• Home
  • Showing METAL PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing METAL PARTS product(s)

Showing 91 - 120 of 164 products

Quick View
img
SAVERM3.60

[Metal Part] 4mm Zaku metallic Lens - Orange Colour

  • Diameter: 4.0mm
  • Orange colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
RM2.40 Request Stock
Quick View
img
SAVERM3.60

[Metal Part] 4mm Zaku metallic Lens - Pink Colour

  • Diameter: 4.0mm
  • Pink colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
RM2.40 Request Stock
Quick View
img
SAVERM59.00

[Metal Part] MG 1/100 Sazabi Ver. KA. Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Backpack Main thruster - Red x1drill 2.0mm hole, attached to point with minor cement
2.Backpack Sub thruster - Red x2drill 1.5mm hole, attached to point with minor cement
3.Shoulder thruster - Red x6drill 1.5mm hole, attached to point with minor cement
4.shoulder blade (Central) nozzle x2drill 3.0mm hole, attached to point with minor cement
5.shoulder blade lateral nozzle x4drill 1.5mm hole, attached to point with minor cement
6.armor side waist vent x6drill 2.0mm hole, attached to point with minor cement
7.rear armor vents x4drill 2.0mm hole, attached to point with minor cement
8.Arm vents x4drill 2.0mm hole, attached to point with minor cement
9.Front Leg Vents x2drill 2.0mm hole, attached to point with minor cement
10.Leg Side Vents x2drill 2.0mm hole, attached to point with minor cement
11.Leg Rear Vents x6drill 2.0mm hole, attached to point with minor cement
12.Belly vents x1drill 2.0mm hole, attached to point with minor cement
13.Waist Energy Pipe x1direct
14.Metal join cover (round) x6drill 2.0mm hole, attached to point with minor cement
15.Metal aviation hole x15drill 2.0mm hole, attached to point with minor cement
16.Rear Join cover x2drill 2.0mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
Tools needed for assembling metal parts set:
  • Tweezer straight/angled
  • Modelling kits cutter
  • Metal cutter
  • Metal wire 
  • Plastic model kits cement
  • Magnifying glass

RM148.00
RM148.00 Request Stock
Quick View
img
SAVERM27.50

[Metal Part] MG 1/100 Nu Gundam RX-93 Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Backpack thruster x4drill 2.0mm hole, attached to point with minor cement
2.Upper Calf thruster x2drill 1.5mm hole, attached to point with minor cement
3.Lower Calf thruster x4drill 1.5mm hole, attached to point with minor cement
4.Leg thruster x4Combined with leg thruster to extend thruster effect
5.Vulcan Canon x2drill 1.8mm hole, attached to point with minor cement
6.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Metal leg joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
12.Metal Shoulder joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
13.Armor screw x30drill 2.0mm hole, attached to point with minor cement
14.Armor Aviation port x10drill 1.6mm hole, attached to point with minor cement
15.Metal beads x50drill 1mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM91.00
RM91.00 Request Stock
Quick View
img
SAVERM4.49

[Metal Part] U1 Metallic Black Air Vents / Thruster for Gundam Kit - 8pcs

  • Easy installation
  • Colour : Metallic Black 
  • Inner diameter: 4mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (8 vents)
  • MG F.A. Unicorn Gundam (8 vents)
  • MG Nu Gundam Ver KA (8 vents)

RM13.50
RM13.50 Request Stock
Quick View
img
SAVERM5.85

[Metal Part] Aviation Hole 2.5mm for HG / MG Gundam model kits - 15 units

  • 2.5mm diameter aviation hole.
  • Package include 15 units of aviation hole for modelling kits customization.
  • Thickness : 1.5 mm

RM7.15
RM7.15 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] 3.0mm Flat Head Screw * 30 units

  • Package include 30 units of 3.0 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 3.0 mm.
  • Thickness : 1.5 mm

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM22.18

[Metal Part] Zaku Metal shoulder thorn type ZC1 for HG / MG - 3 units

  • 3 units of zaku metal part shoulder throne type ZC 1.
  • Widest diameter: 9.7mm, length: 16.8mm
  • can fit with MG zaku modelling kits nicely and don't need any cement to be attach on the kit.

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM3.60

[Metal Part] 4mm Zaku metallic Lens - Red Colour

  • Diameter: 4.0mm
  • Red colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
RM2.40 Request Stock
Quick View
img
SAVERM3.60

[Metal Part] 4mm Zaku metallic Lens - Green Colour

  • Diameter: 4.0mm
  • Green colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
RM2.40 Request Stock
Quick View
img
SAVERM12.30

[Metal Part] RG Sinanju Metal Enhancement Part Set

  • [Metal Part] RG Sinanju Metal Part Enhancement
  • Manual is available in the 'more image..' section, in chinese language.

RM127.60
RM127.60 Request Stock
Quick View
img
SAVERM25.90

[Metal Part] PG 1/60 Banshee Norn Metal Enhancement Part Set

  • [Metal Part] PG 1/60 Banshee Norn Metal Enhancement
  • Only contains metal parts and no modelling tools inside.
  • Manual is available in the 'more image..' section, in chinese language.

RM104.00
RM104.00 Request Stock
Quick View
img
SAVERM5.85

[Metal Part] Aviation Hole 2.0mm for HG / MG Gundam model kits - 15 units

  • 2.0 mm outer diameter aviation hole.
  • Package include 15 units of aviation hole for modelling kits customization.
  • Suitable for HG / RG size model kit 

RM7.15
RM7.15 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B5, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B5)

  • Specifications: Maximum diameter 9.5mm, Height 9.0mm, Joint Diameter 2.0mm
  • Thruster Pin : 4.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

    1)Requires drilling works to create a joining point (2.0mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B6, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B6) (2units)

  • Specifications: Maximum diameter 15 mm, Height 12 mm, Joint diameter 2.0 mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
Stainless
    Installation guide:

    1)Requires drilling works to create a joining point (2.0mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C1,Red) (2 Units)

[Metal Part] Blue Metal Thruster Vents (C1)

  • Specifications: Maximum diameter 6.0mm, Height 6.5mm, Joint Diameter 1.5mm
  • 2 units per package

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 5.0 mm Flat Head Armored Screw x 12 units

  • 5.0mm diameter metal part armored screw for armory joints part.
  • Package include 12 units of screw for modelling kits
  • Suitable for MG / RE and PG scales.
  • Thickness : 1.2 mm
  • Joint Part : 2 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 6.0mm Flat Head Armored Screw x 12 units

  • 6.0mm diameter metal part armored screw for armory joints part.
  • Package include 12 units of screw for modelling kits
  • Suitable for MG / RE and PG scales.
  • Thickness : 1.2 mm
  • Joint Part : 2 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM25.60

[Metal Part] Adjustable Metal Piston (2 units) (LARGE)

[Metal Part] Adjustable Metal Piston (2 units) (LARGE)


  • Package include 2 units of Metal Piston for model kits customization.
  • Easy to install
  • Separate into 3 parts
  • Length is adjustable
  • Suitable for 1/100 scales size

RM10.30
RM10.30 Request Stock
Quick View
img
SAVERM196.00

[Metal Part] PG 1/60 Full Armor Unicorn Gundam Metal Enhancement Part Set

  • [Metal Part] PG 1/60 Full Armor Unicorn Gundam Enhancement Part
  • Manual is available in the 'more image..' section, in chinese language.

RM104.00
RM104.00 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] 1.1 mm Flat Head Screw * 30 units

  • Package include 30 units of 1.1 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 1.1 mm.
  • Thickness : 1.5 mm

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM30.60

[Metal Part] MG 1/100 MS-18E Kampfer Metal Enhancement Part Set

MG 1/100 MS-18E Kampfer Metal Enhancement Part Set

It contain 16 types of metal parts for MG 1/100 MS-18E Kampfer to enhance

1. Green Metallic Lens Eye for MG Kamfer x 1
2. Head Vulcan Pod x 2 set
3. Shoulder Thorn Metal Spikes ZC 2 x 3
4. Shoulder Thruster, C1 x 6 set (3 pair)
5. Joining Angle Detailing Enhancement Parts J1  x 4 units
6. Aviation Hole 2.5 mm x 22
7. Chest Part Thruster, C2 x 2 
8. Backpack Main Thruster, C7 x 2
9. Backpack Secondary Thruster, C1 x 1
10. Lower Leg Back Thruster, C7 x 2
11. Lower Leg Front Thruster x 2
12. Calf Part Back Thruster x 2
13. Calf Part Side Thruster, C2 x 2
14. Energy Pipe on Waist x 1
15. Flat Head Screw x 30
16. Aviation Hole 2.0 mm x 15

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package


Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM113.40
RM113.40 Request Stock
Quick View
img
SAVERM21.70

[Metal Part] MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual parts quantity.

Index          Parts                                                               Installation Instruction
1.                  Back Pack Thruster x4                              drill 1.5mm hole, attached to point with minor cement
2.                     Back Skirt Thruster x2                               drill 1.5mm hole, attached to point with minor cement
3.                     Lower Leg Thruster x2                               drill 1.5mm hole, attached to point with minor cement
4.                     Elbow Joint Screw x4                                 drill 2.0mm hole, attached to point with minor cement
5.                     Knee Joint Screw x4                                   drill 2.0mm hole, attached to point with minor cement
6.                     Gatling Gun Muzzle x24                             drill 2.0mm hole, attached to point with minor cement
7.                     Gatling Gun Sight x6                                   Install directly and attached to point with minor cement  
8.                     Gatling Gun Sight Back Cover x6           drill 2.0mm hole, attached to point with minor cement
9.                     Booster Thruster x4                                     drill 2.0mm hole, attached to point with minor cement
10.                   Aviation hole x15                                         drill 2.0mm hole, attached to point with minor cement

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package


Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM80.30
RM80.30 Request Stock
Quick View
img
SAVERM9.60

[Metal Part] MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual parts quantity.

Index         Parts                                                        Installation Instruction
1.                 Back Pack Thruster                               drill 1.5mm hole, attached to point with minor cement
2.                     Elbow Joint Screw                               drill 2.0mm hole, attached to point with minor cement
3.                     Knee Joint Screw                                 drill 2.0mm hole, attached to point with minor cement
4.                     Back Thruster                                        drill 1.5mm hole, attached to point with minor cement
5.                     Leg Thruster                                           drill 1.5mm hole, attached to point with minor cement
6.                     Flat Head Screw                                   drill 2.0mm hole, attached to point with minor cement
7.                     Aviation hole                                          drill 2.0mm hole, attached to point with minor cement

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package


Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM62.40
RM62.40 Request Stock
Quick View
img
SAVERM17.40

[Metal Part] MG 1/100 RGM-96X Jesta Metal Enhancement Part Set

MG 1/100 RGM-96X Jesta Metal Enhancement Part Set

It contain 7 types of metal parts for MG MS-06J Zaku Ver 2.0 to enhance

1. MG 1/100 LED Unit with Battery (Orange) x 1 (Battery include)
2. Aviation Hole for Head Part 3.0 mm x 15
3. Shoulder Thruster, X1 x 3
4. Aviation Hole for Body 1.6 mm x 15
5. Aviation Hole for Body 2.0 mm x 15
6. Metal Silver Bead Ball 1.5mm x 50
7. Flat Head Screw 2.0mm x 30

- Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)

- Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package

Tools needed for assembling metal parts:
- Tweezer straight/angled
- Modelling kits cutter
- Metal cutter
- Metal wire 
- Plastic model kits cement
- Magnifying glass

RM54.60
RM54.60 Request Stock
Quick View
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Brown Colour

  • Diameter: 5.0mm 
  • Brown colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on 1/144 or 1/100 DOM, MG Zaku

RM2.40
RM2.40 Request Stock
Quick View
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Red Colour

  • Diameter: 5.0mm
  • Red colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
RM2.40 Request Stock
Quick View
img
SAVERM42.00

[Metal Part] RE/100 MSN-04II Nightingale Metal Enhancement Part Set

[Metal Part] RE/100 MSN-04II Nightingale Metal Enhancement Part Set

RM198.00
RM198.00 Request Stock
Quick View
img
SAVERM34.80

[DIAN CHANG] Metal Build Alloy Inner Frame for MG Freedom Gundam Ver. 2.0

  • Metal Build Alloy Inner Frame for MG Freedom Gundam
  • The original MG Freedom Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Freedom Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM115.00
RM115.00 Request Stock
Quick View
img
SAVERM10.00

[TLX] Metal Build Alloy Inner Frame for RG 1/144 Hi-ν Gundam Hi-Nu Gundam (TLX-003)

  • Metal Build Alloy Inner Frame for RG Hi-Nu Gundam
  • The original RG Hi-Nu Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast RG Hi-Nu Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM109.00
RM109.00 Request Stock

Showing 91 - 120 of 164 products