A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 

Gundam MKII model unit. Coupled with parts for the G-Defender which lets you create an MG Super Gundam. Standing height almost 30cm! Almost all of the fins and hatches on the G-Defender move to allow various configurations, reveal missile bays, etc. Technical and historical notes Early during the Gryps Conflict, the Anti-Earth Union Group's newly-captured RX-178 Gundam Mark II mobile suit was soon outclassed by new variable-form mobile suits/mobile armor being developed by their Titans enemies. Although fairly impressive for its innovative new "movable frame" construction, the Gundam Mark II soon found itself left behind in terms of mobility, armor and firepower. To compensate for these shortcomings, the Anaheim Electronics Company developed a new weapon to enhance the Mark II's performance. Called the FXA-05D G-Defenser, this new space fighter-like unit was capable of docking with the Gundam Mark II. During cruise/flight mode, this form was called the G-Flyer. However, the Mark II could assume full control of the G-Defenser's weapons as a mobile suit, becoming what was commonly called the RX-178+FXA-05D Super Gundam. The Super Gundam sported an approximately 20% increase in speed/acceleration over the stand-alone Mark II, as well as provided the benefit of additional (and more effective) gundarium armor and the powerful long rifle and missile pods. These improvements allowed the Super Gundam to operate on a more equal footing with the high-performance variable mobile suits being fielded by the Titans at the time. Technical source:http://www.mahq.net Simple Instruction included in a box. Weight: 806g

• From the hilarious and utterly bizarre alternate-universe Gundam series G Gundam, comes the Neo Germany entry in the fray, Gundam Spiegel. 
  
• 2nd model from the G Gundam series! 
  
• Also included are unpainted 1/20 figures of Schwarz Bruder and Rain Mikamura. Simple instruction included in a box. 
• Weight:1000g
  

Made up of 11 runners of injection plastic and one runner of polycaps, with two small sets of decals for detail, this is easily one of the most complex of the Gundam versions. Lots of poseability thanks to polycaps at the joints. It does not feature the inner-frame system. Weapons included Beam Gun, 2 Laser Swords, Shield and Giant Beam Sniper. Simple instruction included in a box. Weight: 1000g

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

MS-14S Gelgoog Char Custom Ver.2.0

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

• "V operation" Gundam reinforced equipment for Gundam Ver.2.0 "G fighter" appears in a full spec. 
  
• The power reactor and the missile launcher unit of a new design are involved to B mechanism. 
  
• Gundam can become independent with stability according to the step of the tiptoe and the heel. 
  
• The caterpillar gives priority to the forming reproduction made of Pra, and reproduces various forms. 
  
• Accessories: 1 and shield × hyper hammer × one two kind of attachment for action base Landing gear ×1 expression and one Kiza ×1 and 1 and mass standing × row standing × two kinds of maintenance staff
  

• Mechanism of Zion threat. 
  
• The development story connected from mass production Zac to Gelgg is reproduced with the MG kit.
  
• Zac MS-06R of "Singh Matsnaga" specification of high mobile type Zac is made a kit by using the basic structure of Zac Ver.2.0 of the inner frame enhancement reproduction. The detail shape such as the leg, the shoulder, the shoulder armors, and forearms changes from MS-06R. 
  
• The Zac machine-gun, the Zac bazooka, the cartridge magazine in addition to the heat fork, and parts for the experimental bazooka modification are attached.
  

• Designed on the basic inner structure of the Zaku II Ver. 2.0, legendary Zeon ace pilot Johnny Ridden's custom Zaku II is added to the Zeon Master Grade lineup! 
  
• Features redesigned thruster housing and shoulder armor inspired by the Zaku II 06R.
• -  Monoeye -   camera movement gimmick allows for eye position to be changed.
• Separable spike elements set this kit apart from your standard Zaku. 
• Thanks to the updated power pipe assembly system, the once tedious process has been streamlined by using pre-positioned runners. 
• Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
• Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Giant Bazooka x1, 1/100 Pilot Figure x2, Action Base Joint x1

• RX-178 Mk-II Ver.2.0 Titans
  
• We wouldn't have thought that Bandai could have improved on their Master Grade kit of the Gundam Mk-II (except, of course, with a PG version!), until we saw the Version 2.0
• Newly-designed joints allow it incredibly realistic posing; especially in the legs. A tighter bend at the knee, and a joint that divides the heel and toe of the foot, provides better balance for action poses, and gives your Mk-II a realistic appearance when it's crouching, as though it's about to spring into action at any time! 
• The kit is all molded in colour and snaps together; vinyl tubing is included for weapons detail. Also included are three scale figures (one pilot and two maintenance crew) for positioning around the Mk-II while it's "docked". Not just an improvement on the original kit, the Version 2.0 takes the Mk.II to a whole new level!
  

• Big beautiful version 2.0 Master Grade Zeta Gundam comes with a bazillion parts (yes, I'm too lazy to count them. 17 ABS runners, one base, plus polycaps) and goes together in the new fashion, with the super new joints at the waist and in the arms and legs, allowing it even more freedom of movement and incredible posing than ever before! 
  
• It's fully-transformable when completed, too. What more could you ask for? (well, a life-sized version would be nice, but you'd get tired just lifting the polycaps, trust me). 
  
• Shield and beam mega launcher weapons (as well as the regular rifle, beam sabres, etc.) are included, and a custom catapult stand is included to hold it all up -- with all the extra armour and weaponry, it'll be a little heavy when completed! Two unpainted pilots and an unpainted miscellaneous crew member are included. 
  
•  All parts snap together and are molded in colour so paint and glue for the kit are not necessary; foil stickers and clear Gundam stickers are included for detail. 
  
• However, if you'd like to paint it, it would look pretty spiffalicious, and a paint scheme is provided (paint is of course sold separately).
  

MG Freedom Gundam (Extra-Finish Edition)

• MG FA-010S Full Armor ZZ Gundam
  

• MG RX-78-2 Gundam (Ver.1.5)
  
• This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  
• Upgrade product of the master's first grade! !
  

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. Not surprisingly, the robot of the same name was the main piece of hardware in the show. This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. Perhaps more impressive is the fact the this new Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). The new 1/100 MG Zeta Gundam is probably the most highly-engineered model Bandai has ever produced. Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those yellow antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. A watch battery can be installed to light up the cockpit of the Wave Rider (bulb included). And the kit also comes with the "Hyper Mega Launcher" (not shown in these photos and yes, that's really what it's called) -- a huge super-cannon that the Zeta uses to blast enemies from the sky in one shot (the cannon is about 30cm or 12" long when completed!). Also includes the usual "beam saber" sword, and little grenades that fit into operable hatches on the ends of its forearms. The Zeta in "Wave Rider" mode, seen from the top and bottom. This transformation takes place without any parts needing to be removed from the kit! All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. - red colored LED light included attached by the wings behind. - transformable into a "waveraider" (plane format). - decals included - sold only with 109.90; budgeted and worthwhile. MG MSZ-006 Zeta Gundam
  

• This particular version of the Rick-Dom never appears in any Gundam TV, only in the original novel as written by Gundam creator Tomino. Collectors love this stuff! Different color from the standard release, new weapons (Zaku Machinegun), and also includes an unpainted 1/20 Char figure, in military costume.
  

• Okay, for a monster machine like this, with parts sticking out all over, and which is so top heavy it cannot stand on its own, the naming of "Ex-S" seems appropriate, considering the homonym "excess." 
  
• But gosh, it's sooo sharp looking... Let me come back to that point about standing up by itself: It can't. At first, when I saw that this kit came with a display stand to hold it up, I was greatly dissapointed, as I really was looking forward to building it. 
  
• But then I started thinking about all the other Gundam kits of mine that have fallen over and broken or lost parts when I had them posed someplace, and I began to think that maybe a display stand isn't such a bad idea after all... 
  
• Of course the kit can transform into the long-range "G-Cruiser" mode, similar to the Zeta Gundam, and the display stand itself also converts into a mode specifically designed for displaying the kit when it's in ship mode. A whopping 31 runners of parts in all! Get ready for hours of cuttin' 'n' snappin' with this baby!
  

• - "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  
• is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  
• Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1
  

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

• Bandai's Master Grade (MG) "RX-78-3" is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980 (the original kit is still available, by the way. 700 yen). 
  
•  Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. Panels on the legs flip open to reveal internal mechanisms. The head has a panel, too. 
  
• Even the "Core Fighter" cockpit ship can be removed from its belly. Fine mesh parts cover the inside of the chest air intakes for added realism. Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit. All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• The RX-78-3 kit is identical to the RX-78-2 except that it is molded in blue and gray plastic, rather than the more "festive" colors of the original.