Price Clear







Showing MS ZETA / ZZ GUNDAM product(s)

Showing 31 - 60 of 164 products

img
SAVERM32.60

HGUC 1/144 Ewac-Zack

wikipedia: A reconnaissance variant of the RMS-106 Hi-Zack used during the Gryps Conflict, the Earth Federation Forces' RMS-119 EWAC Zack could also be considered a distant relative of the old Principality of Zeon's MS-06E Zaku Reconnaissance Type. The most visible physical difference between the Hi-Zack and the "Eye-Zack" (as it was sometimes called) was the large radome mounted on its head. This radome was equipped with a passive radar system, allowing the EWAC Zack to monitor enemy forces without giving itself away with active radar signals. The EWAC Zack was also equipped with various additional infra-red, communications, and visual sensors, allowing it to monitor the enemy in a variety of methods. The radome also featured a second mono-eye that ran on a track along the perimeter of its lower side, allowing the pilot to keep a lookout on the ground while flying or jumping overhead. Although the use of radar- and radio-jamming Minovsky particles in battle situations renders such electronic forms of detection useless, the EWAC Zack was often used for pre- and post-combat actions, tasked with acquiring enemy strength, location, and disposition data. Thus, the EWAC Zack was also equipped with four data pods in its backpack, each of which carried recordings of the mobile suit's intelligence data and could be either jettisoned or launched back towards friendly forces. In the case of capture by the enemy, the data in the pods was also encrypted, thus assuring that valuable intelligence would not fall into the wrong hands. The EWAC Zack was also designed for long-range use, equipped with a pair of external fuel tanks for extended flight times. Although typically unarmed, the EWAC Zack could also be equipped with the weapons normally carried by a Hi-Zack, if necessary. The EWAC Zack was originally built and operated by the Earth Federation Forces, but the invasion of Earth by Neo Zeon during the First Neo Zeon War resulted in several of these units being captured by the enemy. At least one unit was also captured by the African Liberation Front rebel group, operated as part of their "Blue Team" and painted in their distinctive light blue-on-blue colors. Source:http://gundam.wikia.com

RM63.30
img
SAVERM27.94

[193] HG REVIVE 1/144 Gundam MK-II (A.E.U.G.)

  • The fourth HG REVIVE release is the AEUG's white Gundam Mk-II from Mobile Suit Zeta Gundam! 
  • A complete resculpt for the new format further refines its proportions. Its elbows and knees are double-jointed for extreme flexibility. 
  • Includes shield, bazooka, vulcan pod, and more!

RM62.00
img
SAVERM34.60

P-Bandai Exclusive: HGUC 1/144 RMS-179 GM II Semi Striker

The close-combat GM II from Mobile Suit Gundam Unicorn is here as a P-Bandai HG! The kit features improved leg armor as well as new shoulders and a fixed shield on the left forearm, and the distinctive Striker twin beam spear is included as well! The beam sabers can be removed from the spear and used individually, and a shield and beam rifle are also included!

RM115.30

P-BANDAI Exclusive: MG 1/100 Hyaku Shiki Kai

P-Bandai HYAKU SHIKI MP LTD (MG)

RM350.00
img
SAVERM35.80

[200] HG REVIVE 1/144 - Hyaku Shiki

- Memorial items appearance of HGUC series No.200! The eagerly-awaited HGUC hundred expression is nascent REVIVE!

- [Mobile Suit Gundam Z] in dominating hundred formula appeared become a nascent HGUC as the aircraft of Quattro Bajina. Distinctive gold color is reproduce the animation of the image in metallic molding color. In proportions and the latest range of motion of the best balance, posing can also be reproduced in high-dimensional.
- Reproduce the armor of gold in the metallic molding color!
- Pattern of the camera eye is the selection formula by the foil seal. (Usually dual eye-scanning line)
- Adopt a range of motion of the latest format to various places in order to reproduce the action poses.
- Clay bazooka is possible suspension in a backpack.
- `` Hundred characters marking seal specification. Also color, such as a vernier and power pipe reproduced in molding color.
- Beam portion during use in the beam saber of the lower back is removable is reproduced in clear plastic.

- Accessories: beam rifle, clay bazooka × 2, beam saber × 2 (beam blade included)

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size : 29.8 x 18.8 x 6.6 cm

RM72.00
img
SAVERM28.20

P-Bandai Exclusive: 1/144 AMX-004-3 PLE Two's Quebeley MK II

P-Bandai Exclusive: 1/144 AMX-004-3 PLE Two's Quebeley MK II

RM141.80
img
SAVERM130.00

Daban MG 1/100 PMX-003 The-O

[Daban] 1/100 PMX-003 THE O (MG)


Series: Mobile Suit Gundam Zeta
Grade: Master Grade (MG)
Manufacturer: Daban
Scale: 1/100

Please note that this is NON-Bandai product

RM170.00
img
SAVERM74.70

RE/100 AMX-107 Bawoo

  • - The first three-dimensional in the 1/100 scale ZZ Gundam fan long-awaited bow

  • Also be realized movement of the original gimmick of RE / 100 bow to the left and right of the lumbar region while having the coalescence mechanism.
  • Commercialization and sharp design that conforms to the UC version set
  • Both by RE / 100 own gimmick, the movable mechanism of coalescence and lumbar
  • Realize the RE / 100's first modification coalescence gimmick! RE / 100's first modification coalescence gimmick. With fewer assembly steps, the reproducibility of the separation deformation mechanism.
  • Marking of [Hiryu] of the front armor is reproduced in Tetoron seal.
  • Accessories: beam rifle, beam saber x 2, shield, missile x 2

RM135.00
img
SAVERM91.60

MG 1/100 AMX-004-3 Qubeley MK-II (Ple-Two Custom)

  • - Careful color reproduction allows for accurate color separation! 
  • - Features non-scale Ple-Two figure.
  • - Includes Beam Saber in converged and tri-pronged styles.
  • - Decals inspired by Ple-Two.

RM148.00
img
SAVERM119.40

P-Bandai Exclusive: MG 1/100 RMS-179 GM II

P-Bandai Exclusive: 1/100 RMS-179 GM II

RM179.60
img
SAVERM124.90

[Limited Edition] RG 1/144 Zeta Gundam (GFT. Ver.)

RG 1/144 Zeta Gundam 3 Ver. GFT (LIMITED)

RM274.10
img
SAVERM44.70

P-Bandai Exclusive: RE/100 Rebawoo

  • P-Bandai Exclusive: RE/100 Rebawoo

RM255.20
img
SAVERM92.00

P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)

P-Bandai Exclusive: RG 1/144 MSZ-006-3 Zeta Gundam Unit 3 (Karaba's Custom)

RM207.90
img
SAVERM110.00

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]

Reissue Date : Feb 2020
Estimate Delivery : Mar 2020

P-Bandai Exclusive: MG 1/100 Z Gundam Unit 3 B Type [Gray Zeta]
  • Product is Pre-Painted Plastic, No paint Required
  • Product is a Plastic Model Kit, Assembly Needed

RM390.00
img
SAVERM35.80

[203] HGUC 1/144 Zeta Gundam (High Acceleration)

HGUC 1/144 Zeta Gundam (High Acceleration)

  • Estimate Arrival: Late June 2017
  • Towards the Gundam 40 anniversary `GUNPLA EVOLUTION PROJECT` start-up! The first step is HG brand than Zeta Gundam appeared !!
  • Of this time EVOLUTION POINT (evolution point) [action]!
  • And the best proportions in each form, within the constraints to adopt a replacement deformation mechanism of the wave rider, the pursuit of `` moving, realized poses close to the drama in the image!
  • Gekichu just like the dynamic action poses is possible!
  • Replacement deformation in the wave rider form
  • HG highest ever level of range of motion in a variety of poses is possible !!
  • Reproduce the best proportions in each form in the latest format
  • `Is the EVOLUTION POINT` by a movable gimmick that has been built in various parts of the range of motion, which was realized in the [action], it can be conventional more than posing representation!
  • Replacement deformation mechanism of the wave rider
  • To pursue the proportion of as aircraft, taking into account the ease and strength to make. Reproduce the hold up arms.
  • Chest, reclassified, such as the base parts for wave riders limbs. It can be modified with a small remainder parts. ※ existing HG comparison
  • The new color reproduction
  • Camera eye in clear parts specification, reproduce the color of the details. Also reproduced color of the beam saber.
  • Rich armed shipped
  • Comes with a variety of armed was used in the movie, such as Hyper-Mega-launcher of large weapons.
  • Arm of the grenade launcher is also reproduced.
  • Accessories: beam rifle × 1, arms grenade launcher (left and right) × 1 each, hyper-mega launcher × 1, beam saber × 2, shield (including grenade launcher) × 1, for Wave Rider joint × 1 equation

RM72.00
img
SAVERM103.80

RE/100 AMX-103 Hamma-Hamma

The mysterious silhouette at the Gundam Expo has now been revealed! The highly anticipated Hamma-Hamma is now part of the RE/100 series! From the original ZZ Gundam, Hamma-Hamma is sculpted with excellent details and proportions. The flexible arm has a large number of gimmicks including the utilization of soft materials and lead wiring to reproduce long-range attacks! Hamma-hamma's shield with mega-particle gun is accurately reproduced and has meticulous detailing, even in the underside. Set includes shield with mega-particle gun, two beam sabers, space eye, and arm display seat x4. Runner x19. Sticker sheet x1.

Accessories:
· Shield with mega particle gun x 1
· Beam · saber x 2
· Spacemain x 1
· Arm display pedestal x 4

RM165.80
img
SAVERM131.40

MG 1/100 ZZ Gundam Ver.Ka

MG 1/100 ZZ Gundam Ver.Ka



- The long-awaited MG Double Zeta Gundam Ver.Ka finally appeared!

- A wide range of motion of each part and installation of a core / block system, realization of deformation to each form!
- Shoulder joints are provided with multiple movable axes, securing a movable range that can reproduce action pauses like Double Zeta Gundam.
- The knee joint makes full use of the latest know-how, reproducing deep [bending] while reproducing complex deformation.
- By adopting the 3 axis structure which was not so far in the lumbar region, it is possible to [twist of waist] [bend forward] while having the deformation function.
- It can be transformed into each form such as G Fortress. Adjust the structure and shape of each part to the limit, pursue a form that seems to be aircraft that eliminated the remnants of humanoids.
- Two core fighters are included, and the union scene of the opening can be reproduced.
- Added [Extra Finish] processing to some parts, adding a dignified feeling that can not be produced with molded articles alone.
- By placing lining parts in places without frames, high detail appearance is realized even when deformed.

- accessories
* Double beam . rifle x 1
 Hyper . Beam . Saber x 2
 Hand grip (right and left) x 1 each
 Saber hand (left and right) x 1 each
 Hand for transformation (right and left) x 1 each
*  Weapon possession (right) x 1

- Product content
 Molded article x 17
 Foil seal x 1
 Water transfer type decal x 1
 Instruction manual x 1

RM228.00
img
SAVERM20.00

P-Bandai: HGUC 1/144 RX-124 Gundam TR-6 (Woundwort) [Reissue]

P-Bandai: HGUC 1/144 RX-124 Gundam TR-6 (Woundwort)

First Release Date : June 2018
Reissue Date : Dec 2019
Estimate Delivery : Jan 2020

[ACCESSORIES]
  • Composite Shield Booster
  • Action Base x 2

RM130.00
img
SAVERM78.20

P-Bandai: HGUC 1/144 Zssa

P-Bandai: HGUC 1/144 Zssa [REISSUE]

Release Date: August, 2018
Estimate Delivery Date: September, 2018

RM141.80
img
SAVERM30.00

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts

P-Bandai: MG 1/100 RX-121 Gundam TR-1 Hazel Shield Booster Parts


Kindly note that this product is only the add on parts for MG 1/100 Gundam TR-1 Hazel Custom. Which do not include the Gundam TR-1 Hazel Custom.

RM100.00
img
SAVERM17.90

[05] SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM

SD GUNDAM CROSS SILHOUETTE ZETA GUNDAM


- Zeta Gundam, the protagonist of [Mobile Suit Z Gundam] appears in the series that can enjoy two silhouettes [SD Gundam Cross Silhouette] series!

- Reproduce distinctive coloring.
- Combined with [SD Gundam Cross Silhouette Frame] (sold separately), it is possible to upgrade high head and improve mobility.
- [Z Zaku] that appeared in [ZZ Gundam] in combination with [SD Gundam Cross Silhouette Zaku II] can be reproduced.

- accessories
Beam rifle x 1
* Shield (grenade launcher) x 1
* Beam * saber x 1

- Product content
* Molded product x 3
* Foil seal x 1
* Instruction manual x 1

RM42.00
img
SAVERM20.00

P-Bandai: MG 1/100 GM Cannon [Red Head]

Bandai Spirits announced the release of the Premium Bandai MG GM Cannon in Jaburo Defense Force colors from Mobile Suit Z Gundam series!

The kit is based on the MG 1/100 GM Ver. 2.0 that includes parts for the GM Cannon.
This version also comes with "'The Immortal 4th Team' Color" red arms for its variation.

A sheet of water slide decal is also provided for detailing.

[ACCESSORIES]

  • 240 mm rocket cannon
  • Beam spray gun
  • Hyper bazooka
  • Beam rifle
  • Shield

RM260.00
img
SAVERM223.90

MG 1/100 FAZZ Ver. Ka

-From [Gundam Sentinel], FAZZ is three-dimensional with MG Ver.Ka!

-Under the supervision of Hajime Katoki, armament and additional armor are composed with new interpretations. Pursuing proportions that do not become dull while maintaining a profound feeling.
-Uses a movable roll for the forearm to achieve a wide range of movement. When the arm is raised horizontally, it is structured to move in conjunction so that the additional armor does not interfere.
-When raising the legs, additional armor of the front armor is deployed upwards to ensure a range of motion.
-Missile pods loaded in various places are reproduced with interpretation unique to Ver.Ka. You can also open and close the hatch manually and enjoy the built-in missile display.
-Includes Ver.Ka decals that include different chest numbering. The FAZZ platoon in the work can be reproduced.

[accessories]
  • Double beam rifle x 1
  • Hyper Mega Canon x 1
  • Water transfer decal x 1
  • Foil seal x 1

RM435.00
img
SAVERM129.40

MG 1/100 GM II (A.E.U.G COLOR Ver.)

  • MG 1/100 GM? (A.E.U.G COLOR Ver.)
  • Premium Bandai continues the release of the GM units with the AEUG colors of the GM II from the Mobile Suit Z Gundam in Master Grade series. 
  • The kit shares the same molds with the previously announced P-Bandai kit of MG 1/100 GM II. This kit also uses the Ver. 2.0 inner framing technology for better articulation.
  • The kit is completed with its beam rifle, one beam saber, and a shield. A Dedicated water slide decal sheet is also provided for detailing.

RM260.00
img
SAVERM154.40

P-Bandai: HGUC 1/144 Gundam TR-1 [Haze-thley]

The Gundam TR-1 [Haze\'n-thley] is a concept mobile suit that first appeared from the Advance of Zeta series. 
The unit features combined equipment and armor parts of Gundam TR-6 [Haze\'n-thley II-Rah], Gundam TR-6 [HAZEL II] / Woundwort, and Gundam TR-1 Hazel Custom in one Mobile Suit.
The kit also features upgraded parts for the old HGUC kit which is now sharing the same molds and materials with the Premium Bandai version of Hazel Custom unit. 
Parts for its head, and chest armor unit are provided with newly molded parts and pieces for this exclusive P-Bandai release.

RM235.00
img
SAVERM6.00

[NO. 17] FG 1/144 RGM-79 GM

  • RGM-79 GM (Gundam Model Kits)
  • Release Date: April 1981
  • Weight: 120Grams
  • The Gunpla only features 15 points of limited articulation on the head, arms, shoulders, and legs.
  • Right arm can swap with either normal right hand or the Beam Spray Gun + Hand piece.
  • Beam Sabers must be removed from the backpack before you replace it with longer versions for the GM.

RM12.00
img
SAVERM25.00

SDBB G-Generation Z Gundam MS Collection

The SD Gundam G Generation Model Series (SDGG) Zeta Gundam MS Collection is a non-scale SD kit released in 2000.

Zeta Gundam
- Beam Rifle
- Hyper Mega Launcher - Bipod
- Beam Saber 
- Shield

Hyaku Shiki
- Beam Rifle
- Clay Bazooka
- Beam Saber

Gundam Titans Version
- Beam Rifle
- Hyper Bazooka
- Shield
- Beam Saber
- Core Fighter front piece

- Core Fighter rear piece (default)
- Core Fighter rear piece (folded)
- Core Booster piece

Zeta Gundam
- The Gunpla features 9 points of articulation consisting of the head, shoulders, legs and pivoting feet.

Zeta Gundam can convert into Waverider mode via parts rearrangement. 
- Bipod can be installed onto the Hyper Mega Launcher for stability.

Hyaku Shiki
- The Gunpla features 8 points of articulation consisting of the head, shoulders, legs, and waist.
- Clay Bazooka can latch on the backpack.

RM82.80
img
SAVERM30.00

HG 1/144 Gundam TR-6 [Haze’n-Thley Ⅱ Rah] (Advance of Z The Flag Of Titans) [Clear Color]

HG 1/144 Gundam TR-6 [Haze’n-Thley ? Rah] (Advance of Z The Flag Of Titans) [Clear Color]

RM338.00
img
SAVERM81.00

DABAN 8801 MG 1/100 MG GUNDAM ZETA 2.0

Daban MG 1/100 Zeta Gundam Ver.2.0 

 Brand : Daban 
Code : 8801
Series : ZZ Gundam 

 Please note that this is not Bandai Product.

RM99.00
img
SAVERM39.80

DABAN 6618 MG 1/100 RMS-108 MARASAI

  • DABAN MG 1/100 RMS-108 MARASAI
  • Brand : Daban
  • Code : 6618
  • Series : ZZ Gundam
Please note that this is not Bandai Product.

RM80.00

Showing 31 - 60 of 164 products