• Home
  • Other Series Kits

Other Series Kits

img OTHERS

Showing 241 - 270 of 618 products

Quick View
img
PO PriceRM340.00

S.H.Figuarts CHAR AZNABLE

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
From Mobile Suit Gundam, the Principality of Zeon\'s ace pilot, the Red Comet, Char Aznable, is now available in SHFiguarts.

The Red Comet, Char Aznable, has finally made an appearance in the SHFiguarts series. While pursuing beautiful proportions, the movable gimmicks have been carefully designed to recreate Char\'s famous scenes. In addition, a wide range of poses and scenes can be recreated with the abundant replacement parts.

From Mobile Suit Gundam, the Red Comet, Char Aznable, has finally appeared in SHFiguarts.
The beautiful proportions recreate the graceful pose that is so characteristic of Char.
Pursuit of a range of motion that allows for the reproduction of impressive poses.
Flexible shoulder movement allows for a variety of poses of Char.
The hip joint extension mechanism allows you to recreate a natural sitting pose!
Dynamic action poses are possible using the included beam gun!
Newtype effect parts allow for a wider range of scene reproductions.
Char\'s distinctive facial expression is reproduced.
Comes with a variety of interchangeable facial parts and interchangeable wrist parts.

[Set contents]
Main unit
?Interchangeable wrist parts: 3 types for the left and 4 types for the right
- 4 types of interchangeable facial parts
?Beam gun
?Gun joint
?Newtype effect parts

- Total height: approx. 155mm
- Material: PVC, ABS

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
Quick View
img
PO PriceRM380.00

S.H.Figuarts Jonathan Joestar

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM380.00
- Deposit RM50.00, Balance RM330.00
- We will inform to make balance RM330.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
This is a posable action figure.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
Quick View
img
PO PriceRM580.00

[Degenerator Insustry] Rakshasa Street Metal Build 1/72 XuChu Mecha

[PREORDER] [PREORDER] [PREORDER] 

Please read all the detail and condition before make order. 

Release Date : SEPT 2022 
Estimate arrival :  OCT 2022 

- Preorder Price RM580.00 
- Deposit RM200, Balance RM380.00 
- We will inform to make balance RM 380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

###############################################################

Brand : Degenerator Insustry
Rakshasa Street Xuchu\r\n??? ??


DEPOSIT: RM200.00
DEPOSIT: RM200.00 Request Stock
Quick View
img
PO PriceRM168.00

[ATK Girl Series] Qingyuan Zhenjun, Yang Yan (Normal Color) 将魂姬 拼装机娘

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  JUN 2022 
Estimate arrival : JULY 2022

- P-O Price RM168
- Deposit RM30, Balance RM138
- We will inform to make balance RM 138.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

[ATK Girl Series] Qingyuan Zhenjun, Yang Yan 
??? ???? [?????????] ???? - ??

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM1700.00

Soul of Chogokin GX-40SP God Mars Chogokin 50th Ver.

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : SEP 2025
Estimate arrival : OCT 2025

- P-O Price RM1700.00
- Deposit RM200.00, Balance RM1500.00
- We will inform to make balance RM1500.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Celebrate the 50th anniversary of Bandai\'s iconic \"Soul of Chogokin\" lineup with this incredible version of God Mars from the 1981-82 anime series! Plated parts have been added to each of the six robots that combine to form a newly gorgeous God Mars; the core robot, God Gaia, is almost entirely plated in color! God Gaia is completely stored in the Majin Sphinx, which becomes God Mars\' body. God Mars comes with the deadly Mars Flash sword, and the Six God Sword with an original Chogokin design. God Mars\' reliable ally, the Cosmo Crusher, a space fighter with a gimmick that can separate and combine into three fighter planes, is also included.

[Figure Size]: Approximately 28cm tall in God Mars form
[Materials]: Die-cast, ABS

[Set Contents]:

God Gaia
Majin Sphinx
Majin Uranus
Majin Titan
Majin Shin
Majin Lar
Cosmo Crusher
Interchangeable hands (x8, left and right)
Myojin Reef (to store God Gaia)
Weapons for Rokushin Robo (x7 types, total of 8)
God Mars\' sword (x2)

DEPOSIT: RM200.00
DEPOSIT: RM200.00 Request Stock
Quick View
img
PO PriceRM320.00

S.H.Figuarts Narumi Gen

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2026
Estimate arrival : MAR 2026

- P-O Price RM320.00
- Deposit RM50.00, Balance RM270.00
- We will inform to make balance RM270.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Narumi Gen from the anime "Kaiju No. 8" joins the "S.H.Figuarts" action-figure lineup from Bandai! He's sculpted with proportions inspired by his appearance in the show; he's supremely posable, too, so you can recreate lots of awesome poses! His large custom weapon is included, which features a transformation gimmick to expand the scope of play. Two interchangeable faces and an interchangeable hair part are also included, so you can display him with his hair pulled back for battle. As a bonus part, an interchangeable face for the "S.H.Figuarts" Kaiju No. 8 is also included! Order him for your own collection today!

[Figure Size]: Approximately 14.5cm tall
[Materials]: PVC, ABS

[Set Contents]:

Main figure
Interchangeable faces (x2)
Interchangeable hands (left and right, x2 each)
Interchangeable hair parts
Weapon
Facial expression for S.H.Figuarts Kaiju No. 8 (figure not included)

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
Quick View
img
PO PriceRM958.00

[PRE-ORDER] [Three Zero] Transformers : The Last Knight DLX Optimus Prime

This is a P-O Product

Please read all the detail and condition before make order. 
Second Release : OCT 2022 
Estimate arrival : NOV 2022

- P-O Price RM958.00 
- Deposit RM240, Balance RM718.00 
- We will inform to make balance RM 718.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Optimus Prime is back at Cybertron and is brainwashed by the villain Quintessa. Quintessa tells Optimus Prime that he must retrieve her staff, and he almost destroys the Earth while retrieving the staff which can absorb Earth’s energy.

Transformers: The Last Knight – DLX Optimus Prime is approximately 11.2 inches (28.5 cm) tall and features approximately 73 points of articulation, with a die-cast metal frame, and LED illuminated eyes.

Accessories include one Blaster Shield, one Detachable Wrist Balde, one Cybertronian Sword, one interchangeable battle mask, a total of four pairs of interchangeable hands, and a DLX Action Stand for various expressive poses.

DLX Collectible Figures present intricate Transformers designs in a smaller scale with high-fidelity production value. With its unique die-cast metal frame design, DLX not only provides an advanced range of articulation, but also greatly enhances the weight and durability. Together with the detailed and weathered paint application of threezero, a remarkable resemblance is achieved in matching the characters as seen in the original media.

DEPOSIT: RM240.00
DEPOSIT: RM240.00 Request Stock
Quick View
img
PO PriceRM480.00

S.H.MonsterArts Godzilla [2000]

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : SEPT 2025
Estimate arrival : OCT 2025

- P-O Price RM480.00
- Deposit RM100.00, Balance RM380.00
- We will inform to make balance RM380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

As seen in 2000's "Godzilla vs. Megaguirus," Godzilla returns to Bandai's "S.H.MonsterArts" action-figure series! The prototype was newly sculpted by Yuji Sakai, and he also handled the coloring and modeling. Mitsuhiko Hosokawa, who created the moving mechanisms of previous "S.H.MonsterArts"figures, has achieved movement with this figure that doesn't compromise the proportions. The new mechanism means the range of movement of the arms and head has been improved -- you can even tilt his head back to recreate the immpressive pose of him watching over the sky from the film! This new figure deserves a place of honor in your collection -- order yours today!

  • [Figure Size]: Approximately 16cm tall
  • [Materials]: PVC, ABS

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
Quick View
img
PO PriceRM150.00

Tekupiku Suguru Gojo -Jujutsu Technical High School-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Suguru Geto from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 
These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 
The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM150.00

Tekupiku Satoru Gojo -Jujutsu Technical High School-

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Satoru Gojo from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM150.00

Tekupiku Yuji Itadori

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Yuji Itadori from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup! 

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM340.00

S.H.Figuarts Metaphor: ReFantazio Protagonist

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The protagonist from Metaphor: ReFantasio is now available in SHFiguarts.

The first in the SHFiguarts [Metaphor: ReFantasio] series. A wide variety of optional parts, such as a [Ride Sword], are included, allowing you to recreate various scenes from the game.

As SHFiguarts is an action figure series, it is possible to recreate a variety of poses.
By using the included riding sword, you can also recreate the long sword riding style.
Two types of interchangeable facial parts are included: [Smiling] and [Combat (mouth open)].
Thanks to the movable structure cultivated in the SHFiguarts series, dynamic battle scenes can be reproduced.
In addition to two interchangeable facial parts, interchangeable wrist parts include three types of left and one type of right, and optional parts include a shoulder bag, sword, riding sword, and a dedicated pedestal set.

[Set contents]
Main unit
- Interchangeable wrist parts: 3 types for the left and 1 type for the right
- 2 types of interchangeable facial parts
- Shoulder bag
- sword
- Ride sword
- Dedicated pedestal set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
Quick View
img
PO PriceRM150.00

Tekupiku Megumi Fushiguro

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM150.00
- Deposit RM30.00, Balance RM120.00
- We will inform to make balance RM120.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Megumi Fushiguro from \"Jujutsu Kaisen\" joins Bandai\'s \"tekupiku\" figure lineup!

These figures each carry a big bag, so they\'ll stand up on their own, and each one has a cute, stylized design that\'ll make you smile every time you see them! 

The neck is movable, too, so the angle of the head can be adjusted. Order yours today!

[Figure Size]: Approximately 10cm tall
[Materials]: PVC, ABS

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM170.00

HeMoXian Reverberation Of Medta - JS-009 Jiu Lian - Plastic Model Kit

HeMoXian Reverberation Of Medta - JS-009 Jiu Lian - Plastic Model Kit

Height:
Base Form: Approx. 15 cm
This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUN 2025
Estimate arrival : JULY 2025

- P-O Price RM170.00
- Deposit RM30.00, Balance RM140.00
- We will inform to make balance RM140.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Armed Form: Approx. 18.5 cm
???? Materials: ABS, PS, Fabric
???? Contents: (25 runner sheets, including 3 with metallic coating)

Main Components

* Jiulian Base Form × 1
* Jiulian Armed Form × 1
* Replaceable [???] Special Helmet × 1
* Fabric Knee Cover × 1
* Alternative Hand Parts × 6 pairs
* Weapon-Grip Hand Parts × 5 pairs
* Facial Expressions × 4, Blank Faces × 5
* Large Chainsaws × 4
* Small Chainsaws × 2
* Meteor Hammer: Starshatter × 1, Replaceable Parts × 3
* Melee Claw Weapons × 2
* Interchangeable Chest Armor × 3
* Water Decals × 2 sheets
* Springs × 2
* LED Light Units × 2, Batteries × 4
* Display Base × 1, Transparent Support Rod × 1, Gray Support Rod × 1, Various Metal Accessories

First Batch Pre-Order Bonus:
* Soft Pink Skin Color Body Parts × 4 sheets
* Soft Pink Skin Color Alternative Hand Parts × 6 pairs
* Soft Pink Skin Color Facial Expressions × 4, Blank Faces × 5
* Exclusive Domestic Bonus: Character-Themed Collectible Transparent Card

DEPOSIT: RM30.00
DEPOSIT: RM30.00 Request Stock
Quick View
img
PO PriceRM340.00

S.H.Figuarts Jotaro Kujo

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2026
Estimate arrival : JAN 2027

- P-O Price RM340.00
- Deposit RM50.00, Balance RM290.00
- We will inform to make balance RM290.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Jotaro Kujo from "JoJo's Bizarre Adventure: Stardust Crusaders" joins the "S.H.Figuarts" action-figure lineup from Bandai! This figure takes full advantage of the "S.H.Figuarts" technology for superior posability, with a focus on realistic anatomical balance in the sculpt and the ability to recreate characteristic poses without deviating from the physical structure. Stamina Digital Coloring is used to bring out his distinctive facial features to the fullest! The flowing hem of his school uniform can be recreated with the wired PVC sheet, and parts are included so he can be displayed with his hands in his pockets! Three interchangeable faces and seven pairs of interchangeable hands are included too. A base with a printed design is included so you can enjoy powerful posing with ease. Order him for your own collection today!

[Figure Size]: Approximately 17cm tall
[Materials]: PVC, ABS, fabric, metal

[Set Contents]:

Main figure
Interchangeable faces (x3)
Interchangeable hands (left and right, x7 each)
Pocket connection parts (left and right)
Dedicated base set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
Quick View
img
PO PriceRM1000.00

Figuarts Zero Touche Metallique Gemini Saga

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : APR 2025
Estimate arrival : MAY 2025

- P-O Price RM1000.00
- Deposit RM200.00, Balance RM800.00
- We will inform to make balance RM800.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Gemini Saga from the anime series \"Saint Seiya\" joins Bandai\'s \"Figuarts Zero Touche Metallique\" lineup! He\'s been recreated with his cape flowing behind him as he prepares to unleash his power; parts of his armor are made with plated parts for a luxurious gleam! Clear parts are used for the flame effect parts on the base and the Galaxian Explosion effect part, bringing you right into the world of the anime! The base is modeled after a collapsing temple, with its stone columns contrasting sharply with the vivid flames. A collection sheet is included. Order him for your own collection today!

[Figure Size]: Approximately 21cm tall
[Materials]: ABS, PVC

DEPOSIT: RM200.00
DEPOSIT: RM200.00 Request Stock
Quick View
img
PO PriceRM800.00

Figuarts Zero Touche Metallique Guts (Berserker Armor)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2026
Estimate arrival : FEB 2026

- P-O Price RM800.00
- Deposit RM100.00, Balance RM700.00
- We will inform to make balance RM700.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Guts in his Berserker armor from \"Berserk,\" the globally popular masterpiece of dark fantasy, is now part of the \"Figuarts Zero Touche Metallique\" lineup from Bandai! Ryu Oyama, an artist famous for his sculptures of creatures, has sculpted Guts in a spectacular form, as seen in the Battle of the Sea God! 

The Dragon Slayer great sword is partially plated for an assertive gleam, and the Sea God\'s tentacles are impressively detailed! 

This figure allows you to feel Guts\' overwhelming power -- order it for your own collection today!

[Figure Size]: Approximately 35cm tall
[Materials]: ABS, PVC


[Set Contents]:

* Main figure (including base)
* Collection sheet
* Display support parts

DEPOSIT: RM100.00
DEPOSIT: RM100.00 Request Stock
Quick View
img
PO PriceRM1680.00

Soul of Chogokin GX-115 Shinkansen Transforming Robot Shinkalion E5 Hayabusa

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : NOV 2025
Estimate arrival : DEC 2025

- P-O Price RM1680.00
- Deposit RM300.00, Balance RM1380.00
- We will inform to make balance RM1380.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The GX-115 Shinkansen from the first season of the TV anime "Shinkansen Transforming Robot Shinkalion" is now available in Bandai's "Soul of Chogokin" series! The Shinkalion E5 Hayabusa features front and rear cars that combine just like in the show to create the fully posable Shinkalion mode! The proportions are accurately recreated, with alloy parts used for the frame and Shinkansen bogies. The Kaisatsu Sword is held onto its palm with a pin for high holding power. The iconic kneeling pose can be reproduced easily, and the base, which is modeled after the interior of the Shinkansen Super Evolution Research Institute, can be displayed in Shinkansen mode too! The coupling cover can be opened and closed on both the front and rear car, because the leading cars are connected to each other when transformation begins. The fingers on the hand are movable, too! Order this amazing mech for your own collection today!

[Figure Size]: Approximately 26cm tall in Shinkalion mode
[Materials]: ABS, die-cast

[Set Contents]:

* Shinkansen E5 Series Hayabusa (leading car)
* Shinkansen E5 Series Hayabusa (rear car)
* Kaisatsu Sword
* Wing parts (x2)
* Dedicated base set

DEPOSIT: RM300.00
DEPOSIT: RM300.00 Request Stock
Quick View
img
PO PriceRM260.00

S.H.Figuarts Kaiju No.8

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JAN 2026
Estimate arrival : FEB 2026

- P-O Price RM260.00
- Deposit RM50.00, Balance RM210.00
- We will inform to make balance RM210.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

Kaiju No. 8 from the popular anime of the same name returns to Bandai's "S.H.Figuarts" action-figure series! His mighty proportions are based on his appearance in the anime, and he's loaded with points of articulation for maximum action! Three interchangeable faces are included: a scream, a surprised look, and an expression with clenched teeth. Some of his body parts are made of a soft material so they won't interfere with dynamic poses, and interchangeable hands are also included. Order him for your own collection today!

[Figure Size]: Approximately 19cm tall
[Materials]: PVC, ABS

[Set Contents]:
Main figure
Interchangeable faces (x3)
Interchangeable hands (left and right)
Interchangeable right arm part
Interchangeable right leg part set

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
Quick View
img
SAVERM378.20

S.H.MonsterArts Rathalos -20th Anniversary Edition

Using the movable structure cultivated in the SHMonsterArts series, the characteristic actions of Lioreus are reproduced.
Flame breath effect is included as a new model. Breath attacks in-game can be reproduced.
By replacing the wing parts, it is possible to reproduce the expanded and closed states. Also included is a support that can be displayed in a flying pose.
By using clear parts for the wings, a more biological texture is reproduced.
In addition, a pedestal featuring the logo commemorating the 20th anniversary of "Monster Hunter" is included!

RM700.00
RM700.00 Ask Availability
Quick View
img
SAVERM179.20

S.H.Figuarts Lance Crown

[Lance Crown] from the TV anime [Mushle-] appears in the action figure series SHFiguarts!

-[Lance Crown] has been turned into an action figure with the modeling and coloring of the image in the play! By adopting a movable mechanism for the robe in addition to the whole body, dynamic action scenes can be reproduced. In addition to 4 types of replacement facial parts, 2 types of locket pendants, [for neck] and [for handheld] are included. Mandragora and a small bottle are also included, expanding the world view!

-Because of SHFiguarts, an action figure series, various poses are decided cool!
- The overwhelming range of motion of the whole body allows for dynamic poses! Don\'t let the action get in the way. Cloak is movable.
- Mandragora, small bottle, and 2 types of pendants are included, allowing you to recreate [Lance Crown] just like in the play!
- [Sideways glare face] [Looking down face] [Open mouth face] [Screaming face] and a variety of replacement facial parts are included!

[set content]
- Body
- 4 types of replacement facial parts
- Replacement wrist left and right 4 types each
- Cane
- Two types of locket pendants
- Small bottle
- Mandragora

RM300.00
RM300.00 Ask Availability
Quick View
img
SAVERM40.00

[Infinite Dimension] MG 1/100 RT-002 Nemesis Assembly Model Kit

[Infinite Dimension] MG 1/100 RT-002 Nemesis Assembly Model Kit
 
Material: ABS
Scale: 1/100
Model Still Head Height : 22cm
Total Height : 27cm
Overall expansion width : 45cm

Content Include :
* Multi-layer skeleton structure with pre-assembled load-bearing joints and 14 pre-painted panels
* 3D stickers, metal etching, stand with arming and maintenance function

RM350.00
RM350.00 Request Stock
Quick View
img
SAVERM40.00

Einta Industries 1/72 Sky Defender Assembly Model Kit (with Metal Parts)

Brand : EINTA-INDUSTRIES
Scale : 1/72
Model Height : 34cm
Total Runner : 1103 pieces

- Etching sticker
- Spectacular action base (Size: 24cm x 30cm x 5cm)
- can be used to store all the weapons and armors
- High precision decal paper
- 4 Layers of Inner Frame

RM520.00
RM520.00 Request Stock
Quick View
img
SAVERM51.00

[Orange Cat Industry] 1/100 Estailev Neamhain Exceed Type Ext-GS Assemble Model Kit

Brand : [Orange Cat Industry]
Scale : 1/100
Model Name : Estailev
Model Height : <> 220mm

RM99.00
RM99.00 Request Stock
Quick View
img
SAVERM149.00

Motor Nuclear MNP-XH05 God Bless Star ZhaoYun / Zhao Yun Assembly Model Kit


Brand : Motor Nuclear 
Model : Motor Nuclear MNP-XH05 God Bless Star ZhaoYun / Zhao Yun Assembly Model Kit

Alloy Metal Inner frame is included

RM350.00
RM350.00 Request Stock
Quick View
img
SAVERM378.20

S.H.MonsterArts Zinogre -20th Anniversary Edition-

To commemorate the 20th anniversary of the Monster Hunter series, Jinogre is now available as the 20th Anniversary Edition!

-Using the movable structure cultivated in the SHMonsterArts series, the characteristic actions of Jinogre are reproduced.
-A new electric discharge effect is included. Reproduces the electrical discharge image of Jinogre in the game.
-In addition, a pedestal featuring the logo commemorating the 20th anniversary of "Monster Hunter" is included!
-By using clear parts, the texture of the hair part is reproduced.
-By replacing the claw parts of the front and hind legs, two types of claw shapes can be reproduced.

RM700.00
RM700.00 Ask Availability
Quick View
img
SAVERM189.20

S.H.Figuarts Fern

Fern from "Frieren: Beyond Journey's End" is now a member of the "S.H.Figuarts" action-figure lineup from Bandai! 

Frieren's disciple comes with a wide variety of interchangeable faces and hands, plus defense magic effect parts. Some of her outfit is made of a soft material to allow for impressive poses! 

Order her for your own collection today!

[Figure Size]: Approximately 14cm tall
[Materials]: PVC, ABS

[Set Contents]:
* Main figure
* Interchangeable faces (x3)
* Interchangeable hands (x3 left, x4 right)
* Cane
* Bracelet
* Magic effect parts
* Base set for magic effect parts

RM290.00
RM290.00 Ask Availability
Quick View
img
SAVERM30.00

[IRON TOYS] 1/100 TC-03 Star Fall Plastic Model Kits with Metal Inner Frame

Iron Toys 1/100 TC-03 Star Fall Plastic Model Kits with Inner Frame

Brand : Iron Toys
Code : TC-03
Model : Star Fall
Model Height : 22 cm

Contents :

- Fully assembled alloy skeleton x1
- Mecha main body x1
- Beam arm blades x2
- Ion Star Destroyer Backpack x1
- Ion Shields (Flying Swallow Set) x6
- Ion Annihilation Cannon x1
- Composite Slashing Swords x2
- Knob-adjustable display stand x1

RM198.00
RM198.00 Request Stock
Quick View
img
SAVERM200.00

Robot Spirits <Side AC> EL-PC-00 ALBA STEEL HAZE ORTUS / Rusty

- [EL-PC-00 ALBA STEEL HAZE ORTUS / Rusty] from [ARMORED CORE(TM) VI FIRES OF RUBICON(TM)] is now available!

- In addition to the wide range of motion unique to ROBOT Spirits, some of the joints are made of die-cast parts. [EL-PC-00 ALBA STEEL HAZE ORTUS / Rusty] has been brought to life in a 3D form with great attention to detail, coloring, and range of motion.

- Some die-cast parts are used, allowing for strong movement and shape.
- The laser slicer on the arm is also included in its deployed state.
- Needle missiles can be displayed in their deployed state by replacing parts.
- The core and bullet orbit can be replaced to recreate the deployed state. The bullet orbit body is also included in the deployed state. *[Tamashii STAGE] is sold separately.

[Set contents]
Main unit
?Interchangeable wrist parts (left and right)
?Needle gun
?Needle missile
?Needle missile deployment parts
?Laser slicer
?Laser slicer (unfolding)
?Laser slicer effect set
?Core expansion parts
?Live ammunition orbit storage state
?Parts for deploying live ammunition orbit
?Tamashii STAGE joint parts

RM700.00
RM700.00 Ask Availability
Quick View
img
SAVERM219.00

S.H.Figuarts Joseph Joestar

This is a posable action figure.

RM380.00
RM380.00 Ask Availability

Showing 241 - 270 of 618 products