• Home
  • Showing Gundam Parts + CUSTOM PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 31 - 60 of 474 products

Quick View
img
SAVERM15.30

[Metal Part] MG 1/100 Hi-Nu Gundam Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.LED + 2 batteries x1direct installation
2.Vulcan Canon x2drill 1.3mm hole, attached to point with minor cement
3.Backpack + Calf thruster x4drill 2.0mm hole, attached to point with minor cement
4.Shoulder heavyarm screw x4drill 1.0mm hole, attached to point with minor cement
5.Forearm aviation hole x4drill 1.0mm hole, attached to point with minor cement
6.Metal hand joint cover (round shape) x4Direct installation, attached to point with minor cement
7.Chest Aviation hole x2drill 2.5mm hole, attached to point with minor cement
8.Metal knee joint cover (round shape) x4drill 1.0mm hole, attached to point with minor cement
9.Metal knee joint Hydraulic tube (round shape) x4drill 1.0mm hole, attached to point with minor cement
10.Knee and lower aviation hole x8drill 3.0mm hole, attached to point with minor cement
11.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Canon nozzle x1drill 2.0mm hole, attached to point with minor cement
12.Shield Aviation hole x12drill 2.0mm hole, attached to point with minor cement
13.Armor screw x10direct installation, attached to point with minor cement
14.Armor Screw 1.5mm x30drill 2.0mm hole, attached to point with minor cement
15.Armor aviation hole 1.6mm x15drill 1.6mm hole, attached to point with minor cement
16.Armor aviation hole 1.5mm x50drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM88.40
RM88.40 Add to cart
Quick View
img
SAVERM30.20

[Metal Part] RE 1/100 Gundam Mk III Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index        Parts                                                 Installation
1.                Rear Thruster x3                         drill 2.5mm hole, attached to point with minor cement
2.                Backpack thruster - x3                 drill 3.5mm hole, attached to point with minor cement
3.                Calf thruster - x2                         drill 1.4mm hole, attached to point with minor cement
4.                Armor aviation hole x15         drill 2.0mm hole, attached to point with minor cement
5.               Single line Screw x30                 drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
RM73.50 Add to cart
Quick View
img
SAVERM45.20

[Metal Part] RE100 Gundam GP04G Gerbera Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Shoulder thruster x2drill 1.5mm hole, attached to point with minor cement
2.Lower shoulder thruster x8drill 3.0mm hole, attached to point with minor cement
3.Aviation hole on shoulder x3drill 3.0mm hole, attached to point with minor cement
4.Backpack thruster x15drill 2.5mm hole, attached to point with minor cement
5.Aviation hole on armor x15drill 2.0mm hole, attached to point with minor cement
6.Single line screw x30drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM58.50
RM58.50 Add to cart
Quick View
img
SAVERM1.10

ABS Rod 240mm Long (mix 17pcs - circle, square) for DIY customize Model Kit

Material: ABS

Shapes:  Round, Square, Annulus (With Holes), Square (With Holes)

Package Contents :
-----------------------
Round rod
1. Diameter : 0.5mm+- ,Length : 24cm+-
2. Diameter : 1.0mm+- ,Length : 24cm+-
3. Diameter : 2.0mm+- ,Length : 24cm+-
4. Diameter : 3.0mm+- ,Length : 24cm+-
5. Diameter : 5.0mm+- ,Length : 24cm+-

Square rod
1. Diameter : 1.0mm+- ,Length : 24cm+-
2. Diameter : 1.5mm+- ,Length : 24cm+-
3. Diameter : 2.0mm+- ,Length : 24cm+-
4. Diameter : 3.0mm+- ,Length : 24cm+-
5. Diameter : 5.0mm+- ,Length : 24cm+-

Annulus (With Holes)
1. Diameter : 2.0mm+- ,Length : 24cm+-
2. Diameter : 3.0mm+- ,Length : 24cm+-
3. Diameter : 4.0mm+- ,Length : 24cm+-
4. Diameter : 5.0mm+- ,Length : 24cm+-

Square (With Holes)
1. Diameter : 3.0mm+- ,Length : 24cm+-
2. Diameter : 4.0mm+- ,Length : 24cm+-
3. Diameter : 5.0mm+- ,Length : 24cm+-

RM13.90
RM13.90 Add to cart
Quick View
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1.5 mm diameter

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 2mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2mm diameter

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM25.90

1/144 System Weapon 009 (Gundam Model Kits)

- Impressive weapon bazooka to equip di-origin Zaku system MS appeared to system Weapon!

- Reproduce the various variations of bazooka that HG Di origin of Zaku system has. HG Char Zaku, is recommended in conjunction with HG high mobility type Zaku II!
- In MS for bazooka type C1 Parts recombinant, B1 type, it can be retrofit to B2 type.
- The bazooka D1 type for MS consists of three parts.
- Other weapon parts, is also included dedicated rack and hand parts.

- Accessories: bazooka type C1, D1 bazooka type, missile x— 2, bazooka B1 -  · B2 customized parts, dedicated rack, hand parts x— set

RM52.00
RM52.00 Add to cart
Quick View
img
SAVERM30.00

Unicorn Perfect Shield for HG & RG 1/144 [BLUE] (Armed Armor DE)

(Kindly note that this is a NON-BANDAI product)

Unicorn Perfect Shield for HG & RG 1/144 [BLUE] (Armed Armor DE)

Brand: Effect Wing

Features:
- 2 x Armed Armor DE in a single package
- Able to transform into Unicorn mode or Destroy mode
- Suitable for HG & RG 1/144 scale kit
- Backpack connector (HG & RG) is included
- Phenex V-Fin is included
- The shield armor is molded based on RG model
- Great parts and colors separation
- 4 different frame colors available [Red, Blue, Green,Yellow] (each sold separately)

RM35.00
RM35.00 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B2, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B2)

  • Specifications : Maximum diameter 6.0mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B3, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3.0mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B9, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (B10, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B11, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM4.60

[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit

Joining Angle Detailing Enhancement Parts

- Maximum diameter : 9 mm 
- Part Long : 3.8 mm 
- Each set got 2 unit enhancement metal part 
- Total 4 sets per pack  

Suitable for Gundam Arm and Leg joining angle customization.

RM10.40
RM10.40 Add to cart
Quick View
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
RM13.20 Add to cart
Quick View
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
RM5.60 Add to cart
Quick View
img
SAVERM12.00

MG Hi-Nu Ver.Ka HS033 Customized Fuel Rod Thruster (1 Pair 2 units)

MG Hi-Nu Ver.Ka HS033 Customized Fuel Rod Thruster (1 Pair 2 units)

Special designed for MG 1/100 Hi-Nu Ver.Ka
Quantity : 1 pair / 2 units

RM48.00
RM48.00 Add to cart
Quick View
img
SAVERM49.00

[Metal Part] RG 1/144 MSN-04 Sazabi Metal Enhancement Part Set

[Metal Part] RG 1/144 MSN-04 Sazabi Metal Enhancement Part Set

It contain 19 types of metal parts for RG 1/144 MSN-04 Sazabi Zaku II to enhance

1. Red Eye Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Shoulder Part Thruster x 3 pair
4. Hydraulic Piston x 4
5. Hand Part - 5.0 mm Flat Head Armored Screw x 4 units
6. Hand Part - 6.0 mm Flat Head Armored Screw x 4 units
7. Main Thruster x 1 Unit
8. Secondly Thruster x 1 Set
9. Side Thruster x 1 Set
10. Bottom Thruster x 1 Set
11. Aviation Hole 1.6 mm x 1 Set
12. Aviation Hole 3.0 mm x 2 units
13. 5.0 mm Flat Head Armored Screw x 2 units
14. Joining Angle Detailing Enhancement Part x 2
15. 6.0 mm Flat Head Armored Screw x 4 units
16. Leg Main Thruster x 1 Set
17. Leg Side Thruster x 3 Set
18. Flat Head Screw 2.0 mm x 1 Pack
19. Metal detailing sticker

RM99.00
RM99.00 Add to cart
Quick View
img
SAVERM25.90

MG Sazabi Ver.Ka / HG Nightingale HS024 Customized Fuel Rod Thruster (1 unit)

Customized Fuel Rod Thruster

Special designed for MG Sazabi Ver.Ka / HG Nightingale HS024

For MG Sazabi Ver.Ka need 1 pair ( 2 units)
For HG Nightingale HS024 need 3 units

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM10.00

RG Hi-Nu Ver.Ka HS030 Customized Fuel Rod Thruster (1 Pair 2 units)

MG Hi-Nu Ver.Ka HS030 Customized Fuel Rod Thruster (1 Pair 2 units)

Special designed for RG 1/144 Hi-Nu Ver.Ka
Quantity : 1 pair / 2 units

RM46.00
RM46.00 Add to cart
Quick View
img
SAVERM-3.70

ABS Pla Plate thinness 2.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 2.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM13.90

30 Minutes Sister Optional Body Parts Type S03 (Color C)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Here's a set of summer-themed optional body parts for your 30MS (30Minutes Sisters) figure model kits from Bandai! These parts are equipped with the 3mm joint common to 30MS figures, so you can swap and exchange these parts with your 30MS figures to give them a refreshing new look for summertime! Order yours now!

[Includes]:

  • Body parts (x1 set)
  • Joint parts (x1 set)


RM34.00
RM34.00 Add to cart
Quick View
img
SAVERM9.00

EW Hyper Mega Bazooka Launcher Expansion Unit for RG RX-93-v2 Hi-Nu

Brand: EW (Third Party)
Scale: 1/144
Grade: RG 1/144

Contents:
- Includes 4 runners in the expansion pack.
- Includes Hyper Mega Bazooka + weapon stand.
- Includes Water Slide Decal.
- Includes 2 types of colors such as Grey + Gun Metal runner.
- Includes assembling manual guide booklet.
- Runners are painted.

Please do take note that this is a Non-Bandai Product.
RG 1/144 Hi-Nu Gundam is sold separately & does not include in the package.
Contains only Hyper Mega Bazooka Launcher Expansion Unit for RG RX-93-v2 Hi-Nu Gundam.

RM52.00
RM52.00 Add to cart
Quick View
img
SAVERM9.90

BANDAI MECHA COLLE Ultraman Series No 06 Science Special Search Party Vellucidar

BANDAI MECHA COLLE Ultraman Series No 06 Science Special Search Party Vellucidar

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM9.90

BANDAI MECHA COLLE Ultraman Series No 11 Magma Riser Model Kit

The Magma Riser from \"Ultraman\" gets a Mecha Collection release from Bandai!  Build a detailed, palm-sized replica of this powerful vehicle, which includes a precisely reproduced jet drill and a movable missile launcher.  Waterslide decals are included for the markings. 

RM20.00
RM20.00 Add to cart

Showing 31 - 60 of 474 products