• Home
  • Showing Modelling Tools product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Modelling Tools product(s)

Showing 121 - 150 of 1491 products

Quick View
img
SAVERM13.30

Tamiya Color Enamel Paint X-04 Blue (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: X-4
Color: Blue
Quantity: 10ml

RM10.60
RM10.60 Add to cart
Quick View
img
SAVERM13.38

Tamiya Color Enamel Paint X-05 Green (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: X-5
Color: Green
Quantity: 10ml

RM10.60
RM10.60 Add to cart
Quick View
img
SAVERM13.38

Tamiya Color Enamel Paint X-09 Brown (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: X-9
Color: Brown
Quantity: 10ml

RM10.60
RM10.60 Add to cart
Quick View
img
SAVERM22.97

Tamiya Panel Line Accent Color - Gray

Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM21.90

MODO Phantom Green MK-38 20ML

  • contains 20ML of lacquer paint
  • color: phantom green MK-38
  • apply a dark black/gray surfacer such as MK-11 / MK-12 as first layer before applying the phantom paint.
  • after the surface is smooth u may mixed with MODO retarder max + any phantom series paint to make the surface gloss & shinny.

RM38.00
RM38.00 Add to cart
Quick View
img
SAVERM9.97

MODO Phantom Red MK-35 20ML

  • apply a dark black/gray surfacer such as MK-11 / MK-12 as first layer before applying the phantom paint.
  • after the surface is smooth u may mixed with MODO retarder max + any phantom series paint to make the surface gloss & shinny.
  • contains 20ML gloss phantom red lacquer paint.

RM38.00
RM38.00 Add to cart
Quick View
img
SAVERM11.90

[Manwah] Manual Hand Drill tool (0.9 - 1.5mm)

Features:

  • Made of Aluminium Alloy material,durable and solid, easy to use.
  • Precise, accurate and efficient.
  • Suitable for wood, plastic,rubber,model and others material to drilling hole.
  • Do not fit steel, iron, stone, such hard things.
  • Ideal for drilling wood,horn,amber,olive, walnut, plastic and other materials.

Package Included :
  • 7 types of drill head.
  • 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5mm

RM30.00
RM30.00 Add to cart
Quick View
img
SAVERM15.50

MODO PM-10 PROMIX 10 - Ancient Gold 20ML

  • contains 20ML
  • Limited special edition color
  • MODO PM-10 PROMIX 10 - Ancient Gold 20ML

RM24.40
RM24.40 Add to cart
Quick View
img
SAVERM11.58

MODO PM-03 PROMIX 3 - Blood Red 20ML

  • contains 20ML
  • Limited special edition color
  • MODO PM-03 PROMIX 3 - Blood Red 20ML

RM24.40
RM24.40 Add to cart
Quick View
img
SAVERM14.48

Tamiya Color Enamel Paint X-14 Sky Blue (10ML)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: X-14
Color: Sky Blue
Quantity: 10ml

RM9.50
RM9.50 Add to cart
Quick View
img
SAVERM11.97

[Manwah] Manual Precision Hand Drill tool (1.8 - 3.0mm)

Features:

  • Made of Aluminium Alloy material,durable and solid, easy to use.
  • Precise, accurate and efficient.
  • Suitable for wood, plastic,rubber,model and others material to drilling hole.
  • Do not fit steel, iron, stone, such hard things.
  • Ideal for drilling wood,horn,amber,olive, walnut, plastic and other materials.

Package Included :
  • Manual Hand Drill tool (1.8 - 3.0mm)
  • 7 types of drill head. e.g. 1.8mm, 2.0mm, 2.2mm, 2.4mm, 2.6mm, 2.8mm, 3.0mm

RM30.00
RM30.00 Add to cart
Quick View
img
SAVERM11.10

Tamiya Weathering Pastel (Sand, Light Sand, Mud) Set A

  • Sand (for dusty finish)
  • Light Sand (for dusty finish on light-colored vehicles)
  • Mud (for mud on tank treads and rally cars) 

RM38.80
RM38.80 Add to cart
Quick View
img
SAVERM10.00

Tamiya Diorama Texture Paint - Grit Effect Light Sand

  • This water-based grit effect paint is useful for recreating sandy surfaces. The inspiration for this paint's color is the deserts of Iraq and Afghanistan. The grit effect paint has colored ceramic particles for recreating sandy surfaces.
  • Contains enough paint to cover B4-sized area (2.5 coats).
  • Drying time: 4-5 hours.
  • 1 bottle contains 250ml.

RM89.00
RM89.00 Add to cart
Quick View
img
SAVERM10.40

Tamiya Color Acrylic Paint Mini X-08 (Lemon Yellow) (10ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Mini Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-8
Color: Lemon Yellow
Volume: 10ml

RM9.50
RM9.50 Add to cart
Quick View
img
SAVERM15.90

Tamiya Color Acrylic Paint X-31 (Titanium Gold) (23ml)

Tamiya Acrylic Paints are made from water soluble resins that are excellent for either brush or spray painting. They have excellent coverage and can be used on resin, styrofoam, wood, fiberglass and all common model plastics. The paint flows smoothly with no blushing or fading and colors can be blended very easily to achieve that realistic finish to bring your scale model to life.

Each bottle of Tamiya Acrylic Paints contains 10ml and there is a wide range of gloss, flat and translucent colors. There is also an exclusive thinner and flat base which when added to one of the gloss colors will turn it into a satin or flat finish depending on how much you use.

Specs:
Color Code: X-31
Color: Titanium Gold
Volume: 23ml

Tips:
- When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.
- X designated colors have a glossy finish while XF designated colors are flat finish.
- The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
- The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer - Thinner will yield faster drying results and a harder finish.
- For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM152.00

GH-SPN-120 God Hand Ultimate Nipper Cutter 5.0 (Single-Edge)

Ultimate!!!Ultimate!!!!Ultimate!!!& Ultimate!!!!!!


As means, as the last point of reaching ultra-thin blade of a dedicated plastic nippers Plastic
This is the Ultimate Nipper. The highest rank of grade five sharpness.

- Sharpness is really good, characterized by breaks in the light force!
The reason for this is because the blade does not have only one.
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
Was not the case and say good or better sharpness both in the blade is in the same blade angle.
Nipper Ultimate 5.0 is cut with a knife and chopping board image.

Notes:
  • Ultimate 5.0 features and special nippers Plastic
  • With stopper to prevent the folding blade ,Added new feature
  • That put the stopper, and the blade edge is now not hit more than necessary.
  • A result, the break is eliminated concerned than ever before, you can use normally.
  • So good taste will be lost and disconnected when folding the parts to lose!
  • Can cut the parts for light and fatigue in the hand is hard work for a long time!
  • When the gate since it is less burr cut, reducing the processing time the gate!
Specifications
- single edged knife
Do not have a blade on the left side as seen from the (surface) plane are not laser engraved.
Left blade is playing a role to suppress the thing off. Then, sputtering in the blade and cut right.
By the presence of suppressed, transmitted to the blade to cut straight without relief force.
The image of the cutting board and cut with a knife.
- Proven durability of the sharpness! !
There also consider the durability of our customers to focus on next sharpness degradation of sharpness.
Even after a test cut of the plastic stick of ?3mm of 10,000 made in our
Sharpness did not decline than other products!
The secret is because state-of-the-art technology to tool sharpening of our own.
- Will a hole in the blade and the cutting of iron wire. Please do not cut into the absolute.

- Product specification:
  • Length: 122mm
  • Weight: 60g
  • Blade length: 9mm about
  • The length of the grip: 83mm
------Coil spring spring
Light blue color of the grip-----
(To prevent out-of-function opens and spring too) with a stopper to prevent too open.
If you do not need the stopper, please remove the pin with pliers, etc.
-With the clash of blade protection
Part of the blade with a simple cap-
  • This product is the packaging blister pack
Simple explanation-papers
Made in Japan **MADE IN JAPAN

##One point advice on maintenance
  • Please give on a regular basis to oil the moving parts, such as sewing machine oil or KURE5-56.
Lubricating oil will be, it might be difficult to play.
  • After use, please I wiped clean from the blade. Can cause rust.

RM298.00
RM298.00 Add to cart
Quick View
img
SAVERM7.80

Basic Fine File Set 5 in 1

  • (Lian Bang Craft Tools) Basic File Set 
  • Comes with 5 Variety of files
  • Files type:

  • 1) Pivot file
  • 2) Equaling file
  • 3) Triangle file
  • 4) Square file 
  • 5) Round file

RM12.10
RM12.10 Add to cart
Quick View
img
SAVERM10.90

Mr Hobby Mr. Masking SOL R [M133]

  • [Mr.Hobby] Mr. Masking SOL R
  • "MASKING SOL", which can be applied, cut and peeled off. This is product has the same characteristics as M131, which is no longer manufactured.　
  • This is a water-soluble product, so when it thickens during usage, you can thin it out with tap water for extended use.
  • Apply MASKING SOL where you need it evenly with a brush.
  • After it dries within 20~30min., it becomes translucent film.
  • Cut unnecessary parts away neatly with a design knife, etc. leaving masked parts, and then apply paint.
  • When the paint has dried completely after painting, peel off MASKING SOL.
  • MASKING SOL is water soluble, so wash out brushes with water.

RM19.00
RM19.00 Add to cart
Quick View
img
SAVERM10.00

MGM - Mr.Flatness (BIG)

- MGM - Mr.Flatness (BIG)
- Acrylic board sanding tools, which help to sand flat surface. No glue required, just hold the sandpaper with fingers.
- Recommend to cut the sandpaper in 3cm X 8cm for easy gripping and handling.

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM3.10

GMS109 Gundam Marker Gundam Seed Basic Set

A pack of 6 easy to use paint markers that come in a variety of colors for use on Gundam models and other plastic model kits featuring colors used in Gundam Seed.

Red, Yellow, White, Blue, Gray, Dark Blue



RM79.80
RM79.80 Add to cart
Quick View
img
SAVERM10.90

MODO MX-09 - Copper (20ml)

  • contains 20ml
  • metal color
  • MODO COOPER MX-09 20ML
  • mixed together with lacquer thinner for model kit painting.

RM19.00
RM19.00 Add to cart
Quick View
img
SAVERM24.50

Mr Hobby Mr Color Thinner (400 ML) [Acrylic & Lacquer]

[Mr.Hobby] Mr.Color Thinner 400ml



Mr Color Thinner

4 volume for selection
* 50 ml
* 110 ml
* 250 ml
* 400 ml

- Suitable for Acrylic & Lacquer based paints
- Mr.Color Thinner can be used for dilution and cleaning

Mr. Color Thinner is a multiple use material and is a must-have for anyone who wants to try their hand at painting. It is a necessary component to thin out paints can also be used during airbrushing for thinning and cleanup paints.

RM45.40
RM45.40 Add to cart
Quick View
img
SAVERM3.10

Sanding Box / Polishing Box

Sanding Box / Polishing Box

  • Green Section is for sanding
  • White Section is for polishing

RM1.90
RM1.90 Add to cart
Quick View
img
SAVERM4.40

Model Kit Painting Masking Tapes 24 mm

SNDME Masking Tapes 24 mm width x 18m long x 1

RM7.60
RM7.60 Add to cart
Quick View
img
SAVERM3.40

Model Kit Painting Masking Tapes 18 mm

SNDME Masking Tapes 18 mm width x 18m long x 1

RM6.60
RM6.60 Add to cart
Quick View
img
SAVERM5.00

Model Kit Painting Masking Tapes 12mm

SNDME Masking Tapes 12mm width x 18m long x 1

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM3.99

MODO Clear Orange M-042 18ML

  • contains 20ml
  • clear color
  • MODO Clear Red M-042 20ML
  • mixed together with lacquer thinner for model kit painting.

RM14.00
RM14.00 Add to cart
Quick View
img
SAVERM5.60

[MANWAH] Scribing Masking Tape (6mm x 3m)

Scribing Masking Tape (6mm x 3m)
  • 3 meters long, 6mm wide
  • thick and blue color so you can see the tape clearly instead of using transparent tape

RM9.40
RM9.40 Add to cart
Quick View
img
SAVERM1.80

Plastic Dropper for Modeling Paint 3ml x 4 units

Eye Dropper for Modeling Paint 30ml x 4 units


Material : Plastic
Usage : Use it to get thinner to mix with paints

RM1.20
RM1.20 Add to cart
Quick View
img
SAVERM9.30

Tamiya Color Enamel Paint X-34 Metallic Brown (10ml)

Tamiya Enamel Paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic. 


Each bottle contains 10ml of paint, and when spray painting enamels, best results are achieved by adding 2 parts of thinner to 10 parts of paint.

Recommend Thinner : Tamiya Enamel Paint X-20 

Specs:
Type : Enamel (Water Base) 
Color Code: X-34
Color: Metallic Brown
Quantity: 10ml

RM10.60
RM10.60 Add to cart

Showing 121 - 150 of 1491 products