Fantastic high-grade kit of the mech from the new hit series 'Gundam Seed'. Beautiful detail on all parts; nicely poseable thanks to several polycaps at the joints. Molded in colored plastic. Like most modern Bandai kits assembly is snap-fit (no cement required); instructions are in Japanese but clearly illustrated. Stickers for some detail are included; paint might make the final product look more 'realistic', but isn't necessary.

Beautiful 1/100 scale injection plastic kit of 'Freedom Gundam', from the hot new series 'Gundam Seed'. Superb tooling from Bandai ensures quality and detail, and their multi-gate technology allows several colors to be blown on a single runner, which reduces the number of necessary runners. The completed kit is highly poseable thanks to plenty of polycaps in the joints; the 'wings' open and close, and the plasma rifles fold up and over the mech's shoulders to be used in combat. Included is an unpainted plastic figure of Lacus Clyne, standing prettily and holding Haro in her hands.

• Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  
• Uses the XXX-G Frame developed during the animation!
  
• Marking work is designed by Hajime Katoki.
  
• Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  
• New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  
• Able to reproduce the flapping from the animation naturally. 
  
• The closed state of the Active Cloak can also be reproduced with a natural form. 
  
• Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 
  

MS-09 Dom (MG)

• EXTREME VS. Major Model appeared in the original MS Ekusutorimugandamu!
• Discovery of a new action by the militants pose a motif instrument.
• The four parts are included wrist, expand the range of expression.
• The guitar can be stored in the shield-type rifle.
• Reproduced in blue light-emitting clear parts.
• Accessories: beam rifle, beam saber, shield
  

- HGUC Unicorn, appeared in a titanium finish strong, solid design! 

- Accessories: Shutsurumu Faust, beam machine gun, hand grenades, Hawk beam Shield for rifle grip (right), for the saber grip (left), Hirate (left)

- HGUC Shinanju, appeared in a titanium finish strong, solid design! 

• The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  
• Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  
• GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  
• Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  
• Includes custom marking seals and Gundam Decals.
  
• Includes GN Code decal sheet.
  
• GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  
• stand included to hold the Drive while it's not with the Exia.
  
• Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  
• GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

• "V operation" Gundam reinforced equipment for Gundam Ver.2.0 "G fighter" appears in a full spec. 
  
• The power reactor and the missile launcher unit of a new design are involved to B mechanism. 
  
• Gundam can become independent with stability according to the step of the tiptoe and the heel. 
  
• The caterpillar gives priority to the forming reproduction made of Pra, and reproduces various forms. 
  
• Accessories: 1 and shield × hyper hammer × one two kind of attachment for action base Landing gear ×1 expression and one Kiza ×1 and 1 and mass standing × row standing × two kinds of maintenance staff
  

• Mechanism of Zion threat. 
  
• The development story connected from mass production Zac to Gelgg is reproduced with the MG kit.
  
• Zac MS-06R of "Singh Matsnaga" specification of high mobile type Zac is made a kit by using the basic structure of Zac Ver.2.0 of the inner frame enhancement reproduction. The detail shape such as the leg, the shoulder, the shoulder armors, and forearms changes from MS-06R. 
  
• The Zac machine-gun, the Zac bazooka, the cartridge magazine in addition to the heat fork, and parts for the experimental bazooka modification are attached.
  

• Designed on the basic inner structure of the Zaku II Ver. 2.0, legendary Zeon ace pilot Johnny Ridden's custom Zaku II is added to the Zeon Master Grade lineup! 
  
• Features redesigned thruster housing and shoulder armor inspired by the Zaku II 06R.
• -  Monoeye -   camera movement gimmick allows for eye position to be changed.
• Separable spike elements set this kit apart from your standard Zaku. 
• Thanks to the updated power pipe assembly system, the once tedious process has been streamlined by using pre-positioned runners. 
• Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
• Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Giant Bazooka x1, 1/100 Pilot Figure x2, Action Base Joint x1

• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

MG Freedom Gundam (Extra-Finish Edition)

• The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
• Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

• MG RGM-79(G) GM Ground Type
  

• MG FA-010S Full Armor ZZ Gundam
  

• MG RX-78-2 Gundam (Ver.1.5)
  
• This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  
• Upgrade product of the master's first grade! !
  

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam
  

- Accessory: Large-scale GN beam saber ×2 that GN buster, large-scale rifle, GN [finfangu] × 4 (Canon Inc. ordnance at the Canon Inc. mode), and is shielded.

- Accessory: 2, saber × [bi-muchakuramu], flat part of the hand (Only the right hand :), and the BA-1 type.

- Accessory: GN bazooka II and GN beam saber × 2 (one brevi 1 in length)

- Includes: Beam Saber x2 (long/short), Beam Chakram x1, Open hands with expression (left/right) x1, Closed Fist (right), BA-1 type base x1