Price Clear







Showing Gundam Model Kits + MASTER GRADE Ver. Ka product(s)

Showing 31 - 40 of 40 products

img
SAVERM77.90

MG 1/100 Wing Gundam EW Ver.Ka

  •  The second in master designer Hajime Katoki’s detailed Ver.Ka like, the Wing was created under the watchful eye of Katoki himself! 
  • Dramatically redesigned color scheme and careful parts division lend the Suit a dynamic appearance. 
  • Fully hinged shoulder joint grants a wide range of motion. 
  • Full transformation into Neo Bird is included! 
  • Legs redesigned for maximum mobility.
  • Accessories: Buster Rifle x1, Beam Saber x1, Shield x1, 1/100 Pilot Figure x2

RM132.00
img
SAVERM63.90

MG 1/100 RX-78-2 Gundam Ver.Ka

Taken straight from the art of Katoki Hajime comes this Master Grade version of the RX-78-2. With all the detail we've come to expect from the Master Grade line -- a poseable inner frame with armour laid over the top of it -- this is definitely one for your display case! Parts are molded in colour and snap together for ease in assembly; no paint or glue are required.

RM128.00
img
SAVERM167.90

MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka

  • Novel version [Gundam UC] The Full Armor Gundam unicorn appeared in the late Master Grade! Fukui the author said , with the cooperation of Mr. Katoki (a mechanical designer), adding new weapons to the Unicorn. A number of packed with gimmicks to reproduce the militants.?
  • Includes armed 27 ++ Beam rifle, bazooka, and hand grenades, armed supplied All nine, 27 items + + equipped with all available weapons!?
  • Armed rich, can be fitted together. Beam rifle, hyper bazooka, Grenade launcher, etc. You can even hand. In addition, hyper bazooka can be fitted to concentrate on other weapons.?
  • Hyper Beam Javelin Armed new design! New design based on the image of Mr. Fukui Javelin was hyper beam. Exposure, such as the psycho-frame, with a large number of gimmick.?
  • Backpack equipped with arms for extra frame. Inset from the bottom of the backpack Folding arm joint so crowded, you can hold firmly.?
  • Besides the shield left and right arms, the back is also equipped ships with a total of three pieces.?
  • Comes with a stand to support the huge back thrusters. In heavily armed, and well Can be displayed. - Accessories: Beam Rifle x 2, saber x 2, bazooka x 2, hand grenades x 4, Missile Launcher with Grenade Launcher x 2 x 2,3, heat saber x 4, shield x 3, Gatling Gun x 6, Hyper Beam javelin x 2, only joint action based Figures x 4, support stand thruster expression x 1, Secret Parts.
Families of Unicorn series in glance:
  • BB-360 Unicorn Gundam
  • BB-360 Unicorn (Expo Version)
  • RX-0 Unicorn Gundam 02 Banshee (MG)
  • ?
  • Unicorn Gundam 02 Banshee (Unicorn Mode)
  • [134] Unicorn Gundam 02 Banshee (Destroy Mode) (HGUC)
  • RX-0 Unicorn Gundam HD Collar +MS CAGE
  • RX-0 Unicorn Gundam Destroy Mode
  • Unicorn Gundam Destroy Mode Titanium Finish
  • RX-0 Full Armor Unicorn Gundam Ver.Ka (MG)
  • RX-0 Unicorn Gundam (MG)
  • RX-0 Unicorn Gundam Ver.Ka

RM312.00
img
SAVERM159.90

MG 1/100 RX-93 Nu Gundam Ver.Ka

  • Accessories: beam rifle, shield, beam saber, beam saber (small), Fin funnel x? 6 
  • Item Size : 39 x 31 x 12 cm / 1163g


According to wikipedia

The RX-93 ? Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was piloted by Amuro Ray.

The ? Gundam was one of the most advanced mobile suits of its time in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, designed and used by Amuro Ray himself during the Second Neo Zeon War. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average value of specifications of each successive generations of Gundam-type units from the the original Gundam to the ?? Gundam, and updated with state-of-the-art technologies introduced at the time.

The ? Gundam's design also focuses on versatility and operational aspects as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycoframe, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.

Although its development was only partially completed at the time of its deployment, the ? Gundam proved itself to be a formidable mobile suit. The operating data obtained from the Silver Bullet (Funnel Test Type) was used in its development. It is the first Gundam-type machine to be equipped with Funnels. A newly developed MS control program is installed to account for the ? Gundam's center of mass during the separation and movement of the Funnel equipment.

Incorporating the Psycoframe technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ? Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a suitable Newtype pilot. When combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art mobile suit was able to almost single-handedly hold the whole Neo Zeon force by just itself, and its Psycoframe was put to the test to determine the history of humanity living on earth.

Following Amuro's failure to stop Char in attempting to drop Fifth Luna, Amuro decided to design a mobile suit that would be able to combat Char's MSN-04 Sazabi. This machine, the RX-93 Nu Gundam, was designed not only to be the true upgrade to the RX-78-2 Gundam, but also to be the ultimate Gundam. Unknown to Amuro, though, Char realized this would be the case and allowed Anaheim Electronics to pass on the psycho-frame technology for the Nu Gundam's use. However, testing of this machine would be interrupted when fighting between Londo Bell and Neo Zeon forces force Amuro and his girlfriend Chan Agi to take the half-completed Nu Gundam with them to save everyone.

Sadly, the lack of testing would easily been shown when, during one skirmish, Amuro's panicking caused his fin funnels to react, forcing Gyunei Guss to kill his captive, Kayra Su. As Londo Bell forces moved to stop Char from dropping Axis, Amuro and Char would go head to head, battling one another and practically ravaging their suits. In the end, another flaw revealed itself - the psycho-frame resonated with high emotions, pushing Amuro's already amazing Newtype powers to new heights, and managed to push Axis away from the Earth. The resonance creates a light that could be seen from Earth. The fate of both pilots however is unknown and remains a big mystery even to this day.


Weapons 

  • Beam Rifle - A high-powered beam rifle with a normal output of 3.8MW. It can be recharged by e-caps and with a greater fire rate than most beam rifles.

  • Beam Saber - The ? Gundam has a standard-issue beam saber stored on its left forearm, which can be drawn quickly to attack enemies in close range.

  • Fin Funnels - A form of remote weapon unique to the ? Gundam. Despite their name, the fin funnels equipped on ? Gundam are in function "bits", since they have built-in generators rather than the E-caps used by funnels. While this made them much more expensive to construct, and allowed less modules to be equipping than the standard, this had the enormous benefit of giving the fin funnels a tremendously long operational time. Circling the battlefield on their own, the fin funnels could be utilized in far more creative and strategic ways than standard funnels. Model number: AEV/PFF93AR.The actual beam fired by the fin funnels was also more powerful, given that they are emitted by a generator instead of an E-cap. The fin funnels also had the ability to generate a unique beam shield, known as a "fin funnel barrier", to provide a defense against both beam weaponry and solid projectiles with lower outputs compared to the beam shield's power consumption. Although these unique funnels proved incredibly effective and flexible in purpose, they were also much larger than the standard funnel, making them easier targets to shoot down. With the help of the Psycoframe technology, Amuro can utilize its fin funnels more effectively by thoughts alone.

  • v-Hyper Bazooka - 280mm bazooka that can be fired from its position on the backpack.

  • Shield - Issued on the ? Gundam is a custom shield emblazoned with Amuro's emblem. It features a built-in beam cannon and missile launchers. Amuro uses it in many strategic ways, such as fooling enemies that he was shot down by leaving the shield and the v-Hyper Bazooka, and attacking enemies once they lower their guards.

  • Large Beam Saber - Stored on the backpack, this beam saber presumably has a higher power rating than the saber stored on the left wrist and is used more often than the standard saber. The saber's pommel is capable of emitting a beam dagger on its end, but it is never seen used.

  • Vulcan Guns - Two head mounted 90mm vulcan guns that have been seen to shred armor.

  • Birdlime launchers - Fires an adhesive substance from the hands that can be used to repair small cracks in colony wall or to restrain soldiers on foot.

  • Dummy Launchers - Stored in the hands the launchers can deploy mobile suit sized dummy balloons as a decoys.

  • Psycoframe cockpit - The cockpit is composed of microscopic Psycommu receptors that allows the pilot to control the suit as if it is his/her own body.

RM260.00
img
SAVERM149.90

MG 1/100 MSN-06S Sinanju Stein Ver.Ka

  • From UC: MSV, the first prototype of the iconic Sinanju- the rough-cut, white Sinanju Stein! 
  • The Sinanju Stein Ver.Ka- an almost pure-white Suit, the Sinanju Stein was designed using data from both the v Gundam and the Sazabi. This unparalleled combination of two of the most powerful Suits from the Universal Century has lead to a Suit with unique proportions and features designed to optimize performance. Of the 22 runners included with the Stein, 15 are completely new, and created for this kit. 
  • Includes marking decals created by Mr. Hajime Katoki, designer of this Suit. 
  • Gundam Unicorn-style Forearm mounted Beam Saber mounting system is included
  • Thruster unit mounted on backpack, can be locked using link arms to enable greater range of movement with the shoulder armor. 
  • Adopts the emotion manipulator for fully posable fingers, and weapons feature a double locking mechanism to hold them firmly in place from both sides.
  • Armed with Beam Rifle, bazooka, and more! 
  • Leg thruster units on the legs linked with connector arm.
  • Known as the return of the -  ??Red Comet, -  ?? Full Frontal's MSN-06S crimson Sinanju started out as the Sinanju Stein- a white prototype that pushed the boundaries of human endurance! 
  • Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
  • Joint for Action Base 1, Figure (standing, seated)

RM270.00
img
SAVERM359.90

MG 1/100 RX-93 Nu Gundam Ver.Ka Titanium Finish

  • Bandai really challenged itself with this kit- just one year after releasing the MG Full Armor Unicorn Gundam Ver.Ka, they -  ve translated the classic v Gundam into a Ver.Ka!
  • Three years before the Unicorn Gundam tested its mettle against the Sinanju, the v Gundam, piloted by Amuro Ray, dueled Char -  s mighty Sazabi! Realized as a highly detailed kit, this v Gundam was redesigned by Mr. Hajime Katoki, and features a streamlined, powerful shape, transforming Psycho Frame, fully jointed manipulators and a full set of marking decals- expect this to be a beautiful kit! 
  • Moulded with a special -  titanium coating -   to make this Suit stand out! 
  • Accessories: Beam Rifle, Shield, Beam Saber (large), Beam Saber (small),
  • Fin Funnel x6
  • Item Size/Weight : 39 x 31 x 12 cm / 1240g

RM600.00
img
SAVERM22.00

[Gao Gao] 015 MG 1/100 SINANJU Ver.Ka

Daban version of MSN-06S Sinanju Ver.Ka

Brand : GaoGao
Country made : China
Code : 015

Please note that this is not Bandai products

Ver.Ka Series: VI Designed and produced by Katoki Hajime 
Total parts count: 454pcs 

Features an accurate rendition of the Sinanju's distinctive organic appearance. The large backpack unit incorporates a sliding feature that moves the external armor when the thrusters are opened. Leg units incorporate flexible thruster units. Features a detailed cockpit with an opening hatch. The head unit incorporates a linked mono-eye mechanism that moves along with the head. The complex form of the shield is rendered with total accuracy. The inside of the shield has a mounting arm for storage of a beam axe. Shield-mounted grenade launcher can be detached and re-attached to the rifle. Includes individual grenade units. Beam Saber and Beam Axe incorporate large "effect parts" molded in translucent yellow. Includes a detailed history of the Mobile Suit and story, written by the editorial staff of Gundam Ace magazine, which is serializing the Gundam Unicorn novel. Includes Gundam Decal markings. Gold highlights can be rendered either with stickers or optional water-slide versions decals.  

Weight: 1120g

RM128.00
img
SAVERM40.40

P-Bandai Exclusive: MG 1/100 Hi-Nu Gundam Ver.Ka HWS Expansion

P-Bandai Exclusive: Hi-Nu Gundam HWS Expansion

RM179.60
img
SAVERM99.82

MG 1/100 Victory Two / V2 Gundam Ver.Ka

  • MG commercialization hope Ranked # 1! MG V2 Gundam Ver.Ka finally here!
  • The height of the difficulty of the function realizing it was one of the factors that hinder the commercialization. In the 1/60 kit issued to broadcast at that time, the shape becomes the sacrifice in that you have to reproduce the head storage mechanism to the core fighter, it has become the impression of sagging breasts. Elimination of this part was one of the proposition. The coalescence mechanism, and technology developed through the armor extension gimmick designed in such as MG V Gundam Ver.Ka has been utilized. Regarding Speaking of V2 high demand [Assault] [Buster] equipment, is now planned also technology validation toward commercialization in the center of the mounting mechanism of additional equipment. After these processes, it became a carry that finally can be released on 35th anniversary of Gundam.
  • It comes with parts to reproduce the grenade launcher by mounted on the beam rifle. Hand-gun also possible restructuring in the parts retrofit.
  • Head precision fire for the device with the included.
  • V2 Core Fighter 2 aircraft accessories. V2 top fighter and V2 at the same time display allows the bottom fighter.
  • Accessories: beam saber × 2, beam saber (fan), beam rifle, beam shield (PET), V2 core Fighter × 2, twin-type grenade launcher reproduction for parts, Shakti figure (falling), pilot figure × 2

RM170.00
img
SAVERM82.60

MG 1/100 V Gundam Ver.Ka

  • Accessories: 
  • Beam Rifle x 1
  • Beam Saber x 2  
  • Beam Fan x 1 
  • Beam Shield x 1
  • Hexa Core Fighter x 1
  • Fighter Mode Stand Joint x 1
  • Cockpit Figure x 2 (Uso, Junko)
  • Standing Figure x 1 (Uso with Haro)

RM145.00
Malaysia Gundam enthusiasts and fans alike will be delighted to know that the Master Grade (MG) Ver. Ka Gundam models are now available! These models are the latest addition to the BANDAI world-renowned MG Gunpla line, and they are sure to impress. The level of detail and accuracy that has gone into these models is truly impressive, making them the perfect addition to any Gundam collection. The MG Ver. Ka line takes the iconic designs of the Gundam universe to a whole new level of realism.

The MG Ver. Ka Gundam models are made to the highest standards, ensuring that each model is highly accurate and well-crafted. From the intricate details of the weapons systems to the stunning colors, every aspect of these models has been designed with the utmost care. Whether you are an experienced builder or a newcomer to the world of Gundam, these MG Ver. Ka Gunpla models are sure to provide hours of enjoyment and satisfaction. So, why wait? Add the Master Grade Ver. Ka Gundam to your collection today!

In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

Showing 31 - 40 of 40 products