• Home
  • Showing KAMEN RIDER MODEL KITS product(s)

Showing KAMEN RIDER MODEL KITS product(s)

img KAMEN RIDER MODEL KITS

Showing 91 - 111 of 111 products

Quick View
img
SAVERM87.20

[Kamen Rider] Figure-rise Standard Masked Rider Den-O Sword Form & Plat Form

-[Sword Form & Platform] from [Kamen Rider Den-O] lineup to Figure-rise Standard!

Release Date : Jun 2020

Estimate Delivery : July 2020

-You can experience the image in the play of making a sword form via the platform!
-Reproduce the characteristic modeling by fine parts division.
-Includes Dengasher Sword mode. If you separate the tip aura sword and use a clear aura sword, you can reproduce [My Special Moves Part 2].

[accessories]
* Sword form parts x 1 set
* Platform parts x 1 set
* Dengasher Sword Mode x 1
* Aura sword effect x 1
* Hand parts (left and right) x 3 types each
* Rider pass x 1
* Rider pass handle (right) x 1
* Thumbs-up hand (right) x 1
* Figure-rise Effect pedestal x 1
* Aura sword effect pedestal x 1
* Foil seal x 1
* Namer seal x 1

RM122.50
RM122.50 Request Stock
Quick View
img
SAVERM77.60

[Kamen Rider] Figure-rise Standard Kamen Rider Kuuga Amazing Mighty Form & Rising Mighty Parts Exclusive

Release Date: August 2020
Arrival Date: September 2020

Joining the Figure-rise Standard Line is Kamen Rider Kuuga in his Amazing Mighty Form! Kuuga\'s Amazing Mighty Form is brilliantly recreated in model kit form with various color molded parts that also have been engineered to recreate signature poses and movements such as the Mighty Kick and the iconic Thumbs up pose!

This set also includes parts to upgrade the separately sold Kamen Rider Kuuga Mighty to Rising Mighty Form.

[Accessories Included]
- 7 Hands
- Feet effects
- Rising Mighty parts 
- Foil seal
- Display base

RM162.00
RM162.00 Request Stock
Quick View
img
SAVERM67.70

Figure-rise Standard Kamen Rider Hibiki

  • Kamen Rider Hibiki line up in Figure-rise Standard!
  • Thorough reproduction of proportions in the play.
  • Uses a newly developed polarization molding color to reproduce the characteristic suit color. Reflection that changes like a gradation depending on how the light hits expresses the texture.
  • The gradation of the mask part is reproduced by combining the thickness of the clear parts and the sticker attached inside.
  • The sound angle and sound shooting stick (A, Tun) are molded integrally with the hand parts to express the minute expression of the fingertips holding the weapon.
  • Clear-molded effect parts that can be reattached are included at the tip of the sound hammer and blaze.
  • The attached drum effect can powerfully reproduce the deadly technique.

[Accessories]
Figure-rise effect pedestal x1
Sound
hammer stick, sound hammer effect x2 
Sound drum effect x1
Sound angle x1
Wrist parts Decisive hand (right), dedicated sound angle hand (right), sound hammer stick Handle (left and right), open hand (left and right), handgrip (left and right)
Foil seal x1
Tetron seal x1

RM136.00
RM136.00 Request Stock
Quick View
img
SAVERM57.70

[Kamen Rider] Figure-rise Standard Kamen Rider Joker

  • Figure-rise Standard Kamen Rider Joker
  • Non-scale assembled plastic model
  • Target age: 15 years old or older
  • Product material: PS/ABS
  • Figure-rise Standard Kamen Rider Joker Appears!
  • The Kamen Rider Joker that appeared in "Kamen Rider W" is lined up in Figure-rise Standard! Reproduce the characteristic design with new modeling!

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM51.70

Figure-rise Standard Kamer Rider Masked Rider Decade

[Kamen Rider Decade], featuring a variety of optional parts including 26 types of rider cards, is now available in Figure-rise Standard!


- It is possible to assemble the head in the image of a transformation scene by dividing the parts unique to the plastic model.
- Ridebooker can be assembled in 3 types: sword type, gun type, and carrying type.
- 26 kinds of PET rider cards that can be loaded on the belt are included.
- Includes adapter to attach the belt to other Figure-rise Standard Kamen Rider series.
- Neo Decay driver is also included.

[accessories]
- Rider card x 26 types
- Ridebooker (carrying form/gun form/sword form) x 1 each
- Neo decay driver x 1
- Belt adapter x 7 types
- Wrist parts Grip hand (left and right), open hand (left and right), weapon holding hand (right hand), card holding hand (right hand)
- Figure-rise effect pedestal x 1
- Foil seal x 1
- Tetron seal x 1

RM140.00
RM140.00 Request Stock
Quick View
img
SAVERM49.70

S.H.Figuarts Kamen Rider Revi Rex Genome (First Production)

-From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Rex Genome] is now available in SHFiguarts at the first production limited price!

-High quality [SH Figuarts Kamen Rider Revere Rex Genome] that expresses the vivid metallic pink and metallic blue of [Masked Rider Revere Rex Genome] with coloring and also incorporates the gimmick of the belt is now available at the first production limited price!

-From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Rex Genome] will be released at the same time as his partner [Kamen Rider Revice Genome] at SHFiguarts!
-The belt's [Revice Driver] has a built-in movable gimmick, which allows you to reproduce the action of tilting the bi-stamp like a lever and the action of rotating the stamp stamping surface!
-Multiple replacement wrists are attached, and various impressive poses in the work are expressed with SHFiguarts!
-The wide range of motion that SHFiguarts is proud of allows you to take action freely!
-A wrist that can hold the [Oin Buster 50 (Ax Mode / Gun Mode)] that comes with the separately sold [SHFiguarts Kamen Rider Vice Rex Genome] is also included!

[set content]
? Main body
? Replacement wrist left and right 4 types each

RM160.00
RM160.00 Ask Availability
Quick View
img
SAVERM69.60

S.H.Figuarts Kamen Rider Vice Rex Genome

-[Masked Rider Revice Rex Genome]'s companion, [Masked Rider Vice Rex Genome] will be released in the same month as SHFiguarts!

-[SHFiguarts Kamen Rider Revice Rex Genome] will be released at the same time as [SHFiguarts Kamen Rider Revice Rex Genome]! [Oin Buster 50] that can be used not only for the muffler and tail to move, but also for [SHFiguarts Kamen Rider Revice Rex Genome] (sold separately) comes with 2 types of gun mode and ax mode!

--From the 3rd Reiwa Kamen Rider [Kamen Rider Revice], [Kamen Rider Revice Genome], the transformation of [Kamen Rider Revice]'s companion demon, is now available in SHFiguarts !
-Weapon [Oin Buster 50] comes with 2 types of gun mode and ax mode! It is also possible to have it in the separately sold [SHFiguarts Kamen Rider Revice Genome]! Further! [Megalodon by Stamp] is included! [Kamen Rider Revice] series comes with bi-stamps one after another!
-With abundant replacement wrists, you can express the poses of Kamen Rider Vice showing various expressions!
--The characteristic muffler and tail are made of soft material. Since joint parts are also included at the base, you can move freely according to the action!
-[Kamen Rider Vice] that takes free action even in the play is three-dimensionalized with a wide range of motion like SHFiguarts!

[set content]
? Main body
? Replacement wrist left and right 4 types each
? Oin Buster 50 (Gun Mode)
? Oin Buster 50 (ax mode)
? Megalodon by stamp

RM200.00
RM200.00 Ask Availability
Quick View
img
SAVERM17.90

Entry Grade Kamen Rider Saber

Kamen Rider Saber is now available in the introductory series "ENTRY GRADE" for all inexperienced plastic models!
? Because it is a touch gate, you can take the parts by hand with "Petit!"!
? Although the number of parts is simple (about 36 parts), the characteristic color coding of each part is firmly expressed.
? Two types of right hands, a hand holding a sword and a fist, are included, and you can enjoy changing them!
? No adhesive or tools required. The instructions are colored for easy viewing.

RM42.00
RM42.00 Request Stock
Quick View
img
SAVERM58.90

[Kamen Rider] Figure-Rise Standard Kamen Rider Kuuga Mighty Form (Decade Ver.) Model Kit

  • [Kamen Rider] Figure-Rise Standard Kamen Rider Kuuga Mighty Form (Decade Ver.) Model Kit
  • From Bandai Hobby. Collect Kamen Rider Kuuga as seen in the TV series Kamen Rider Decade! 
  • Features Metallic coated parts and new Sealing Sigil stickers. 
  • Includes display stand.

RM132.80
RM132.80 Request Stock
Quick View
img
SAVERM79.60

Figure-rise Standard Kamen Rider Ryuki

Kamen Rider Ryuki appears as the 11th work of the project to make all the main characters of Heisei Kamen Rider into plastic models!

??  The silver part is expressed with an extra finish.
??  The opening of the head slit is realized by ultra-thin molding. The compound eye under the slit is a clear red part, and the characteristic mask is thoroughly reproduced.
??  Five PET advent cards are included. The upper part of the drag visor slides forward and you can load the Advent card.
??  A handle for the card is attached, and the loading image can be reproduced.
??  A drag redder with a total length of about 630 mm is included.
??  By using some parts of the drag redder, sword vent and guard vent can be reproduced. Strike Vent pursues the atmosphere when worn and creates special drag claw parts.
??  Movable joints and a pedestal for drag redders enable a display that imagines the scene in the play.

[Accessories]
??  Drag Redder x 1 
??  Drag
?? Claw x 1
??  Wrist Parts Determinant (Right), Card Handle (Right), Grip Hand (Left and Right), Weapon Holder (Left and Right), Flat Hand (Left and Right)
??  Advent Card x 5 Seed
??  Drag redder pedestal x 2
??  Figure-rise Effect pedestal x 1
??  Foil seal x 1

RM178.00
RM178.00 Request Stock
Quick View
img
SAVERM57.60

Figure-rise Standard MASKED RIDER DEN-O ROD FORM & PLAT FORM

  • Figure-rise Standard MASKED RIDER DEN-O ROD FORM & PLAT FORM

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM59.60

Figure-rise Standard MASKED RIDER DEN-O AX FORM & PLAT FORM

  • Figure-rise Standard MASKED RIDER DEN-O AX FORM & PLAT FORM

RM168.00
RM168.00 Request Stock
Quick View
img
SAVERM59.60

Figure-rise Standard MASKED RIDER DEN-O GUN FORM & PLAT FORM

  • Figure-rise Standard MASKED RIDER DEN-O GUN FORM & PLAT FORM

RM168.00
RM168.00 Request Stock
Quick View
img
SAVERM19.30

Bandai S.H. Figuarts Shinkocchou Kamen Rider 1 (New) 50th Anniversary Ver. Figure (Kamen Rider)

Prototype image. Actual product may vary.
Copyright Ishimori Pro Toei
Full length: approx 145mm.

- In commemoration of the 50th anniversary of Kamen Rider's birth, a new coloring issue 1 has appeared!

- The coloring of the whole body has been renewed in the image of the new Kamen Rider No. 1 in recent years! Special pedestal parts with a logo commemorating the 50th anniversary of birth are also included!

- In the special year of the 50th anniversary of Kamen Rider's birth, the new Kamen Rider No. 1 has appeared with a new coloring that imaged the appearance of recent years.
-Reproduce the glossy metallic green head and brightly colored bust parts that are characteristic of recent appearances!
-Proportions, modeling and movement are the same specifications as [SHFiguarts (true bone carving method) Kamen Rider New No. 1].
-Comes with a pedestal with a logo design to commemorate the 50th anniversary of Kamen Rider's birth!

[set content]
? Main body
? 4 types of left and right wrists for body replacement
? Replacement muffler parts
? Spare antenna parts
? 50th anniversary pedestal parts

RM400.00
RM400.00 Ask Availability
Quick View
img
SAVERM76.70

Figure-rise Standard Kamen Rider BLACK

  • Kamen Rider BLACK is now available in Figure-rise Standard!
  • The knee joint is movable until the calf and thigh come into contact. A powerful action pose that imagines the play is decided.
  • The characteristic red and yellow lines and details such as chest parts are expressed by dividing the parts.
  • Thorough pursuit of differences in texture for each part, such as glossy expression with a glossy mirror finish and extra finish on the silver part.
  • Five types of left and right hand parts with rich expressions and joint parts are included so that you can respond to various action scenes.

[Accessories]
Hand parts x 1 set
Figure-rise Effect pedestal x 1
Joint parts x 1 set
Seal x 1

RM115.00
RM115.00 Request Stock
Quick View
img
SAVERM59.70

[Kamen Rider] Figure-rise Standard Masked Rider Agito Ground Form

  • The long-awaited commercialization of Kamen Rider Agito Grand Form!
[Accessories]
  •  Cross horn deployment parts x 1
  •  Wrist parts Grip hands (left and right), flat hands (left and right), decisive factors (left and right)
  •  Effect parts x 1
  •  Figure-rise Effect pedestal x 1
  •  Foil seal x 1

RM132.00
RM132.00 Request Stock
Quick View
img
SAVERM66.70

[Kamen Rider] Figure-rise Standard Masked Rider Fourze Basestates

  • From Kamen Rider Fourze comes a Forze that has been accurately reproduced in every detail!
  •  It is possible to reproduce special moves and characteristic poses in the play with a wide range of motion.
  •  White and black parts use different molding materials to express the difference in texture between suits and masks.
  •  Reproduce the difference in texture between a glossy head and a suit that suppresses the glossiness by making full use of different molding materials. By adopting an extra finish, the texture of the silver part is thoroughly pursued.
  •  A shading mold is used to reproduce the black lines on the body.
  •  6 types of switches can be attached and detached.
  •  Includes rocket and drill modules and various hand parts that are indispensable for reproducing special moves.

[Accessories]
  •  Rocket module x 1
  •  Drill module x 1
  •  Switch parts x 6 types
  •  Wrist parts Belt grip grip hand (right), grip hand (left and right), flat hand (left and right)
  •  Figure-rise Effect pedestal x 1
  •  Foil seal x 1
  •  Realistic decal x 1

RM125.00
RM125.00 Request Stock
Quick View
img
SAVERM70.60

Figure-rise Standard Kamen Rider OOO Tajadoru Combo

This Figure-Rise Standard kit comes with a number of accessories, such as a miniature attachable Taja Spinner, OOO Driver, and the Taka, Kujaku, and Condor Medals. 

This Figure-Rise Standard Kit also comes with detachable accessories such as back feather wings and additional four sets of posable hands.

RM145.00
RM145.00 Request Stock
Quick View
img
SAVERM63.60

[Kamen Rider] Figure-rise Standard MASKED RIDER KUUGA DRAGON FORM/RISINGDRAGON

When evil comes, a warrior who voids its skills and quells the evil forces like a stream shall also come to be !!!

Also known as the Blue Kuuga, Kamen Rider Kuuga Dragon Form is released in Shinkocchouseihou.
Comes with Dragon Rod, the weapon suited for his combat style based on Chinese martial arts !

RM152.00
RM152.00 Request Stock
Quick View
img
SAVERM139.30

S.H.Figuarts (Shinkoccou Seihou) Kamen Rider W Cyclone Joker Fuuto PI Animation Memorial

-[Futo Detective] In commemoration of the animation, [Kamen Rider W] has been added with new parts!

-[SHFiguarts (true bone carving method) Kamen Rider W Cyclone Joker] has appeared with new cloth muffler parts to commemorate the animation of [Futo Detectives]. The cloth muffler contains a wire and can produce free action. In addition, pedestal parts to commemorate the animation are also included!

-In commemoration of the animation of [Futo Detective], [Kamen Rider W Cyclone Joker] from the SHFiguarts true bone carving method series has appeared with a new cloth muffler and commemorative pedestal parts.
-The new cloth muffler has been commercialized in a size that is inspired by anime production under the supervision of the anime staff. The wire inside allows you to freely express the fluttering of the muffler.
-With the fluttering muffler, you can take a powerful action pose with the image of the new animated [Kamen Rider W] while keeping the movement and modeling of the true bone carving method.
-The gimmicks of Gaia Memory, Double Driver, and Maximum Slot are also followed.
-The muffler (normal) that came with the [SHFiguarts (true bone carving method) Kamen Rider W Cyclone Joker] released in 2016 is also included, and you can enjoy normal actions.

* Please use Soul STAGE (sold separately) to hold the cloth muffler.

[set content]
? Main body
? Replacement wrist left and right 5 types each
? Hard muffler
? Replacement cloth muffler
? [Futo Detective] Animated commemorative pedestal parts

RM280.00
RM280.00 Ask Availability
Quick View
img
SAVERM66.70

[Kamen Rider] Figure-rise Standard Kamen Rider Skull

Kamen Rider Skull from "Kamen Rider W" joins the Figure-rise Standard model-kit lineup from Bandai! His characteristic head is modeled in great detail, with silver-finished parts for an extra metallic feeling. His iconic hat is of course included, along with an extra brim with a rip in it. The Skull Memory can be attached to the Skull Magnum; in addition to the normal mode, the maximum mode can be reproduced by rotating the barrel. A briefcase that can be opened and closed is also included; the Double Screwdriver, Skull Memory and Gaia Memory included with the Figure-rise Standard Kamen Rider W Cyclone Joker (sold separately) can be stored inside. Interchangeable hands are also included. Order him for your own collection now!

[Includes]:

  • Hat (x1 set)
  • Attache case
  • Skull Magnum
  • Skull Memory
  • Joker Memory
  • Joint parts (x1 set)
  • Hand parts (x1 set)
  • Figure-rise Effect Pedestal
  • Stickers

RM125.00
RM125.00 Request Stock

Showing 91 - 111 of 111 products