The "Blue Destiny," a.k.a "Shin-i no Kin-Bacho," rides forth from the new Sangokuden series! Armor can be removed and hair parts can be reversed to transform from normal to berserker mode. Knob on head can be turned to transform eyes from normal to berserker mode. It includes the Shiryu Gokurenso weapon, which can be disassembled into multiple swords and spears.

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
•  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
•  Equipped with a movable core fighter! 
  
•  Includes Stand to display the Core Fighter.
  
•  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

• Item Size/Weight : 19.1 x 13 x 4.8 cm / 98g
  

• Accessories: - Zaku bazooka, Zaku-machine gun, Heat Hawk, shield weapon rack, fist (left), for hand holding rifle (left and right), for hand held saber (right)
  

• The RMS-141 Xeku Eins (Type 3 Armament) is a heavy attack version of the Xeku Eins. Originally intended for attacking and defending space fortresses, this type is armed mainly with projectile weapons. Its main weapon is a large 120mm machine gun with a rate of fire of 360-540 rounds per minute, and it carries roughly 6,000 rounds of ammunition in each of the huge drum magazines attached to its shoulders. The mobile suit is also equipped with a pair of shields that connect to the movable frame mounts in its shoulders, and these shields in turn provide beam saber racks and latches for optional equipment such as clay bazookas, bazooka magazines, and smoke dischargers. This is effectively the standard configuration of the Xeku Eins. The pilots of the instructor corps use this version to wipe out the regular Federation Forces mobile suits stationed at Pezun, and after declaring themselves the New Desides, they continue using it throughout the Pezun Rebellion of UC 0088.
  

RX-78GP02A Gundam GP02A (Type-MLRS) is a prototype general-purpose tactical mobile suit and is a variant of the RX-78GP02A Gundam "Physalis". It is featured in the original design series Harmony of Gundam variations by Hajime Katoki.

Alternate equipments for the Gundam Physalis allow it to function as a heavy assault mobile suit. The nuclear warhead is removed and replaced by a six-tube Multiple Launch Rocket System, or MLRS, with three tubes mounted on each side of the backpack. The rockets in the MLRS are almost the size of a cruise missile, and thus can pack a much larger punch. In mid range combat, it can easily bombard a large area, sweeping down a majority of the enemies so that the normal troops can come in to clean up the remaining enemies easily.
For more conventional firepower, the GP02A can be loaded with a particle generator in place of the nuclear warhead and use the atomic bazooka as a heavy beam bazooka. The firepower of beam bazooka can rival that of a mega particle cannon on a large scale mobile armor such as MA-05 Bigro and the full charge shot is roughly equivalent to that of the massive MA-08 Big Zam.

However, none of the aforementioned equipment is used as the GP02A is stolen by Zeon ace Anavel Gato and then used to disable or destroy 2/3 of the Federation space fleet at Konpei Island. The GP02A is later destroyed in a heated battle with the GP01Fb Gundam Zephyrantes Full Burnern.

Art of this kits:

[076] HGUC 1/144 MS-14A Gelgoog / MS-14C Gelgoog Cannon

- Successor to the popular Asshimar, Mobile Suit Gundam Unicorn Episode 5`s Anksha joins the ever-expanding HG lineup!

- Appearing in the upcoming Mobile Suit Gundam Unicorn Episode 5, this massive Suit features a transformation mechanism and huge mounted weapons!
- Transforming gimmick utilizes a replacement system to shift into the disc-shaped MA form.
- Includes dedicated display stand to display in MA or MS form. Other suits can utilize MA form as a sub-flight system, adding another layer of play with this massive HG!
- Deployed in 0096 as a support unit, the EFF-fielded Anksha improves on the older Asshimar designs to provide support and mobility to the Jegan units. A conceptual machine, the Anksha can shift into a mountable high-speed sub-flight system for aerial maneuvers.

- Accessories: 

• Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  
• August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  
• With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  
• Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  
• Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  
• Rear leg armor enables better range of motion in the ankle joints. 
  
• Includes paintable material for the internal structure for easy detailing.
  
• Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka
  

• A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  
• With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  
• Inner frame designed to accommodate a wide variety of Zaku designs.
  
• Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  
• ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  
• Inner frame features a shell for the massive shoulder armor.
  
• Outer shoulder armor is recreated with detachable spikes.
  
• Redesigned ankle link boasts improved performance. 
  
• New mobile dual action mechanism improves leg joint performance .
  
• Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  
• Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1
  

- The Crimson Lightning's customized Zaku II makes its long-overdue entrance into the HGUC line! -   

- Zeon ace, major Johnny Ridden's Zaku II's signature shape is recreated as an HGUC kit- its massive shoulder spikes and sweeping calf -   

thrusters accurately molded, using the HGUC Zaku II as a base model.

- Accessories: Zaku Bazooka, Zaku Machine Gun, Heat Hawk

Expand the line followed from char's counterattack, Gundam UC Gundam universal century series lineup! And from the popular "Hathaway's Flash" Finally, hero machine!

• minovsky craft unit deployment
  Open and close the shoulder and chest armor!
  Flight form can be reproduced by minovsky craft unit deployment gimmick!

• major armed base addition is also included!
  Also comes with a display base, beam rifle, beam Saber, and shield as well as the body and garsezon mountable.

• Messer, garsezon included!
  Comes with MS manipulates the hero companions "Messer", save flight system 'garsezon'! You can be boarding!

• eyes switched gimmicks
  By switching the eyes part sides, can be selected without eyes!

• funnelmisail
  Funnelmisail injection effect parts! Can reproduce the firing scenes!

• Bandai's Master Grade (MG) Gundam RX-78-2 is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980! 
  
• Like all the kits in the MG Gundam series, the level of detail is superb and virtually everything moves. 
  
• The panels on the Gundam RX-78-2's legs flip open to reveal internal mechanisms. The head has a panel, too. 
  
• Even the "Core Fighter" cockpit ship can be removed from the Gundam RX-78-2's mid-section. 
  
• Fine mesh parts cover the inside of the chest air intakes for added realism. 
  
• Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit.
  

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700

• The successor to the powerful and ubiquitous Zaku line, the Gelgoog is the next step in mass-produced Mobile Suits! 
  
• Designed with perfectly balanced offensive and defensive capabilities, this is the first mass-produced Zeon Suit to feature beam weaponry, increasing its overall combat performance. 
  

• Accessories: Beam Rifle x1, Under Barrel Grenade Launcher x1, Rifle Bipod x1, Beam Naginata x1, 1/100 Pilot Figure x2 (Sitting, Standing), Antenna x2, Shield x1
  

• This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.
  
• Following on the heels of the Dom kit comes Bandai's Master Grade Rick-Dom. Differences with the first release are a different tail and backpack unit, different soles (of the feet), and new weapons, especially that huge beam bazooka. And of course, all the Master Grade goodies you'd expect are here! 
  
• Fully posable at all joints; extensive internal detail; individually posable finger joints and more. 
  
• Like all Master Grade releases, the kit is molded in color, and features snap assembly. Have fun!
  

• From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  
• Double hip joints allow wide, sweeping range of motion in the hips. 
  
• LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  
• Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  
• Includes M’Quve figure in 1/100 scale and 1/20 scale.
  
• Accessories: Beam Sword x1, Shield x1
  

• From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
  
• Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  
• Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  
• [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  
• [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  
• It can be equipped with a backpack. )
  
• Accessories: Nichirinmaru , Tanegashima Gun, Sankoumaru Jumonji Yari, Denkoumaru Naginata, Folding Screen, Spear Stand x2, Gun/Sword Stand
  

• This is RX-78-2 as it appeared in the PS2 "Mobile Suit Gundam: The One Year War" game. 
• With Bandai's superbly flexible inner frame, over which sharply molded armor is placed, the final product can bend and pose in just about any position you might imagine. 
• Parts are all molded in color and snap together; polycaps make the joints move smoothly. Bolts hold the frame together securely. Dry-transfer decals allow you to add exterior markings with precision.
  

• RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
• Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  
• Suitable for age 15 and above / no abrasive is needed during assemble process.