• Home
  • Showing Gundam Model Kits + REAL GRADE (RG) product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing Gundam Model Kits + REAL GRADE (RG) product(s)

Showing 1 - 30 of 96 products

Quick View
img
SAVERM62.40

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM87.50
RM87.50 Add to cart
Quick View
img
SAVERM62.40

[004] RG 1/144 MS-06F Zaku II

  • Zaku II, which sustains the massive military potential of Zeon, joins in the RG series. Mounted the Real system. 
  • The head parts include two kinds of antennas for commander, and a head for ordinary soldier. 
  • F type armor is faithfully reproduced. 
  • Various hand parts are included. The right hand has better gripping force to hold the rifle. The left flat hand makes it look more expressive. 
  • Adopted the ""Advanced MS joint"". 
  • The ""Realistic decal"" makes it possible to reproduce mechanical texture. 
  • Runner x9, Realistic decal x1, Instruction manual

RM87.50
RM87.50 Add to cart
Quick View
img
SAVERM30.00

Third Party Brand RG 1/144 MSN-04 Sazabi

Third Party Brand RG 1/144 MSN-04 Sazabi

Brand : GaoGao
Grade : HG
Scale : 1/144
Model : MSN-04 Sazabi

Stand and Water Decal is included

Please note that this is non-Bandai item.

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM69.70

[008] RG 1/144 RX-178 Gundam MK.II (A.E.U.G)

"RX-178 Gundam MK-II", the legitimate successor of ""RX-78 GUNDAM"", appears as the seventh RG model. 
The newly adopted "advanced MS joints" enable to expand the range of motion. 
The outer armor can be attached to the frames after assembly, to enjoy the realism of building up the MS. 
Many gimmicks of the RG "real system""can be found such as the opening and closing of the cockpit hatch and more. 
The pipes on its backpack and behind the knees are made of real fabric cords for richer texture. 
Gundam MK-II (Titans) is also released at the same time. 
runner x11, realistic decal x1, instruction manual x1

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM74.90

[010] RG 1/144 Zeta Gundam

  • RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
  • RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
  • As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
  • Zeta Gundam appeared -.
  • The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
  • Adopt a new joint MS Advanced mode.
  • Comes with realistic decals.
  • Accessories: beam rifle, shield, grenade x 2, beam saber x 2,
  • Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

RM105.00
RM105.00 Add to cart
Quick View
img
SAVERM69.70

[013] RG 1/144 RG-78 GP01FB Gundam Full Burnern

  • Start-up plan in the RG series GP! - Simultaneous release of the two aircraft!
  • RG series of bullet 12,13 first prototype GP01 Gundam from [Mobile Suit Gundam 0083]
  • And (code name Zefiransasu), that the universe is a specification Furubanian.
  • The RG series is set anime called aircraft that are based on the RX78-2 Gundam renovation
  • I can have inheritance. As an expression, it was to improve the range of motion of the RG RX-78-2 Gundam on sale
  • Following the adoption of common development plan of the two aircraft in the play mode Advanced MS joint 5. In addition,
  • The core fighter is equipped with a horizontal connection mechanism. In addition, the repair of GP01 in the play
  • It Furubanian and core fighter aircraft design from a different background who became thus almost
  • The leg unit also design products while leaving the color of the ground war, specializing in aerospace
  • Dropped, they represent a set form that skillfully. In precise detail unique to RG
  • I have a real representation of mobile suits.
  • Fully reproduce the core block system. A gimmick, such as wings and nose rotation, backpack
  • By incorporating the core block system, which is one of the features of the first prototype Gundam,
  • Fully reproduce the deformation of the core Fighter II.
  • Specification first prototype Gundam universe ... Furubanian first prototype Gundam RX-78GP-01Fb.
  • Standard specifications for equipment in the atmosphere, additional equipment for the purpose of improving mobility is applied.
  • And Universal Boost pod on the back, is one of the characteristic features.
  • Accessories: beam rifle, beam saber × 2, Jytte beam, shield,
  • 1/144 pilot figure

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM69.70

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM82.20

[018] RG 1/144 Gundam 00 Raiser

  • GW large items following the Exia! Exist beyond the Gundam [Raiser] appeared in the RG!
  • The three-dimensional the Raiser of Real grade unique incorporate a new interpretation, while based on the actual historical research!
  • deep the aircraft characteristics from modern technology
  • Is a characteristic of the aircraft [GN DRIVE] is interpreted as a propulsion engine energy transfer institution. The design of real technology and promotion agencies and high-voltage power transmission line of exploration satellite captured in design.
  • GN DRIVE is fitted with click-type arm of. Can be freely angle adjustment. It is also possible to make the particle storage tank type that appeared in the movie version in the selection formula.
  • Proportion of considering the setting
  • Double O adopted the same Advance de MS joint and Exia is in a high-end models of Exia. While reproduce the successor machine design line in a common joint, and reproduce the distinctive form that is expressed in more Massive.
  • Precision reproduction of Raiser
  • Raiser is equipped with a slide mechanism to wing part, emphasized the linear design-conscious of real stealth fighter. A new interpretation plus actual aircraft in connection part and armed when combined with the body in reference, add a delicate mold.
  • The fully reproduce a variety of armed
  • GN Sword II, GN shield, GN Sword III, GN beam saber is included. Through the joint, can be mounted on the waist or shoulder portion, and the like. And equipped with each armed, sword play action in the play can be reproduced.
  • Each rifle mode, of course GN twin lance form can be replicated. The GN shield concatenates 2 chome, it also possible to braid is equipped on both arms.
  • Accessories: GN Sword II x 2, GN beam saber x 2, GN shield, GN Sword III, riser Sword effect, pilot figure (Setsuna, Suna?)

RM115.50
RM115.50 Add to cart
Quick View
img
SAVERM69.70

[019] RG 1/144 Gundam Astray Red Frame

  • Adopted the inner frame system "The Advanced MS Joint". 
  • Inner frames and outer armor move relative to each other, just like real human. 
  • The finely color-coded parts can express the shades without painting. 
  • Luster of metal can be expressed with realistic decals. 
  • Includes various marking stickers. 
  • The Japanese sword "Gerbera Straight", is silver color plated. The pattern on the blade is also reproduced. 
  • Includes a beam rifle, beam sabers and a shield. 
  • Runner x9, Realistic decal x1, Instruction manual x1

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM94.60

[022] RG 1/144 Sinanju

- Leaders of the [with sleeves], of crimson that Full Frontal to boarding MS` Sinanju `finally appeared at RG!

- RG POINT1: flexible thruster
Production enhancement of flexible thruster designed arranged by the actual historical research. Evolution to a more Gimikaru structure. Open and close while the medium mechanical exposed.

- RG POINT2: texture representation
Reproduce the whole body to arranged a gold patterned portions `engraved` in the plating and parts division. The underlying red molded color gloss injection specification. Beautiful glow of just Sinanju assemble enters the hand.

- RG POINT3: thrusters armor slide gimmick equipped
Thrusters of whole body equipped with a gimmick that the armor part to slide. Produce a mechanical sense of mechanical visible production.

- RG POINT4: high density detailing
Reflected in the whole body mechanical the Hajime Katoki dense detail design by draw down Mr..

- Reproduction of the armed
Equipment of Sinanju is included. Shield also adopted the engraving process. Back also detail reproduction.

- Accessories: beam rifle, beam saber, beam ax, shield, beam effect parts x— 3 types, weapons possession (left and right), palm (left)

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size : 31 x 20 x 11 cm

RM133.00
RM133.00 Add to cart
Quick View
img
SAVERM87.20

[024] RG 1/144 Gundam Gold Frame Amatsu Mina

RG 1/144 Gundam Astray Gold Frame Amatsu Mina


  • Descent to the guardian angel gold frame heaven Mina in the sky of the declaration] from the super popular Gaiden [Mobile Suit Gundam SEED ASTRAY] is RG!
  • RG POINT 1: reproduction of by the new gimmick [Maganoikutachi] -
  • Development and expansion and contraction gimmick mounted in [Maganoikutachi] back.
  • Telescopic mechanism is detail on the basis of the mechanism, such as a real machine of the actuator, reproduce the gimmick.
  • Reproduce the deployment to the storage and front to back.
  • Strengthening `grab` mechanism for as Grapple.
  • Arm movable, expansion and contraction is equipped with the RG own mechanism.
  • RG POINT 2: A new design by own actual historical research -
  • RG POINT 3: realistic armor part texture of heaven Mina -
  • RG POINT 4: first three-dimensional at 1/144 a spear-like weapon of offense and defense together [Okitsunokagami] -
  • Blade and beam shield is reproduced in clear plastic.
  • RG POINT 5: reproduce a variety of equipment of heaven Mina -
  • accessories
- Otsukinokagami × 1
- Torikerosu Kai × 1
- Totsukanotsurugi × 2
- Tsuruhanotachi × 1
- Maganoshirahoko × 2

RM122.50
RM122.50 Add to cart
Quick View
img
SAVERM94.60

[025] RG 1/144 RX-0 Unicorn Gundam

RG 1/144 RX-0 Unicorn Gundam

In the fall of 2017, a 1/1 scale RX-0 Unicorn Gundam will be installed at the Diver City Tokyo Plaza shopping center, and to commemorate the event, Bandai is bringing out this amazingly detailed RG Unicorn Gundam!  It features an advanced inner framework, and it can transform between Unicorn mode and Destroy mode. 

Accessories:
- RG 1/144 Unicorn Gundam parts
- Beam Magnum
- Shield
- 2 beam sabers
- Hyper Bazooka
- Sticker sheet
- Instructions

RM133.00
RM133.00 Add to cart
Quick View
img
SAVERM107.10

[027] RG Unicorn Gundam 02 Banshee Norn

[027] RG Unicorn Gundam 02 Banshee Norn

Accessories: 
Beam Magnum x 1, 
Revolving Launcher x 1, 
Armed Armor DE x 1, 
Armed Armor XC x 1, 
Beam Saber x 2

RM150.50
RM150.50 Add to cart
Quick View
img
SAVERM119.50

[029] RG 1/144 MSN-04 Sazabi

RG 1/144 MSN-04 Sazabi

  • Experience the RG Sazabi with the largest gimmick of 1/144 scale history.
  • Red comet [Chia . Aznable] dedicated machine appearing in [Mobile Suit Gundam Char's Counter Attack] is made into RG.
  • Various movable gimmicks that can reproduce the posing in the play as well as the mechanism on the airframe setting, and condensed on the 1/144 scale up to the original gimmick by a real machine verification unique to RG!
  • Faithfully reproduce the aircraft, such as arms of arms, funnels etc., based on the sense of setting in the play.
  • Pursue more realism by actual machine verification. A deployment mechanism is installed in the propulsion section of verniers and backpacks.
  • In addition to abundant hand parts, arming that symbolizes Sotheby is attached. Due to various hand parts and high range of motion, both hand holding poses etc. can be reproduced.

[Accessories]
  • Beam shot - Rifle x 1
  • Beam - Tomahawk x 1
  • Beam - saber x 2
  • Shield x 1
  • Funnel x 6
  • Missile x 1

[Product content]
  • Molded article x 17
  • Realistic decal x 1
  • Instruction manual x 1

RM168.00
RM168.00 Add to cart
Quick View
img
SAVERM79.70

[035] RG 1/144 Wing Gundam (TV Ver.)

The long-awaited RG version of the TV version of Wing Gundam with completely new modeling!
?? Various gimmicks to reproduce the setting mechanism and poses in the play, and the original gimmick based on the actual machine verification are condensed to 1/144 scale.
?? Introduced an original movable gimmick with the image of a bird in the wing part based on the actual machine verification unique to RG.
?? Advanced MS joint is used for the base of the wing.
?? Built-in movable gimmicks on shoulders and body block to reproduce the dynamic posture of Buster rifle and beam saber.
?? By rearranging the parts, it can be transformed into a bird form.
?? By using action-based compatible parts, it is possible to display not only in MS state but also in bird form.

[Accessories]
?? Buster rifle x 1
?? Shield x 1
?? Beam saber x 1
?? Hand parts (left and right) x 3 types each
?? Weapon holder (right) x 1 type
?? Action base compatible parts x 1
?? Realistic decal x 1

RM112.00
RM112.00 Add to cart
Quick View
img
SAVERM2.00

Third Party Brand RG #37 1/144 God Gundam

Third Party Brand RG #37 1/144 God Gundam


Brand : Third Party
Model : God Gundam
Scale : 1/144
Grade : Real Grade

Please note that this is Not-Bandai product

RM46.00
RM46.00 Add to cart
Quick View
img
SAVERM87.20

[037] RG 1/144 God Gundam

Bandai RG 1/144 God Gundam

-From [Mobile Fighter G Gundam], [God Gundam] is now available in RG! Pursuing a structure close to the human body, achieving the largest range of motion in RG history!

-Pursuing movement as if tracing the human body unique to mobile fighters.
-With the advanced MS joints introduced on the shoulders and wrists, you can reproduce the characteristic [arms folded] pose.
-Introduced a mechanism that can move greatly back and forth and left and right on the fuselage. A telescopic gimmick is mounted on the shoulder to secure a range of motion on the side.
-A 3-axis movable structure is used for the neck. Movements such as pulling the chin and sticking out the face are possible.
-The expansion and contraction of the muscles that occur in the human body when bending the knee is expressed by denting a part of the back peach parts. The axis where the knee armor sinks is adopted, and the movement just like the human body is reproduced.
-A new mechanism is used to move the toes, allowing the feet to touch the ground while opening the legs almost horizontally.
-Multi-stage movement from the chest to the waist, and by introducing a slide mechanism to the hip joint, it is possible to kick up the legs while flipping up the waist front armor.
-The movable axis at the base of the fin allows the fin to flutter behind.
-The base of the nail and the thumb cover are equipped with a movable axis to reproduce the god finger.
-Comes with an original arrangement of the sun ring effect.

[accessories]
? God slash x 2
? Hand parts x 1 set
? Joint for connecting the sun wheel effect x 1
? PET sheet (sun wheel effect) x 1 set
? Realistic decal x 1

RM122.50
RM122.50 Add to cart
Quick View
img
SAVERM105.50

[040] RG 1/144 RX-78-2 Gundam Ver.2.0

The latest designed internal frame is inspired by a semi-monocoque structure, allowing you to relive the construction of a mobile suit.
The joint structure, which returns to the original design, has adopted a new structure in which the parts that look like joints bend properly by reinterpreting the movable axis.
The legs are a reconsideration of the hand-to-hand combat MS Gundam and use composite frame joints to draw an outline similar to that of a human when it moves.
Details are engraved on parts that are not visible from the outside, such as joints and the backs of parts. It has a flawless design that eliminates conspicuous mounting holes and integrates it with the design.
The intricately colored head is thoroughly reproduced by color-coding by molding color. Details have been added down to the smallest details such as the twin eyes, main camera, magazine drum, and cheek duct.
Panel lines that reflect the support from the mechanism are divided into functional blocks. It is designed with the image of the actual dividing line in mind.
The exterior design is a fusion of the latest interpretation and a return to origins, not only by adding small details, but also by taking into account the overall shape of each part, such as the edges and curved surfaces. By composing the white body with two-tone molding colors, the amount of information (shading) as a three-dimensional object is fully produced.
Core Fighter can be transformed into Core Block. In addition to reproducing the proportions of the aircraft form, the newly developed auxiliary joint gimmick is built into the compact core block, contributing to the realization of free posing of the Gundam.
As an RG original gimmick, the chest armor covering the cockpit opens and closes up and down.

[Accessories]
Beam rifle x 1
Beam saber x 2
Shield x 1
Hyper bazooka x 1
Landing gear parts for core fighter x 1 set 
Hand parts x 1 set
 Realistic decal x 1

RM122.50
RM122.50 Add to cart
Quick View
img
SAVERM104.60

[38] RG 1/144 Gundam Epyon

The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!

[Includes]:

Beam sword
Beam sword holder
Shield
Heat rod
Hands (x1 set)
Display joint (x2 types, for robot mode & pterosaur mode)
Lead wire
Decals

RM147.00
RM147.00 Add to cart
Quick View
img
SAVERM199.20

[041] RG 1/144 Akatsuki Gundam (Oowashi equipped)

  • From "Mobile Suit Gundam SEED DESTINY", the Akatsuki Gundam equipped with the Steller's Eagle is plated in three types of gold and turned into a RG figure!
  • The multi-faceted shape of the Gundam makes the whole body shine, and the angle of light reflection is adjusted to express the glittering coating of the "Yata no Kagami".
  • The Steller's Eagle's nose, hatch, beam cannon, etc. are deployed. Both wings can also move flexibly, and it can be reproduced when attached to the main body.
  • By using some of the frame parts of the RG Strike Gundam, the same action is achieved.
  • The shoulders have a pull-out mechanism to expand the range of motion. The hip joints can also be opened widely, allowing for bold poses.
  • Equipped with a swing gimmick for the torso and a sliding gimmick for the armor on the arms and legs. It can be moved according to the pose.
  • Equipped with a movable gimmick on the vernier on the top of the shoulders and the side of the legs.
  • Realistic decals reproduce the markings on the whole body.
  • Compatible with the separately sold "HG 1/144 Destiny Gundam Spec II & Zeus Silhouette", so the Zeus Silhouette can be attached.
  • * To attach the Zeus Silhouette, you will need the "Zeus Silhouette Connection Parts" included with the "RG 1/144 Akatsuki Gundam Shiranui Pack" (tentative name, sold separately), which will be available for order at Premium Bandai at a later date.

[Accessories]
  •  Beam saber (connected) x 1
  •  Beam rifle x 1
  •  Shield x 1
  •  Hand parts x 1 set
  •  Realistic decal x 1
  •  Display base x 1

RM280.00
RM280.00 Add to cart
Quick View
img
SAVERM87.20

[042] RG 1/144 Shining Gundam

* From Mobile Fighter G Gundam, Shining Gundam is commercialized with a transformation into Super Mode unique to RG, which pursues a realistic appearance and movable mechanism!
* Pursuing the movable mechanism of the whole body, Super Mode is reproduced without replacement.
* Transformation to Super Mode of the head does not require replacement.
* Realistic texture and detail are produced when the shoulder cover is deployed.
* Arm cover is equipped with a pull-out and deployment gimmick.
* Internal vernier is exposed in conjunction with the deployment of the leg cover.
* Toes extend forward while ankle cover rotates backward for increased stability.
* Thorough pursuit of human movement. Adopts a frame structure optimized for mobility, allowing for more flexible posing.
* In addition to 3-axis movement, the neck is equipped with a swing mechanism to allow for dynamic poses.
* Hand parts for Shining Finger are included. Other expressive hand parts are included to expand the range of poses.

[Accessories]
* Beam sword x 2 types
* Hand parts x 1 set
* Realistic decal x 1

RM122.50
RM122.50 Add to cart
Quick View
img
SAVERM20.00

Third Party Brand RG 1/144 MSN-04FF SAZABI with Double Horn Funnel

Third Party Brand RG 1/144 MSN-04FF SAZABI with Double Horn Funnel

Brand : GaoGao
Grade : HG
Scale : 1/144
Model : MSN-04FF SAZABI with Double Horn Funnel

Stand and Water Decal is included

Please note that this is non-Bandai item.

RM78.00
RM78.00 Add to cart
Quick View
img
PO PriceRM49.00

GaoGao RG 1/144 RX-78-2 Gundam Ver.2.0

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2026
Estimate arrival : FEB 2026

- P-O Price RM49.00
- Deposit RM10.00, Balance RM39.00
- We will inform to make balance RM39.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Third Party G 1/144 RX-78-2 Gundam Ver.2.0

Brand : GaoGao
Grade : RG
Scale : 1/144
Model : RX-78-2 Gundam Base Color

Please note that this is Non-Bandai product

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Add to cart
Quick View
img
PO PriceRM129.00

Panda Model 1/100 Gundam RX-78-2（RG 2.0 Ver.)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM129.00
- Deposit RM20.00, Balance RM109.00
- We will inform to make balance RM109.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Panda Model 1/100 Gundam RX-78-2?RG 2.0 Ver.)

Brand : Panda

Scale : 1/100
Grade : RG 
Model : Gundam RX-78-2

This is a [Panda Model] brand RG Ver.20 but scale 1/100 RX-78-2 model.

Features: 
* Legs, hands, and waist can be puffed up
* Eyes are magnetically controlled and light-up

Includes: 
* Water decals
* Stickers
* Magnetic control light
* 1/144 to 1/100 action base adapter

Please note that this is non-Bandai product.

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
SAVERM69.00

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom


This kit comes with a new set of decals and slightly remolded head armor piece to accommodate its antenna.

The black part of the head can reproduced by applying a decal seal that comes with the kit.

[ACCESSORIES]

  • * Giant Bazooka
  • * Zaku Bazooka
  • * Zaku Machine Gun
  • * Heat Hawk

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM70.00

P-Bandai: RG 1/144 Perfect Strike Gundam

The Mobile Suit Gundam SEED HD Remaster's take on Aile Strike Gundam has been added to the Real Grade kit lineup! With the newly molded Striker pack and battery pack system.

The kit also comes with new support pieces to accommodate the weight of its backpack and weapons. A new set of decal is also packed for detailing.

[ACCESSORIES]

-Beam Rifle
-Shield
-Armor Schneider x 2
-Beam Saber x 2
-Battery Pack x 4
-"Schwert Gewehr" 15.78m Anti-ship Sword
-"Panzer Eisen" Rocket Anchor
-"Midas Messer" Beam Boomerang
-"Agni" 320mm Hyper Impulse Beam Cannon

RM250.00
RM250.00 Request Stock
Quick View
img
SAVERM17.40

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II


Release Date: January 2020
Estimate Delivery Date: Feb 2020

Premium Bandai announces the release of the 18th entry to the ACE Pilot log model series. This time, Bandai Spirits will be releasing the Uma Lightning exclusive MS-06R-1A Zaku II that comes in its "Blue Thunder" color.
A sheet of newly designed water-slide decal will be included in the kit, markings and seals are specifically designed for Uma Lightning.
Provided with the same mold used in Real Grade Johnny Ridden's High Mobility Type Zaku, bold action and poses can be performed with its wide-ranged articulation.
[ACCESSORIES]
  • Giant Bazooka
  • Zaku Bazooka
  • Zaku Machine Gun
  • Heat Hawk

RM200.00
RM200.00 Request Stock
Quick View
img
SAVERM64.70

[033] RG 1/144 Force Impulse Gundam

-From [MOBILE SUIT GUNDAM SEED DESTINY], MS featuring the main character [Shin Asuka] in the first half of the story.

-Reproduce the MS form mechanism by combining the core splendor, chest flyer, leg flyer and force silhouette.
-Adopt advanced MS joint with insert molding on core splendor and fuselage. The internal frame and body frame can be separated from the runner in the assembled state, achieving precise details and deformable and movable gimmicks.
-Improved color reproduction by splitting parts, accurately expressing even the finer coloration of adjacent armor.
-As a demonstration of the actual machine unique to RG, force silhouettes are regarded as [aircraft], and gimmicks, details and textures are produced. The wing can be folded backwards.
-The forearm has a structure that can be twisted separately from the elbow. The shoulder armor rotates independently, reducing part interference.
-The waist parts can be moved for each block, greatly securing the range of motion.
-Knee armor moves in conjunction with leg movement.
-In addition to the beam rifle, shield, k nife, and beam saber, four hand parts for each of the left and right, such as a hand grip, a hand, and a weapon holding, are included as options.

[accessories]
* High energy beam rifle x 1
* Mobile shield x 1
* Vajra beam saber x 2
* Folding razor vs armored k nife x 2
* Silhouette flyer x 1
* Hand parts (left and right) x 4 types each
* Realistic decal x 1

RM115.00
RM115.00 Request Stock
Quick View
img
SAVERM90.00

RG 1/144 MSN-06S Sinanju [SPECIAL COATING]

Release Date: August 2020
Estimate Delivery: September 2020

Another kit has been added to the Premium Bandai Special Coating series model kits! This time, Full Frontal\'s Sinanju from the Mobile Suit Gundam UC will be treated with high gloss and metallic finishing for luxurious presentation. This limited model comes with all the parts shared with the regular retail released RG Sinanju, including the sticker decal seals.

Just like the original retail kit, this version also has chrome golden parts for its Sleeves and Neo Zeon crests and some of its armor parts.

The kit is also completed with its original accessories from its Beam Rifle that can be converted and combined with the sold separately bazooka. It also comes with two Beam Sabers that can be holstered inside its arm armors when not in use. And of course, it comes with the Sinanju\'s shield that can be combined with its two beam axes which also comes with complete effect parts!

RM590.00
RM590.00 Request Stock
Quick View
img
SAVERM45.00

P-Bandai: RG 1/144 nu Gundam HWS Expansion Parts

Package Content:

---------------------
CHEST ARMOR UNIT
The chest armor unit is integrated with shoulder missile launcher.
It is also equipped with deployment gimmick on its front armor to reveal the missile launcher inside it.

HYPER MEGA RIFLE
HWS nu Gundam will not be completed without its Hyper Mega Rifle.
It is molded in multiple parts for it to be able to adapt some expansion and contraction gimmick.

LEG THRUSTER UNIT
The leg armors are extended with huge thruster units, to help the balance of its weight distribution, and to give the HWS nu Gundam a boost in space combat.

HIGH MEGA SHIELD
Given its huge appearance, the high-mega shield contains light weight parts to support the balance of its unit.
The barrel boosters can also be extended to a more dynamic presentation.

RM135.00
RM135.00 Request Stock
Real Grade Gundam (RG) is a line of Gundam Kits that was first introduced in 2010 as part of Bandai 30th Anniversary Commemoration Project. RG lines are 1/144 scale kits featuring an advanced articulation of the Perfect Grade (PG) kits, a full inner frame of the Master Grade (MG) kits and affordability of High Grade (HG) kits. The Real Grade line are designed to be realistic in terms of detail and color. It also used the Advanced MS Joint for its body inner frames. The tagline for the RG line is Excitement Embodied.

Showing 1 - 30 of 96 products