• Picking up three years after Char’s Counterattack in UC93, Mobile Suit Gundam Unicorn continues the saga of the Universal Century!
• In full collaboration with the hobby division’s Hajime Katoki, the Unicorn Gundam becomes fully realized as a three-dimensional Master Grade! 
• With a strong emphasis on accurate form, the Unicorn Gundam can shift from Unicorn Mode into NTD (Destroy) Mode! 
• NTD Modes features an expanding armor, and the Psychoframe is recreated using transparent red elements to bring out the unique look of the Destroy Mode Unicorn! 
• Height increases in Destroy Mode.
• Recolored and featuring new details updated from the Unicorn Gundam Ver.Ka.
• Accessories: Beam Magnum, Extra Magazine x2, Beam Saber x2, Shield, Hyper Bazooka
• Picking up three years after Char’s Counterattack in UC93, Mobile Suit Gundam Unicorn continues the saga of the Universal Century!
• In full collaboration with the hobby division’s Hajime Katoki, the Unicorn Gundam becomes fully realized as a three-dimensional Master Grade! 
• With a strong emphasis on accurate form, the Unicorn Gundam can shift from Unicorn Mode into NTD (Destroy) Mode! 
• NTD Modes features an expanding armor, and the Psychoframe is recreated using transparent red elements to bring out the unique look of the Destroy Mode Unicorn! 
• Height increases in Destroy Mode.
• Accessories: Beam Magnum, Extra Magazine x2, Beam Saber x2, Shield, Hyper Bazooka
• Weight : 925g

• Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  
• Its distinguishing design of armor is finely re-created. 
  
• It can hold dynamic poses with its plentiful movable parts. 
  
• Gold and silver metallic color plating makes gorgeous impression. 
  
• Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  
• Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 
  

• This full burst mode special version box comes packed with the same MG kit as the normal version of MG Strike Freedom Gundam. 
  
• And this special box include gold coating parts, Dragoon effect parts, a special clear blue base stand, and a clear illustration poster of Strike Freedom vs Destiny. 
  
• Clear stands for each Dragoon are included, which can be attached to the special base stand and display them being sent flying out to its target(s). 
  
• Stickers and custom decal markings are included to detail-up the completed Strike Freedom Gundam kit.Comes with the gold inner frame, unique stand base that able to shoot the beam canon of dragoon system, some hate the stand base, some love it, and notice the 'wing' inner also in gold color, which is pretty cool too. 
  
• One of the similarity feature of strike freedom gundam full burst mode is the combineable rifle on the waist with unique fingers to posture for gun carrying look, this mecha really stand tall and cool among the scale and worth to collect. 
  

• This new kit of the God Gundam features the new "Fighting Action" frame system. This all new design is made from ABS plastic and screws together, so it's free from sticky work - glue. 
  
• No polycaps! This Gundam kits is extremely strong and holds positions without the sagging that earlier poly-cap designs suffered from. 
  
• The back and chest pannels also can be open to duplicate the "Hyper-Mode" from the anime series. 
  
• Flexible in posting. All parts are pre-colored nicely and snap together with instruction included. 
  
• Dry transfers for markings. 
  
• Domon Kasshu was included a figure of the pilot. 
  
• Two sets of hands - one standard and one in clear yellow to replicate the look of the energy ball attack.
  

• Up to reproduce the features of the G Gundam series action poses with the new action frame.
  
• By entering the body of the chest unit to reproduce the arms folded pose.
  
• Master Cross (weapons), with figures of Master Asia.
  

• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

• Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  
• Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  
• Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  
• Dry transfer decals and clear Gundam stickers are included for markings. 
  
• Simple instruction included in a box.

• Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  
• You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  
• The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1
  

MG 1/100 Gundam Avalanche Exia

-[Mobile Suit Gundam: Iron-Blooded Orphans] Gundam Barbatos 4th Form, the leading aircraft, has appeared as an MG!

-Reproduce the internal mechanism Gundam frame, Ahub reactor thoroughly! Color reproduction by molding color given in parts unit, expansion gimmick for more dynamic movement, abundant optional parts. The amount of information is suitable as a master grade.
-4th form The setting color of the exterior is faithfully reproduced with the molding color. The density and amount of information unique to MG are overwhelming.
-The internal structure, Gundam Frame, deeply underlines the setting in the play and reproduces the details. We adopt silver plating to cylinder.
-The first Gimbic spinning gimmick is installed as an MG in the chest Ahab reactor.
-The internal frame, cylinder and armor are interlocked by the movable shaft embedded in the upper body. This can produce a lively posing.
-The cylinder on the shoulder reproduces the mechanical structure that follows the movement to pull out. Can express Barbatos's aggressive posing.
-The knee is movable by interlocking the frame and the cylinder. The range of motion is expanded by pulling out the parts behind the knees, and natural standing knees are also possible.
-Reproduce the swing of the left and right, hip shaft movement in the standby position. You can enjoy the waiting pose with a distinctive look down.
-The hand part comes with 3 types of replacements. Weapons are designed to be attached to the palm of the hand with the hand of the weapon owner.
-Mace can slide grip and tip.
-Slide and folding gimmick is mounted on the gun of the glide gun. Pursuit of playability by the lock mechanism.

[accessories]
* Mace x 1
* Sword x 1
* 300 mm glide gun x 1
* Foil seal x 1
* Marking seal x 1

Product Detail

Eclipse Gundam, which is characterized by its sharp form, is the leading MS of this work.

Equipped with variants of MS form and MA form, it is three-dimensionalized as MG.

Able to transform into Mobile Suit Form or Mobile Armor Form (MA Form)

Can fit with other accessories such as Aile Strike Backpack, launcher weapon, sword weapon etc [Not included]

Other information - pending from official update

Key Features

• Fortune Meow Design Aesthetics: Faithful reproduction of the popular "Fortune Meow" resin design, featuring exaggerated proportions, sharper armor lines, intricate surface paneling, and mechanical venting details that far exceed standard retail kits.

• Full Plastic Assembly: No resin parts or glue required. This is a snap-fit kit (though some sanding/adjustment is recommended) made from ABS, PVC, and POM plastics.

• Massive Part Count: With over 1,000+ parts and approximately 59 runners, this kit offers a dense, long-lasting build experience comparable to Perfect Grade (PG) or high-end MGEX kits.

• Reinforced Joint System: Utilizes a significant amount of POM (Polyoxymethylene) material for the inner frame and critical joints. This provides high friction and durability to support the heavy backpack and accessories without sagging.

• Double Funnel Loadout: The kit includes a total of 12 Fin Funnels, allowing for the "Double Fin Funnel" configuration right out of the box.

• Advanced Color Separation: The runners are molded in multiple specific colors (including varying shades of white/grey and distinct orange accents) to achieve a near-perfect look without painting.

Specifications

• Scale: 1/100 (Master Grade size)

• Height:

  • Head Height: Approx. 24 cm

  • Total Height (with Funnels/Backpack): Approx. 40 cm

• Material: ABS, POM, PVC (Plastic Model Kit)

• Manufacturer: Farmer's Creation (Third-Party)

• Design Base: Fortune Meow Studio (Cai Miao Miao) Resin Kit

Box Contents

• Main Body (Nu Gundam)

• 12x Fin Funnels

• Double Fin Funnel Backpack Connectors (Wing Style)

• Beam Rifle & Shield

• Beam Sabers

• Display Stand (Styled after the "Metal Structure" base design)

• Water Slide Decals

Builder's Note (Important)

• Skill Level: Advanced/Expert. As a third-party kit, tolerances may be tighter than official Bandai products. You may need to sand pegs, trim "under-gated" nubs carefully, or use a pin vise to widen holes for a perfect fit.

• Articulation vs. Detail: While fully articulated, the sheer volume of the armor design limits range of motion slightly compared to a standard MG Nu Gundam Ver.[5] Ka. It is designed primarily for a commanding shelf presence and static posing.

• Face Detail: The face mask vents are typically molded solid (without open slits), so panel lining is highly recommended to bring out the details.

Daban Metal Build Strike Freedom Gundam

P-Bandai: MG 1/100 GM II Semi Striker 

• Liaoya
• Shenlong Shield
• Dragon Fang
• Beam Trident
• Action Base

- Gundam NT - 1 appeared in Ver. 2.0 from [Mobile Suit Gundam 0080 war in the pocket].

- Proportions and detail that followed the image in the play. Due to the multiple structure, even the inner walls of the inner frame and armor are reproduced.
- For the sealing of the shoulder joints, recreating the texture of `wrinkle` by adopting vinyl material.
- As MG original gimmick, when installing Chobam armor, it is possible to develop Gatling when carrying a shield.
- Reproduce the thruster development when chobam armor is installed.
- [Breaking blade antenna for reproducing during the play] and [BB Fighter Gundam NT - 1] 's original gimmick as [Bonus Parts] [Headgear] comes with it.

[accessories]
*  Chobam * Armor x 1 set
Blade antenna (broken state) x 1
*  Beam * saber x 2
Beam rifle x 1
*  Shield x 1
*  Hyper *  bazooka x 1

[Product content]
*  Molded article x 22
*  Vinyl material x 1 set

Gundam 2.0 in G-3 coloring. Includes accurate proportions and features that are faithful to the Gundam as it appeared in the classic animated TV series. An all new "full action inner frame" allows the Gundam's waist to twist and move forward and back even with the Core Fighter in place. Three part sole design enhances contact of feet with the ground. Accurately sculpted Core Fighter features a pilot's seat that rotates to face forward during transformation into Core Block mode.