Price Clear







Showing Gundam Model Kits + HIGH GRADE (HG) 1/144 product(s)

Showing 1 - 30 of 1106 products

img
SAVERM91.90

HGUC 1/144 RX-93 Nu Gundam (Metallic Coating Ver.)

  • Metallic coating Ver with feeling of luxury and weight feeling . 
  • New hyper bazooka that 6, fin funnel × beam rifle, and 2 and beam saber × is shielded. 10 molded piece × foil seal, and marking seal.
When Bandai finally offered the RX-93 Nu Gundam as an HGUC kit, it wowed people with its superb quality. Now this sharply detailed kit is back, this time in a Metallic Coating Version! Amuro Ray's last piloted Mobile Suit in "Char's Counterattack" features polycap-jointed articulation and is fully equipped with two types of beam sabers, a beam rifle, a new hyper bazooka, and of course its distinctive fin funnels, which are detachable from its back and can be set in firing mode. Stickers are provided to add detail to the completed model.

RM208.00
RM208.00 Add to cart
img
SAVERM35.93

[100] HGUC 1/144 Unicorn Gundam (Destroy Mode)

  • Unicorn Gundam Destroy mode and Unicorn mode are both released at the same time! Unicorn Gundam Destroy mode is No.100 of HGUC 
  • By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. 
  • Psycho frame is formed with transparent material, for an emphasis on transformation. 
  • Use of new type polycap allows increased posing range. 
  • Has mobility that's as good as MG, even though it is HGUC 1/144! 
  • Includes: Shield (Open state) x1, Beam Saber (no beam) x2, Beam Magnum x1

RM72.00
img
SAVERM47.90

[116] HGUC 1/144 MSN-06S Sinanju

  • Bearing resemblance to the -  'Red Comet', the rival machine with great impact,
  •   Sinanju has arrived in HG!
  • The reproduction of mechanism settings for the HG series has been greatly pursued.
  • The characteristic thruster parts have been given mobility. The thrusters of the legs
  •   are given independent mobility.
  • The impressionable backpack can be opened and closed. This will add more variety to
  •   the posing expressions.
  • The complicated engravings had been reproduced too. The engravings have been
  •   reproduced by the use of foil sheets.
  • By the utilization of part structure that stops the parts joints to standing out too much,
  •   the level of completion has been improved.
  • Also includes a set of closed fist (left and right).
  • The great variety of weaponry allows you to recreate many of the scenes from the
  •   original animation!
  • The attachment/detachment gimmick of the grenade part on the Beam Rifle
  •   had been reproduced.
  • The Grenade, Beam A-xe (Storage Mode), and Beam A-xe (Expanded Mode) can be
  •   attached to the back of the shield.
  • Beam A-xe can be combined to become the Beam Naginata.
  • Accessories: Beam Saber x2, Beam Rifle, Shield, Beam A-xe (Expanded Mode) x2,
  •   Beam A-xe (Storage Mode) x2

RM108.00
RM108.00 Add to cart
img
SAVERM55.90

[085] HGUC 1/144 RGZ-91 Re-GZ

  • Re-GZ appeared from [Mobile Suit Gundam: Char's Counterattack.
  • Reproduce the mechanism of deformation to form by the Fighter Space (Back Weapon System) BWS.
  • The deformation mechanism is adopted as part replacement formula, pursue the ease of play of transformation gimmick.
  • Pursuing the proportion seems to form space fighter aircraft by reducing the thickness of the fuselage.
  • To adopt a gimmick stretch the legs. Precise details of the internal mechanism, such as vernier Apojimota
  • Reproduction.
  • Comes the action-based connection unit for the display of a single BWS
  • (Action Base 2 is not included).
  • Weapons - Accessories: beam rifle, shield, beam saber

RM112.00
RM112.00 Add to cart
img
SAVERM131.90

HGUC 1/144 Sazabi (Metallic Coating Ver.)

Accessories: 6, funnel × beam shot rifle, 2, beam saber × beam Tomahawk, and shield

RM198.00
RM198.00 Add to cart
img
SAVERM75.90

[099] HGUC 1/144 NZ-666 Kshatriya

A large mobile suit that features invidually deployable funnels. Massive wing binders are individually articulated and have their own locking tabs for weight balance. Approximately the size of 1/100 kits.


Accessories: 
- funnel × 6 (separation)
- beam saber (grip independent) × 2

RM172.00
RM172.00 Add to cart
img
SAVERM52.90

[093] HGUC 1/144 FA-93 Nu Gundam HWS

The Nu Gundam Heavy Weapons System, from the CCA-MSV series of alternate versions of Mobile Suits from the film 'Mobile Suit Gundam: Char's Counterattack', joins the HGUC lineup. Heavy Weapons System includes: additional armor for the Nu Gundam (chest, front and rear skirts, and large leg thruster units), a Hyper Mega Rifle, and a large shield with rocket launchers. Missile pod units on the chest armor pivot up and down. Fin Funnel unit can be disassembled into individual folding plates. Heavy Weapon System can be removed for display as a standard Nu Gundam. It includes Hyper Mega Rifle, large shield, beam rifle, Hyper Bazooka, normal shield, 2 beam sabers, and 6 Fin-Funnel plates.


According to wikipedia
The FA-93HWS ν Gundam Heavy Weapons System Type is a mobile suit featured in the original design series Char's Counterattack: Mobile Suit Variations.

Anaheim Electronics planned to improve the newtype use RX-93 ν Gundam by equipping it with the F.S.W.S (Full-armor System and Weapon System), which included removable chobham armor to increase its protection and includes two shoulder missile pods that flank either side of the head. The ν Gundam's shield also replaced by a larger shield with built-in thrusters, to counter the Heavy Weapon System's increased mass. The heavy beam rifle also increased the firepower of ν Gundam. However, the Heavy Weapon System plan was never completed due to ν Gundam's rushed deployment and eventual MIA status. It should be noted that the missile launcher components of the Full Armor are improved versions of the ZZ Gundam's missile launchers.

Weapons: 
  • 60mm Vulcan gun
  • Beam saber
  • Large beam saber
  • Beam rifle
  • Hyper bazooka
  • Hyper Mega Rifle - A beam rifle said to possess a power rating high enough to destroy anything at maximum output, it is the most powerful beam-type weapon of the suit. This weapon also supported ultra-long-range sniping and featured a bipod for precision firing. A sensor built into the rifle adjusts the power output according to the target's distance, and could be manually controlled via the mobile suit's psycoframe system. Its power output rivaled that of the main cannons of UC battleships. To improve accuracy, it was partly controlled by newtype psycommu waves.
  • High Mega Shield (Armor) - A variation of the RX-93's shield, it is thicker for solid-weapon endurance and can equip a ballistic missile launcher that detonates with enough destructive power to erase a number of suits when it makes contact with any surface. Due to its slow movement speed it is preferable to use it at point-blank range to inflict enormous damage without missing the target. Other than that, the shield has two fixed beam cannons, with power output rivaling that of the ZZ Gundam's High Mega Cannon.
  • Beam cannon
  • Missle launcher
  • Small missle
  • Shoulder Missile Launchers - An improved version of the multi use launchers that were widely used in the Gryps Conflict, the Missile Launchers mounted on the shoulders of the H.W.S. can use a wide variety of munitions, which included the Psycommu Grenade. Apparently, it is linked to the later development of a weapon called the "Funnel Missile".
  • Fin Funnels - Considered one of the most deadly weapons in UC history, the funnels were individual remote weapons that could fly off and attack from receiving the psycommu waves of the pilot. Fin funnels were funnels equipped with their own generator, which greatly increased their capabilities. They needed less frequent charging, and were able to generate a fin funnel barrier, a defensive field, around friendly units.

RM115.00
RM115.00 Add to cart
img
SAVERM29.90

[070] HGUC 1/144 MS-14S Gelgoog Char Custom

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

RM60.00
img
SAVERM49.90

[081] HGUC 1/144 MSM-10 Zock

The amphibious green mobile suit from "Mobile Suit Gundam" has arrived in Bandai's HGUC series! This snap-fit-assembly kit comes molded in color and features articulated joints, plus impressive inner mechanical detailing for its head and chest areas. Its multi-directional mono eye is movable through its rails underneath the armor.

RM100.00
RM100.00 Add to cart
img
SAVERM27.90

[014] HGUC 1/144 AMX-011 Zaku III

A great kit of this rather busy-looking variation on the Zaku. Includes beam rifle, beam cannon, heel claws, backpack and shoulder armor. Snap assembly. Molded in final colors. Very reasonable price considering the number of parts.

RM62.00
img
SAVERM23.90
RM48.00
img
SAVERM35.90

[134] HGUC 1/144 Unicorn Gundam 02 Banshee (Destroy Mode)

  • The second Unicorn Gundam "Banshee" from "Mobile Suit Gundam Unicorn" episode 4 joins the HGUC lineup. 
  • The new armaments seen in the episode 4 are included. 
  • The psycho frames can be seen through the armor.

RM72.00
img
SAVERM25.90

[131] HG 1/144 RMS-179 GM II

  • RMS-179 Gym II, appeared in a refined form awaited!
  • 構Eta also determines the fore grip in his posing!
  • Or a successor to Jim II HGUC Jim was introduced to the Battle Guripusu
  • Shield, rifle, saber, and offers options such as hand parts and parts!
  • Accessories: beam saber, shield, beam rifle, for the rifle grip (right),
  • For Saber grip (left)

RM58.00
img
SAVERM28.90

[139] HG 1/144 Juaggu (Unicorn Ver.)

- ジュアッグ, HGUC-izing of a shock! The time of 刻 for 30 years is exceeded, and it is full renewal!! - Reappear in the figure in which it appeared by episode4. - The canon of nose and an arm is flexibly movable. - Chest mechanical reappearance. - Pausing is also free. - MSM-04G JUAGGU (ジュアッグ) -- It was developed for jab low capture games at the time of "one-year war." Special work MS. U. In C.0096, the brave figure was shown as one corner of the attack party to federal capital Dakar. - Accessories : 3 cannons-equipped-at-a-battery canon (right and left) Item Size : 31 x 19 x 7.5 cm

RM72.00
img
SAVERM27.90

[140] HGUC 1/144 MSA-003 Nemo (Unicorn Ver.)

- An update of a classic design, Mobile Suit Gundam Unicorn`s Nemo joins the HGUC line!

- Rear waist features a dual beam saber mount.
- Features high-powered backpack thrusters.
- Includes optional hand parts and full arsenal.
- The EFF`s classic mass-produced Nemo Suit is still in use years after its time as a frontline Suit. Fielded at Torrington Base in UC 0096 to combat the rising Neo Zeon threat, this Suit still holds up 9 years after its use in the Gryps conflict.

- Accessories : GM Rifle, Shield, Beam Saber x2, Fist (Left, Right), Open Palm (Left, Right), Grip Manipulator (Left, Right), Rifle Manipulator (Right)

RM62.00
img
SAVERM17.90

[068] HG 1/144 MS-05 Zaku I The Black Tri-Star

MS-05 Zaku I The Black Tri-Star (HGUC)

RM42.00
img
SAVERM17.90

[064] HGUC 1/144 MS-05B Zaku I

  • Reproducible shoulder tackle.
  • Bazooka armed rack, Zakubazuka, Zaku machine gun, shield, Shutsurumu file
  • Usuto supplied, the Heat Hawk. Zakubazuka can be attached to the rear armor.
  • Mono movable by moving the lever on the back of the head.
  • The pursuit of the detail comes with a wrist.
  • The double elbow joints, expanding the range of movement

RM42.00
img
SAVERM25.90

[R16] HG 1/144 M1 Astray

  • M1 Astray, Orb Union's mass production MS, from (Mobile Suit Gundam SEED)

  • Various weapons and optional parts are included.

  • The beam part of the beam sabers are made of transparent plastic.

  • Includes antiship swords, exclusively for Gunpla.

  • Comes with 8 runners, foil sticker, marking sticker, and japanese instruction manual.

  • Accessories: beam rifle, shield, beam saber x 2, x 2 anti-ship sword, For the saber grip (left and right), fist (left), for the rifle grip (right)

RM58.00
img
SAVERM41.90

[083] HGUC 1/144 MSN-03 Jagd Doga (Gunneys Guss Use)

  • Comes with a funnel effect in part, to reproduce conditions in space injection funnel. 
  • Detachable funnel in standby state, expanded state, a reproduction of a replacement. 
  • Mono moving head from side to side. Shoulder swing mechanism is adopted. 
  • Vernier Apojimota, give accurate details of the internal mechanism and so on. 
  • Supplied weapons, beam rifle, shield, and saber.

RM90.00
img
SAVERM17.90

[144] HGUC 1/144 Base Jabber Gundam

- HGUC commercialized in the base-Jabbar of the big success in aerial combat of [Black Unicorn] episode 5! - Expansion and contraction of the foot corresponding to the various MS Panel! - In an action-based support, reproduce powerful battle scenes! Use the included landing gear (It is also possible to get to the ground. ) - Sub-flight system for the operation of the base-Jabbar in the air ... MS (SFS). Jet heat kernel With a function-propelled hovercraft. Geta `alias`. - Accessories: Landing Gear (closed-open)According to wikipediaThe Base Jabber is a single MS Carrier/Flight System that first appears in the anime series Mobile Suit Zeta Gundam. It is designed to have a Mobile Suit stand on top of it as it flies. Using this sub flight system, mobile suits which have extremely sloppy movement speed under gravity, can improve its mobility, while gaining limited flight capability, and hence able to accomplish operations swiftly and solidly.Weapons- Mega Particle Canon: The forward section of the carrier has a Mega Particle cannon which is mainly seen used for support during battle.

RM42.00
img
SAVERM26.90

[146] HGUC 1/144 RGM-79SP GM Sniper II

  • A long-range heavy hitter, the most powerful GM of the One Year War finally joins the HGUC lineup!
  • Visor can be opened and closed.
  • Rifle firing prose can be replicated.
  • Appearing in the fan favorite anime Mobile Suit Gundam 0080: War in the Pocket, the powerful GM Sniper. Designed off the bones of the GM 
  • Sniper Custom, this updated Suit features long distance sniping ability, powerful overall performance. Made for ace MS pilots, only a few 
  • were created before the war's end. 
  • Accessories: 90mm Bullpup Machine Gun, Sniper Rifle, Shield, Beam Saber x2, Manipulator x5

RM62.00
img
SAVERM51.90

[148] HGUC 1/144 Gundam Delta Kai

  • Accessories
  • Long Mega Buster, shield, high-Mega Cannon, proto fin funnel x 2, Beam saber x 2, saber grip (left and right), fist (left and right), rifle grip (right). 
 
According to wikipedia 
The MSN-001X Gundam Delta Kai (pronounced 'Kai') (aka ? Kai or ??) is a prototype transformable mobile suit developed from the MSN-001 Delta Gundam as a technology demonstrator. It appears in the PlayStation 3 video game Mobile Suit Gundam UC (The Postwar) and UC-MSV. In overall appearance, the Gundam Delta Kai is an enhanced version of the Delta Gundam, which incorporates new technologies that can be used for future mobile suits. It also has a specialized Psycommu system installed called the Nitro System, which grants an ordinary pilot Newtype abilities. The Gundam Delta Kai is also armed with standard vulcan guns, a long mega buster, two beam sabers and a shield. But also equipped with two fin funnels on its back.
 
Weapons 
  • Vulcan gun: The vulcan gun has been a standard armament of Federation suits since the One Year War. While not very powerful and typically unable to penetrate mobile suit armor, the vulcan gun is useful in intercepting missiles/rockets, destroying mobile suit sensors, and engaging lightly-armored targets such as tanks and small aircraft. 
  •  Long Mega Buster: A specialized Beam Rifle with a power output comparable to a beam cannon. It was developed from the RX-78-4 Gundam Unit 4 "G04"'s Long Beam Cannon. 
  • Beam Saber: The Delta Gundam Kai's close combat armaments. It is able to melt through most armor and destroy most mobile suits in one strike. 
  • Shield: The Delta Gundam Kai's defensive armament. It doubles as the unit's forward section in waverider mode. 
  • Fin Funnels: The Delta Kai mounts two Proto Fin Funnels on its back.

RM104.00
RM104.00 Add to cart
img
SAVERM23.90

[052] HGUC 1/144 RMS-108 Marasai Gundam

  • Item Size/Weight : 31 x 19 x 7 cm / 295g
  • Snap and fits conditions, comes with minor decals.
  • Normal mobility, but looks quite flexible and nice curve in the gundam modelling kits.
  • Weapons included are: beam saber x2 (yellow color), vulcan gun, and beam rifle.

RM60.00
img
SAVERM26.90

[150] HGUC 1/144 MSA-003 Nemo

- About one year after the launch of the modern Unicorn version, the classic E.F.F. Nemo joins the HGUC lineup in its original color scheme

from Mobile Suit Zeta Gundam!

- Accessories: Shield, Beam Rifle, Beam Saber

RM62.00
img
SAVERM21.90

[045] HGUC 1/144 MS-14J Gelgoog J Gundam (Gelgong Jager)

  • The MS-14Jg Gelgoog Jäger (????J???????) is a variant of the standard MS-14A Gelgoog. It appeared in the Mobile Suit Gundam 0080: War in the Pocket series.
  • An upgraded model of the Gelgoog under United Maintenance Plan, one of Zeon's attempts to simplify both construction and operation of their Mobile Suits. The MS-14Jg Gelgoog Jäger, or simply Gelgoog J, featured more powerful thrusters and additional verniers. To offset the increased propellant use, it also carried a pair of large external propellant tanks on the backpack. It was primarily armed with a large beam machine gun that boasted high accuracy (in fact, the Jäger was nicknamed the Gelgoog Sniper). Like other later model Zeon Mobile Suits, it was also capable of carrying other Zeon weaponry such as the powerful bazooka or MMP-80 machine-gun. With its high performance and powerful weaponry, it was more than a match for the Earth Federations GMs and other mass-production units.

RM50.00
img
SAVERM32.90

[057] HG 1/144 Gundam Astray Blue Frame Second L

1/144 model of Blue Frame's second form featuring a fully transformable Tactical Arm pack which can convert from giant sword to Gatling gun modes made for the 10th anniversary of the Gundam Seed Astray manga. Also includes 2 armor Schneider k-nives and hidden foot blades and stand to help with balancing the massive sword.

Accessories: 
- Armor Schneider x 2
- Tactical Arms
- Dedicated pedestal

RM68.00
img
SAVERM28.90

[003] HGUC 1/144 AMX-011 Zaku III Custom

HGUC 003 ZAKU III Custom


The AMX-011 Zaku III is a Mobile Suit developed by Neo Zeon as the successor to the Principality of Zeon’s MS-06 ZAKU II.

The AMX-011 Zaku III features a simplistic, versatile design with the ability to utilize optional equipment packs to serve various combat roles. Approximately 33% larger than its predecessor, it benefits from drastically improved power output and acceleration, showcasing the rapid advancements in Mobile Suit production discovered in the decade following the One Year War.

RM60.00
img
SAVERM10.90

[006] HGUC 1/144 MSM-07 ZGok Mass Production Type

[006] HGUC 1/144 MSM-07 ZGok Mass Production Type

RM30.00
img
SAVERM15.90

[008] HGUC 1/144 MSM-03 Gogg

An aquatic mobile suit used by Zeon from Mobile Suit Gundam with its trade mark sharp claws. Arms can detach to recreate appearance while cruising through the ocean waters.

RM32.00
High Grade (HG) are the most commonly built kits on this list. They are easy to build, their price point is affordable, and there is a wide variety of HG kits to choose from. These kits can easily be spotted by the HG moniker found on the corner of the front box art. These kits have more articulation than SD units, which gives it more options for poses. They are 1/144 scale make them the perfect size for collecting and displaying.

In our previous blog, we mentioned that HG kits is our recommended grade for beginners. This is because they offer a great experience without having to break the bank. As you progress and become a better builder, HG kits become fantastic test subject to practice weathering and painting techniques.

Showing 1 - 30 of 1106 products