Price Clear







Showing BANDAI product(s)

Showing 31 - 60 of 3351 products

img
SAVERM714.90

PG 1/60 ZGMF-X20A Strike Freedom Gundam

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size among the PG. With it -  s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively shows the gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam

Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60

RM875.00
RM875.00 Add to cart
img
SAVERM93.90

Bandai ONE PIECE Going Merry Mainan Kit Model Kapar

  • Nobody can stop this momentum! From the super popular anime "One Piece", here is a plastic model kit of Going Merry Sailing Ship!
  • A great display model for the One Piece fans, as well as sail boat model kit fans too!!
  • By using different maretials for the ropes of each area, both gimmick and ease of assembling has been achieved! The ropes has been reproduced in its tied state, and even the shape of the knot has been pursued. Nylon string has been used for the rope of the anchor. The anchor can be reproduced at its released state and can also be attached to the ship body as well.
  • The creases of the mast and the Pirate Symbol have been reproduced! The mast has been made with translucent polystyrene plastic, and even the creases had been reproduced. The Pirate Symbol can be reproduced by either marking sticker or water transfer decal.
  • The Straw Hat Crew figures are included! The crew had been reproduced to match the scene. Included Nami, Chopper, Ussopp, Luffy, Sanji, and Zoro.
  • Even the orange trees have been reproduced!
  • Filled with little parts that can't be missed for a pirate ship! Cannon, Rope ladder, Barrel, Wooden box, Anchor
  • Accessories: Anchor, Figure x6 (Nami, Chopper, Ussopp, Luffy, Sanji, Zoro), Barrel, Wooden Box, Rope Ladder, Cannon, Orange Tree x3, Display Stand

RM116.00
RM116.00 Add to cart
img
SAVERM120.90

HG 1/144 Meteor Unit + Freedom Gundam

Bandai will also issue a huge, 1/144 scale Meteor Unit from Gundam Seed. Similar in concept to the Dendrobrium, this monster measures 57cm (22-1/2 inches!) long when completed, and includes a new-color version of the Freedom Gundam (photos show the Justice Gundam, but only the Freedom Gundam is included with the kit!). 

RM320.00
RM320.00 Add to cart
img
SAVERM15.90

[Bandai] Gundam MG/HG Action Base 1 (Black)

A display stand for holding SD, 1/144 & 1/100 scale Gundam models, includes various adapters and holders to fit almost any Gundam kit (exclude PG grade)! Assembles required.

RM18.00
img
SAVERM15.90

[Bandai] Gundam MG/HG Action Base 1 (Gray)

A display stand for holding SD, 1/144 & 1/100 scale Gundam models, includes various adapters and holders to fit almost any Gundam kit (exclude PG grade)! Assembles required.

RM18.00
img
SAVERM400.90

PG 1/60 Zeta Gundam

  • Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  • Zeta Gundam, the best of both models. Gimmick Built-parts issue.
  • Expand the abdomen and the head cover in conjunction with mobile chest.
  • Work together to deploy a dedicated beam rifle scope barrel / grip /.
  • Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
  • Deformable skeleton (full frame mover) in combination with external armor
  • Pursued the reality of the Mobile Suits.
  • Combined with a snap-fit \u200b\u200bassembly and service.

RM700.00
RM700.00 Add to cart
img
SAVERM52.90

[093] HGUC 1/144 FA-93 Nu Gundam HWS

The Nu Gundam Heavy Weapons System, from the CCA-MSV series of alternate versions of Mobile Suits from the film 'Mobile Suit Gundam: Char's Counterattack', joins the HGUC lineup. Heavy Weapons System includes: additional armor for the Nu Gundam (chest, front and rear skirts, and large leg thruster units), a Hyper Mega Rifle, and a large shield with rocket launchers. Missile pod units on the chest armor pivot up and down. Fin Funnel unit can be disassembled into individual folding plates. Heavy Weapon System can be removed for display as a standard Nu Gundam. It includes Hyper Mega Rifle, large shield, beam rifle, Hyper Bazooka, normal shield, 2 beam sabers, and 6 Fin-Funnel plates.


According to wikipedia
The FA-93HWS ν Gundam Heavy Weapons System Type is a mobile suit featured in the original design series Char's Counterattack: Mobile Suit Variations.

Anaheim Electronics planned to improve the newtype use RX-93 ν Gundam by equipping it with the F.S.W.S (Full-armor System and Weapon System), which included removable chobham armor to increase its protection and includes two shoulder missile pods that flank either side of the head. The ν Gundam's shield also replaced by a larger shield with built-in thrusters, to counter the Heavy Weapon System's increased mass. The heavy beam rifle also increased the firepower of ν Gundam. However, the Heavy Weapon System plan was never completed due to ν Gundam's rushed deployment and eventual MIA status. It should be noted that the missile launcher components of the Full Armor are improved versions of the ZZ Gundam's missile launchers.

Weapons: 
  • 60mm Vulcan gun
  • Beam saber
  • Large beam saber
  • Beam rifle
  • Hyper bazooka
  • Hyper Mega Rifle - A beam rifle said to possess a power rating high enough to destroy anything at maximum output, it is the most powerful beam-type weapon of the suit. This weapon also supported ultra-long-range sniping and featured a bipod for precision firing. A sensor built into the rifle adjusts the power output according to the target's distance, and could be manually controlled via the mobile suit's psycoframe system. Its power output rivaled that of the main cannons of UC battleships. To improve accuracy, it was partly controlled by newtype psycommu waves.
  • High Mega Shield (Armor) - A variation of the RX-93's shield, it is thicker for solid-weapon endurance and can equip a ballistic missile launcher that detonates with enough destructive power to erase a number of suits when it makes contact with any surface. Due to its slow movement speed it is preferable to use it at point-blank range to inflict enormous damage without missing the target. Other than that, the shield has two fixed beam cannons, with power output rivaling that of the ZZ Gundam's High Mega Cannon.
  • Beam cannon
  • Missle launcher
  • Small missle
  • Shoulder Missile Launchers - An improved version of the multi use launchers that were widely used in the Gryps Conflict, the Missile Launchers mounted on the shoulders of the H.W.S. can use a wide variety of munitions, which included the Psycommu Grenade. Apparently, it is linked to the later development of a weapon called the "Funnel Missile".
  • Fin Funnels - Considered one of the most deadly weapons in UC history, the funnels were individual remote weapons that could fly off and attack from receiving the psycommu waves of the pilot. Fin funnels were funnels equipped with their own generator, which greatly increased their capabilities. They needed less frequent charging, and were able to generate a fin funnel barrier, a defensive field, around friendly units.

RM115.00
RM115.00 Add to cart
img
SAVERM62.40

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM87.50
img
SAVERM8.09

1/144 Scale Celestial Being Decal Sheet

Gundam decal sheet recommended for use on HG Gundam Exia, Dynames and Kyrios kits.

RM3.90
img
SAVERM8.09

1/144 Scale Over Flag Decal Sheet

Gundam decal sheet recommended for use on HG Over Flags, Union Flags and Union Flags Custom II Kits

RM3.90
img
SAVERM119.81

MG 1/100 Destiny Gundam

  • Recreating the unique features of this dynamic Mobile Suit, Mobile Suit Gundam SEED Destiny -titular Suit is reincarnated as a Master Grade kit! 
  • Moveable gimmick tuned to the movement of the collar area.
  • Gimmick included to expand the hip joint, allowing for a wider range of motion.
  • Accurate proportions highlight the characteristic silhouette of the Destiny Gundam. 
  • Includes 1/100 scale figures of Sinn and Stella.
  • Stand features a wing motif.
  • Accessories: High-Energy Long-Range Beam Cannon x1, Arondight Beam Sword x1, Beam Rifle x1, Shield x1, Beam Boomerang x2, Effect Part (Blade) x3, Effect Part (Boomerang) x2, Effect Part (Shield) x1, Beam Cannon Manipulators x2 (Left and Right), 1/100 Pilot Figure x2

RM168.00
RM168.00 Add to cart
img
SAVERM100.90

MG 1/100 Wing Gundam Zero Custom

Wikipedia information
  • The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
  • Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

RM133.00
RM133.00 Add to cart
img
SAVERM62.40

MG 1/100 Shining Gundam

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

RM87.50
img
SAVERM156.90

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM273.00
RM273.00 Add to cart
img
SAVERM94.90

MG 1/100 Shenlong Gundam EW Ver.

  • The 3rd volume of the EW version is Shenlong Gundam! 
  • The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced. 
  • Marking work designed by Hajime Katoki. 
  • Accessories: Dragon-Hang, Beam Trident, Shield

RM133.00
RM133.00 Add to cart
img
SAVERM15.90

[365] SDBB Sinanju

- SD weight of the volume while Shinanju appeared very suitable for MS! - SD in if you are a full Pureibaryu! - Moving from side to side mono eye look and move! - SD original! Respectively variations in upper and lower body Bisutomodo! - Parts Weapon rich! - SD completely reproduce patterns while the combination of weapons. - Accessories: A-xe beams x 2, beam rifle, grenade launchers, shields, Beam saber, pedestal

RM40.00
img
SAVERM4.90
RM24.00
img
SAVERM62.40

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM87.50
img
SAVERM45.90

[111] HGUC 1/144 ZZ Gundam

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

RM92.00
img
SAVERM62.40

[004] RG 1/144 MS-06F Zaku II

  • Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  • The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  • F type armor is faithfully reproduced. 
  • Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  • Adopted the ""Advanced MS joint"". 
  • The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  • Runner x9, Realistic decal x1, Instruction manual

RM87.50
img
SAVERM137.40

MG 1/100 00 Gundam Seven Sword/G

  • From Mobile Suit Gundam 00V: the variant of the Gundam 00- the 00 Gundam Seven Sword!
  • Includes an arsenal of weaponry. 
  • Both the Suit and weapons are packed with gimmicks!
  • Includes new kneecap parts unique to the Seven Sword!
  • Includes all Seven Swords and the GN Sword II Blaster! 
  • GN effect parts are reproduced using clear parts, and fixed joint are installed for easy weapon manipulation. GN Sword II Blaster features an expandable hilt, and can be mounted onto the binder.
  • Both Shield and Sword mode mode of GN Buster Sword II can be reproduced!
  • LED unit (sold separately) can be installed for a more accurate look!
  • Also includes GN Sword II Long and Short (both featuring gimmicks), and GN Katars can be connected to shift to shield form!

RM192.50
RM192.50 Add to cart
img
SAVERM62.40

[005] RG 1/144 Freedom Gundam

  • Freedom Gundam, the main MS of "Mobile Suit Gundam SEED", appears in the RG series. 
  • The forms of its wings are designed on the basis of investigation of real machines, and new frames improve its movability. They add realism on it. 
  • The "Lupus" beam rifle can be attached to the shield and add the stock. 
  • The beam of the Lacerta beam saber is recreated with transparent parts. It can be worn at the waist. 
  • The laminate anti beam shield can be mounted to its arms. 
  • You can recreate its high mat mode and full burst mode. 
  • Realistic decals improve its reality. 
  • runner (includes advanced MS joint) x9, realistic decal x2, instruction manual 

RM87.50
img
SAVERM122.90

Bandai MG 1/100 Force Impulse Gundam

  • The commercialization of the Mobile Suit Gundam SEED DESTINY] Force Impulse Gundam Shin Asuka to boarding that appeared in at the long-awaited MG.
  • Based on the TV set [Mobile Suit Gundam SEED DESTINY] original animation director is Shigeta Satoshi of cooperation, setting and, to pursue shape.
  • Fully reproduce the deformation and coalescence, which is a feature of the force impulse. Each form can be exhibitions by the landing gear.
  • And when leg flyer, MS form at the time, both legs of the interlocking gimmick internal organs. Other, you can have contact to the elbow, and the interlocking mechanism built.
  • The side armor, deployment knife Built

RM146.00
RM146.00 Add to cart
img
SAVERM15.90

[Bandai] Gundam MG/HG Action Base 1 (Clear)

Original Bandai Product

Action Base for MG 1/100 or HG, RG 1/144 Gundam

Few Color for Selection
Bandai Action Base 1 - Clear (Transparent)
Bandai Action Base 1 - Black 
Bandai Action Base 1 - Grey
Bandai Action Base 1 - White

Perfect  stand for MG / HG or RG size Gundam, very stable.

RM18.00
img
SAVERM23.90

[R02] HG 1/144 Duel Gundam Assaultshroud

  • The HG SEED series are fully redesigned along with the release of the re-mastered HD of "Mobile Suit Gundam SEED". 
  • Redesigned for being compatible with the action base 2 (sold separately). 
  • Marking stickers such as the identification number are newly included. You can improve its looks with them. 
  • The packages are completely newly designed. 
  • The colors are made new due to the re-mastered animation.

RM48.00
img
SAVERM94.90

MG 1/100 Heavyarms / Heavyarm Gundam EW

  • The first 5 [G] Hebiamuzu appearance! 
  • Flexible movement on it's posture, with BIG ARM weapon - Accessories: Shield, beam gatling, army k-nife, concealed arms (saber charged)

RM133.00
RM133.00 Add to cart
img
SAVERM151.90

MG 1/100 RX-0 Unicorn Gundam 02 Banshee

This black variant of the Gundam Unicorn first revealed in episode 4 of “Mobile Suit Gundam Unicorn,” features an all dark and yellow color scheme with a special translucent orange-yellow frame that shines under a black light meant to simulate the fiery glow of the “Psycho Frame”. This MG version features the OVA exclusive weapons, the Armored Arm VN and Armored Arm BS that mount on its arms and is fully transformable between Unicorn and Destroy Mode. Molded in colors meant to represent a black lion, complete with golden mane and requiring no glue for assembly, the Banshee is a must have Gundam design from “Gundam Unicorn”. Other accessories include 4 beam saber handles, 2 beam saber parts, pilot figure x2 (standing, sitting), transformable V-fin x 1 , static V fin x 2 (Unicorn/Destroy).

RM213.50
RM213.50 Add to cart
img
SAVERM199.90

MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka

  • Novel version [Gundam UC] The Full Armor Gundam unicorn appeared in the late Master Grade! Fukui the author said , with the cooperation of Mr. Katoki (a mechanical designer), adding new weapons to the Unicorn. A number of packed with gimmicks to reproduce the militants.?
  • Includes armed 27 ++ Beam rifle, bazooka, and hand grenades, armed supplied All nine, 27 items + + equipped with all available weapons!?
  • Armed rich, can be fitted together. Beam rifle, hyper bazooka, Grenade launcher, etc. You can even hand. In addition, hyper bazooka can be fitted to concentrate on other weapons.?
  • Hyper Beam Javelin Armed new design! New design based on the image of Mr. Fukui Javelin was hyper beam. Exposure, such as the psycho-frame, with a large number of gimmick.?
  • Backpack equipped with arms for extra frame. Inset from the bottom of the backpack Folding arm joint so crowded, you can hold firmly.?
  • Besides the shield left and right arms, the back is also equipped ships with a total of three pieces.?
  • Comes with a stand to support the huge back thrusters. In heavily armed, and well Can be displayed. - Accessories: Beam Rifle x 2, saber x 2, bazooka x 2, hand grenades x 4, Missile Launcher with Grenade Launcher x 2 x 2,3, heat saber x 4, shield x 3, Gatling Gun x 6, Hyper Beam javelin x 2, only joint action based Figures x 4, support stand thruster expression x 1, Secret Parts.
Families of Unicorn series in glance:
  • BB-360 Unicorn Gundam
  • BB-360 Unicorn (Expo Version)
  • RX-0 Unicorn Gundam 02 Banshee (MG)
  • ?
  • Unicorn Gundam 02 Banshee (Unicorn Mode)
  • [134] Unicorn Gundam 02 Banshee (Destroy Mode) (HGUC)
  • RX-0 Unicorn Gundam HD Collar +MS CAGE
  • RX-0 Unicorn Gundam Destroy Mode
  • Unicorn Gundam Destroy Mode Titanium Finish
  • RX-0 Full Armor Unicorn Gundam Ver.Ka (MG)
  • RX-0 Unicorn Gundam (MG)
  • RX-0 Unicorn Gundam Ver.Ka

RM280.00
RM280.00 Add to cart
img
SAVERM2.10

Gundam Accessories - Glow in the dark Sticker (10cm x 15cm)

Dimension: 10 cm x  15 cm 

Colors: Jade Color under daylight and, grow in the dark. 

Guide: 
1) Let the paper absorb light for 30 minutes to an hour (you may use torch light, or place under the sun), and it may grow it's light for a long time. 

2) Cut the paper to the right size to be used on the gundam, and stick on it, that's it. 

Tips: Stick the foil sticker included in the bandai original gundam box at the back of this product, and follow the size to cut the shape to ease the re-modelling.

RM3.90
img
SAVERM104.90

MG 1/100 Duel Gundam Assault Shroud

  • Duel Gundam Assault Shroud recreated as a Master Grade! 
  • The second in the SEED Remaster series, the Duel Gundam is designed on the versatile X100 frame system! 
  • Simple assembly provides the maximum range of motion with a minimum number of parts.
  • Completely redesigned for the Remaster series of MGs.
  • Reproduce the attachable Assault Shroud gimmick! 
  • Cockpit hatch opens and closes, and cockpit internals are detailed.
  • Yzak Joul figures included- sitting and standing
  • Designed using exclusive blueprints for this Master Grade kit. 
  • Accessories: Shield, 57mm High-Energy Rifle with 175mm Grenade Launcher,
  • Shiva 115mm Rail Gun, 250mm 5-Barrel Missile Pod, 350mm Bazooka, Saber x2

RM147.00
RM147.00 Add to cart

Showing 31 - 60 of 3351 products