Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

The new female version of 30MM (30Minutes Missions) Spinatio is now available in a command specification! This all-in-one item combines armor and weapon parts in addition to the main figure; while taking full advantage of the range of mobility, there's no pinching during assembly. Various weapons such as a chain gun, combat knife and shield are included, and a common 3mm joint structure allows you to combine existing 30MM items with this kit. Order yours now, and build your ultimate army!

[Includes]:

• Chain gun
  
• Shield
• Combat knife
• Hand parts (x5 -- weapon-holding left and right, flat hand left and right, weapon holding right)
• Armor (x1 set)
• Joint parts
  

-From [86-Eighty Six-], a new aircraft [Legin Rave] on which the main characters board is now available in [Long barrel equipment / Missile equipment]!

-A selectable assembly kit that can be assembled by selecting either [long barrel equipment] or [missile equipment].
-Equipped with [sensors] on the left and right sides of the aircraft.
-Equipped with a long barrel specialized for long-range artillery.
-Equipped with [Missile Pod]. The red part on the front of the missile pod is reproduced by dividing it into parts.
-[Heavy machine gun] is attached to the sub arm.
-Compared to the Jaguar Note (sold separately), the armor of the torso and legs has been strengthened, and the volume of the Legin Rave aircraft has been reproduced!
-By providing multiple movable axes at the base of the torso, the joints of the legs, and the armor of the legs, intense actions can be reproduced.
-The movable axis of the back and the drawer structure allow you to move the armament of the back in multiple directions. Each armament on the back can be attached to another aircraft.
-The pile driver at the tip of the leg is also movable and reproduced.
-The wire anchor uses lead wires to create a battle scene. Two types of wire anchor tip parts are included.
-The canopy is equipped with an opening and closing gimmick.
-Reproduce the fine details of the cockpit. Also included is a figure that can be attached to the cockpit.

[accessories]
? Long barrel smoothbore x 1
? Missile pod x 2
? Heavy machine gun x 2
? Sensor x 2
? Lead wire x 2
? Figure x 2
? Marking sticker x 1
? Foil seal x 1
? Action base x 1

-From [86-Eighty Six-], a new aircraft [Legin Rave] on which the main characters board is now available in HG!

-Compared to the Jaguar Note (sold separately), the armor of the torso and legs has been strengthened, and the volume of the Legin Rave aircraft has been reproduced.
-By providing multiple movable axes at the base of the torso, the joints of the legs, and the armor of the legs, intense action can be reproduced.
-The movable axis of the back and the drawer structure allow you to move the armament of the back in multiple directions. Each armament on the back can be attached to another aircraft.
-The pile driver at the tip of the leg is also movable and reproduced.
-The wire anchor uses lead wires to create a battle scene. Two types of wire anchor tip parts are included.
-The canopy is equipped with an opening and closing gimmick.
-Reproduce the fine details of the cockpit. Also included is a figure that can be attached to the cockpit.
-Equipped with a [smoothbore gun] based on the characteristics of the Jaguar notebook.
-[High frequency blade] is attached to the sub arm.

[accessories]
? Smoothbore x 1
? High frequency blade x 2
? Lead wire x 2
? Figure x 1
? Marking sticker x 1
? Foil seal x 1
? Action base x 1

Bandai Plastic Model Kit - Entry Grade PAC-MAN (Crossover with NBA)

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-- This time, PAC-MAN will crossover with NBA and appears in the introductory series [ENTRY GRADE] for all inexperienced plastic models!

-- Because it is a touch gate, the parts are `petit by hand! You can take it as `!
-- No glue or tools required. The instructions are colored for easy viewing.
- Since the color coding is reproduced for each part, you can make a PAC-MAN with a pose just by assembling!

Content include:
- Runners x1
- Stickers x1
- Instruction Manual x1

-[Because I'm the strongest] From the TV anime [Jujutsu Kaisen], Satoru Gojo expands into SHFiguarts.

-Three-dimensional as an action figure with a range of motion to reproduce the pose of the powerful action scene in the play.
-Comes with replacement wrists, facial expression parts, and head parts to reproduce the technique.

-Three-dimensional with modeling and proportions that imaged in the play.
-You can reproduce intense action poses like in the play.
-Includes wrists to reproduce various scenes.

- set content
? Main body
? Replacement wrist left 2 types Right 4 types
? Replacement wrist determination pose
? Replacement facial parts
? Replacement head
? Eyepatch parts

-Continue to record big hit [Detective Conan] The latest version of the movie series will be released! In April 2020, it will be exciting, especially in Conan and Akai!

-Built-in magnet in shoes. The tracking scene on a skateboard with a turbo engine can be expressed!
-Comes with an impressive face in the play. Play with [SHFiguarts Kogoro Mouri] (sold separately) for fun!
-When you find out the key to the incident, ] Comes with facial parts!
-Conan of the tracking scene can be reproduced with eyeglass parts displaying a tracking monitor!
-Comes with facial expression parts with a winking look like Conan!
-Includes detective badge holder!
-Comes with shining eyeglass parts that sometimes show in the play!
-Can be equipped with a wrist-type anesthetic gun.

- set content
? Body
? 3 types of replacement facial parts
- Replacement wrist parts left and right 5 types (including detective batch handle)
? Two kinds of glasses for exchange
? Skateboard with turbo engine

-The leading mecha of the new animation [Sakugan] appears in the ROBOT soul!

-Animated adventure mecha action works selected by [Project ANIMA] aiming to create the next generation! Markbot [Big Tony], which pioneers the undeveloped zone [Labyrinth], is now available as a fully movable model with a total height of about 15 cm!

-Mark bot [Big Tony] operated by the main characters Gaganbar & Memenpu father and daughter is already three-dimensionalized with a fully movable finished product model with a total height of about 15 cm!
-[Big Tony] A full tune-up of a machine called Markbot to develop the undeveloped area [Labyrinth]. Double seat type. In this product, the unique body shape and movement like a heavy machine are fully reproduced.
-Big Tony is designed for long-distance travel and is equipped with a huge backpack on its back. Two engines on both sides of the backpack allow for rapid acceleration and jumps. The appeal of this product is that you can check such various equipment.
-Opening and closing the driver\'s seat is one of the points of this product. You can set a minifigure of Gaganbar and Memenpu inside. You can imagine the size of Big Tony by comparing it with the figure.
-Big Tony can be transformed from a humanoid work form to a moving vehicle form. This product can also reproduce the transformation to the vehicle form. One of the highlights is the characteristic track pattern.
-The anchor wire ejected from the arm is removable and reproduced. You can see that the forearm unit slides upward.
-Since the wire bends flexibly, you can produce a moving pose that matches the image in the play.
-The basic form of the part that hits the hand of Big Tony is originally a drill for rock drilling. With this product, you can select and attach a drill and an open hand.
-Big Tony has many scenes that show flashy action even in the play. We want you to enjoy gimmicks that are different from existing robot figures such as shoulders and knees that have a crank structure.
-The headlamps that look like eyes can produce a variety of facial expressions by using replacement facial parts. The lamp unit can be changed from yellow to red by inverting the front and back.
-The lighting on the side of the driver\'s seat block is reproduced by opening and closing. It can be said that it is indispensable equipment for Big Tony who has many actions in the dark underground.

[set content]
? Main body
? Drill parts x 2
? Anchor wire
? 3 types of replacement facial parts
? Pilot (Memenpu / Gaganbar)

-From the acclaimed TV anime [Jujutsu Kaisen], [PROPLICA Special Grade Curse Double-sided Fetish Finger] is now available!

-The key item that represents the work of [Jujutsu Kaisen], the finger of the King of Curses, Double-sided Inner, is realistically reproduced on a 1/1 scale!
-Thorough reproduction in pursuit of authenticity, including detailed modeling and coloring, and even packaging!
-It is also possible to enjoy playing with a special sticker!

-From [Jujutsu Kaisen], an adult-oriented display model that realistically reproduces the fingers of the curse king, Double-sided Inner, on a 1/1 scale will be released!

[A feeling of size]
-About 1/1 size that reproduces the feeling of size that appears in the play in pursuit of `real feeling`.

[molding]
-Faithfully reproduce the three-view setting of the animation. Realistic reproduction of the terrifying atmosphere of a deadly poisonous monster.
-The characteristic of the fingers of the double-sided swelling is that the swelling part like the root of the tree reproduces the modeling close to the setting even when viewed from various angles.

[Coloring]
-The nails are realistically glossy, and the skin is finished with a dry texture and an eerie color as a [curse].

[Attachment]
-In addition, a sticker that reproduces the [double-sided lodging] that appears by taking the double-sided lodging finger into the body in the play is attached in two patterns. Includes 3 stickers of the same type!

[play]
-If you use the sticker, you can play as a [double-sided lodging]. * Please do not stick for a long time
-With a different pattern of stickers, you can enjoy talking with the main character, the tiger cane, and having a conversation! * Please do not stick for a long time. * Please do not put it in your mouth.
-By lining up with the separately sold [SHFiguarts Yuhito Tiger Cane], you can further enjoy the terrifying world view of [Jujutsu Kaisen].

[package]
-The package is a wooden box-like design with the fingers of the inn.

-set content
? Main body
? 1 set of body stickers (same pattern x 3)

From the anime fighting game My Hero: One’s Justice, the Ichibansho Eijiro Kirishima stands about 9.50 inches tall and is sculpted in his hero suit.

The mighty GaoGaiGar from "The King of Braves GaoGaiGar" gets a new RG-scale model kit from Bandai! It's highly accurate to its appearance in the anime, and it's jointed for a flexible range of motion while keeping its proportions accurate. It's molded in color, so you can achieve a result just like the cover illustration just by assembling it!  It features a newly developed manipulator hand with movable knuckles for natural finger motion; its knees have a wider range of movement now as well. The Stealth Gao attached to its back is equipped with a heat dissipation fin-opening gimmick when the Hell And Heaven move is activated; the Dividing Driver uses metal parts for an accurate texture, with a built-in spring and a telescopic shaft. Effect parts are included for the activation of the Protect Shade, and fixed large hand parts are included for the activation of the Hell And Heaven! Order this amazing robot for your own collection now!

[Includes]:

• Movable finger hand parts (x1 set)
• Hell And Heaven hand parts (x1 set)
• Geiger hand parts (x2 types)
• Joint parts (x1 set)
• Lead wire
• Dividing Driver
• Protect Shade image effect parts (x1 set)
• Realistic decals
• Metallic 3D stickers

• [Size]: Approximately 23cm long when completed

[Includes]:

• Instruction manual (in Japanese)
• Manual booklet (in Japanese)
• Base