- Non. Bandai Product accessories used on scale 1/100 gundam robots. - Fingers is built up from 38 parts. - Finger can be re-colored / and used on almost all scale 1/100 gundam robots. - Finger that installed on robots can be installed on bandai / non-bandai - Almost all action on human finger can be made on this built on this pre-build finger, see attached screenshot. - Produced by Modeller's Assistant.
** Requires 3 AA battery for operation. ** Free battery included in the package. ** Please note this is non-bandai product.
The classic display base for all your 1/100 kits, but with a Char' Zaku II twist! This one is cast in an intimidating red variant with stickers designed for MG-098 and MG-099 to perfectly complement the Char' Zaku II! Included a piece of Char's Zaku Sticker for extra touch up.
- suitable for scale 1/144 any double O series gundam modelling kit. - This is the modified part, and not a gundam modelling kit itself, you may refer to the photo for more information. - No medal for this batch as it's not the first batch. - This weapon pack can be used on HG Gundam Harute, HG Gundam Zabanya, and HG Gundam Raphael as well! - The manual can be downloaded here: full-saberIV-manual.pdf
A display stand for holding SD, 1/144 & 1/100 scale Gundam models, includes various adapters and holders to fit almost any Gundam kit (exclude PG grade)! Assembles required.
Earth Federation Dedicated Action Base For 1/100 Scale
[Builder Parts] 1/100 MS Hand 01 (Federation)
- July 2012, a new line appeared in the builder's part! In the Detail-Up Parts, the Gundam More enjoyable! - With Gundam Part composition was conscious of compatibility is, of course, adopted the split parts considering the coloring. In addition, the if you are using the material, you can easily cut, glue, and coloring. - Appearance is, of course, attention to internal structure vernier parts! - 1/144, 1/100, enclosed are three types of cone type, flap type, each type of ring. - 1/144 to RG, 1/100 will correspond to the MG.
- At July 2012, a new product line appeared in the builder's part! In the detail-Up Parts, the Gundam modelling kit has turned more enjoyable! - With Gundam Part composition was conscious of compatibility is, of course, adopted the split parts considering the colouring. In addition, if you are using the material PS, you can easily cut, glue, and colouring. - Appearance is, of course, attention to internal structure vernier parts! - 1/144, 1/100, enclosed are three types of cone type, flap type, each type of ring. - 1/144 to RG, 1/100 will correspond to the MG. - The content of the commodity: × 2 conical [external shape, flap type × 2, ring type × 2, Jet type × 2 [internal shape, flap type, ring type, mounting parts × 8 <× 2 Sets>Item Size/Weight : 24.7 x 17 x 2.1 cm / 45g
[Builder Parts] 1/144 MS Spike 01
In the past, Mr. MARK SOFTER was used simply to soften decals.
However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models.
First, the area to which the decal will be affixed is painted and the decal is applied.
After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry.
Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces.
It is perfect even for poorly made decals from Eastern European models.
Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.
MG 1/100 Aile Strike Gundam Ver.RM + MG 1/100 Aile Strike Gundam Striker Ver. RM Launcher / Sword Strike Pack