• Home
  • Other Series Kits

PRODUCTS

Price Clear







Brand

Availability

Other Series Kits

Showing 1921 - 1950 of 1980 products

Quick View
img
SAVERM169.30

S.H.FIGUARTS Ultraman & Emi (ULTRAMAN: RISING)

From the CG animated feature film ULTRAMAN: RISING scheduled to be distributed worldwide on Netflix in 2024, Ultraman and the baby monster Emi have been made into three-dimensional figures by SHFiguarts.

- In line with the image in the play, the stylish whole body form and glossy silver and red coloring are also thoroughly reproduced.
-With a wide range of motion, various action poses such as the Specium Ray pose can be reproduced.
-Two types of replacement eye parts are included, allowing you to move your eyes from side to side.
- Emi is also included, based on the size in the play. The coloring of the whole body such as pink and yellow is also well reproduced.
? Emi's neck and limbs are equipped with movable mechanisms. Adorable gestures can also be reproduced.

RM250.00
RM250.00 Ask Availability
Quick View
img
SAVERM300.00

DX Chogokin YF-21 (Gard Gore Bowman Machine)

The unusual prototype variable fighter YF-21 piloted by Gard Gore Bowman in the OVA "Macross Plus" finally joins the "DX Chogokin" action-figure lineup from Bandai!

Completely new modeling enables three-stage transformation, and it can also get into its high maneuver mode (limiter release mode) with its limbs purged. 

Familiar equipment such as the FAST pack and gun pod are included. In Fighter mode, the engine nozzle fins move one by one. 

It's also equipped with an original gimmick on its legs, which, when combined with the sliding gimmick of the engine block, helps create the distinctive silhouette of both the Gerwalk and Battroid forms. Canopy parts for the Battrolid form is included too. 

The FAST pack can be attached to the figure, and one gun pod that attaches to the FAST pack is included, as is another one that can be unfolded and held in the hand. It can even perform the three-stage transformation when equipped with the FAST pack! 

Interchangeable hands are included, and it can be displayed parked by deploying the landing gear built into the body. 

Effect parts for the Pinpoint Barrier Punch are included too! 

The canopy opens and closes, and a figure of Gard Gore Bowman is included. 

Order this amazing machine for your own collection today!

[Figure Size]: Approximately 28cm tall in Battroid form
[Materials]: ABS, PVC, die-cast

[Set Contents]:
- Main figure
- Gunpod (x2)
- FAST pack set
- Gunpod parts for FAST pack (x2)
- Set of cover parts for high-maneuver mode
- Interchangeable hands (left and right, x2 each0
- Pilot figure
- Replacement canopy parts
- Engine nozzle fin (x6)
- Intake cover (left and right)
- Fold booster strut (front and back)
- Effect parts (x1 set)
- Joint parts for Battroid
- Special base set

RM1390.00
RM1390.00 Ask Availability
Quick View
img
SAVERM18.00

Tamashii EFFECT WIND Blue Ver. for S.H.Figuarts

This new "Tamashii Effect" part is inspired by violently swirling wind! Combine parts of various sizes to recreate a variety of scenes; you can use the holes in each part to display them in midair with the use of a Tamashii Stage (not included). It'll blow you away -- order yours today!

[Size]: Approximately 15cm high
[Materials]: PVC, ABS

[Set Contents]:
- Part A
- Part B
- Part C
- Part D
- Part E
- Part F

RM120.00
RM120.00 Ask Availability
Quick View
img
SAVERM39.00

S.H.MonsterArts Jet Jaguar [1973]

To celebrate the 50th anniversary of Godzilla vs. Megalon, we've crafted the S.H.MonsterArts JET JAGUAR |1973]! This figure came to life only after an exhaustive amount of research on the original 1973 suit. Sifting through stacks of still photos helped us work out the colors and replicate the Jet Jaguar's vivid image, and we also included interchangeable parts to allow you to get those eyes a-glowing. You can also switch out the antenna parts on his head to set him up for flight mode. Zoom! Last but not least, we've also thrown in a Jet Jaguar mini figure to show him before his gigantification!

RM560.00
RM560.00 Ask Availability
Quick View
img
SAVERM160.00

S.H.Figuarts Miriella Angel Airborne Squad/Mikari

- From the TV anime [2.5-Dimensional Temptation] comes an S.H.Figuarts of [Tachibana Mikari] dressed in the Miriella Angel Paratrooper costume.

- She appears in the Angel Paratrooper costume she wore at the summer event. In addition to a wide variety of facial and wrist parts, weapon parts are also included, so you can recreate various poses from the movie!

- Tachibana Mikari, who plays Miriella, has a [genius face] and her facial expressions, proportions, and even the texture of her costume have been thoroughly pursued.
- The weapon parts he held during the summer event are also included, perfectly recreating his appearance scene.
- Four interchangeable wrist parts are included for each side, and together with the facial parts, you can recreate a variety of poses from conversations and photo shoots in the movie.
- In addition to her standard face, Miriella comes with four interchangeable facial expressions: a smiling face, a serious face, a confident face, and an embarrassed face.
- By arranging it together with [S.H.Figuarts Liliel Angel Airborne Forces/Lirisa] (sold separately), who is also wearing the Angel Airborne Forces costume, the range of `matching` will expand! Don't miss the difference in proportions!

[Set contents]
Main unit
- Interchangeable wrist parts (4 types each for left and right)
- 4 types of interchangeable facial parts
- Weapon parts

RM320.00
RM320.00 Ask Availability
Quick View
img
SAVERM6.00

Third Party Brand RG Evangelion Unit-01 DX [Transporter Platform Set]

Third Party Brand RG Evangelion Unit-01 DX [Transporter Platform Set]

Brand : MaiGao
Model : Evangelion Unit-01 DX [Transporter Platform Set]
Grade : Real Grade
Code : R001S

Please note that this is NOT Bandai product

RM92.00
RM92.00 Request Stock
Quick View
img
SAVERM10.00

SNAA Super Nova 1/100 Emperor series - YR-03 Martial Emperor Plastic Model Kit

SNAA (Supernova) 1/100 Emperor series - Martial Emperor Plastic Model Kit

Brand : SNNA
Scale : 1/100 (MG Standard)
Code : YR-03
Product Height : 22cm

Package Include :
- Standard water decal
- Aluminum thin sticker
- The ultimate movable full body complete skeleton
- Detailed color separation
- Large stand base

RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM199.10

S.H.Figuarts (SHINKOCCHOU SEIHOU) Kamen Rider Double Fang Joker (FUUTO PI ANIMATED ANNIVERSARY)

The "S.H.Figuarts (SHINKOCCHOU SEIHOU) KAMEN RIDER DOUBLE Fang Joker" comes with newly sculpted effect parts to commemorate the anime adaptation of "FUUTO P.I.". With the effect parts, you can create an action effect just like in the anime. In addition, a pedestal part commemorating the anime adaptation is also included!

S.H.Figuarts SHINKOCCHOU SEIHOU From the "KAMEN RIDER DOUBLE Fang Joker" series, " Fang Joker" comes with new Maximum Saber effect parts and commemorative pedestal parts to celebrate the anime adaptation of "FUUTO P.I.".

Package: 
  • Main body
  • 6 types of interchangeable wrist parts (left and right)
  • Fang Memory
  • Joker memory
  • Arm Saver replacement parts
  • Maximum Saber Replacement Parts
  • Shoulder Saver Replacement Parts
  • Shoulder Saver Parts
  • Maximum Saber effect parts
  • "Fuuto PI" anime commemorative pedestal

RM340.00
RM340.00 Ask Availability
Quick View
img
SAVERM626.40

SOUL OF CHOGOKIN GX-113 Gundam Tryon 3

The first Gundam Series SOUL OF CHOGOKIN is here!
The ZZ Gundam-based three-body combination mecha "Gundam Tryon 3", which appears in "Gundam Build Fighters Try" celebrating its 10th anniversary, is an impactful lineup! A lion on the chest! Three bodies combined! A machine with elements of CHOGOKIN scattered throughout it makes a spectacular debut as the first Gundam item in SOUL OF CHOGOKIN series! The three bodies combine to form a complete transformation without any replacement parts. Weapons and effects from other works are also reproduced. It also uses plated parts, so its appearance is truly CHOGOKIN!
Package:
  • Main body
  • 4 pairs of interchangeable hands
  • Full set of weapons
  • Display stand
  • Effect set
  • Joint set
  • Complete pedestal support

RM1530.00
RM1530.00 Ask Availability
Quick View
img
SAVERM81.50

S.H.Figuarts Kamen Rider Geats Entry Raise Foam

KAMEN RIDER GEATS ENTRY RAISE FORM

- Faithfully express the proportions and texture of the body in the play. Enjoy dynamic action poses with an overwhelming range of motion! It is possible to change the form by rearranging parts with [S.H.Figuarts Kamen Rider Geez Magnum Boost Form] sold separately. Magnum shooter 40x (rifle mode) is included.

- Faithfully express the proportions and texture of the body in the play
- Enjoy dynamic action poses with an overwhelming range of motion!
- You can change the form by rearranging parts with [S.H.Figuarts Kamen Rider Geez Magnum Boost Form] sold separately!

[set content]
* Body
* Replacement wrist left and right 4 types each
* Magnum Shooter 40X (Rifle Mode)

RM218.00
RM218.00 Ask Availability
Quick View
img
SAVERM29.80

30MF Liber Assassin

* From 30 MINUTES FANTASY, where you can create your own fantasy job, comes the Liber Assassin!
* A starter set that includes the base Silhouette [body] as well as armor and weapon parts.
* Includes a Silhouette [body] with the same form as the separately sold 30MF River Knight.
* The Silhouette [body] is capable of flexible human-like actions and can be adapted to any job.
* By providing a movable axis on the head and neck, it is possible to perform effects such as pulling the chin in and sticking out the face.
* The shoulder joints are designed with a particular focus on structure, so the body lines do not collapse even with bold poses.
* The movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses.
* Armor and weapon parts are included to job change to Liber Assassin by combining with the Silhouette [body].
* Two daggers are included as weapons.
* Flexible movement is achieved by using a mechanism to attach shoulder and waist armor via the joint on the back.
* The attribute of the Element Core is Water.
* The face design and coloring are different from the Silhouette and Assassin of the Rozan Empire (sold separately).

[Accessories]
* Dagger x 2
* Armor parts x 1 set
* Hand parts x 1 set
* Joint parts x 1 set

RM90.00
RM90.00 Request Stock
Quick View
img
SAVERM109.40

HG 1/144 Gunleon

  • From the "Super Robot Wars OG" series, the long-awaited Gunleon, which can be transformed into Magna Mode by replacing parts, is now available!
  • Magna Mode can be recreated by transforming each part and replacing parts.
  • A wide variety of weapons are included, including the Riot Jarenti, which is about 230 mm long, which is longer than the full length of the unit.
  • Part of the Riot Jarenti can be deployed and transformed into Magna Mode.
  • The Gigg Gun can be stored in the variable boom on the back, and the Decker Spanner can be stored in the leg.
  • Jewel stickers are used on the red part of the waist, and plastic stickers are used on the black and orange parts on the side of the Chain Decutter.
  • Action Base 7 is included to expand the range of poses.

[Accessories]
  • Decker Spanner x 2
  • Riot Jarenti x 1
  • Gig Gun x 2
  • Chain Decutter deployed state parts x 1 set
  • Selectable parts for head x 1 set
  • Magna Mode parts x 1 set
  • Hand parts x 1 set
  • Action Base 7 x 1
  • Plastic sticker x 1
  • Jewel sticker x 1 
  • Sticker x 1

RM220.00
RM220.00 Request Stock
Quick View
img
SAVERM63.70

Figure-rise Standard Ultraman Tiga Multi Type (Plastic model)

  • Ultraman Tiga Multi Type" from "Ultraman Tiga" is now available in the Figure-rise Standard series!
  • The distinctive body color is reproduced by dividing the parts, and can be assembled without stickers.
  • The color coding is thoroughly reproduced, from the ears and back of the head to the clear forehead.
  • Effect parts that reproduce the charging/firing of the Zeperion ray are included.
  • Dynamic action poses can be reproduced with multiple movable axes built into the body.
  • The head movement is improved by the neck part going inward.
[Accessories]
  • 1 set of effect parts for Zeperion ray
  • 2 types of color timer
  • 1 set of hand parts

RM128.00
RM128.00 Request Stock
Quick View
img
SAVERM49.80

30MS Minutes Sister Richetta (Freesia Wear) [Color A]

  • Richetta, which appeared in the first 30MS release and has been leading the 30MS series, is now available with a completely new design!
  • The parts on the runners have been arranged to be "optimal," with an emphasis on ease of assembly and work flow, allowing for smooth assembly.
  • Customize into armed mode by assembling the armor parts!
  • Three rich expressions are included for the face parts, "normal," "smiling," and "confused," using tampo printing.
  • A large claw unit is suspended from the backpack, and it can be transformed and attached to the arm. The head comes with a cat-ear-like headband and a tail part made of lead wire.
  • The abdomen is designed with a mechanism to prevent the hip joint parts from coming off, so that they do not come apart when moving the legs during posing.
  • The "30 MINUTES SISTERS" lineup includes face parts, hairstyle parts, and body parts for each part. You can create your own sister by combining it with separately sold parts.
  • The soles of the shoes have 3mm joints that are suitable for customization, expanding the possibilities for customization. "30 MINUTES MISSIONS" parts can also be installed as options. (? The target age for the "30 MINUTES MISSIONS" kit is 8 years old and above)

[Accessories]
*  Face parts (tampo printing) x 3 types
*  Armor parts x 1 set
*  Joint parts x 1 set
*  Hand parts x 1 set
*  Lead wire x 1

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM29.90

30MS Minutes Sister Option Parts Set 14 (Spotter Costume) [Color B] (Plastic model)

  • The runner parts are arranged in a way that is easy to assemble and allows for easy work flow, and is "optimal" to allow for smooth assembly.
  • In addition to two unprinted face parts, two types of head parts (FP-I type) are included. By combining with the "30 MINUTES SISTERS Water Transfer Decal Universal" (sold separately), you can create expressive characters!
  • Hairstyle parts and headgear parts are included, and two types of chest parts are included as a choice.
  • The visor part is reproduced with a clear green PET sheet.
  • The "30 MINUTES SISTERS" lineup includes face parts, hairstyle parts, and body parts for each part. You can create your own sister by combining them with separately sold parts.
  • Uses 3mm joints common to the 30 MINUTES series. "30 MINUTES MISSIONS" parts can also be installed as options. (? The target age for the "30 MINUTES MISSIONS" kit is 8 years old and above)

[Accessories]
  • Body parts x 1 set
  • Chest parts (interchangeable) x 2 types
  • Joint parts x 1 set
  • Unpainted face parts x 2
  • Head parts x 2 types
  • Hairstyle parts x 1
  • Neck parts x 1 set
  • PET sheet x 1

RM60.00
RM60.00 Request Stock
Quick View
img
SAVERM55.70

30MS Minutes Sister Optional Hairstyle & Face Parts Set (Yuika Mitsumine/Kiriko Yukoku)

  • A set of hairstyle parts and face parts for "Mitsumine Yuika" and "Yuya Kiriko". You
  • can change the idols into various costumes by combining with the separately sold 30MS optional body parts.
  • The delicate flow of the hair is carefully three-dimensionalized, and the fluttering movement is expressed according to the pose.
  • The hair accessory can be attached and removed according to the design of the costume. By attaching and removing the parts, it is also possible to reproduce the state without the hair accessory.
  • Mitsumine Yuika's front hair part comes with glasses parts molded as one with the hair. It can be removed.
  • Yuya Kiriko comes with a right arm and right leg with a bandage design. The bandages on the left arm and left leg are reproduced with three-dimensional stickers.
  • Two types of facial parts are included, each with tampo printing.
  • It can be combined with the separately sold "30MS Optional Body Parts Beyond the Blue Sky 1 [Color A]", "30MS Optional Body Parts Alpha Sisters Phantasm 1 [Color A]", and "30MS Optional Body Parts Sigma Sisters Paradox 1 [Color A]".

[Accessories]
  • Mitsumine Yuika face parts (tampo printing) x 2 types
  • Yuutani Kiriko face parts (tampo printing) x 2 types
  • Yuutani Kiriko (bandaged arm and leg parts) x 1 type each
  • Hairstyle parts x 1 set each
  • Sticker x 1

RM112.00
RM112.00 Request Stock
Quick View
img
SAVERM13.90

30MF Minutes Fantasy Class Up Armor (Liber Warrior)

  • From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Class Up Armor (Liberal Warrior)"!
  • A set of armor and weapons that can be "classed up" to a higher-level job by using "Armor Cross" [armor replacement].
  • By combining it with the separately sold "30MF Liberal Fighter," it is possible to "class up" to "Liberal Warrior."
  • A "Warrior" is a job for professional fighters with high combat skills and a powerful physique.
  • A different face design and coloring from the "Warrior" of the Rozan Empire, sold separately.

[Accessories]
  • 1 set of armor parts
  • 1 set of weapon parts

RM28.00
RM28.00 Request Stock
Quick View
img
SAVERM13.90

30MF Minutes Fantasy Class Up Armor (Liber Viking)

  • From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Class Up Armor (Rieber Viking)"!
  • A set of armor and weapons that can be "classed up" to a higher-level job by "Armor Cross" [armor replacement].
  • By combining it with the separately sold "30MF Rieber Fighter," it is possible to "class up" to "Rieber Viking."
  • "Viking" is a job that has combat abilities higher than Fighter and excels in a rough fighting style.
  • A different face design and coloring from the "Viking" of the Rozan Empire, sold separately .

[Accessories]
  • 1 set of armor parts
  • 1 set of weapon parts

RM28.00
RM28.00 Request Stock
Quick View
img
SAVERM35.80

30MF Minutes Fantasy Rozan Fighter

  • From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Rozan Fighter"!
  • A starter set that includes the base "Silhouette" [body] as well as armor and weapon parts.
  • The "Silhouette" [body] allows for flexible actions like a human, making it suitable for any job.
  • By providing movable axes on the head and neck
  • , you can perform effects such as pulling in the chin or sticking out the face. The shoulder joints are designed with great care to ensure that the body lines do not collapse even in bold poses.
  • The movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses.
  • Compared to the separately sold "30MF Rozan Knight," the "Silhouette" [body] has a more solid form.
  • Armor and weapon parts are included to combine with the "Silhouette" [body] to "change jobs" to the "Rozan Fighter."
  • Flexible movement is achieved by using a mechanism that allows the shoulder and waist armor to be attached via the joint on the back.
  • The "Axe" and "Round Shield" can be mounted on the back or waist using joint parts.
  • The attribute of the "Element Core" is "earth".
  • The face design and coloring are different from the Liber Republic's "Silhouette" and "Fighter" (sold separately).

[Accessories]
  • Axe x 1
  • Round shield x 1
  • Armor parts x 1 set
  • Hand parts x 1 set
  • Joint parts x 1 set












RM84.00
RM84.00 Request Stock
Quick View
img
SAVERM12.50

30MF Minutes Fantasy Class Up Armor (Rose Warrior)

  • From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Class Up Armor (Lozana Warrior)"!
  • A set of armor and weapons that can be "classed up" to a higher-level job by "Armor Cross" [armor replacement].
  • By combining it with the separately sold "30MF Lozana Fighter," it is possible to "class up" to "Lozana Warrior."
  • A "Warrior" is a job for professional fighters with high combat skills and a powerful physique.
  • A different face design and coloring from the Liber Republic's "Warrior" sold separately.

[Accessories]
  • 1 set of armor parts
  • 1 set of weapon parts

RM29.40
RM29.40 Request Stock
Quick View
img
SAVERM9.90

30MF Minutes Fantasy Class Up Armor (Rozan Viking)

  • From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Class Up Armor (Lozani Viking)"!
  • A set of armor and weapons that can be "classed up" to a higher-level job by "Armor Cross" [armor replacement].
  • By combining it with the separately sold "30MF Lozani Fighter," it is possible to "class up" to "Lozani Viking."
  • "Viking" is a job that has combat abilities higher than Fighter and excels in a rough fighting style.
  • A different face design and coloring from the Liber Republic's "Viking" sold separately.

[Accessories]
  • 1 set of armor parts
  • 1 set of weapon parts

RM32.00
RM32.00 Request Stock
Quick View
img
SAVERM147.30

GODZILLA (2024) plastic Model Kit from Movie Godzilla x Kong: The New Empire

  • Godzilla in a dynamic pose is recreated in 3D with a skeleton designed by Shinji Nishikawa and an exoskeleton reproduced from the movie! This display model has been designed with a detailed organic and high-density exoskeleton and skeletal structure.
  • You can choose between two display methods: "stored inside the body" or "side by side with the exoskeleton".
  • The distinctive skeletal parts are produced by Shinji Nishikawa, who has participated in almost all Godzilla movies in terms of monster and mecha design, as well as providing settings and direction plans. Expresses the dynamic undulations of the bones to match the pose. The realistic bone form is recreated in 3D with attention to detail in the structure.
  • Reproduces the natural undulations of the body from the tip of the face to the tip of the tail. The exoskeleton is designed to make the seams of the parts, which are unique to non-movable models, less noticeable.
  • The color coding of the mouth is reproduced by dividing the parts.
  • Clear parts are used for the joints of the dorsal fin.
  • Two types of support parts are included to support the large body.

[Accessories]
  • 2 types of dedicated supports

RM260.00
RM260.00 Request Stock
Quick View
img
SAVERM27.90

Pokemon Plastic Model Collection 55 Select Series Scizor (Plastic model)

  • "Scizor" is now available in the Pokemon Plastic Model Collection Select Series, which can be easily assembled without tools!
  • Three types of interchangeable arm parts with different angles are included.
  • The scissors can be opened and closed.
  • A move effect and a pedestal are included. Once you've built it, it's PokePla Action!

[Accessories]
  • 1 set of arm parts for posing (left and right)
  • 1 pedestal
  • 1 move effect
  • 1 sticker

RM56.00
RM56.00 Request Stock
Quick View
img
SAVERM397.50

GOING MERRY -ONE PIECE Anime 25th Anniversary Memorial Edition-

A special edition of the GOING MERRY releases to commemorate the 25th anniversary of the "One Piece" TV anime!

The GOING MERRY is now available from the CHOGOKIN series in this special version to celebrate the 25th anniversary of the "One Piece" TV anime! It is available in colors inspired by the anime. It comes with a sail decoraged with an illustration made for the 25th anniversary of the anime. The base can play a TV-sized version of the first Japanese TV theme, "We Are!" when switched on,and has newly modeled LUFFY mini-figure riding on the bow!

Content: 
  • Main body
  • A complete set of interchangeable parts for reproduction of wrecked condition
  • Interchangeable sail parts to commemorate the 25th anniversary of the anime
  • Klabautermann (with pedestal)
  • 3 mini-figures
  • Lifeboats (large and small)
  • Luffy mini-figure
  • Stand

RM1100.00
RM1100.00 Ask Availability
Quick View
img
SAVERM220.00

The False Songstress DX Chogokin VF-25F Tornado Messiah Valkyrie (Alto Saotome Machine Revival Ver.)

Macross Frontier: The False Songstress DX Chogokin VF-25F Tornado Messiah Valkyrie (Alto Saotome Machine Revival Ver.)

The VF-25F Tornado Parts Equipped from Macross Frontier: The False Songstress is here, showcasing an enhanced matte finish on both the main body and its Tornado parts. This finish adds a sophisticated texture, elevating the visual appeal and realism of the figure. The VF-25F, piloted by protagonist Alto Saotome, comes loaded with high-powered Tornado parts, offering an array of customizable display options to recreate thrilling aerial maneuvers and scenes from the anime. Perfect for fans of Macross Frontier, this detailed figure is a must-have for collectors.

Contents
- VF-25F Tornado Messiah Valkyrie figure
- 3 Pairs of interchangeable hands
- Gunpod
- Assault knife
- Pilot figure
- Tornado parts set
- Dedicated stand set

RM1580.00
RM1580.00 Request Stock
Quick View
img
SAVERM229.00

THE ROBOT SPIRITS <SIDE SUPER> VOLTES V


The legendary super robot is now back in action thanks to overwhelming love from the Philippines!

Voltes V, now brought to life in a live-action movie in the Philippines, and its dynamic movements as seen in the movie have been reproduced at THE ROBOT SPIRITS! The Sword of Heaven and Ultramagnetic Tops are included. Both arms can use the Voltes Bazooka with the included interchangeable parts.

RM370.00
RM370.00 Ask Availability
Quick View
img
SAVERM19.80

30MF Liber Priest

  • From "30 MINUTES FANTASY," where you can create your own fantasy job, comes the "Liber Priest"!
  • A starter set that includes the base "Silhouette" [body] as well as armor and weapon parts.
  • Includes a "Silhouette" [body] with the same form as the separately sold "30MF Liber Knight."
  • The "Silhouette" [body] is capable of flexible human-like actions and can be adapted to any job.
  • The movable axis on the head and neck allows you to perform moves such as pulling your chin in and sticking out your face.
  • The shoulder joints are designed with great care to ensure that the body lines do not collapse even in bold poses.
  • The movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses.
  • Armor and weapon parts are included to combine with the "Silhouette" [body] to "job change" to "Liber Priest. "
  • Flexible movement is achieved by attaching the shoulder and waist armor via the joint on the back.
  • The attribute of the "Element Core" is "water."
  • Face design and coloring different from the separately sold "Silhouette" and "Priest" of the Rozan Empire.

[Accessories]
  • Staff x 1
  • Armor parts x 1 set
  • Hand parts x 1 set
  • Joint parts x 1 set

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM81.60

Figure-rise Standard Umamusume: Pretty Derby Silence Suzuka

  • Silence Suzuka from Uma Musume Pretty Derby is now available as part of the Figure-rise Standard series!
  • The skirt can be divided into front and back parts to ensure a large range of motion. It can also accommodate spreading movements, and the figure can be run in a forward leaning position without breaking the silhouette.
  • Three types of facial parts with different expressions are included. The smiling eyes are reproduced with tampo printing. The other two types use water transfer decals.
  • By pursuing the structure on a part-by-part basis, a colorful competition suit can be created just by assembling it.
  • The head is effectively divided into parts. The color-coded ears, hair, headbands and accessories that can be given expressions are also expressed in detail.
  • The upper body can be bent to reproduce a dynamic running look. The tail can also be flexibly moved.
  • The horseshoes on the soles of the shoes are reproduced with stickers. By dividing the front and back of the shoes, the figure kicking the ground can be flexibly expressed.
  • Four types of hand parts with expressions are included, left and right.
  • A clear molded pedestal (Action Base 6) is included. The support can be connected to the back to hold the body in a running pose.

[Accessories]
  • Facial expression parts (tampo printing) x 1 type
  • Facial expression parts (water transfer decal) x 2 types
  • Hand parts x 1 set
  • Pedestal x 1 set
  • Water transfer decal x 1
  • Sticker x 1

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM49.80

30MS SIS-N00 Sourei [COLOR B]

  • A new sister, 30MS SIS-N00 Sourei [Color B] has been added to the 30 MINUTES SISTERS series!
  • The set includes a character body, three types of facial parts with tampo printing, and armor parts.
  • The face parts of Color B are tampo printed. You can enjoy changing the facial expression to match the pose from three types: normal, embarrassed, and screaming.
  • The hairstyle parts are divided into parts to express two different hair colors. The bangs can be expressed with or without horns by replacing the parts.
  • The teeth parts are divided and can be attached selectively.
  • Armor is attached to both shoulders and back, and the jaw part of the demon mask on the right shoulder is movable.
  • The flame effect that can be attached to the blade and feet is reproduced with clear parts.
  • The blade has two different surface finishes to express different textures. The tsuba part is removable.
  • 30 MINUTES SISTERS has a lineup of face parts/hairstyle parts/body parts for each part. You can create your own sister by combining it with separately sold parts.
  • Uses 3mm joints common to 30 MINUTES LABEL. 30 MINUTES MISSIONS parts can also be attached as options.

[Accessories]
  • Face parts (tampo printing) x 3
  • Armor parts x 1 set
  • Sword x 1
  • Clear effect parts x 1 set
  • Joint parts x 1 set
  • Front hair parts (without horns) x 1
  • Hand parts x 1 set

RM100.00
RM100.00 Request Stock
Quick View
img
SAVERM19.80

30MF ROSAN PRIEST

  • From 30 MINUTES FANTASY, where you can create your own fantasy job, comes the Rozan Priest!
  • A starter set that includes the base Silhouette [body] as well as armor and weapon parts.
  • Includes a Silhouette [body] with the same form as the separately sold 30MF Rozan Knight.
  • The Silhouette [body] is capable of flexible human-like actions and
  • can be adapted to any job. The movable axis on the head and neck allows you to perform effects such as pulling your chin in and sticking out your face.
  • The shoulder joints are designed with great care to ensure that the body lines do not collapse even in bold poses.
  • The movable axes on the chest, torso, and waist work together with the sliding mechanism at the base of the waist joint to achieve natural poses.
  • Armor and weapon parts are included to combine with the Silhouette [body] to change jobs to Rozan Priest.
  • Flexible movement is achieved by attaching the shoulder and waist armor via the joint on the back.
  • The attribute of the Element Core is fire.
  • The face design and coloring are different from the separately sold Silhouette and Priest of the Liber Republic.

[Accessories]
  • 1 x Staff
  • 1 x Armor Parts
  • 1 x Hand Parts
  • 1 x Joint Parts

RM100.00
RM100.00 Request Stock

Showing 1921 - 1950 of 1980 products