Price Clear







Gundam Parts

Showing 991 - 1020 of 1317 products

img
SAVERM10.00

[Third Party] HG 1/144 Gundam Barbatos Metal Mace (Silver)

[Third Party] HG 1/144 Gundam Barbatos Metal Mace


Brand : OEM 
Material : Metal 
Color : Silver
Scale : 1/144

* Note : Gundam Barbatos is not included

RM14.00
img
SAVERM4.80

[Metal Part] 4.0mm Ribbed Shell Screw * 4 units

4.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 4.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
img
SAVERM3.00

[Metal Part] U1 Metallic Silver Air Vents / Thruster for Gundam Kit - 4pcs

  • Easy installation
  • Widest diameter:8.5mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (4 vents)
  • MG F.A. Unicorn Gundam (4 vents)
  • MG Nu Gundam Ver KA (4 vents)

RM7.80
img
SAVERM13.00

HG/RG/MG Gundam Display Case with LED (20x20x30 cm)

Brand: VT

- Suitable for any HG/RG/PG Gundam (MG kits without wing expansion and action base)
- Size : 20cm (width) x 20cm (length) x 30cm (height)
- Built in LED unit (White color only) (no lighting mode)
- USB cable is included
- Dustproof display case
- Self assembly required + solid strong support on the edge of the glass. 
- Able to fit small size HG and RG model kits with action base.
- Power adapter is not included
- Support power bank and smart phone adapter for power supply

RM55.00
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (White)

[Third Party] Single Stand Action Base MG/RG/HG (White)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Red)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Red)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
img
SAVERM11.00

[Third Party] HG 1/144 Gundam Barbatos Metal Mace (Gray)

[Third Party] HG 1/144 Gundam Barbatos Metal Mace


Brand : OEM 
Material : Metal 
Color : Gray
Scale : 1/144

* Note : Gundam Barbatos is not included

RM13.00
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y1, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y1, Gold)

  • Specifications : Maximum diameter 6mm, Height 6.5mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y5, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y5, Gold)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM8.20
img
SAVERM11.50

[Metal Part] HG / MG Scale Gundam Model kit Metal Modification Bar / Stick (8 units)

HG / MG scale Gundam Model kit  Metal Tonic

* Detail Modification 
* Universal compatible
* Detail Bar / Pole Decorative Bar

Bar length : 10 mm
Joint Diameter : 1.0mm
8 units in the package

RM6.50
img
SAVERM4.50

[Metal Part] Energy Cable Tubes Pipes Seamless Type (M Size, 4mm)

4mm M size Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm

Package include
- 20 units Energy Tube Ring
- 1 x 20 cm Spring pipe
 
(This product not include any figure)

RM9.50
img
SAVERM5.00

[Metal Part] Energy Cable Tubes Pipes Seamless Type (L Size, 5mm)

5mm L Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 5mm

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Nu Gundam

[Da Lin] Water Decal for RG 1/144 Nu Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Brown Colour

  • Diameter: 5.0mm 
  • Brown colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on 1/144 or 1/100 DOM, MG Zaku

RM2.40
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Full Armer RX-78 FA-78-1

[Da Lin] Water Decal for MG 1/100 Full Armer RX-78 FA-78-1

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Full Armer RX-78 FA-78-1

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Unicorn + MS Cage

[Da Lin] Water Decal for MG 1/100 Unicorn + MS Cage

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Unicorn + MS Cage

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits- Product from Hong Kong

RM10.00
img
SAVERM11.00

[Da Lin] Water Decal PG 1/60 Unicorn Banshee Gundam

[Da Lin] Water Decal PG 1/60 Unicorn Banshee Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Water Decal PG 1/60 Unicorn Banshee Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Red Zeta

[Da Lin] Water Decal for MG 1/100 Red Zeta


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Red Zeta
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for HG 1/144 Thunderbolt Zaku Series

[Da Lin] Water Decal for HG 1/144 Thunderbolt Zaku Series


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for HG 1/144 Thunderbolt Zaku Series
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Gold Colour

  • Diameter: 5.0mm
  • Gold colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Pink Colour

  • Diameter: 5.0mm
  • Pink colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Red Colour

  • Diameter: 5.0mm
  • Red colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 HiRM Ver Wing Zero

[Da Lin] Water Decal for MG 1/100 HiRM Ver Wing Zero


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 HiRM Ver Wing Zero
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Aile Strike Gundam

[Da Lin] Water Decal for RG 1/144 Aile Strike Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Aile Strike Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM8.00

[Da Lin] Water Decal for 1/48 Mega Size Unicorn

[Da Lin] Water Decal for 1/48 Mega Size Unicorn

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for 1/48 Mega Size Unicorn
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
img
SAVERM21.90

LED Unit Dual Type (White_Blue/Red)

-A dual type LED unit appears as a single item!

(Batteries not included)

- The upper LED is white. The side LED alternates between blue and red by pressing the switch.
- Produce a premium feeling with a soft light.
- Equipped with an automatic light-off mode (3 minutes) and a continuous light-on mode (continuous light).
- Can be used for Figure-rise Standard ULTRAMAN SUIT ZERO -ACTION- (sold separately).
- (LR41) x 2 (sold separately)


RM38.00
img
SAVERM6.00

[Da Lin] Water Decal for RG 1/144 MSN-04 Sazabi (Bronzing Gold Color Coating)

[Da Lin] Water Decal for RG 1/144 MSN-04 Sazabi

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for Bandai Real Grade 1/144 MSN-04 Sazabi Gundam Model Kit.
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
img
SAVERM8.00

[Da Lin] Water Decal for EVA Neon Genesis Evangelion Model Kits

[Da Lin] Water Decal for EVA Neon Genesis Evangelion Model Kits

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for [Da Lin] Water Decal for EVA Neon Genesis Evangelion Model Kits
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00

Showing 991 - 1020 of 1317 products

Contact Us