• Accessories: MS for the machine gun, MS for a machine gun spare magazine, MS for anti-ship rifle ASR-78, the heat Hawk, heat Hawk (storage state), MS for bazooka type A2, MS for bazooka spare magazine × 2, bazooka joint, open hand (left), gun possession (right), weapons possession (left and right)
  

• Total 307 parts, plus polycaps for joints, foil stickers for coloured parts, clear stickers for warnings, and the usual dry transfers for insignia and other markings, are included in the box. 
  
• Lots of weapons come along with it, double-bladed beam sabre, beam rifle, and shield, etc. Included in that parts count is a display stand, to allow you to pose your Freedom Gundam in flight. 
  
• A beautiful kit of a beautiful machine! 
  
• The markings allow you to designate your Freedom Gundam as a Zaft machine, or as Kira's personal machine.
  

• Bandai's High Grade Universal Century kit line continues to get better and better and nowhere is this in evidence more than on the latest kit, the 00 Gundam Seven Sword/G. 
  
• Molded in color with clear parts and marking stickers. As always, plenty of poly-caps are used to ensure a great amount of articulation. 
  
• Weapons include GN Sword II Blaster, GN Buster Sword II (assembles in shield and sword mode), GN Katar, GN Sword II Long (assembles in rifle and sword mode), GN Sword II Short, and GN Beam Saber. Weight: 330g
  

Weapons include GN beam rifle, GN beam sabers, shield, prototype GN sword, and GN launcher. Includes new features such as shoulder joints that can extend outward, allowing dramatic poses as seen in the animated series. Waist features axial cover parts for recreating off-center poses. Weight:524g

Accessories includes beam rifle and comes with a pistol shape and 2 sets bits. At least ten GN Rifle Bit IIs are stored within the GN Holster Bits, mounted on Zabanya's rear thruster block. Weapons-wise, GN Micro-Missiles are laced throughout its armor and the GN Holster Bits contain GN Rifle Bits within them. Expected to arrive on middle September, 2010

- [Mobile Suit Gundam SEED DESTINY] commercialized in 1/100 scale [Akatsuki] who was active in the series.
- Elbow joint adopts the double joint mechanism, expand the movable range.
- Adopted a refraction mechanism in a backpack, pursuing the folded state, the sportiness of the expanded state.
- Steller's sea eagle, Shiranui, comes with two types of backpack.
- Beam saber, beam rifle, shield, grip hand x 2 (both hands) is included.
- Hoishiru, marking seal (Akatsuki, Shiranui, eagle, aircraft number) is included.

• Prior to release of the second story, three-dimensional deformation of the fastest MS · Delta Plus! 
  
• Replacement variant forms of reproduction wave rider. 
  
• Machines do not feel that variable proportions of outstanding! 
  
• Part adopt clear head! 
  
• MS outstanding performance is in the form of posing! 
  
• Minimizes replacement parts, can transform smoothly. 
  
• Can be mounted in the form of armed wave rider. 
  
• Accessories: beam saber × 2, beam rifle, shield, replacement parts for the deformation
  

• This full burst mode special version box comes packed with the same MG kit as the normal version of MG Strike Freedom Gundam. 
  
• And this special box include gold coating parts, Dragoon effect parts, a special clear blue base stand, and a clear illustration poster of Strike Freedom vs Destiny. 
  
• Clear stands for each Dragoon are included, which can be attached to the special base stand and display them being sent flying out to its target(s). 
  
• Stickers and custom decal markings are included to detail-up the completed Strike Freedom Gundam kit.Comes with the gold inner frame, unique stand base that able to shoot the beam canon of dragoon system, some hate the stand base, some love it, and notice the 'wing' inner also in gold color, which is pretty cool too. 
  
• One of the similarity feature of strike freedom gundam full burst mode is the combineable rifle on the waist with unique fingers to posture for gun carrying look, this mecha really stand tall and cool among the scale and worth to collect. 
  

Awesome height of 60cm. The only thing that makes this kit different from other 1/60 scale kit is the lighting throughout! Dozens of translucent yellow and blue parts are included, as well as lighting contacts, light bulbs, and a diode. Lighting starts at the included display base, and the wiring is integral to the building of the kit itself. Of course, you need to get batteries yourself. A teeny scale model of Kira Yamato is included. Weopans includes the Dragoon, rail guns, beam sabres, beam rifles, and a beam shield. Weight: 1820g

• Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  
• The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
• Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  
• Weight:696g.

• Gundam 00 Raiser condenser mode made its appearance! 
• Active character in the early 00 movies. 
• Accessories: 
• GN Sword II × 2, 
• GN Sword III, 
• shield, 
• pedestal

• Raiser + GN Sword III of the final battle specification is the product of a normal color!
  
• Effects are clear parts. GN Sword II also included of course.
  
• Sword mode rifle mode can be converted to GN Sword III.
  
• Effects blade part of GN Sword III also reproduced in clear plastic.
  
• Accessories: GN Sword III x 1, GN Sword II x 2, GN beam saber x 2, GN shield x 1
  

Not just a recolor of the 2008 1/100 GN-0000 + GNR-010 00 Raiser Special Set, this excellent release offers a third light-up LED for the Mobile Suit's head, a brand new weapon, and all parts come molded in the same light-toned color scheme as mecha designer Kanetake Ebikawa's concept illustration of 00 Raiser!

Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode! Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser!

A sheet of foil stickers and a sheet of designer's marking stickers are provided.

Three LED button light are included without batteries.

Out on Christmas season on end of Year 2008. Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! A sheet of foil stickers and a sheet of designer's marking stickers are provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode!

Inspired by Zhuge Liang from the Chinese literary classic "Romance of the Three Kingdoms," Koumei Re-GZ is offered as a nicely detailed snap-fit plastic kit! He comes with a scroll and is armed with his Bakuousen fan weapon that can transform into a Bakuouki mechanical bird.

Inspired by Taishi Ci from the Chinese literary classic "Romance of the Three Kingdoms," Taishiji Dom is now a nicely detailed snap-fit plastic kit! He wields a spiked iron rod, and comes with a support mecha that can be attached to his body to provide additional armor and claw hands; they can also combine together to form a flight unit. Weight: 150g

Inspired by Guan Ping from the Chinese literary classic "Romance of the Three Kingdoms," Kanpei Gundam is now offered as a nicely detailed snap-fit plastic kit! His weapons include a pair of Kieisou arm attachments and a Kiringa guandao that can be combined with the Ouga Ryuugetsutou weapon from Kan'u Gundam (sold separately) to form a double-bladed Souki Ryoujintou!

Inspired by Cao Cao from the original Chinese epic, Sousou Gundam is nicely detailed and comes armed with his Enkotsujin sword. Foil stickers are included so painting is not required, but would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them. Weight:140g

Copyright Sotsu Agency / Sunrize Item Size/Weight : 20.4 x 15 x 5.5 cm / 170g

• All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  
• A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.
  

• It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  
• Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  
• The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  
• Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  
• Katoki Hajime has designed the markings. 
  
• Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g
  

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. 

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam.