• Home
  • Showing Gundam Parts + CUSTOM PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 91 - 120 of 476 products

Quick View
img
SAVERM9.90

[Builder Parts] 1/144 MS Hand 02 (Zeon)

The hands in this set contain the rounded bulky design characteristic of Zeon mobile suits.

Set include:
- Fist (L&R) x2
- Flat hand (L&R) x2
- Hand for weapon (L&R) x2
- Top of hand x12

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM15.90

[Builder Parts] 1/144 MS Vernier 01

- July 2012, a new line appeared in the builder's part! In the Detail-Up Parts, the Gundam More enjoyable! - With Gundam Part composition was conscious of compatibility is, of course, adopted the split parts considering the coloring. In addition, the if you are using the material, you can easily cut, glue, and coloring. - Appearance is, of course, attention to internal structure vernier parts! - 1/144, 1/100, enclosed are three types of cone type, flap type, each type of ring. - 1/144 to RG, 1/100 will correspond to the MG.


- These vernier parts feature a detailed appearance and elaborate inner structure.
- 3 types of verniers (cone, flap, and ring type) are included.
- 2 sets of cone x2, flap x2, ring x2, blast x2, flap x2, ring x2, attachment x8



RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM14.90

[Builder Parts] 1/100 MS Spike 01

In the Detail-Up Parts, the Gundam modelling process has turned more enjoyable then ever.


With Gundam Part composition was conscious of compatibility is, of course, adopted the split parts considering the coloring. 
In addition, if you are using the material PS, you can easily cut, glue, and coloring. 

 - 3 types pedestal, with a combination of three needle, can be used in nine kinds of variations. 
 - The content of the commodity: three needle x, 3 x pedestal seed [x2 Sets] 

RM21.00
RM21.00 Add to cart
Quick View
img
SAVERM10.10

MG 1/100 Strike Freedom Effect Unit Wing of Skies [Wing Effect Part]

Super Dragoon System Wing Effect For MG Strike Freedom Gundam 
Package Include :
  • 4 pieces Wing Effect
  • 24 pieces connection sockets
Notes :
  • Gundam Model Kit is Not Include
  • Action Base is NOT Include
  • Super Dragoon System is NOT Include

Super Dragoon System can order at HERE.

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM11.00

Wing of Light Effect for RG Destiny Gundam

RG Wing of Light and Red Colour action base, which special design for RG Destiny Gundam.


Package include :
1. Wing of Light for Destiny Gundam - 1 pair

Notes: 
  • This is not Bandai Product
  • The red color stand is not included

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM15.90

[Builder Parts] 1/144 MS GROUND 01

* Hover Unit x 2
* Claw Base x 2
* Claw A (Claws) x 6
* Claw B (Claws) x 6

RM26.00
RM26.00 Add to cart
Quick View
img
SAVERM9.90

[Builder Parts] HD 1/144 MS MS EFFECT 01

Effect parts for recreating the scenes.

2 kinds of beam sabers and 2 kinds of nozzle effects are included.
2 sets of nozzle effect x2 and beam saber x2

For scale 1/144

RM20.00
RM20.00 Add to cart
Quick View
img

ABS Pla Plate thinness 3.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 3.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

ABS (Acrylonitrile Butadiene Styrene) Plate
ABS is favored for parts that need to withstand mechanical stress or heat. 

Best for: Custom weapons, inner frames, or joints that might rub against other parts.

Handling: It is more elastic than standard styrene, meaning it is less likely to shatter if dropped. However, it is harder to bond with standard hobby cement; you should use ABS-specific cement or super glue.

Warning: Certain "pour-type" panel line markers can make ABS brittle and cause it to crack if applied directly to the bare plastic.

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM14.48

HG Strike Gundam Metal Blade Part

  • HG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM15.50
RM15.50 Add to cart
Quick View
img
SAVERM17.40

[Builder Parts] Non-Scale MS Vernier 02

The official conversion parts being made precisely for refining your Gunpla. 
The second vernier set is a non-scale offering, giving you more freedom to put them wherever you want on whatever kit you want!

Mobility-enhancing parts are now available as official gunpla remodeling parts.
Vernier set excellent at versatility. Square type, round type, 2 each of large and small.
Customize your Gunpla by attaching it to a backpack or thigh.
Molded product x 2

RM24.50
RM24.50 Add to cart
Quick View
img
SAVERM10.00

DDB MGSD Snow White Prelude Unit with Action Base

DDB Model MGSD Snow White Component Set Model Kit

Material: PVC, ABS
Scale: MGSD

Include:
- Floor / Base
- Bracket
- Model kit to build the Components

* Does not contain the main body

RM55.00
RM55.00 Add to cart
Quick View
img
SAVERM15.90

Option parts set Gunpla 09 (Giant Gatling)

Giant Gatling, which can be customized into various forms by freely rearranging the included accessory parts, is now available as an optional parts set!
Create your own original Giant Gatling by combining various accessory parts.
Two types of grip parts are included: one for 1/144 scale and one for 1/100 scale.

[Accessories]
- Giant Gatling x 1
- Grip x 1
- Accessory parts x 1
- Joint parts x 1

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM19.90

Option parts set Gunpla 06 (Valuable Pod)

A booster with a wealth of weapons that can be combined with various HG series items is now available as an optional parts set!

Can be attached to various aircraft by using joint parts. By combining it with the separately sold HGUC 1/144 Gyan, you can reproduce Gan Vulcan.
The back vulcan can be moved up and down.
It is also possible to equip the tip of the shield with a beam saber.
The shield can move freely on multiple axes, and various MS can be equipped by using grip parts.

[Accessories]
Valuable pod x 1 set
Joint parts x 1 set
Grip x 1 set
Seal x 1

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM37.40

Option Parts Set Gunpla 19 (Fin Funnels)

Bandai brings us the long-awaited weapon set for the "Entry Grade" 1/144-scale Nu Gundam! The Fin Funnels can be attached to a variety of units using the included joint parts; recreate firing poses by using the separately-sold Weapon Display Base 01. You can also combine two sets to recreate double Fin Funnels! Order yours today!

[Includes]:

* Fin Funnels (x6)
* New Hyper Bazooka
* Beam Saber (x1 set)
* Backpack
* Joint parts (x1 set)

RM52.50
RM52.50 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM4.00

[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N3)

  • Specifications : Maximum diameter 10.0mm, Height 10.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM13.00
RM13.00 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
RM13.20 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G2, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G2, Silver)

  • Specifications : Maximum diameter 8mm, Height 8mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM12.50
RM12.50 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM8.00

EW RG 1/144 Nu Gundam Fin Funnel Expansion Parts

Brand: Effect Wings (Third Party)
Scale: 1/144
Grade: RG 1/144


Contents:
- Includes 10 runners in the expansion pack.
- Includes 6 fin funnels + funnel stand.
- Includes fin funnels effect unit & stage act base stand.
- Includes assembling manual guide booklet.
- Runners are partially painted.

Please do take note that this is a Non-Bandai Product.
RG 1/144 Nu Gundam is sold separately & does not include in the package.
Contains only Fin Funnels expansion parts for RG 1/144 Nu Gundam.

RM60.00
RM60.00 Add to cart
Quick View
img
SAVERM1.30

PVC Form Board Chevron Board for Architectural model making materials (0.3 x 20 x 30 cm)

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 0.3 cm
Size : 20 cm x 30 cm  
Color : White
Material : PVC foam board
Quantity : 1 piece

PVC foam board, also known as chevron board, is a light, rigid, and smooth plastic sheet. It is an ideal material for architectural model making, prototyping, and craft projects because it cuts easily and holds a clean edge.

Key Features
* Lightweight: Easy to carry and assemble for large or small models.
* Easy to Cut: Slice cleanly with a standard craft knife or hobby scalpel.
* Smooth Surface: Perfect for painting, gluing, or adding vinyl wraps.
* Moisture Resistant: Will not warp or absorb water like regular foam board or cardboard.
* Rigid Structure: Holds its shape well without bending or sagging.

Common Uses
* Building walls and facades for architectural models.
* Creating base plates and topographical layers.
* Making custom signage, displays, and prototypes.
* 3D craft design and hobby projects.

RM3.50
RM3.50 Add to cart
Quick View
img
SAVERM19.90

Option Parts Set Gunpla 10 (Galaxy Booster)

The backpack of Build Strike Galaxy Cosmos is now available as an optional parts set!
With the Striker Pack system, it can be equipped on various Gunpla.
Each of the 12 wings, which is the biggest feature, can move independently and create a wide variety of silhouettes.
Joint parts are also included to expand the range of customization.

[Accessories]
Galaxy booster x 1
Joint parts x 1 set
Pedestal x 1
Seal x 1

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM22.90

Option Parts Set Gunpla 08 (Bolden Arm Arms)

A support machine connected by a flexibly movable arm and a wide variety of joint parts are now available as an optional parts set!
By rearranging parts, it can be transformed from flight form to combined form and can be equipped on various MS.
In addition to the main body, a variety of joint parts are included, including a single-axis joint, two-axis joint, and large, medium, and small ball joints.

[Accessories]
Bolden arm arms x 1 set
Anchor parts x 1
Joint parts x 1 set

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM27.40

Gundam Option Parts Set Gunpla 02 (Launcher Striker & Sword Striker) for Entry Grade

This option parts set from Bandai includes everything you need to convert your Entry Grade 1/144 Strike Gundam into Launcher Strike Gundam or Sword Strike Gundam, and the set is also compatible with other HG items! 3mm joints and C-type joint parts are included that can be selected depending on the kit it's used with. The Agni is movable with a ball joint and 3mm joint; the Panzer Eisen comes with a lead wire.  You can also recreate Perfect Strike Gundam by combining It with the Gundam Option Parts Set 1, sold separately! Order yours today!

[Includes]:

  • Launcher Striker (x1 set)
  • Sword Striker (x1 set)
  • Effect parts (x1 set)
  • Joint parts (x1 set)
  • Lead wire

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM38.50
RM38.50 Add to cart
Quick View
img
SAVERM17.40

[Builder Parts] 1/144 MS Vernier 03

- Official remodeling parts for gunpla with attention to detail. You can enjoy Gunpla even more by improving the details.
- Additional line-up for local warfare to official gunpla remodeling parts.
- Combine booster nozzles to enhance mobility.
- You can customize the booster part by freely combining two sizes of nozzles and bases.

Round base (large) x 2, round base (small) x 2, square base (large) x 2, square base (small) x 2, round vernier (large, 2 types) x 2, round A set of type verniers (small, 2 types) x 2, square verniers (large, 2 types) x 2, and square verniers (small, 2 types) x 2.

Molded product x 2, assembly manual x 1

RM24.50
RM24.50 Add to cart
Quick View
img
SAVERM7.00

Metal Double Axe for MG Zaku ( 1 Pair , 2 pcs )

Metal Double Axe for MG Zaku ( 1 Pair , 2 pcs )


Material : Metal 
Unit : 1 pair, 2 pcs

For MG 1/100 Scale Zaku

RM12.90
RM12.90 Add to cart
Quick View
img
SAVERM6.00

Metal Silver Baru Mace for HG Barbatos (Gundam Weapon)

Metal Silver Baru Mace for HG Barbatos


Material : Metal 
Unit : 1 pc

For HG Barbatos

RM13.90
RM13.90 Add to cart
Quick View
img
SAVERM4.80

ABS Rod 240mm Long (mix 7pcs - L Shape, Rectangle) for DIY customize Model Kit

Material: ABS

Shapes:  L Shape , Retangle

Package Contents :
-----------------------
L Shape
1. Width : 2mm+- x 2mm+- ,Length : 24cm+-
2. Width : 3mm+- x 3mm+- ,Length : 24cm+-
3. Width : 4mm+- x 3mm+- ,Length : 24cm+-

Retangle
1. Width : 2.0mm+- ,Height : 1.0mm+- ,Length : 24cm+-
2. Width : 3.0mm+- ,Height : 1.5mm+- ,Length : 24cm+-
3. Width : 4.0mm+- ,Height : 2.0mm+- ,Length : 24cm+-
4. Width : 5.0mm+- ,Height : 1.5mm+- ,Length : 24cm+-

RM7.20
RM7.20 Add to cart
Quick View
img
SAVERM6.00

MG 1/100 Turn A Gundam Butterfly Wings and Floating Cannon Effect Parts + Dedicated base

Wing of Light effect for MG Turn A Gundam.


Package include :
1. Moonlight Butterfly Wings of Light for MG Turn Gundam - 1 pair
2. Dedicated Base (Black)
3. Back Connector 1 set
4. Floating Cannon Effect Parts

Notes: 
  • This is not Bandai Product
  • Turn A Gundam is not included

RM62.00
RM62.00 Add to cart

Showing 91 - 120 of 476 products

Contact Us