• RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  
• New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  
• Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  
• Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  
• Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  
• Bring out the real attraction [of multi-colored armor.
  
• Launch of Kira Yamato, sitting figures included.
  
• Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)
  

• RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
• RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
• As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
• Zeta Gundam appeared -.
• The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
• Adopt a new joint MS Advanced mode.
• Comes with realistic decals.
• Accessories: beam rifle, shield, grenade x 2, beam saber x 2,
• Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

• RG 11 bullet will be Destiny Gundam protagonist machine [Mobile Suit Gundam SEED DESTINY]
• Finally here!
• Also made by the Freedom Gundam ZAFT, Gundam and Justice
• Destiny Gundam. Dropped into the [real] and its setting in this product,
• Are using the Advanced mode in common with MS MS joint above. However,
• At the same time to pursue your own settings to reproduce the Destiny Gundam, the exterior parts
• How to install or Ikashi are the ones that are different from the previous two products RG series of body
• Has become.
• Armored division fine considering the actual machine, unique feature of RG. Such as the joints,
• You can put a realistic decals, plans to reproduce the metal-like texture.
• Also boasts a wide range of range of movement in the air `` poses unique appearance ?? SEED
• Advanced mode can be reproduced by the joint MS.
• Long-range beam cannon weapon variety, such as a beam shield included.
• Also a characteristic wing, three-dimensional by actual investigation. Can be replicated gimmick wings and weapons deployment.
• Accessories: beam rifle, beam saber ? 2, beam shield, shield,
• Beam boomerang ? 2, beam sword, long-range beam cannon

• Line up the first series of RG from the Mobile Suit Gundam 00, Gundam Exia appearance!
  
  
• Is a real grade latest series, it's the 15th of his will, was on the stage of AD
  
  It is Gundam Exia that appeared in the Mobile Suit Gundam 00. In other words, Gundam Exia is present in the world of Jitsuzuki and [AD] the world we live, on the extension of the current science, The aircraft is present. Different from the other Gundam, in the sense of the original in [the real world it is a mobile suit], it is also the concept of the real grade. We sees The go Himotoi from the latest science in the real world of science in 2300 that can not be, Gundam to cross over the present and future of [science] and future, present and [AD], It is so [RG GN-001 Gundam Exia].
  
  
• 1 Point: the pursuit of appearance and a movable mechanism realistic
  It has been omit was included in only Exia that specializes in dogfight, the Gundam of other,
  To the Advanced MS joint mobility configuration "for realizing the movable range similar to a human]
  Equipped. As a result, achieve a range of motion unparalleled among the RG series so far, and a human body basis
  I can enjoy the movement.
  
  
• 2 Point: detail of as a product of the real world of 00 was the stage for the future of the 2300's year of Jitsuzuki and the world we live. Of Exia There should be an extension of energy science is the current design features [GN Drive. The state-of-the-art technology for transmitting light energy to transfer the energy [GN code] Interpreted as material that has evolved from the plasma tube array], from the plasma tube array 
  Texture to the image, you have to pursue the details.
  
  
• GN Drive is removable.
  
  
• GN condenser realistic by the clear parts and decals. GN particle supply code
  
  
• Reproduced by the hologram PET.
  
  
• Ebi himself, who was in charge of the mechanic design of Gundam Exia is thorough supervision. A new Marking the design.
  
  
• Shield and sword comes, seven were derived from development code of the Seven Swords.
  
  
• Accessories: GN Sword, GN shield, GN beam saber x 2, GN beam dagger x 2, GN Short Blade, GN Long Blade

• "Wing Gundam Zero EW" as Real Grade featuring detail is reproduced through the utilization of actual techniques, an investigation of the settings, and a new interpretation of the properties of the machine. 
  
• The structure of the main wing is based on material technologies used in real aircraft. 
  
• Considering the heat-resistance and machine protection during atmosphere entry, the armored structure for the interior of the wings is designed using a pinnate mold. 
  
• The main wing section utilizes cutting-edge aircraft and combat aircraft technology and is designed to have a movable structure. Closely resembling a bird's wings, each section of the curved "flexible wings" is capable of moving in 3-dimensions. 
  
• The "Zero Frame", which can move by itself, is designed through consideration of the internal structure of the latest autonomous robots. 
  
• The utilization of new Advanced MS Joints permits human-like movements. 
  
• The Twin Buster Rifle Combination Mechanism can be reproduced. 
  
• Runner x9, Realistic decal x1, Instruction manual x1 
  

• GW large items following the Exia! Exist beyond the Gundam [Raiser] appeared in the RG!
  
• The three-dimensional the Raiser of Real grade unique incorporate a new interpretation, while based on the actual historical research!
  
• deep the aircraft characteristics from modern technology
  
• Is a characteristic of the aircraft [GN DRIVE] is interpreted as a propulsion engine energy transfer institution. The design of real technology and promotion agencies and high-voltage power transmission line of exploration satellite captured in design.
  
• GN DRIVE is fitted with click-type arm of. Can be freely angle adjustment. It is also possible to make the particle storage tank type that appeared in the movie version in the selection formula.
  
• Proportion of considering the setting
  
• Double O adopted the same Advance de MS joint and Exia is in a high-end models of Exia. While reproduce the successor machine design line in a common joint, and reproduce the distinctive form that is expressed in more Massive.
  
• Precision reproduction of Raiser
  
• Raiser is equipped with a slide mechanism to wing part, emphasized the linear design-conscious of real stealth fighter. A new interpretation plus actual aircraft in connection part and armed when combined with the body in reference, add a delicate mold.
  
• The fully reproduce a variety of armed
  
• GN Sword II, GN shield, GN Sword III, GN beam saber is included. Through the joint, can be mounted on the waist or shoulder portion, and the like. And equipped with each armed, sword play action in the play can be reproduced.
  
• Each rifle mode, of course GN twin lance form can be replicated. The GN shield concatenates 2 chome, it also possible to braid is equipped on both arms.
  
• Accessories: GN Sword II x 2, GN beam saber x 2, GN shield, GN Sword III, riser Sword effect, pilot figure (Setsuna, Suna?)
  

• An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
• With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
• Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
• Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
• Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RG 1/144 MSN-04 Sazabi

• Experience the RG Sazabi with the largest gimmick of 1/144 scale history.
  
• Red comet [Chia . Aznable] dedicated machine appearing in [Mobile Suit Gundam Char's Counter Attack] is made into RG.
• Various movable gimmicks that can reproduce the posing in the play as well as the mechanism on the airframe setting, and condensed on the 1/144 scale up to the original gimmick by a real machine verification unique to RG!
• Faithfully reproduce the aircraft, such as arms of arms, funnels etc., based on the sense of setting in the play.
• Pursue more realism by actual machine verification. A deployment mechanism is installed in the propulsion section of verniers and backpacks.
• In addition to abundant hand parts, arming that symbolizes Sotheby is attached. Due to various hand parts and high range of motion, both hand holding poses etc. can be reproduced.

• Beam shot - Rifle x 1
• Beam - Tomahawk x 1
• Beam - saber x 2
• Shield x 1
• Funnel x 6
• Missile x 1

• Molded article x 17
• Realistic decal x 1
• Instruction manual x 1

• Hi-? Gundam that appears in "Mobile Suit Gundam Char's Counterattack Beltorchika Children" has appeared in RG in pursuit of new interpretation of detail expression and reality!
  
• Equipped with a multi-link gimmick that slides the armor in conjunction with the movement of each joint. The armor of each part can be slid to expose the mechanical internal frame.
  

• Name: P-Bandai : RG 1/144 Tallgeese II
  
• The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  
• One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  
• Release date ETA December 2018 and delivery date around January 2019

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II