Price Clear







Star wars Model Kits

Showing 61 - 90 of 107 products

img
SAVERM57.50

[Star Wars] 1/72 Resistence X-Wing Fighter

  • X-Wing Fighter Resistance specification 1/72 scale that appeared during the "awakening of Star Wars / Force" drama.
  • Possible desorption of BB-8 to support adjustment and pilot of the aircraft.
  • Airframe side of the line is to reproduce the color-coded in the molding color, other fine line using the water transfer type decals and marking seal.
  • Canopy and those of the all-clear material, two is supplied only frame.
  • to reproduce the detail over the details by verifying the thorough article condensation in the 1/72 scale.
  • Distinctive wings reproduce the opening and closing of the same in the play.
  • Chakuyukaashi comes the landing gear to reproduce the implantation and maintenance state.
  • Laser cannon can reproduce the figure decided to attack by inserting the laser effect to the wing tip.
  • Display base desert motif of Jakhu of aircraft. Based multiple connection possible with the joint parts.
  • The same scale of the pilot (seated type upright type) and BB-8 is included.
  • [Accessories] dedicated display case x 1, pilot figures x 2 (seated x 1, upright x 1), BB-8 x 1, x 2 canopy species (Clear parts x 1, frame parts x 1), effect parts x 2 , Chakuyukaashi x set
  • [Commodity content] moldings x 4, water transfer type decal x 1, marking seal x 1, assembly instructions x 1

RM98.40
img
SAVERM40.90

[Star Wars] 1/12 Stormtrooper

Bandai's "Star Wars" lineup expands with the 1/12-scale Storm Trooper model kit! This standard-issue bucket head will come with multiple interchangeable hands, several weapons and a removable holster, as well as a display base. Fully posable after assembly, he'll be ready to whack his head into overhead doors, get beaten up by Ewoks, or escort Death Star prisoners to their doom as you choose! 

Buy several and build a whole platoon!

Bonus:
-E-11 blaster
-DLT-19 heavy blaster rifle
-Close combat pistol
-Display base x2
-Hand parts x6 types (weapon holding hand x2, flat hands x2, right fist, left point hand part)

RM96.00
img
SAVERM45.90

[Star Wars] 1/12 Darth Vader

Bandai makes a big splash in the 'Star Wars' world with its 1/12-scale Darth Vader model kit!  This version of the Dark Lord of the Sith depicts him as seen in 'The Empire Strikes Back,' and includes interchangeable hands, a removable helmet, a light saber hilt and a ready-for-battle light saber.  His cape is also jointed for dramatic poses! A base is included as well.  Come over to the Dark Side and place your order today!


  • Release Date: Nov 2014
  • In the battle of episode 5 of the Cloud City], and reproduced in 1/12 scale model Darth Vader was confronted by overwhelming force.
  • This is first Star Wars character plastic model kits!
  • Helmet: head cover removable helmet.
  • Water decal in use too.
  • Set include Two light saber x (handle state-light blade unfolded state), Dedicated display base x 1, (Weapon possession x 2, left fist x 1, smack x 2) 5 kinds of hand parts x 1
  • Height: approx 169mm.

  • This is pre-painted plastic model kits and require snap-fit assembly only.

    RM98.00
    img
    SAVERM45.50

    [Star Wars] 1/72 TIE Advanced x1

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Here is Darth Vader's TIE Fighter, now in snap-fit Bandai quality plamo goodness!  This amazing kit includes two Darth Vader figures--a seated one to pilot the vehicle, and a standing one for display alongside it.  Two types of removable display windows are included for the cockpit, and a Death Star panel display base will show this wicked machine off in style!  Laser effects are also included. Don't miss out on this iconic fighter!  

    Release Date: Nov 2014

    To detail reproduced in 1:72 scale Thai Advanced x1 Darth Vader was boarding in [episode 4].

    Set include : Death Star surface base × 1, Laser effects × 2, Darth Vader figure × 2 (seated upright × 1 · × 1), (Clear parts × 1 · frame parts × 1) 2 kinds of view boat ×

    Full length: approx 85mm.

    This is pre-painted plastic model kits and require snap-fit assembly only..

    RM98.40
    img
    SAVERM45.50

    [Star Wars] 1/48 AT-ST

    This item is an injection-plastic kit of a science-fiction/anime item.  

    The AT-ST -- or the All Terrain Scout Transport -- is joining Bandai's lineup of exciting Star Wars kits! Add a little more mechanical flair to your Star Wars collection with the Empire's "chicken walker." You might want to keep this one away from the Ewoks.

    This snapfit kit consists of parts molded in grey and brown plastic, and includes a Wookiee figurine, pilot figurine, red effects parts, and display terrain base. Also included are markings as both stickers and water-slide decals.

    RM98.40
    img
    SAVERM45.50

    [Star Wars] 1/72 Tie Fighter

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Able to operate both in space and in planetary atmosphere, the TIE fighter was the Empire's most easily recognizable spacecraft. This snapfit kit consists of parts molded in grey, black, and clear plastic, and includes two pilot figurines, green effects parts, and a flexible display base. Also included are markings as both stickers and water-slide decals. 

    RM98.40
    img
    SAVERM43.10

    [Star Wars] 1/12 R2-D2 & R5-D4

    This item is an injection-plastic kit of a science-fiction/anime item.  

    Sassy sidekick R2-D2 and the Lars Homestead's own R5-D4 are joining Bandai's exciting lineup of model kits! This set includes both of the Skywalker droids in 1/12 scale, and an assortment of accessories.
    Please note that the photos shown are of the prototype version and may change before release.

    RM100.80
    img
    SAVERM62.86

    [Star Wars] 1/12 C-3PO

    • The three-dimensional at 1/12 scale the typical protocol droid of Star Wars [C-3PO].
    • Re-examine the wide range of materials in order to reproduce the fine detail, condensed in the 1/12 scale.
    • Abdomen of cable will also use some soft material, reproduction.
    • The base comes with those of the image of the floor of the internal Death Star. Also possible to be linked with other products of the pedestal of sale.
    • Hand parts are included
    • [C-3PO] characteristic reproduce gold of the body at the commitment plating specifications. Right foot is reproduced in silver-plated.
    Accessories: face parts x 2 types (normal type, damage type), damage eye parts, commlink x 2, control bolt x 2, control bolt mounting body parts, smack (left and right), commlink holding Possession ( left and right), plated arm parts for display (left and right), a dedicated display base

    RM147.00
    img
    SAVERM45.50

    [Star Wars] 1/48 Snowspeeder

    • At the Star Wars [Strikes Back Episode 5 / empire], three-dimensional in 1/48 scale Snowspeeder hero Luke Skywalker was boarding!
    • Condensed the details of detail in the 1/48 scale from the verification of thorough Prop (imaging model).
    • The replacement of parts, to reproduce the opening and closing state of air brake.
    • Snow Speeder can be reproduced to fire a laser gun with a laser effect.
    • Seating type figure of the same scale is two bodies included. Snowfield in the AT-AT a defeated power Harpoon (harpoon) parts of the host is also included.
    • Supplied base image the snowy field host. Based multiple connection is possible with the joint parts.

    Accessories: Dedicated display base, laser effect parts x 2,1 / 48 figure x 2 species (pilot, gunner), canopy x 2 species (frame & clear parts, clear parts), Power Harpoon (harpoon) parts, air brake opening and closing reproduction parts four x 2

    RM98.40
    img
    SAVERM104.70

    [Star Wars] 1/12 Scout Trooper & Speeder Bike

    [Star Wars] 1/12 Scout Trooper & Speeder Bike

    • Accessories: scout trooper, speeder bike, dedicated display base × 2 (Endor image, Death Star image), scout trooper blaster, hand parts × 5 species (grip grip left and right × 2 / smack × 2 / weapon possession), rear parts × 2 of Repulsor drive (open / closed)

    RM184.30
    img
    SAVERM59.89

    [Star Wars] 1/12 Sand Trooper

    [Star Wars] 1/12 Sand Trooper

    • Accessories: only display base, backpack, shoulder pads, small pack x? 3, T-21 fire formula light blaster, E-11 blaster rifle, DLT-19 heavy blaster rifle, SE-14r short-range combat pistol, weapon possession x? 2, smack x? 2, left pointing hand, right hand grip

    RM102.00
    img
    SAVERM75.85

    [Star Wars] 1/144 Slave I

    [Star Wars] 1/144 Slave I

    • Accessories: (road part of the selection formula) dedicated display-based, laser effect parts ? 2, Boba Fett figure ? 2 (upright-seated), carbonite frozen Han Solo figure, hangar hatch opening and closing reproduction parts two ? 2, apron / flight state reproduction for both wings cylinder parts two ? 2

    RM152.00
    img
    SAVERM215.61

    [Star Wars] 1/48 X-Wing Starfighter (Moving Edition)

    • This product is only sold in Japan currently.
    • Not many units available ~ hurry while stock lasts.
    • 3xAA battery required and sold separately.
    • [STAR WARS] 1/48 X-WING STARFIGHTER MOVING EDITION

    RM372.00
    img
    SAVERM45.90

    [Star Wars] 1/12 First Order Stormtrooper

    Bandai are continuing their 1/12th figure range with the new First Order storm trooper. The snap together kit can be built up unpainted but we think the traditional glue and paint method will make this into a cool looking model - Don't know too much about the First order?


    In the years that followed the battle of Endor and the fall of the Galactic Empire, the break-off movement called the "First Order" emerged, inspired by the principals of the fallen government and led by former officers of the Empire.

    The First Order was active approximately thirty years after the Battle of Endor, and fought against the Resistance. Just like the Empire - the First Order employed the use of stormtroopers, including variants such as flametroopers and snowtroopers.

    The new model storm trooper featured in "The Force Awakens" has a slightly slipstreamed body armour look. And this model can be posed in most positions for you to use wherever you want. 

    The new Bandai kit in 1/12th scale comes with a bunch of optional parts, a small display base that can be joined to another trooper to make your own army in perfect ranks!

    Accessories that come with this kit :
    - Exclusive display base x 1
    - Blaster x 1
    - Tonfa shield x1
    - Water transfer type decal x 1
    - Stickers x 1

    The six different hand parts left fist and right fist weapon holding both hands & two pointing hands left and right.

    RM98.00
    img
    SAVERM45.90

    [Star Wars] 1/12 R2-D2 & BB-8

    [Star Wars] 1/12 R2-D2 & BB-8
    [Accessory] 

    • Dedicated display base × 2 
    • BB-8 dedicated stand × 1 
    • R2-D2 Various arm parts × 7 types 
    • BB-8 various arm parts × 3 types 
    • BB-8 & R2-D2 storage box opening / closing re-use working parts × 1 type 
    • water transfer type decal × 1 
    • marking seal × 1

    RM98.00
    img
    SAVERM45.40

    [Star Wars] 1/72 First Order Special Forces Tie Fighter

    From "Star Wars: the force Awakens", the first order special forces tie fighter is making its way to the band a I Star Wars plastic BAN203219 lineup!
    Utilizing CG prop modeling, every small detail in this 1/72 scale BAN203219 are reproduced accurately to scale.
    Two view ports are included, one clear, and one utilizing the cockpit frame. Use the included laser effect parts with moveable turrets and the display base resembling the Jake desert to recreate your favorite scenes! set includes dedicated display base, laser effect parts, two viewports (clear and frame), and two 1/72 pilots (seated). water-transfer decal x1. Marking sticker x1. Instruction manual x1.

    RM98.40
    img
    SAVERM79.60

    [Star Wars] 1/12 Captain Phasma

    [Star Wars] 1/12 Captain Phasma 

    [Accessory] 
    Dedicated display base x 1 
    Fuzzma exclusive blaster x 1 
    Hand parts x 6 types (weapon possession x 2 · flat hands x 2 · fists x 2) 
    cloak x 2 species (molded cloak x 1 · cloth cloak x 1) 
    Line seal for cloak x 1 
    water transfer type decal x 1 
    marking seal x 1

    RM160.00
    img
    SAVERM64.70

    [Star Wars] 1/12 Kylo Ren

    [Star Wars] KYLO REN 1/12 scale

    [Accessories] 
    dedicated display base x 1 
    lightsaber x 2 kinds (patterns state, light blade deployed state) 
    the hand parts x 8 kinds (weapons possession x 2 -  ï¿½ Hirate x 4-fist x 2) 
    water transfer type decals x 1 
    marking seal x 1 
    Assembled instruction x 1

    RM115.00
    img
    SAVERM11.30

    [Star Wars] Vehicle Model Series 002 - X-Wing Starfighter

    • Height approx 86mm
    • In marking seal, reproduce the characteristic line of the X-wing starfighter.
    • That is characteristic wing of the X-wing starfighter is possible deployment.
    • Display base is included

    RM24.60
    img
    SAVERM45.40

    [Star Wars] 1/72 A-Wing Starfighter

    [Star Wars] 1/72 Modelkit A-Wing Starfighter

    [ INCLUDED ACCESSORIES ]
    • Dedicated display base x 1
    • Turbolaser x 1
    • Laser effect part x 2
    • 1/72 Pilot (seated) x 1
    • Landing gears x 1 set
    • Canopy x 2 types (frame & clear part x 1/clear part x 1)
    • Water-transfer decal x 1
    • Marking sticker x 1

    RM98.40
    img
    SAVERM47.80

    [Star Wars] 1/12 Clone Troopers

    Episode 2 / Clone Attack, Episode 3 / Revenge of Sith "Clone Trooper" reproduced on 1/12 scale. 


    Two kinds of head parts are attached, and it is possible to produce the style of your choice. 

    Detailed verification of the material reproduces in detail, condensed in the 1/12 scale. 

    Head Parts Two head parts are attached and it is possible to assemble the Phase I / II clone trooper. 
    Macro binuclear can also be installed selectively. 

    Weapon : 2 type weapon included. Reproduce the action pose by moving the joint movable joint. Hand Parts Scene can be reproduced by various hand parts. Display base dedicated to display is included. Multiple connections can be made with joint parts. 

    Accessories : 
    Display Base Head x 2 (Phase I ~ 1, Phase II ~ 1) 
    DC-15 Blaster DC-15 Rifle Macro biochemical (Phase II Selected Parts) ~ 1 Various Hand Parts ~ 6 
    Hand ~ 2
    Flat ~ 2
    Fists ~ 2

    RM96.00
    img
    SAVERM11.30

    [Star Wars] Vehicle Model Series 003 - Poe's X-Wing Fighter

    [Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

    • Length: 85mm
    • Marking stickers replicate Poe's X-Wing Starfighter's distinctive lines.
    • The X-Wing Starfighter's distinctive wings open and close.
    • Includes a display base.

    RM24.60
    img
    SAVERM46.40

    [3in1] Star Wars Vehicle Model Series - 001, 002 & 003

    • (3 in 1) Star Wars Vehicle Model 001,002 and 003 (Star Destroyer, X-wing,Poe X-wing)
    • Package inclues:
    • 1 x [Star Wars] Vehicle Model Series 001 Star Destroyer
    • 1 x [Star Wars] Vehicle Model Series 002 X-Wing Starfighter
    • 1 x [Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

    RM61.40
    img
    SAVERM45.80

    [Star Wars] 1/12 K-2SO

    [Star Wars] 1/12 K-2SO

    Accessory] 
    Display Base x 1 
    Display Stand x 1 
    Hand Part x 4 Types

    RM98.00
    img
    SAVERM62.70

    [Star Wars] 1/6 Yoda (1/12 scale Yoda Included)

    From the Star Wars: Episode V The Empire Strikes Back comes a 1/6 scale model kit of Yoda the wise!

    Yoda stands 4.3 inches when completed and includes 2 different head sculpts, his gimer staff, his green light saber, water transfer decals, display base, and interchangeable hands.

    This model kit also includes a 1/12 scale Yoda holding his grimer staff, standing about 2.2 inches when completed.

    Features:
    1/6 scale Yoda is 4.3 inches (11cm)
    1/12 scale Yoda is 2.2 inches (5.7cm)
    Made of plastic
    From The Empire Strikes Back
    Featuring Yoda as a model kit
    Includes 6 molded parts, 2 interchangeable heads, 1/6 and 1/12 scale staffs, lightsaber parts, 5 interchangeable hands, 2 display bases, water transfer decal, instructions

    Contents:
    1/6 scale Yoda parts
    1/12 scale Yoda parts
    2 interchangeable heads
    With hair
    Without hair
    5 interchangeable hands
    2 staff parts
    1/6 scale staff
    1/12 scale staff
    2 lightsabers
    Sheathed
    Unsheathed
    Water transfer decal
    2 display bases
    1/6 scale
    1/12 scale
    Instructions

    RM117.00
    img
    SAVERM144.40

    [Star Wars] 1/6 Stormtrooper

    Bandai has created an excellent kit at 1/6 scale this one knocks it out of the park. Their 1/12 scale figures are great, but at this scale everything is much improved for detail and display! I hope this is the first of many more 1/6 scale figures to come. I found this kit to be excellently made. Goes together well. Has options for weapons and parts for posing. Nothing like this as ever been released for modelers before in kit form. Quality product!

    RM245.00
    img
    SAVERM358.60

    [Star Wars] 1/2 BB-8

    "BB - 8" which became popular in "Star Wars / Awakening of Force" appeared becoming a large model model of about 33.5 cm! Because it is this size realistic gimmick reproduction and abundant attached parts. With high-quality BB-8 in hand!


     * NEW TECHNOLOGY 
    First adopted the new technology "shading mold" that clearly shows detail line (line). By emphasizing the shadow of the detail line it is a large model but it has a sense of density. 

    * GIMMICK 
    Scenes that remove the R2-D2 sheet that was impressive in the play, the discharge scene, the scene that thumbs up with the burner can be reproduced with various parts. In the play, "Map Chip Parts" came from "Po Dammeron" is included. The "storage pocket" where the chip fits is also reproducible. 

    * LIGHTING 
    Primary photoreceptor of the head can be reproduced on the LED (red) unit. Batteries used: LR 41 x 2 (sold separately) 

    [Accessories] 
    Dedicated display base x 1, Arm x 2 (Zapper arm parts, burner arm parts), utility arm parts x 1, map chip parts x 1, effect parts x 2 (fire reproduction parts, discharge reproduction parts) 

    [Product Details] 
    Molded item x 22, LED unit (red) x 1, marking seal x 1, instruction manual x 1

    RM480.00
    img
    SAVERM83.60

    [Star Wars] 1/12 Battle Droid & Stap

    Commercialization of the trade union's "Battle Droid" that appeared in "Star Wars Episode 1 / Phantom Menace", "Star Wars Episode 2 / Attack of the Clone" and its Vehicle "Stap" set! 


    Thorough material verification realized modeling sticking! 

    The state before the start of the battle droid can also be reproduced. Characteristic weapons of battle droids are included. It is also possible to install a blaster in a backpack with a hook style. Battle droid backpack is removable. Macro binuclar is also included. The head parts with the conventional item C - 3PO can be exchanged, and an impressive scene in the play can be reproduced. Two types of black pedestal for battle droid and clear pedestal for stap are attached. 

    Accessories : 
    Display Base ~ 2 (Base for Battle Droid ~ 1, Clear Base for Stap ~ 1) 
    E-5 Blaster ~ 1 
    Macro Binocular ~ 1 
    Replacement Antenna ~ 1 
    Head Replacement Part x 2

    RM168.00
    img
    SAVERM11.30

    [Star Wars] Vehicle Model Series 010 - A-Wing Starfighter

    [Star Wars] Vehicle Model Series 010 - A-Wing Starfighter


    2 units in the package

    RM24.60
    img
    SAVERM89.60

    [Star Wars] 1/12 General Grievous

    Dreams do come true, my friends. Bandai just announced General Grievous for their Star Wars model kit line. And I couldn -  ??t be happier.


    And there are several reasons for my happiness, besides getting to add a new Star Wars figure to my 1/12 scale display.

    One, the model kit figure line is continuing. It -  ??s been a while since a new figure, as in an all-new kit, has been announced. I was afraid the Battle Droid reissue and the hologram Darth Vader was signaling the demise of one of my favorite lines.

    Two, it -  ??s Grievous. In the model kit line. Sure, we -  ??ve seen teases in the S.H. Figuarts line but I was hoping for a model because they are bigger. That -  ??s it. Sure, the detailing will have to be painted and it may feel just slightly more flimsy than an actual action figure, but the good General will end up more imposing on the shelf after being put together. Don -  ??t get me wrong, I -  ??m still hoping for an SHF, but I -  ??m downright giddy at the thought of building Grievous.

    RM180.00

    Showing 61 - 90 of 107 products