• Home
  • Showing MOBILE SUIT GUNDAM product(s)

PRODUCTS

Price Clear







Grade

Brand

Availability

Showing MOBILE SUIT GUNDAM product(s)

img MOBILE SUIT GUNDAM

Showing 31 - 60 of 370 products

Quick View
img
SAVERM127.40

MG 1/100 Musha Gundam MK-II

  • Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  • Its distinguishing design of armor is finely re-created. 
  • It can hold dynamic poses with its plentiful movable parts. 
  • Gold and silver metallic color plating makes gorgeous impression. 
  • Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  • Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 

RM256.00
RM256.00 Add to cart
Quick View
img
SAVERM159.40

MG 1/100 MSN-02 Zeong

  • Pull-out hip and shoulder joints.
  • All joints are movable fingers 10.
  • Mono Movable nozzle head and ears.
  • Refer to the left and right arm stand.
  • Detachable head.

RM224.00
RM224.00 Add to cart
Quick View
img
SAVERM17.80

[114] HGUC 1/144 RB-79 Ball Twin Set

* HGUC release the ball from the set of 2! 
* Ball-inspired style Fasutogandamu version. 
* Appeared in Platoon 08 180mm cannon in addition to the low recoil, comes with twin Fifutinkyariba expression. 
* Comes with display base. 
* The camera reproduced with clear parts. 
* Movable arm portion. 
* Will be set two. 

Accessories: low recoil cannon base × 2,180 mm × 2, twin Fifutinkyariba

RM78.00
RM78.00 Add to cart
Quick View
img
SAVERM206.70

MEGA SIZE 1/48 RX-78-2 Gundam

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

RM290.50
RM290.50 Add to cart
Quick View
img
SAVERM74.70

HG 1/144 Gustav Karl Type 00

The Gustav Karl Type 00 from "Mobile Suit Gundam: Hathaway's Flash" is brought to life in Bandai's "HG (High Grade)" model-kit lineup, equipped with the latest gimmicks and a high range of motion! A movable axis is installed in the arm of the flexible shield on the left shoulder to allow for a variety of poses; the hip joint connection axes of both legs slide to promote bold leg movement. The beam rifle or bazooka can be mounted to its backpack, and the beam saber grip can be stored in the side armor. Order it for your own collection today!

[Includes]:

* Beam rifle
* Beam sabers (x2)
* Bazooka
* Interchangeable hands (x1 set)
* Stickers
* Marking stickers

RM135.00
RM135.00 Add to cart
Quick View
img
SAVERM69.70

[002] RG 1/144 MS-06S Char Zaku II

The second release in Bandai's new "Real Grade" series is Char's Zaku II. Just like the first kit in the Real Grade line, the RX-78-2, the Zaku II packs an amazing level of detail (think MG or PG) into an HG-size kit, complete with dynamic action and moving features. The perfect counterpart to the RG Gundam, the Zaku II comes with the same kind of posable inner frame, piping, and enough markings to keep you busy for some time. Bandai continues to raise the bar.

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM154.40

MG 1/100 G Fighter (Operation V Model For Gundam Ver.2.0)

Bandai Master Grade (MG) 1/100 G Fighter (Operation V Support Craft for Gundam Ver.2.0)

Add versatility to your Universal Century display with the Master Grade 1/100 G Fighter. Designed specifically to pair with the MG RX-78-2 Gundam Ver.2.0 (sold separately), this heavy support craft replicates the modular transformation systems seen in the original Mobile Suit Gundam anime.

Key Features:
- Multi-Mode Combinations: Designed to integrate with the MG RX-78-2 Gundam Ver.2.0 and its Core Fighter to form classic configurations, including G-Armor, G-Bull, G-Bull Easy, G-Sky, G-Sky Easy, and Gundam High-Sky.
- Functional Gimmicks: Features an opening cockpit canopy, positional mega particle cannons, and detachable landing gear to display the craft in flight or parked.
- In-Scale Figures: Includes 1/100 scale figures of pilots Sleggar Law and Sayla Mass in both standing and sitting poses.
- Display Support: Comes with adapter parts to assist in mounting the heavy fighter or its combined forms onto action bases (bases sold separately).

Note: Assembly is required. Snap-fit construction eliminates the need for glue. To utilize the combination gimmicks, the MG RX-78-2 Gundam Ver.2.0 is required and must be purchased separately.

RM217.00
RM217.00 Add to cart
Quick View
img
SAVERM156.90

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM273.00
RM273.00 Add to cart
Quick View
img
SAVERM39.80

[078] HGUC 1/144 MSM-04 Acguy Principality of Zeon Mass Production

MSM-04 Acguy

RM56.00
RM56.00 Add to cart
Quick View
img
SAVERM17.08

SD Ex-Standard RX-78-2 Gundam

SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM29.90

[191] HG REVIVE 1/144 RX-78-2 Gundam

  • Adopting the latest format, both easy assembly and high mobility are realized. 
  • Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  • The range of mobility is greatly improved as well as the number of movable joints is increased. 
  • Powerful poses seen in the anime can be recreated. 
  • Parts are located on the runners under consideration to maximize "easy-assembly". 
  • Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  • The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  • Both vertical and horizontal movement in the waist. 
  • A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  • Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  • Runner x5, Foil sticker x1, Instruction manual x1

RM42.00
RM42.00 Add to cart
Quick View
img
SAVERM69.70

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM99.60

MG 1/100 YMS-15 Gyan

  • From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  • Double hip joints allow wide, sweeping range of motion in the hips. 
  • LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  • Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  • Includes MQuve figure in 1/100 scale and 1/20 scale.
  • Accessories: Beam Sword x1, Shield x1

RM140.00
RM140.00 Add to cart
Quick View
img
SAVERM89.60

MG 1/100 MSM-07 Z'Gok Mass Production Type

MG 1/100 MSM-07 Z'Gok 

RM126.00
RM126.00 Add to cart
Quick View
img
SAVERM104.60

MG 1/100 MS-07B Gouf Ver. 2.0

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  

A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal. This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements.

In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time!

Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.

RM147.00
RM147.00 Add to cart
Quick View
img
SAVERM78.80

1/144 RX-78F00/E Gundam (Glass Feather Equipment) Chemical Recycle Ver.

Bandai Spirits has revealed the GunPla model for the Gundam NEXT Future Pavilion event, running from April 13 to October 13, 2025. This venue will also home the newest 1/1 scale Gundam, the RX-78F00/E, an updated design of the moving Gundam that once stood in Yokohama.

This new version features glass panels on its shoulders, skirt, and leg armor, giving it a more "futuristic" look compared to the original RX-78-2 Gundam. The kit also includes the EX-001 Glass Feather Equipment, a unique addition to the RX-78F00/E model.

Product Features :
- 1/144 Scale
- Made of plastic
- Based on the Mobile Suit Gundam anime series
- Highly detailed

Contents :
- Pieces to build
- RX-78F00/E Gundam
- EX-001 G.L.R.S.S. Feather Unit
- Decal sheet
- Instructions

RM136.80
RM136.80 Add to cart
Quick View
img
SAVERM34.90

[190] HG REVIVE 1/144 Guncannon

  • Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`

  • Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!

  • REVIVE1: characteristic proportions
    By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.

  • REVIVE2: can be bold poses
    You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.

  • REVIVE3: the ease of set and pursue
    Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.

  • REVIVE4: also included parts enhance
    Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.
Accessories: 240mm low recoil Cannon × set, beam rifle, grip hand (left and right), upward smack (left and right)

RM49.00
RM49.00 Add to cart
Quick View
img
SAVERM97.10

MG 1/100 MSM-03 Gogg

  • MSM-03 Gogg (MG)
Finally, a Master-Grade kit of the MSM-03 Gogg, Zeon's mass production amphibious MS! Superb design and tooling by Bandai mean that your Gogg, when built, will be able to stand in just about any pose you might have seen in the Gundam anime! Bandai's inner frame system is highly jointed, with armor parts laid over top of a flexible inner skeleton, making those long arms more poseable than they look.

RM136.50
RM136.50 Add to cart
Quick View
img
SAVERM42.30

[196] HG REVIVE 1/144 Gouf

  • REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  • FUN TO BUILD
  • `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  • BEST PROPOTION
  • REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  • OPTION
  • The main armament of Gouf also abundantly included!
  • Heat rod can be bent freely, a variety of poses is to be able to!
  • Heat saber can be stored in the shield.
  • Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack

RM59.50
RM59.50 Add to cart
Quick View
img
SAVERM136.90

[034] RG 1/144 Zeong

[READY STOCK] 


To commemorate the 40th anniversary of Gunpla, [Zeong] from [Mobile Suit Gundam] has been converted to RG with the latest technology and design!

-In order to reproduce the mechanism on the setting and the pose in the play, the original gimmick based on the actual machine verification is condensed to 1/144.
-Built-in [Advanced MS Joint]. Achieves both smooth and powerful expression and detailed details.
The mono eye can be moved to the left and right according to the movement of the neck. It can also be moved up and down manually.
-Built-in frame with a wide range of movement at the waist. Allows for more dynamic poses.

Four vernier on the chest and back are deployed in conjunction with the front-back movement of the chest.
-Each large and small vernier can be moved greatly individually by expanding the skirt part.
-The hand parts are insert-molded to reproduce precise details and movable joints.
-Reproduce the arm wired mega particle cannon by removing the forearm and attaching the lead wire.

[accessories]
* Display base x 1
* Lead wire (red) x 1* Lead wire (black) x 2* Realistic decal x 1

RM192.50
RM192.50 Add to cart
Quick View
img
SAVERM2.00

GaoGao Daban HG 1/144 RX-78-2 Gundam [Beyond Global]

GaoGao Daban HG 1/144 RX-78-2 Gundam [Beyond Global]


Brand : GaoGao
Series : Gundam Mobile Suit
Model : RX-78-2 Beyond Global Version

Please note that this is not Bandai product

RM26.00
RM26.00 Add to cart
Quick View
img
SAVERM250.00

DABAN PG 1/60 UNLEASHED RX-78-2

Daban PG Gundam Unleashed RX-78-2 Model Kit

Brand : Daban
Grade : PG
Scale : 1/60
Series : Mobile Suit Gundam
Material : ABS
Box Size : 62.5×40×13cm

Includes :
- Body Kits
- Water Slides
- Others Accessories

Please note that this is NOT Bandai product


RM300.00
RM300.00 Add to cart
Quick View
img
SAVERM50.00

Mecha Ark 1/100 Dominant Titan (Messer Comander) Plastic Model Kits

Mecha Ark 1/100 Dominant Titan Plastic Model Kits

Model Brand : Mecha Ark
Model Height : 25cm
Some parts are pre-painted

Please note that this is Non-Bandai product

RM168.00
RM168.00 Add to cart
Quick View
img
SAVERM2.20

GaoGao HG 1/144 RX-78F Ex-001 G.L.R.S.S Feather Unit

HG 1/144 RX-78F Ex-001 G.L.A.S.S Feather Unit

Brand : GaoGao
Grade : High Grade
Scale : 1/144
Series : Mobile Suit Gundam

Please note that this is Non-Bandai product

RM35.80
RM35.80 Add to cart
Quick View
img
SAVERM15.10

Chonker Fat Boy Model Magnetic Middle-aged RX-78-2 Assembly Model Kit with Base

Chonker Fat Boy Model Magnetic Middle-aged RX-78-2 Assembly Model Kit with Base

Brand : Chonker Fat Boy Model
Magnetic assembly model figurine representing a middle-aged, overweight character from the original series.
Decorated floor area with stickers and decals

Please note that this is Non-Bandai product

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM105.60

1/144 RX-78F00/E Gundam (Glass Feather Equipment)

Bandai Spirits has revealed the GunPla model for the Gundam NEXT Future Pavilion event, running from April 13 to October 13, 2025. This venue will also home the newest 1/1 scale Gundam, the RX-78F00/E, an updated design of the moving Gundam that once stood in Yokohama.

This new version features glass panels on its shoulders, skirt, and leg armor, giving it a more "futuristic" look compared to the original RX-78-2 Gundam. The kit also includes the EX-001 Glass Feather Equipment, a unique addition to the RX-78F00/E model.

RM110.00
RM110.00 Add to cart
Quick View
img
SAVERM29.90

Entry Grade 1/144 RX-78F00/E Gundam

Bandai Spirits commemorates the grand opening of the Gundam NEXT Future Pavilion in April 2025 with the launch of the RX-78F00/E Gundam as part of the Entry Grade 1/144 GunPla series. Designed for builders of all levels, this kit offers a seamless, tool-free assembly experience—no glue required—making it an ideal choice for both newcomers and seasoned GunPla enthusiasts.

For those looking to enhance their build, the kit is fully compatible with the separately sold Entry Grade 1/144 EX-001 Glass Feather Equipment. This optional add-on elevates the RX-78F00/E’s appearance with a bold and futuristic aesthetic, making it a standout addition to any collection.

RM42.00
RM42.00 Add to cart
Quick View
img
SAVERM36.00

Panda Model 1/100 Gundam RX-78-2（RG 2.0 Ver.)

Panda Model 1/100 Gundam RX-78-2?RG 2.0 Ver.)

Brand : Panda

Scale : 1/100
Grade : RG 
Model : Gundam RX-78-2

This is a [Panda Model] brand RG Ver.20 but scale 1/100 RX-78-2 model.

Features: 
* Legs, hands, and waist can be puffed up
* Eyes are magnetically controlled and light-up

Includes: 
* Water decals
* Stickers
* Magnetic control light
* 1/144 to 1/100 action base adapter

Please note that this is non-Bandai product.

RM129.00
RM129.00 Add to cart
Quick View
img
SAVERM10.00

Cyclops Studio 1/60 King Crab Char’s Z’gok

Cyclops Studio PG 1/60 Char’s Z’gok King Carb Model Kit

Model : Char’s Z’gok
Type : Plastic Model Kits 
Brand : Cyclops Studio Studio
Scale : 1/60
Grade : PG
Height : 31 cm
Material : ABS, POM, PVC

It come with LED lighting and a motor system

RM288.00
RM288.00 Add to cart
Quick View
img
SAVERM10.00

GaoGao RG 1/144 RX-78F Ex-001 G.L.R.S.S Feather Unit Ver. 9RYU Plastic Model Kit

RG 1/144 RX-78F Ex-001 G.L.A.S.S Feather Unit

Brand : GaoGao
Grade : Real Grade RG
Version : 9RYU
Scale : 1/144
Series : Mobile Suit Gundam

Please note that this is Non-Bandai product

RM68.00
RM68.00 Add to cart

Showing 31 - 60 of 370 products

Contact Us