Price Clear







Gundam Model Kits

Showing 31 - 60 of 448 products

img
SAVERM112.40

MG 1/100 GAT-X105E Strike Noir

  • Mobile Suit Gundam SEED C.E. 73: STARGAZER’s iconic Strike Noir Gundam joins the Master Grade lineup! 
  • Design features a gimmick strengthening the Strike Noir’s characteristic wing structure.
  • Wing base features a strong frame- Inner frame constructed from ABS and reinforced with screws. 
  • Fragarach swords and “Shorty” Beam Rifles can be wielded akimbo.
  • Shoulder armor features full rotation, and inner frame features sliding gimmicks at the thigh.
  • Accessories: Beam Rifle x1, “Shorty” Beam Rifle x2, Fragarach 3 Beam Blade x2, High-Energy Beam Rifle x2, Rocket Anchor x2, 1/100 Pilot Figure x2, Shield x1

RM157.50
RM157.50 Add to cart
img
SAVERM79.70

MG 1/100 MSA-003 NEMO

  • Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  • Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  • Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  • Dry transfer decals and clear Gundam stickers are included for markings. 
  • Simple instruction included in a box.

RM112.00
RM112.00 Add to cart
img
SAVERM122.00

MG 1/100 Freedom Gundam Ver.2.0

  • Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
  • Both frame and armor are completely rescupted with revised proportions! 
  • It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
  • Its wing and beam cannons flex for full burst mode, as well. 
  • A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

RM171.50
RM171.50 Add to cart
img
SAVERM84.70

MG 1/100 RX-79(G) Gundam Ez8

This "ground pounder" carries a backpack (could hold a car) which opens for weapons storage. Cockpit armor panels fold down. Includes an unpainted figure of Pilot Shiroh Amada. The instruction book is 19 pages and includes a "Documentary photographs" page, and painting guides. Weapons include Beam Rifle, 10mm Machine Gun, Hyper Bazooka (Ground Type), Beam Saber and Shield.

RM119.00
RM119.00 Add to cart
img
SAVERM129.50

MG 1/100 Gundam Epyon EW

  • Gundam Epyon is newly designed in the EW version. 
  • It can be completely transformed from the MS mode into the flying mode. 
  • Thanks to "the pullout system", you can reproduce its heat rod's whip. 
  • Various gimmicks give expression to "Soryu". Its neck, mouth and hand claws are movable.
  • Includes marking stickers designed by Hajime Katoki.

RM182.00
RM182.00 Add to cart
img
SAVERM62.40

MG 1/100 Shining Gundam

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

RM87.50
img
SAVERM94.90

MG 1/100 Shenlong Gundam EW Ver.

  • The 3rd volume of the EW version is Shenlong Gundam! 
  • The EW ver. Dragon-Hang has been reproduced. The new design of Dragon-Hang has been reproduced, with 5 points of articulation allowing for the opening of the "Fang" gimmick to be reproduced. 
  • Marking work designed by Hajime Katoki. 
  • Accessories: Dragon-Hang, Beam Trident, Shield

RM133.00
RM133.00 Add to cart
img
SAVERM97.10

MG 1/100 Wing Gundam EW Ver.

  • Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  • Tons of new features! 
  • Molded in updated colors as shown in EW! 
  • New package art creates a unified look for the MG Endless Waltz series! 
  • MG EW series produce a sense of a new package!
  • Marking decals designed by Hajime Katoki.
  • Parts expand for performance-based dynamic posing! 
  • Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2

RM136.50
RM136.50 Add to cart
img
SAVERM161.40

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM227.50
RM227.50 Add to cart
img
SAVERM146.90

MG 1/100 00 Gundam Seven Sword/G

  • From Mobile Suit Gundam 00V: the variant of the Gundam 00- the 00 Gundam Seven Sword!
  • Includes an arsenal of weaponry. 
  • Both the Suit and weapons are packed with gimmicks!
  • Includes new kneecap parts unique to the Seven Sword!
  • Includes all Seven Swords and the GN Sword II Blaster! 
  • GN effect parts are reproduced using clear parts, and fixed joint are installed for easy weapon manipulation. GN Sword II Blaster features an expandable hilt, and can be mounted onto the binder.
  • Both Shield and Sword mode mode of GN Buster Sword II can be reproduced!
  • LED unit (sold separately) can be installed for a more accurate look!
  • Also includes GN Sword II Long and Short (both featuring gimmicks), and GN Katars can be connected to shift to shield form!

RM206.50
RM206.50 Add to cart
img
SAVERM111.40

Bandai MG 1/100 Force Impulse Gundam

  • The commercialization of the Mobile Suit Gundam SEED DESTINY] Force Impulse Gundam Shin Asuka to boarding that appeared in at the long-awaited MG.
  • Based on the TV set [Mobile Suit Gundam SEED DESTINY] original animation director is Shigeta Satoshi of cooperation, setting and, to pursue shape.
  • Fully reproduce the deformation and coalescence, which is a feature of the force impulse. Each form can be exhibitions by the landing gear.
  • And when leg flyer, MS form at the time, both legs of the interlocking gimmick internal organs. Other, you can have contact to the elbow, and the interlocking mechanism built.
  • The side armor, deployment knife Built

RM157.50
RM157.50 Add to cart
img
SAVERM20.00

Eagle Model 1/100 Force Impulse Upgraded Ver. (EG-01A) with Metal Inner Frame

Eagle Model 1/100 Force Impulse Upgraded Ver. (EG-01A) with Metal Inner Frame

Model : Force Impulse 
Scale : 1/100
Grade : Master Grade

Include : 
- Metal Inner Frame
- Dedicated Base

Update Details:
1. Comprehensively Updated And Upgraded Materials
2. Mold Repairs To Enhance Sharpness
3. Repairs To Details Such As The Head Sculpt
4. Repairs To The Skeleton For A Tighter Fit
5. Comprehensive Improvements To Assembly

Please note that this is Non-Bandai product

RM170.00
RM170.00 Add to cart
img
SAVERM74.90

MG 1/100 MSM-07S Char's ZGok

  • ZGok Char customise with shining Red ver!
  • The expertly designed inner frame system allows flexibility and poseability to equal the "real" thing in the animated series.
  • The bellows rims (the loopy things on its arms and legs) even stretch out a little, for added reach and flexibility. - Weapon: 4 iron jaws

RM105.00
RM105.00 Add to cart
img
SAVERM99.60

MG 1/100 YMS-15 Gyan

  • From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  • Double hip joints allow wide, sweeping range of motion in the hips. 
  • LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  • Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  • Includes MQuve figure in 1/100 scale and 1/20 scale.
  • Accessories: Beam Sword x1, Shield x1

RM140.00
RM140.00 Add to cart
img
SAVERM94.90

MG 1/100 MS-07B Gouf Ver. 2.0

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  

A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal. This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements.

In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time!

Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.

RM133.00
RM133.00 Add to cart
img
SAVERM97.10

MG 1/100 MSM-03 Gogg

  • MSM-03 Gogg (MG)
Finally, a Master-Grade kit of the MSM-03 Gogg, Zeon's mass production amphibious MS! Superb design and tooling by Bandai mean that your Gogg, when built, will be able to stand in just about any pose you might have seen in the Gundam anime! Bandai's inner frame system is highly jointed, with armor parts laid over top of a flexible inner skeleton, making those long arms more poseable than they look.

RM136.50
RM136.50 Add to cart
img
SAVERM140.00

[Daban] 8802 MG 1/100 MB Strike Freedom Gundam - Metal Build alike ver.

[Daban] Metal Build Strike Freedom Gundam


Design base on Metal Build
- Dragoon System are included
- Action base are included

Please note that this is not Bandal product

RM160.00
RM160.00 Add to cart
img
SAVERM134.50

MG 1/100 Providence Gundam

MG 1/100 Providence Gundam

  • This is a Model Kit, Assembly Needed
  • Plastic is Pre-Painted no paint requires.
  • Comes with 
  • Yudikiumu beam rifle × 1
    And multifunction soldiers Sobotate system × 1
    - Dragoon injection for reproduction strut × 5
    - Grip hand (left and right) × 1 each
    - Open hand (left and right) × 1 each
    - Gun possession (right) × 1
    - Perforated grip hand (left and right) × 1 each
    Saber effect × 1
    Exhibition pedestal × 1

RM189.00
RM189.00 Add to cart
img
SAVERM90.00

Daban 6636 MG 1/100 RX-0 Unicorn Gundam + MS Cage

Daban 1/100 RX-0 Unicorn Gundam + MS Cage

Manufacturer: DABAN

Scale: 1/100
Grade: Master Grade
Series: Mobile Suit Gundam Unicorn

Please note that this is Non-Bandai product

RM110.00
RM110.00 Add to cart
img
SAVERM82.00

[Daban] 6648 MG 1/100 Hyaku Shiki

[Daban] 6648 MG 1/100 Hyaku Shiki


Brand : Daban
Scale : MG 1/100
Model Code : 6648
Gold Plating Version

Note : Please note that this is not Bandai Product

RM118.00
RM118.00 Add to cart
img
SAVERM43.00

MG 1/100 Gunner Zaku Warrior (Lunamaria Hawke Custom)

The Gunner Zaku Warrior has become an MG kit for the first time in celebration of the 15th anniversary of "Gundam Seed Destiny." It includes new adopted insert molding to make the assembly of energy pipes easier while still maintaining flexibility.  Functional detail includes movable mono eye, chest hatch that opens to reveal cockpit and seated Lunamaria pilot, and an inner frame structure that allows a high level of articulation.
-[Mobile Suit Gundam SEED DESTINY] To commemorate the 15th anniversary of broadcasting, Ganar Zak Worria is first-made in MG!

-Drop it into the latest format and reproduce it with proportions with arrangements.
-Feature [Guner Wizard] is equipped with the details and gimmicks of attention. The action of holding a long range beam can be reproduced.
-Power pipe adopts insert molding, and the ease of assembly is dramatically improved.
-The pipe is movable according to the movement of the leg by soft resin. It is a part without a process to assemble by integral molding.
-Left and right mono-eye movable, chest hatch open, rifle mounting hole open, and various gimmicks of parts!

[accessories]
* Beam assault gun
Hand grenade
Beam tomahawk
Ortho loss high energy long range beam gun
* Shield x 1
Luna Maria * Hawk figure x 2

[Item content]
Molded articles x 15
Tetron seal x 1
* Lead wire x 1
Varnish tube x 1
Manual x 1

RM150.50
RM150.50 Add to cart
img
SAVERM139.40

MG 1/100 Gundam Barbatos Lupus

The Gundam Barbatos Lupus from "Mobile Suit Gundam: Iron-Blooded Orphans" finally joins the "MG (Master Grade)" model-kit lineup from Bandai! The latest Gundam Frame allows for even more dynamic poses!

In addition to updating the shoulder joints, the Gundam Frame has a new improved range of motion for tilting the waist forward and backward, allowing for even more flexible poses.
The backpack is equipped with a swing gimmick that does not restrict the range of motion. Furthermore, the arms can be deployed without parts replacement.
The 200mm cannon on the arm can be rotated and slid to recreate its firing form.
Joint parts are included for suspending the twin maces from the backpack.
Equippd with a gimmick that moves the back of the knee armor in tandem with the movement of bending the legs. The leg and heel armor can be moved to avoid interference, allowing for a variety of poses.
A pilot figure of Mikazuki Augus is included that can be boarded in the cockpit hatch.

[Includes]:
* Sword mace
* Twin mace (x1 set)
* 200mm arm cannons (x2)
* Figures (x2)
* Joint parts (x1 set)
* Fingertip parts (x1 set)
* Stickers (x2 types)

RM250.00
RM250.00 Add to cart
img
SAVERM19.00

Daban 6637 MG 1/100 Gundam Unicorn (OVA Ver)

Daban MG 1/100 Unicorn


Brand : Daban
Code : 6637
Model : Unicorn
Grade : Master Grade
Scale : 1/100

Please note that this is not Bandai Product

RM79.00
img
SAVERM90.00

Daban 8827A FIX MG 1/100 Snow White Prelude Wing Zero Gundam with Metal Composite Skeleton

Daban 8827 MG 1/100 Snow White Prelude Wing Zero Gundam with Metal Inner Frame

Brand : Daban
Code : 8827
Grade : Master
Scale : 1/100
Model : Snow White Prelude Wing Zero Gundam
Content :
- Color Runners
- Water Decal
- Dedicated Base
- Metal Inner frame

Please note that this is NON-Bandai product

RM290.00
RM290.00 Add to cart
img
SAVERM124.50

MG 1/100 DOM Ver. 2020

From Mobile Suit Gundam, the popular MG 1/100 Dom has been upgraded with new molds and parts updates!
Improved exterior parts such as the waist and arms with a new mold. In particular, the shape of the arm has been modified so that the connection between the shoulder and forearm looks natural, and the joint structure of the elbow has also been redesigned.
A forward swing mechanism is mounted on the connection between the shoulder and the torso. The impressive pose of holding the giant buzz reduces the interference of each part and is decided smoothly.
A swing movable structure is newly adopted for the hip joint. In addition, the range of motion of the legs has been greatly expanded by adding movable axes to the thigh connection and updating the waist side armor.
The internal frame of the ankle has been changed to reproduce Dom\'s characteristic crouched pose.
A wealth of weapons such as Giant Buzz, Raketen Buzz, and Sturm Faust are included.

[Accessories]
  • Heat Saber x 1
  • Giant Buzz x 1
  • Raketen Buzz x 1
  • Sturm Faust x 2
  • 90mm Machine Gun x 1
  • Water slide decal x 1

RM175.00
RM175.00 Add to cart
img
SAVERM32.00

Daban 6653 MG 1/100 Dynames Gundam

Robot Name : MG 1/100 Dynames Gundam
Brand : Daban Code 6653
Type : Plastic Model Kit
Size : 20cm (Approx.)

Please note that this is not Bandai Product

RM78.00
img
SAVERM50.00

Mecha Ark 1/100 Dominant Titan (Messer Comander) Plastic Model Kits

Mecha Ark 1/100 Dominant Titan Plastic Model Kits

Model Brand : Mecha Ark
Model Height : 25cm
Some parts are pre-painted

Please note that this is Non-Bandai product

RM168.00
RM168.00 Add to cart
img
SAVERM16.00

[Hui Ju] MG 1/100 Providence Gundam Plastic Model Kit

Third Party Brand MG Providence Gundam

Brand : Hui Ju
Model : Justice 
Scale : 1/100
Grade : Master Grade

Please note that this is Non-Bandai product

RM82.00
img
SAVERM20.00

Daban 8831 MG 1/100 Justice Gundam Metal Build alike Design Ver.

Daban 8831 MG 1/100 Justice Gundam Metal Build alike Design Ver.

Brand : Daban
Model : Justice Gundam
Ver. : Metal Build alike
Grade : Master
Scale : 1/100
Material : ABS
Code : 8831

Please note that this is Non-Bandai product

RM180.00
RM180.00 Add to cart
Get ready to upgrade your collection with the exceptional Master Grade Gundam models. These high-quality Gunpla models offer the ultimate building experience, showcasing intricate details and accurate representations of the iconic Mobile Suits from the Gundam universe. In this blog post, we will take you through our top picks for the List of Master Grade Gundam. Whether you are a seasoned builder or just starting out, our Collection of Master Grade Gundam models has something for everyone.

Discover the best Master Grade Gundam available at www.gundam.my and get a glimpse of what sets them apart from the rest. From the intricate inner mechanics to the stunning outer design, these Overview of Master Grade Gundam figures will leave you in awe. Moreover, gundam.my guide you through the best Guide to the Best Master Grade Gundam to help you find the perfect model for your collection.

In addition, Master Grade (MG) is a line of Gunpla kits based on Mobile Suit Gundam anime series. It was first produced by Bandai in 1995 as part of the Gundam 15th Anniversary project.

Master Grade gundam are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits.

In 2002, Bandai started releasing a Master Grade line under the label of Ver. Ka (Version Katoki), in honor with veteran designer Hajime Katori.

Showing 31 - 60 of 448 products