weapons, including the unique Boomerang Cutter.

- Accessories: Heat Saber (Clear Blade, Grey Blade), Sturm Faust x2, Boomerang Cutter x10, Rod Arm x2, Fist (Left, Right), Grip Manipulator (Left, Right)

RM68.00
img
SAVERM39.90

[175] HGUC 1/144 Unicorn Gundam 02 Banshee Norn (Destroy Mode)

  • The RX-0[N] Unicorn Gundam 02 Banshee Norn (aka Banshee Norn) is an upgraded variant of the RX-0 Unicorn Gundam 02 Banshee that appears in the OVA version of Mobile Suit Gundam Unicorn. The unit is piloted by Riddhe Marcenas.
  • Accessories: Beam Magnum (with revolving launcher), beam Jytte, Armed Armor XC (expanded state), Armed armor DE (unfolded state), ( -  ?? no blade) x? 4, rifle handle, grip hand x? 2 (left and right) beam saber.

RM80.00
img
SAVERM26.90

[164] MSA-003 Nemo (Unicorn Desert Color Ver.)

The Nemo in desert colors as seen in episode 4 of "Gundam UC" comes with beam rifle, 2 beam sabers, shield, GM rifle and multiple hands for holding weapons and expressive gestures.

Accessories: 
- beam rifle
- beam saber × 2, shield
- Jim rifle

RM62.00
img
SAVERM251.90

MG 1/100 Unicorn Gundam 03 Phenex

  • The RX-0 Unicorn Gundam 03 Phenex is a mobile suit that appeared in Mobile Suit Gundam UC: One of Seventy Two, a short animation feature at Gundam Front Tokyo's "DOME-G" on August 3, 2013. It is based off a short story written by Gundam Unicorn's author, Fukui Harutoshi. To celebrate this short animated feature, Bandai Hobby produced a limited Gundam Front Tokyo HG model kit of this design.

RM468.00
RM468.00 Add to cart
img
SAVERM43.90

[170] HGUC 1/144 Silver Bullet

  • Mobile Suit Gundam Unicorn’s Doven Wolf-inspired Silver Bullet joins the HGUC lineup! 
  • Appearing in Mobile Suit Gundam Unicorn Bande Dessinee, the Silver Bullet is adapted from the powerful Doven Wolf. A more powerful Suit than its predecessor, the Silver Bullet features a variety of gimmicks to add to the build experience of this kit. 
  • Faceplate can be changed out to feature either the GM-style or Gundam-style head! 
  • Backpack is equipped with Beam Cannon deployment gimmick 
  • Large missile can be mounted on the Suit.
  • Missile launcher hatch can be closed or opened.
  • Suit equipped with INCOM storage gimmick.
  • INCOM Wire effects and Stand included for dynamic action poses! 
  • Shield features telescoping gimmick.
  • Accessories: Rifle, Shield, Large Anti-Ship Missile x2, Beam Saber x2, INCOM x2,
  • INCOM Stand x2, Manipulator x5, Faceplate x2 (Gundam Style, GM Style)

RM88.00
img
SAVERM22.90

[391] SDBB Unicorn Gundam 02 Banshee Norn

  • Protagonist Mobile Suit from Mobile Suit Gundam Unicorn Episode 7 is reimagined for the BB
  • Senshi line!
  • Choose between Gundam Visor or BB Senshi Pupils! 
  • Psycho Frame extends into arms and legs, and the elbow joint has been recreated to enable movement! 
  • Armed Armor XC and DE reproduced with completely new design! Armed Armor DE attaches to upper arm for use, and both are equipped with Psycho Frame deployment gimmick!
  • Accessories: Beam Magnum, Beam Saber, Revolving Launcher, Armed
  • Armor XC, Armed armor DE
Item Size/Weight : 31 x 20 x 5.7 cm / 259g

RM49.00
img
SAVERM419.20

PG 1/60 RX-0 Unicorn Gundam (Without LED)

  • The transformation from Unicorn Mode to Destroy Mode including the opening of the face guard can be perfectly recreated. 
  • The entire red Psycho Frame is made with a unique light-focusing resin. 
  • A magnet is inserted in the Blade Antenna, which can be opened and closed during the transformation, in order to keep the antenna beautifully in Unicorn Mode. The interior of the antenna, which is exposed in Destroy Mode, is gold. 
  • The range of movement of the elbows and knees is broadened to the utmost limit, without damaging its appearance. 
  • Includes a lot of weapons such as a Beam Magnum, a Hyper Bazooka and Beam Gatling Guns. 
  • The Beam Gatling Guns can be combined with the Shield and worn on its leg. 
  • A display stand is included to allow a wide range of weaponry to be displayed together with the Mobile Suit. Set the MS on the pillar of the stand and enjoy its dynamic poses which are special and unique to 1/60 scale. 
  • Figures of Banagher Links, standing and sitting, are included. 
  • Original marking stickers for the kit are included. 
  • Psycho Frame emits UV lights by incorporating the LED Unit for PG 1/60 RX-0 Unicorn Gundam, sold separately. 
  • Runner 47, Slide mark x1, Foil sticker x1, Instruction manual x1 

RM780.00
RM780.00 Add to cart
img
SAVERM855.20

PG 1/60 RX-0 Unicorn Gundam (With LED)

  • Latest news : Shipment has arrived.
  • This is completed set of PG Unicorn Gundam + LED Set at super saver price!
  • PG Unicorn Set:
  • Fully transformable (Face guard "expansion" included)
  • "Third form" realized
  • Red psychoframe in special glow plastic
  • "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  • Articulation of the elbow and knee joints able to perform a wide range of movements
  • Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  • Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun x— 2, saber x— 4 (beam parts x— 2), hyper-Basuka, dedicated display base, 
  • LED Unit:
  • A set of LED units to be UV emitting [PG 1/60 RX-0 Unicorn Gundam]
  • For use with Psychoframe with 29 LED units, and one for the eyes, making the total 30 LED units
  • Height Approx: 361mm
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM1180.00
RM1180.00 Add to cart
img
SAVERM479.12

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn

  • The head has transformation structure. The antennas on the head have magnet inside to hold them together in Unicorn Mode. 
  • In the state of "unchained", armor all over the body opens and maximally reveals the Psycho Frames. Psycho Frames are made with clear material. 
  • The lion's mane like Armed Armor XC is recreated with gold-color molding. The Psycho Frames are also made with clear material. 
  • The same range of movement as Unicorn Mode is maintained even in Destroy Mode. The kneeling pose can be recreated. 
  • The Revolving Launcher can be attached to the lower barrel of the Beam Magnum. The Beam Jutte, is recreated with clear parts. 
  • The Armed Armor DE and Beam Sabers are included. The Armed Armor DE has unfolding gimmicks and can be mounted on the back. 
  • The spare magazines of the Beam Magnum and Revolving Launcher can be attached to the hip. 
  • Weapons can also be displayed with included display base. The base has an elastic support post to enable the MS to make dynamic poses. 
  • Riddhe Marcenas figures (standing and seated) are included. 
  • Includes original marking stickers. 
  • Runner x58, Tetron sticker x1, Foil sticker x1, Instruction manual x1

RM840.00
RM840.00 Add to cart
img
SAVERM758.64

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn (With LED)

LED is included in this unit.

- [Kuroki lion] final battle form of Banshi~i - Banshi~i-Norns appeared !! to PG


- [Mobile Suit Gundam UC] than Banshi~i-Norns appeared become a Gundam highest grade PG. Fully reproduce the transformation from Unicorn mode to Destroy mode. Various equipment comes as the final decisive battle form.

- Armed Armor DE as a new accessory armed, comes with parts to reproduce the revolving launcher (. Existing beam Magnum, new parts added to shield both form reproducible).
- Psycho frame that is exposed to Destroy mode UV emission resin made of clear plastic reproduced in (clear yellow) specification.
- Anime by removing the Armed armor XC version Banshi~i also reproducible.

- Accessories: Beam Magnum (revolving launcher), shield (Armed armor DE), Armed armor XC, beam Jytte effect, beam saber × 2, beam Magnum spare magazine, pilot figures (Standing-sitting)

RM1280.00
RM1280.00 Add to cart
img
SAVERM10.98

SD Ex-Standard Unicorn Gundam Destroy Mode

  • Part of the new SD Gundam EX-Standard product line the Unicorn Gundam in Destroy Mode has been recreated with an emphasis on articulation and enhanced proportion. 
  • Weapons include beam rifle and shield. 
  • Runner x4, sticker, instruction manual. 
  • The parts swaps and cross-compatibility introduced in SDBF carry over to EX-STANDARD, allowing for a wide range of customization options.

RM25.00
img
SAVERM75.60

[022] RG 1/144 Sinanju

- Leaders of the [with sleeves], of crimson that Full Frontal to boarding MS` Sinanju `finally appeared at RG!

- RG POINT1: flexible thruster
Production enhancement of flexible thruster designed arranged by the actual historical research. Evolution to a more Gimikaru structure. Open and close while the medium mechanical exposed.

- RG POINT2: texture representation
Reproduce the whole body to arranged a gold patterned portions `engraved` in the plating and parts division. The underlying red molded color gloss injection specification. Beautiful glow of just Sinanju assemble enters the hand.

- RG POINT3: thrusters armor slide gimmick equipped
Thrusters of whole body equipped with a gimmick that the armor part to slide. Produce a mechanical sense of mechanical visible production.

- RG POINT4: high density detailing
Reflected in the whole body mechanical the Hajime Katoki dense detail design by draw down Mr..

- Reproduction of the armed
Equipment of Sinanju is included. Shield also adopted the engraving process. Back also detail reproduction.

- Accessories: beam rifle, beam saber, beam ax, shield, beam effect parts x— 3 types, weapons possession (left and right), palm (left)

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size : 31 x 20 x 11 cm

RM152.00
RM152.00 Add to cart
img
SAVERM0.00

[Daban] PG 1/60 RX-0 Unicorn Gundam (Final Battle Ver.)

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60
Model: Final Battle Version 

Included components

* Special : Metallic Green Psycho Frame & Clear Green Psycho Frame (1each)

* Main Body x1

* Shield x3 (Final Battle)

* Beam Magnum x1

* Beam Magnum backup cartridge x1

* Beam gatling gun x2

* Beam saber x4

* Beam bazooka x1

* Display base

* Detron stickers for all markings


Please note  that this is Not-Bandai product

RM450.00
RM450.00 Add to cart
img
SAVERM10.00

[Daban] PG 1/60 Unicorn Fighter 03 Phenex Gundam

[Daban] PG 1/60 Phenex Gundam Unicorn

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM450.00
RM450.00 Add to cart
img
SAVERM209.00

MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]

MEGA SIZE 1/48 RX-0 Unicorn Gundam [Destroy Mode]


- The biggest model in the series with the largest appearance!
- Overall height about 452 mm !! Mega size model maximum size! Feel the giant feeling of the real thing with the plamo according to the topic of standing up!

- POINT 1: Mega Size Series Maximum Size!
Mega size unicorn Gundam boasts overwhelming size. The total height is about 452 mm and the biggest size in the mega size series history.

- POINT 2: adopt shading mold
Part of the shoulder armor and other parts of the body Adopted a shading mold at key points. It emphasizes the shadow by sculpting the mold deeper than in the past, just to assemble it into a three-dimensional sense just like in the play.

- Attached weapons
Beam magnum and shield of the same scale are included. Beam · saber blade effect is attached to both arms to reproduce beam · tofer.

- Accessories: Beam · Magnum x 1, Shield x 1, Beam · Saber x 2

RM390.00
RM390.00 Add to cart
img
SAVERM75.60

[025] RG 1/144 RX-0 Unicorn Gundam

RG 1/144 RX-0 Unicorn Gundam


- GUNPLA EVOLUTION PROJECT 2nd volume !!
- Unicorn Gundam is awake now, with a form pursuing reality and transformation gimmicks reproduced at 1/144!
- Unicorn Gundam is made into RG with a mechanism based on original setting consideration and real detail. [Transform] is realized for the first time on 1/144 scale by [Advanced MS Framework].

[EVOLUTION POINT `TRANSFORMATION (transformation)`]
- Create a product that will become Gundam's next-generation standard [GUNPLA EVOLUTION PROJECT]. EVOLUTION POINT in the second project [RG 1/144 Unicorn Gundam] is `TRANSFORMATION`. Realized transformation beyond the limit within the constraints of 1/144 scale.

[ADVANCED MS FRAMEWORK]
- A new framework developed to embody the Unicorn Gundam as RG. By "Advanced MS Framework" equipped with three gimmicks, [Advanced MS Joint], [Lock Mechanism], [Link Mechanism], we realize high stability after assembly and compatibility of movement of each part.

- 01: New frame pursuing a transformation mechanism [Advanced MS joint]
I thoroughly examined the transformation to the destroy mode, and created a new frame. It is the new design pursuing the transformation mechanism, [Advance MS joint] which is responsible for its center.

- 02: Precise locking mechanism to lock parts when transforming [lock mechanism]
Besides the armored part of the external forearm, locking mechanism for fixing parts after transformation is installed in various places. Realize high stability after transformation.

- 03: RG original proprietary [link mechanism] to reproduce a smooth transformation
The characteristic leg leg transformation of Unicorn Gundam is reproduced with a new [link mechanism]. This mechanism enables smooth transformation while alleviating the assembly process.

- Precise reproduction of weapon deployment. In addition to deployment of the psycho-frame of the shield, the cartridge detaching mechanism of beam ? magnum is reproduced.

- Accessories: Beam ? Magnum x 1, Beam ? Saber x 2, Hyper ? Bazooka x 1, Shield x 1

RM152.00
RM152.00 Add to cart
img
SAVERM79.60

[027] RG Unicorn Gundam 02 Banshee Norn

[027] RG Unicorn Gundam 02 Banshee Norn

Accessories: 
Beam Magnum ? 1, 
Revolving Launcher ? 1, 
Armed Armor DE ? 1, 
Armed Armor XC ? 1, 
Beam Saber x 2

RM160.00
RM160.00 Add to cart
img
SAVERM19.90

[12] SDCS Gundam Cross Silhouette Unicorn Gundam (Destroy Mode)

A unicorn Gundam focused on [Density, Easy to Assemble, Moveable] appeared from SDCS!

-Characteristic psycho frame-reproduced in clear parts. High-satisfaction molding that condensed the charm of Unicorn Gundam!
-By rearranging, you can select the presence or absence of the pupil.
-Beam magnum, beam saber, shield included.
-By linking with the CS frame (sold separately), it is possible to reproduce high headed body and high movable form. You can enjoy it with your favorite proportions!

[accessories]
? Beam Magnum x1
? Beam saber x2
? Shield x1

[Item content]
-   Molded articles x 5
? Foil seal x1
? Instruction manual x1

RM40.00
img
SAVERM79.20

P-Bandai: HGUC 1/144 Gundam TR-1 Hazenthley Rah II

Premium Bandai continues the Advance of Z series with the Gundam TR-1 in its Haze'n Thley Rah II form! This kit shares the same molds with the HGUC 1/144 Advanced Hazel extended with variety of AOZ mobile suit equipment, starting from Owsla style armor chest piece, to its HRUDUDU II side armor expansion parts.
This kit also comes with a "Psycho Blade" system which is entirely new mold for the AOZ series model kits.
The kit is also completed with its weapons! From its Composite Shield Booster, Beam Rifle, to its Beam Saber.

RM400.00
RM400.00 Add to cart

Showing 1 - 30 of 161 products