PRODUCTS

Price Clear







Brand

Availability

Gundam Parts

Showing 841 - 870 of 1236 products

Quick View
img
SAVERM11.90

[Bandai] MG/HG Action Base 1 Celestial Being Ver.

Special Action Base shaped as the Celestial Being emblem from Gundam 00! A display stand for holding 1/100 and 1/144 scale Gundam models, includes various adapters and holders to fit almost any Gundam kit! Easy to assemble.

RM30.00
RM30.00 Request Stock
Quick View
img
SAVERM4.90

[Third Party] Action Base 1 for MG 1/100 and RG,HG 1/144 (White)

[TGF] Action Base MG/HG (White) (1/100,1/144)

  • NOTE: Adapter is all 8mm in size.
  • This is a non-Bandai action base

RM15.00
RM15.00 Request Stock
Quick View
img
SAVERM14.90

Anubis MFB-03 Transformable Action Base for 1/144 and 1/100

Anubis MFB-03 Transformable Action Base 


Suitable for 1/144 and 1/100 scale kit.
Can play as a shield accessories. 

RM15.00
RM15.00 Request Stock
Quick View
img
SAVERM19.90

[CG] Gundam Machine Nest Type H

  • Machine Nest Type H
  • This action base able to connect with other machine nest types to expand the storage.
  • Able to integrate with other manufacturer's action base

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM6.10

[Bandai] Gundam Decal Mobile Suit Gundam Side Story The Blue Destiny Multiuse 1 #120

  • Mobile Suit Gundam Side Story The Blue Destiny Multiuse 1
  • Bandai

RM17.90
RM17.90 Request Stock
Quick View
img
SAVERM6.10

Bandai Water Decal #118 for GM Sniper II/GM Command

  • [Bandai] GM Sniper II/GM Command (MG) Water Decal #118
  • Extra touch of detail fpr modeling kits 

RM17.90
RM17.90 Request Stock
Quick View
img
SAVERM19.70

[039] HGBC 1/144 Ptolemaios Arms

HGBC 1144 Ptolemaios Arms


Custom parts that look like Ptolemaios, the mother ship featured in "Mobile Suit Gun dam 00" also known as Ptolemy, have arrived. Parts appropriate for a GN container can be changed into claws and can also be held in both hands. The body itself can be taken apart and joint parts can be used to connect two hole joints. The set can power up a variety of Gunpla!   

Accessories:
- Joint A (for container connection) x 4
- Joint B (for mounting backpack) x 1
- Joint C (general purpose) x 2
- Joint D (for claw deployment) x 4

Product Content:
- Runners x 8
- Sticker x 1
- Manual x 1

RM34.20
RM34.20 Request Stock
Quick View
img
SAVERM13.10

[038] HGBC 1/144 Spinning Blaster

HGBC 1/144 Spinning Blaster


From the world of "Gundam Build Fighters" comes the highly customizable Spinning Blaster weapon! Rotate the gear to change the weapon's form, and use the included parts to make it even larger and more powerful!

RM22.80
RM22.80 Request Stock
Quick View
img
SAVERM14.90

[Figure-rise Effect] Blast Wave White

Figure-rise effect  Blast Wave WHITE


An outstanding usability effect appears in figure-rise Effect!

- Effects like high-speed movements and track slash effects. Usage depends on the user !
- Combine display bases (sold separately) to make even larger effects.

- accessories
- Shock wave effect x 1 formula
- Rock x 1 formula
- Display base x 1

- Product content
- Molded product x 3
- Instruction manual x 1

RM30.00
RM30.00 Request Stock
Quick View
img
SAVERM26.30

[041] HGBC 1/144 Machine Rider

HGBC 1/144 MACHINE RIDER


A speedy transforming bike that can be mounted by any HG Gunpla to ride around in, and it able to transform between motorcycle from and mecha form. The machine rider also comes with 3 types of cowl part for you to select! 

Accessories:
- Motorcycle body x 1
- Front cowl parts x 3
- Display base x 1

Product content:
- Runner x 7
- Instruction manual x 1

RM45.60
RM45.60 Request Stock
Quick View
img
SAVERM17.50

[042] HGBC 1/144 Sky High Wings

HGBC 1/144 SKY HIGH WINGS


Large and small size wing parts that can be used to attach and customize all sorts of Gunpla! Various attachment joints are included, and since the wings come in white they can be adapted to fit a wide range of color schemes and designs.

Accessories:
- Wing (large and small) x 1 each
- Backpack joint x 1set

Product content:
- Runner x 4
- Instruction manual x 1

RM30.40
RM30.40 Request Stock
Quick View
img
SAVERM11.90

[043] HGBC 1/144 Build Hands [Edge][Kaku] (S,M,L)

A new set of hands based on the Jigen Build Knuckles, these hands with square styled fingers are featured in a newly designed package and are perfect for martial art type Gundams like Jiyan Altron. Includes Left and Right versions of fists, open palms, and holding hands in different 1/144 sizes. 

Product size: Approx 5" Package size: Approx 5.9 x 7.4 x 2.6 inch

Accessories:
- Hand Parts S (3 types x right and left) x 1 each
- Hand Part M (3 types x right and left) x 1 each
- Hand Parts L (3 types x left and right) x 1 each

Product content:
- Runner x 2
- Instruction manual x 1

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM11.90

[044] HGBC 1/144 Build Hands [Round][Maru] (S,M,L)

A new set of hands based on the Jigen Build Knuckles, these round finger styled hands are featured in a newly designed package and are perfect for martial art type Gundams like Jiyan Altron. Includes Left and Right versions of fists, open palms, and holding hands in different 1/144 sizes. 



Accessories:
- Hand Parts S (3 types x right and left) x 1 each
- Hand Part M (3 types x right and left) x 1 each
- Hand Parts L (3 types x left and right) x 1 each

RM24.00
RM24.00 Request Stock
Quick View
img
SAVERM14.90

[Figure-Rise Effect] Blast Wave Yellow

[Figure-Rise Effect] Blast Wave Yellow


An outstanding usability effect appears in figure-rise Effect!

- Effects like high-speed movements and track slash effects. Usage depends on the user !
- Combine display bases (sold separately) to make even larger effects.

- accessories
- Shock wave effect x 1 formula
- Rock x 1 formula
- Display base x 1

- Product content
- Molded product x 3
- Instruction manual x 1

RM30.00
RM30.00 Request Stock
Quick View
img
SAVERM13.10

[040] HGBC 1/144 Binder Gun

HGBC 1/144 Binder Gun

A set of combining Binder Guns which can create various blade and gun modes. Includes numerous joints for customizing various HG kits. Runner x3, Instruction manual.

Accessories: 
- Binder Parts Small x 2
- Binder Parts Larx2
- Gun Part x 1
- Joint Part  x 1

RM22.80
RM22.80 Request Stock
Quick View
img
SAVERM6.00

Caution Sign & Screw Metal Effect Decal

Caution Sign & Screw Metal Effect Decal


- Suitable for any grade of Gunpla.
- Extra metal effect enhancement for modeling kits
- Non Bandai product

RM14.00
RM14.00 Request Stock
Quick View
img
SAVERM10.10

[Third Party] Action Base 2 HG/RG (Clear Blue) (1/144)

[TGF] Action Base HG/RG (Clear Blue)


Suitable for every 1/144 scale and SD kit.
This is a Non-Bandai product.

RM9.80
RM9.80 Request Stock
Quick View
img
SAVERM278.60

PG 1/60 LED Unit for Gundam Exia

PG 1/60 LED UNIT FOR GUNDAM EXIA


The LED system is very nicely made. It has 4 modes to choose from, and the 5th mode is an automatic cycle of mode 1-4.

The battery compartment is integrated into the action stand, and the LED system designed in a way that you need to plug in the GN drive for the system to work ;)

You can also plug the GN drive onto a special compartment on the action stand and display the Exia in maintenance mode.

RM560.00
RM560.00 Request Stock
Quick View
img
SAVERM30.60

[Metal Part] MG 1/100 MS-18E Kampfer Metal Enhancement Part Set

MG 1/100 MS-18E Kampfer Metal Enhancement Part Set

It contain 16 types of metal parts for MG 1/100 MS-18E Kampfer to enhance

1. Green Metallic Lens Eye for MG Kamfer x 1
2. Head Vulcan Pod x 2 set
3. Shoulder Thorn Metal Spikes ZC 2 x 3
4. Shoulder Thruster, C1 x 6 set (3 pair)
5. Joining Angle Detailing Enhancement Parts J1  x 4 units
6. Aviation Hole 2.5 mm x 22
7. Chest Part Thruster, C2 x 2 
8. Backpack Main Thruster, C7 x 2
9. Backpack Secondary Thruster, C1 x 1
10. Lower Leg Back Thruster, C7 x 2
11. Lower Leg Front Thruster x 2
12. Calf Part Back Thruster x 2
13. Calf Part Side Thruster, C2 x 2
14. Energy Pipe on Waist x 1
15. Flat Head Screw x 30
16. Aviation Hole 2.0 mm x 15

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package


Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM113.40
RM113.40 Request Stock
Quick View
img
SAVERM21.70

[Metal Part] MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual parts quantity.

Index          Parts                                                               Installation Instruction
1.                  Back Pack Thruster x4                              drill 1.5mm hole, attached to point with minor cement
2.                     Back Skirt Thruster x2                               drill 1.5mm hole, attached to point with minor cement
3.                     Lower Leg Thruster x2                               drill 1.5mm hole, attached to point with minor cement
4.                     Elbow Joint Screw x4                                 drill 2.0mm hole, attached to point with minor cement
5.                     Knee Joint Screw x4                                   drill 2.0mm hole, attached to point with minor cement
6.                     Gatling Gun Muzzle x24                             drill 2.0mm hole, attached to point with minor cement
7.                     Gatling Gun Sight x6                                   Install directly and attached to point with minor cement  
8.                     Gatling Gun Sight Back Cover x6           drill 2.0mm hole, attached to point with minor cement
9.                     Booster Thruster x4                                     drill 2.0mm hole, attached to point with minor cement
10.                   Aviation hole x15                                         drill 2.0mm hole, attached to point with minor cement

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package


Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM80.30
RM80.30 Request Stock
Quick View
img
SAVERM9.60

[Metal Part] MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual parts quantity.

Index         Parts                                                        Installation Instruction
1.                 Back Pack Thruster                               drill 1.5mm hole, attached to point with minor cement
2.                     Elbow Joint Screw                               drill 2.0mm hole, attached to point with minor cement
3.                     Knee Joint Screw                                 drill 2.0mm hole, attached to point with minor cement
4.                     Back Thruster                                        drill 1.5mm hole, attached to point with minor cement
5.                     Leg Thruster                                           drill 1.5mm hole, attached to point with minor cement
6.                     Flat Head Screw                                   drill 2.0mm hole, attached to point with minor cement
7.                     Aviation hole                                          drill 2.0mm hole, attached to point with minor cement

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package


Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM62.40
RM62.40 Request Stock
Quick View
img
SAVERM17.40

[Metal Part] MG 1/100 RGM-96X Jesta Metal Enhancement Part Set

MG 1/100 RGM-96X Jesta Metal Enhancement Part Set

It contain 7 types of metal parts for MG MS-06J Zaku Ver 2.0 to enhance

1. MG 1/100 LED Unit with Battery (Orange) x 1 (Battery include)
2. Aviation Hole for Head Part 3.0 mm x 15
3. Shoulder Thruster, X1 x 3
4. Aviation Hole for Body 1.6 mm x 15
5. Aviation Hole for Body 2.0 mm x 15
6. Metal Silver Bead Ball 1.5mm x 50
7. Flat Head Screw 2.0mm x 30

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package

Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM54.60
RM54.60 Request Stock
Quick View
img
SAVERM19.90

[CG] Gundam Machine Nest Type F

  • Machine Nest Type F
  • This action base able to connect with other machine nest types to expand the storage.
  • Able to integrate with other manufacturer's action base

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM19.90

[CG] Gundam Machine Nest Type G

  • Machine Nest Type G
  • This action base able to connect with other machine nest types to expand the storage.
  • Able to integrate with other manufacturer's action base

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM4.90

[Third Party] Action Base 1 for MG 1/100 and RG,HG 1/144 (Clear Black)

[TGF] Action Base MG/HG (Clear Black) (1/100,1/144)

  • NOTE: Adapter is all 8mm in size.
  • This is a non-Bandai action base

RM15.00
RM15.00 Request Stock
Quick View
img
SAVERM4.90

[Third Party] Action Base 1 for MG 1/100 and RG,HG 1/144 (Clear Red)

[TGF] Action Base MG/HG (Clear Red) (1/100,1/144)

  • NOTE: Adapter is all 8mm in size.
  • This is a non-Bandai action base

RM15.00
RM15.00 Request Stock
Quick View
img
SAVERM17.50

[045] HGBC 1/144 No Name Rifle

[045] HGBC 1/144 No Name Rifle


The main equipment of the Gundam Astray no-name! Can be transformed into defense, long range shooting, and neutral configurations. Includes also a wide variety of joint parts to customize on your Gunpla!

Accessories:
- No-Name rifle x 1
- Joint parts for shooting mode x 1
- Joint parts for backpack mode x 1
- Joint parts for defensive form x 1
- Expansion joint parts x 1 formula

Product content:
- Runners x 3
- Instruction manual x 1

RM30.40
RM30.40 Request Stock
Quick View
img
SAVERM13.90

Universal Action Base for HG & MG - Unicorn Gundam #01

Code: 01 Unicorn
Brand: Tian Mao
Suitable for HG, RG & MG
Material: Plastic

- Contains multiple adapters to fit different model kits
- Suitable for 1/144 and 1/100 scale model kits (HG,RG,MG & SD)
- Self Assembly required
- Height and angle are adjustable
- Available in 23 designs
- Solid joint and support high difficulty aerial poses.

RM22.00
RM22.00 Request Stock
Quick View
img
SAVERM10.90

Universal Action Base for HG & MG - Unicorn Gundam Banshee #02

Code: 02 Banshee
Brand: Tian Mao
Suitable for HG, RG & MG
Material: Plastic

- Contains multiple adapters to fit different model kits
- Suitable for 1/144 and 1/100 scale model kits (HG,RG,MG & SD)
- Self Assembly required
- Height and angle are adjustable
- Available in 23 designs
- Solid joint and support high difficulty aerial poses.

RM25.00
RM25.00 Request Stock
Quick View
img
SAVERM15.90

Universal Action Base for HG & MG - Unicorn Gundam Phenex #03

Code: 03 Phenex
Brand: Tian Mao
Suitable for HG, RG & MG
Material: Plastic

- Contains multiple adapters to fit different model kits
- Suitable for 1/144 and 1/100 scale model kits (HG,RG,MG & SD)
- Self Assembly required
- Height and angle are adjustable
- Available in 23 designs
- Solid joint and support high difficulty aerial poses.

RM20.00
RM20.00 Request Stock

Showing 841 - 870 of 1236 products