Price Clear







Showing Gundam Model Kits + MS GUNDAM 00 product(s)

Showing 1 - 30 of 189 products

img
SAVERM12.50

[313] SDBB 00 Gundam Exia

  • GN drive deployment! Change to the Trans-Am mode!
  • New generation real SD pose is decided! ! Action is perfect!
  • It can be equipped with all weapons! !

RM23.40
img
SAVERM17.90

[322] SDBB 00 Raiser

  • Play value packed with a large number of the original gimmick.
  • To Raiser in Gundam + Raiser.
  • Saber mode of GN Sword II is reproduced in clear plastic.
  • It is equipped with an SD of original gimmick (Bird mode Fighter mode Rider mode) three
  • Width of play further expand!
  • Accessories: GN Sword II × 2, GN shield × 2, GN Sword II beam saber mode for parts × 2


RM42.00
img
SAVERM13.90

[334] SDBB 00 Gundam Exia Repair II

  • 00 mobile soldier Gundam final hero it is MS, it is soldier of BB, and solidification.  
  • An impressive development version is attached to the GN drive by the final episode.  
  • SD Gundam original gimmick. An original weapon bundles it. To an original weapon bringing parts only for [gandamuekushia] together.

RM34.00
img
SAVERM154.90

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM234.00
RM234.00 Add to cart
img
SAVERM3.00

GaoGao Daban Gao Gao NG 1/100 GN-003 Kyrios Gunpla

GaoGao Daban Gao Gao NG 1/100 GN-003 Kyrios Gunpla


Brand : Daban
Scale : 1/100
Model : GN-003 Kyrios

Please note that this is NOT Bandai product

RM42.00
img
SAVERM368.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM710.00
RM710.00 Add to cart
img
SAVERM160.10

MG 1/100 Gundam Avalanche Exia

MG 1/100 Gundam Avalanche Exia


Package include
  • GN Long Blade
  • GN Short Blade
  • GN Shield
  • GN Beam Dagger x 2
  • GN Beam Saber x 2
Come with exclusive action base. 
This unit is release as [P-Bandai] product in Non-Asia Countries.

RM241.20
RM241.20 Add to cart
img
SAVERM82.00

[Hobby Star] MG 1/100 Gundam Astraea with water decal

[Hobby Star] MG 1/100 Gundam Astraea

- Made in China 
- Made by Hobby Star
- High Quality 
- MG 1/100 
- Height of Gunpla about 18 cm 
- This product come with Action Base 
- This product come with Dalin Water Decal  
- This product come without LED set 
- need to assembly yourself

RM178.00
RM178.00 Add to cart
img
SAVERM120.00

[Daban] Perfect Grade PG 1/60 Exia Avalanche / Repair with LED

Daban 1/60 Exia Avalanche/Repair


Limited edition including -  

  • PG Exia model kit
  • PG Exia use LED
  • PG Avalanche parts
  • PG Repair parts

Limited stock release

This package does not include Assembly Manual hard copy. Please download the link provided below:

Installation Manual

RM560.00
RM560.00 Add to cart
img
SAVERM99.50

MG 1/100 Gundam Kyrios

L-From [Mobile Suit Gundam OO] [Gundam Curious] to MG based on the latest draft by Mr. Takayuki Yanase!

-In accordance with the original setting, a frame common to MG 1/100 Gundam Dunames is adopted.
-Reproduce the transformation to MA form by frame structure!
-Locked shoulder armor and backpack nose in MA form to enhance form retention and provide a stable display.
-The hand parts reproduce the same deformation mechanism as animation. Hand parts can be bent inward while holding the wireless grip in MA mode.
-The GN beam submachine gun connected to the arm joint is replaceable.
-Wireless grip can be attached to two weapons as set.
-GN shield can be deployed. Furthermore, various poses are possible by rotating the connection.
-GN hand missile unit can be equipped on the arm.

[accessories]

* GN beam submachine gun x 1
* GN hand missile unit x 2
* Wireless grip x 2
* GN beam saber x 2
* GN shield x 1
* Foil seal x 1
* Marking seal x 1
* PP sheet x 1

RM200.00
RM200.00 Add to cart
img
SAVERM601.00

Bandai Tamashii Nations Metal Build gundam dynames repair III R3

[Content Package]
  • Main body - gundam dynames repair III x1
  • GN shield x 2
  • GN bazooka
  • Replacement wrist left and right 4 types each
  • Beam saber effect x 2
  • Beam saber grip x 2
  • Dedicated pedestal set
  • Rear thruster connection arm set
  • GN bazooka joint set
  • GN shield joint Set
  • GN shield cover set

RM999.00
RM999.00 Add to cart
img
SAVERM13.00

[GaoGao] HG 1/144 00-54 00 Raiser + GN Sword III

Third Party Brand HG 1/144 00-54 00 Raiser + GN Sword III

Brand: Third Party Brand
Scale: HG 1/144
Model: 00 Raiser + GN Sword III
Series: Mobile Suit Gundam 00

Please note that this is Not Bandai product

RM28.90
img
SAVERM8.92

[GaoGao] HG 1/144 00-48 Cherudim Fighter GNHW/A Gundam

Third Party Brand HG 1/144 00-48 Cherudim Fighter GNHW/A Gundam

Brand : Third Party Brand
Grade : High Grade
Scale :  1/144
Model: Cherudim Fighter GNHWIA Gundam
Series: Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM26.98
img
SAVERM7.00

[GaoGao] HG 1/144 00-50 Arios Fighter GNHW/M Gundam

Arios Fighter GNGW/M Gundam

Brand: Third Party Brand
Scale : 1/144
Grade : High Grade
Model : Arios Fighter GNGW/M Gundam
Series : Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM7.00

[GaoGao] HG 1/144 00-61 00 Seven Sword Gundam

Third Party Brand HG 1/144 00-61 00 Seven Sword Gundam

Brand: GaoGao
Scale: HG 1/144
Model: 00 Seven Swordig Gundam
Series: Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM13.00

[GaoGao] HG 1/144 00-51 Seravee Gundam GNHW/B

HG 1/144 00-51 Seravee Gundam GNHW/B


Brand: Third Party Brand
Scale : 1/144
Grade : High Grade
Model : Seravee Gundam GNHW/B
Series : Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM10.00

Daban 6622R MG 1/100 OOQ 00 Qan[T] Gundam Quanta Limited Red Ver. (with Water Decal)

[Daban] MG 1/100 Gundam 00 Qan[T] (China Red Version)

Series: Gundam 00
Grade: Master Grade (MG)
Manufacturer: Daban
Scale: 1/100
Version: China Red Special Version

RM108.00
RM108.00 Add to cart
img
SAVERM26.00

Daban 00-09 1/100 Gundam Avalanche Exia

[Daban] 1/100 Gundam Avalanche Exia


Series: Mobile Suit Gundam 00V
Grade: NON-GRADE (NG)
Manufacturer: Daban
Scale:1/100

Please note that this is NOT Bandai product

RM60.00
img
SAVERM23.95

[032] HG 1/144 Gundam Dynames (Trans-Am Mode)

The sharpshooting Gundam Dynames from the first season of "Mobile Suit Gundam 00" takes aim once again in Bandai's HG lineup with the release of this gloss injection-molded kit, which comes molded in colors that mimic its Trans-Am mode color scheme seen in the show! Similar to the 2007-released HG Gundam Dynames but with a different color scheme, it will be articulated with plenty of polycap joints upon completion and will feature foldable GN shields to the front for front guard mode. Its GN sniper rifle can be set up with tripod support and can also be stored on its right shoulder armor. The yellow antenna on its head can be slid down to reveal a gun camera for precision sniping. A sheet of reflective hologram foil stickers is included for detail.


Accessories:
-  GN sniper rifle
- GN full shields x 2
- GN shields x 2
- Beam sabers x2 

RM48.00
img
SAVERM71.88

[018] RG 1/144 Gundam 00 Raiser

  • GW large items following the Exia! Exist beyond the Gundam [Raiser] appeared in the RG!
  • The three-dimensional the Raiser of Real grade unique incorporate a new interpretation, while based on the actual historical research!
  • deep the aircraft characteristics from modern technology
  • Is a characteristic of the aircraft [GN DRIVE] is interpreted as a propulsion engine energy transfer institution. The design of real technology and promotion agencies and high-voltage power transmission line of exploration satellite captured in design.
  • GN DRIVE is fitted with click-type arm of. Can be freely angle adjustment. It is also possible to make the particle storage tank type that appeared in the movie version in the selection formula.
  • Proportion of considering the setting
  • Double O adopted the same Advance de MS joint and Exia is in a high-end models of Exia. While reproduce the successor machine design line in a common joint, and reproduce the distinctive form that is expressed in more Massive.
  • Precision reproduction of Raiser
  • Raiser is equipped with a slide mechanism to wing part, emphasized the linear design-conscious of real stealth fighter. A new interpretation plus actual aircraft in connection part and armed when combined with the body in reference, add a delicate mold.
  • The fully reproduce a variety of armed
  • GN Sword II, GN shield, GN Sword III, GN beam saber is included. Through the joint, can be mounted on the waist or shoulder portion, and the like. And equipped with each armed, sword play action in the play can be reproduced.
  • Each rifle mode, of course GN twin lance form can be replicated. The GN shield concatenates 2 chome, it also possible to braid is equipped on both arms.
  • Accessories: GN Sword II x 2, GN beam saber x 2, GN shield, GN Sword III, riser Sword effect, pilot figure (Setsuna, Suna?)

RM108.00
img
SAVERM72.96

1/100 GN-008 Seravee Gundam

1/100 GN-008 Seravee Gundam

RM142.90
img
SAVERM116.50

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Parts Set Conversion

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Part Conversion

Estimate arrival Late August 2017

Trans-am clear parts for PG 1/60 00 Raiser Trans-AM ver. , which is sold separately.
Clear orange, are provided for the antennas. Molds separated with clear pink, clear green, and clear red.
GN drive exterior parts of both shoulders are not included.  Armored exterior parts such as GN Sword â…¡, GN Sword â…¢, GN Shield, etc. are reproduced with clear parts.
PG 1/60 Special Stand sold with PG 1/60 00 Raiser Trans-AM ver. 
This kit is getting released to celebrate the 10th anniversary of Mobile Suit Gundam 00 anime series.

RM283.50
img
SAVERM20.00

P-Bandai : MG 1/100 Advanced GN-X [REISSUE]

P-Bandai Exclusive: MG 1/100 Advanced GNX


Reissue : Feb 2020
Estimate Delivery : March 2020
  • Accessories: 
  • GN Beam Saber x 1, Proto GN Lance x 1, GN Shield x 1, GN Beam Rifle x 1.

RM270.00
img
SAVERM61.90

NG 1/100 MSJ-06II-A Tieren Ground Type

  • A kit in 1/100 scale to appeal the mechanical detail the type Tieren the ground.
  • Incorporating a new shield is movable up and down shoulder, a more robust representation of the MS. On the surface of the tank aircraft
  • Enforcement of texturing to the image.
  • Step and use the aircraft surface, the bottom of shoes.
  • Comes with a new bazooka. Sensor can be mounted at the bottom of the box. The image of the structure parameters weapon
  • By dividing ー star, directing further reality real weapon. Dedicated to the arm can be mounted in the joint.
  • For the foot takes the mold from real weapons, represent a mold in the ground type. Mono
  • Is reproduced in clear plastic. Under the clear plastic mold is adopted aware of the camera.
  • Movable joint of the arm is aware of the double joint, can be reproduced to smooth the stance of each weapon. Holding the weapon or
  • Comes with a certain facial expression are indispensable to posing palm.

RM105.80
img
SAVERM27.90

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

P-Bandai Exclusive: RG 1/144 Gundam Exia (Trans-Am Mode)

Estimate Arrival: September 2017

RM170.10
img
SAVERM191.20

MG 1/100 Gundam 00 XN Raiser

MG 1/100 Gundam 00 XN Raiser


From the Mobile Suit Gundam 00V side story, the 00 XN Raiser joined the MG lineup! A combination of the 00 Gundam and the XN Raiser, the 00 XN Raiser comes equipped with a pair of GN Buster Sword III units that can be combined into one weapon! The 00 XN Raiser's arm pylons can open and close and can hold the GN Sword II and GN Beam Sword. It is also possible to mount the GN Beam Sword. Four types of battle styles can be reproduced for added display value. Switch between multiple battle modes instantly. One LED unit (green) can be mounted on the head. (2 LR41 batteries required; sold separately). Water-slide decals for added detailing are included. Set includes GN Buster Sword III, GN Sword II, GN Sword III, GN Beam Saber, and GN shield, LED unit, and instructions.

Accessories:
- GN Sword II x 2
- GN Buster Sword III x 1
- GN Beam Saber x 2
- GN Shield x 1 [2 parts]
- 0 Raiser x 1

RM288.00
img
SAVERM150.70

P-Bandai: MG 1/100 Deborah's Advanced GN-X

P-Bandai: MG 1/100 Deborah's Advanced GN-X


Release date: Nov, 2017
Estimate Delivery: Dec, 2017

Deborah's version of the Advanced GN-X is in the 1/100 Master Grade scale and functions as a fully articulated figure once complete. From Mobile Suit Gundam 00V, the Advanced GN-X is painted in a crimson red and comes equipped with an Advanced GN beam rifle, GN beam saber, and GN shield.

RM269.30
img
SAVERM239.00

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]

MG 1/100 OO QAN[T]  (TRANS-AM MODE) [SPECIAL COATING]


From "Mobile Suit Gundam 00 - A wakening of the Trailblazer -",

Double-o'quanta of image which executed Transum appeared in master grade.
Reproduce the red shining airframe by using special coating such as gross injection, extra finish etc.

A water transfer type decal is also newly included.


- SPECIAL COATING

The image of the shining red aircraft at the time of activating Transum is reproduced with special coating. 
Gross injection is used for the pink color armor of the main body etc.
Pearl pink coating is applied to produce a shiny feeling.
The red armored part adopts extra finish processing with metallic feeling.

Metallic colors are used for joints and arms.
 
- DECAL
Adjusted color tone according to transom mode, various markings are newly included with water transfer type decal.

- GN Drive's lighting condition can be reproduced with LED unit (sold separately) mounted!

Attached armed: GN sword V / GN sword bit / GN shield

RM360.00
img
SAVERM288.80

MG 1/100 00 GUNDAM Seven Sword/G (TRANS-AM Mode) [Special Coating]

MG 1/100 00 GUNDAM SEVEN SWORD/G (TRANS-AM MODE) [SPECIAL COATING]


Side story variant of the popular MS 00 Gundam in a limited production Trans-Am variant of the Master Grade Gundam 00 Seven sword with stylish pearlescent red hue over its entire body. This MG kit encompasses total 7 of blades on the mobile suit. It's fully articulated and made with modern plastic.

RM430.00
img
SAVERM90.00

Special Coating : MG 1/100 00 Gundam Seven Sword/G (Third party paint job)

Special Coating : MG 1/100 00 Gundam Seven Sword/G


- Original Bandai product
- Special Coating Version
- Third party paint job

RM450.00
In the year 2307 AD, fossil fuels have all but vanished and the distribution of energy is unbalanced. Humanity now relies on three large-scale solar power systems controlled by three multinational power blocs: the Union of Solar Energy and Free Nations (Union), the Human Reform League (HRL), and the Advanced European Union (AEU). With this nearly inexhaustible source of energy benefiting only these three powers and their allies, constant warfare erupted around the globe among minor countries for precious fuels and energy. Countries whose economy relied solely on the sale of fossil fuels were plunged into poverty and some even believed that the solar power system threatened the promised land of God, resulting in the twenty-year-long Solar Wars. 

Such a chaotic reality has lead to the creation of a paramilitary organization in possession of four highly advanced humanoid mobile suits called Gundams and a mysterious technology known as the GN Drive. They call themselves Celestial Being, and their goal is nothing less than the complete eradication of war through the use of war itself.

Showing 1 - 30 of 189 products