Price Clear







Gundam Parts • CUSTOM PARTS

Showing 61 - 90 of 477 products

img
SAVERM11.00

Wing of Light Effect for RG Destiny Gundam

RG Wing of Light and Red Colour action base, which special design for RG Destiny Gundam.


Package include :
1. Wing of Light for Destiny Gundam - 1 pair

Notes: 
  • This is not Bandai Product
  • The red color stand is not included

RM18.90
img
SAVERM15.90

[Builder Parts] 1/144 MS GROUND 01

* Hover Unit x 2
* Claw Base x 2
* Claw A (Claws) x 6
* Claw B (Claws) x 6

RM26.00
img
SAVERM9.90

[Builder Parts] HD 1/144 MS MS EFFECT 01

Effect parts for recreating the scenes.

2 kinds of beam sabers and 2 kinds of nozzle effects are included.
2 sets of nozzle effect x2 and beam saber x2

For scale 1/144

RM20.00

ABS Pla Plate thinness 3.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 3.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

ABS (Acrylonitrile Butadiene Styrene) Plate
ABS is favored for parts that need to withstand mechanical stress or heat. 

Best for: Custom weapons, inner frames, or joints that might rub against other parts.

Handling: It is more elastic than standard styrene, meaning it is less likely to shatter if dropped. However, it is harder to bond with standard hobby cement; you should use ABS-specific cement or super glue.

Warning: Certain "pour-type" panel line markers can make ABS brittle and cause it to crack if applied directly to the bare plastic.

RM9.00
img
SAVERM1.10

ABS Rod 240mm Long (mix 17pcs - circle, square) for DIY customize Model Kit

Material: ABS

Shapes:  Round, Square, Annulus (With Holes), Square (With Holes)

Package Contents :
-----------------------
Round rod
1. Diameter : 0.5mm+- ,Length : 24cm+-
2. Diameter : 1.0mm+- ,Length : 24cm+-
3. Diameter : 2.0mm+- ,Length : 24cm+-
4. Diameter : 3.0mm+- ,Length : 24cm+-
5. Diameter : 5.0mm+- ,Length : 24cm+-

Square rod
1. Diameter : 1.0mm+- ,Length : 24cm+-
2. Diameter : 1.5mm+- ,Length : 24cm+-
3. Diameter : 2.0mm+- ,Length : 24cm+-
4. Diameter : 3.0mm+- ,Length : 24cm+-
5. Diameter : 5.0mm+- ,Length : 24cm+-

Annulus (With Holes)
1. Diameter : 2.0mm+- ,Length : 24cm+-
2. Diameter : 3.0mm+- ,Length : 24cm+-
3. Diameter : 4.0mm+- ,Length : 24cm+-
4. Diameter : 5.0mm+- ,Length : 24cm+-

Square (With Holes)
1. Diameter : 3.0mm+- ,Length : 24cm+-
2. Diameter : 4.0mm+- ,Length : 24cm+-
3. Diameter : 5.0mm+- ,Length : 24cm+-

RM13.90
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1.5 mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 2mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2mm diameter

RM3.00
img
SAVERM17.40

[Builder Parts] Non-Scale MS Vernier 02

The official conversion parts being made precisely for refining your Gunpla. 
The second vernier set is a non-scale offering, giving you more freedom to put them wherever you want on whatever kit you want!

Mobility-enhancing parts are now available as official gunpla remodeling parts.
Vernier set excellent at versatility. Square type, round type, 2 each of large and small.
Customize your Gunpla by attaching it to a backpack or thigh.
Molded product x 2

RM24.50
img
SAVERM10.00

DDB MGSD Snow White Prelude Unit with Action Base

DDB Model MGSD Snow White Component Set Model Kit

Material: PVC, ABS
Scale: MGSD

Include:
- Floor / Base
- Bracket
- Model kit to build the Components

* Does not contain the main body

RM55.00
img
SAVERM14.00

RG Wing Zero Custom PVC Wing Feather - White (Non-Bandai)

- Kindly note that this is a Non Bandai product
- No painting required
- Modelling tools are required to complete the product as the image shown.
- Wing Gundam Zero Custom EW is not included in the package, this is just the feather "wing" modded version of the Wing Zero Custom.
- Suitable for RG Wing Zero Custom 1/144 Real Grade Only.

RM13.00
img
SAVERM16.90

[035] HGBC 1/144 Changeling Rifle

Customize your HGBD kits with the new HGBC Changeling Rifle! Rifle parts from this set can change into multiple forms! Mix and match with various muzzle parts to create new weapons!

RM19.00
img
SAVERM14.00

Wing of Light Effect for MG 1/100 Destiny Gundam [Wing Effect Expansion Only]

Wing of Light effect for MG Destiny Gundam.


Package include :
1. Wing of Light for Destiny Gundam - 1 pair

Notes: 
  • This is not Bandai Product
  • Action is not included
  • Destiny Gundam is not included

RM18.90
img
SAVERM3.00

Metal Blade for PG 1/60 Astray Red Frame Gundam (1 unit)

  • PG Astray Red Frame Gundam metal knife part
  • Total Length : 32.5 cm
  • This item consists of the 1 unit metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM32.00
img
SAVERM37.40

Option Parts Set Gunpla 19 (Fin Funnels)

Bandai brings us the long-awaited weapon set for the "Entry Grade" 1/144-scale Nu Gundam! The Fin Funnels can be attached to a variety of units using the included joint parts; recreate firing poses by using the separately-sold Weapon Display Base 01. You can also combine two sets to recreate double Fin Funnels! Order yours today!

[Includes]:

* Fin Funnels (x6)
* New Hyper Bazooka
* Beam Saber (x1 set)
* Backpack
* Joint parts (x1 set)

RM52.50
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM3.60

[Metal Part] 5mm Zaku metallic Lens - Blue Colour

  • Diameter: 5.0mm
  • Blue colour lens
  • Thickness: 2.6mm
  • Material: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits
  • Glue required

RM2.40
img
SAVERM9.00

MG 1/100 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel

Brand: No Brand
Made in China
Item: MG 1/100 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
Scale: 1/100

Box contains: 12 pcs effect parts

* Effect parts only, MG 1/100  Nu Gundam and Fin Funnel is NOT included

RM15.00
img
SAVERM8.00

RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel

Brand: No Brand
Made in China
Item: RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
Scale: 1/144

Box contains: 12 pcs effect parts

* Effect parts only, RG 1/144  Nu Gundam and Fin Funnel is NOT included

RM10.00
img
SAVERM24.00

[DIAN CHANG] MGEX 1/100 Strike Freedom Gundam Wing of Light Option Set

[DIAN CHANG] MGEX 1/100 Strike Freedom Gundam Wing of Light Option Set

Suitable for Bandai MGEX 1/100 Strike Freedom Gundam

RM65.00
img
SAVERM3.00

DDB MGEX Strike Freedom Gundam Wing Of Light Option Set

MGEX Strike Freedom Model kit and Action Base are Sold Separately

Content:

- Wing of Light x 1 set
- Dragoon Launching Effect Part x 8
- Dragoon Jet Effect Part x 8
- Dragoon Connector x 8
- Dragoon Connector for Action Base x 8
- Dragoon Backpack Connector x 1

RM75.00
img
SAVERM11.90

[DALIN] MG Shadow Cloak Type II - Blue Purple Color Expansion Unit Weapon Pack

Brand: DALIN (Third Party)
Scale: 1/100
Grade: MG 1/100

Contents:
- Each box contains only one unit of Shadow Cloak.
- Includes 3 main color of Shadow Cloak with White, Black and Blue Purple
- Each set of Shadow Cloak comes with 3 colors (Red, Blue and Grey) of replacement parts runners on Cloak thruster unit and center stripe
- 6 modes can be form to be Cloak Mode, Shield Mode, Attack Mode, Tactical Mode, Booster (Activate or Deactivate) Mode.
- Can combine few set of the Cloak to become full Cloak mode (2 sets) or heavy full cloak mode (4 sets) rather than just single cloak mode (1 set)
- Multiple adapter provided for shoulder and backpack make cloak compatible with mostly MG Seeds Gunpla.

Shoulder Adapter Suitable for:
  • BANDAI MG Aile Strike Gundam
  • BANDAI MG Astray Red Frame
  • BANDAI MG Astray Blue Frame 2nd Revise
  • BANDAI MG Blitz Gundam
  • BANDAI MG Sengoku Astray Gundam
  • BANDAI MG Buster Gundam
  • BANDAI MG Duel Assault Gundam 
  • DABAN 66 series MG gundam 

Backpack Adapter Suitable for:
  • BANDAI MG Aile Strike Gundam
  • BANDAI MG Astray Red Frame
  • BANDAI MG Astray Blue Frame 2nd Revise
  • BANDAI MG Blitz Gundam
  • BANDAI MG Sengoku Astray Gundam
  • BANDAI MG Eclipse Gundam
  • BANDAI MG Buster Gundam
  • BANDAI MG Duel Assault Gundam 
  • DABAN 66 series MG gundam 
Please do take note that this is a Non-Bandai Product.
MG 1/100 Gundam Astray Red Frame is sold separately & does not include in the package.
Contains only Shadow Cloak for MG 1/100 Gundam Astray Red Frame.

RM78.00
img
SAVERM4.00

[Effect Wing] EW HWS Expansion Set and Tactical Armor Transporter for RG nu Gundam

[EW RG 1/144 nu Gundam HWS  Expansion Parts and Tactical Armor Transporter


Set Details:
- Armor Transporter Carrier
- Chest Armor Unit
- Front Armor Unit
- Leg Armor & Thruster Unit
- Shoulder Mounted Missile Launcher
- Hyper Mega Shield
- Hyper Mega Rifle
- Water Slide Decals
- Fin Funnels Stand & Effects
- Stage Act Base

Brand  : Effect Wing
Scale  :1/144
Grade : RG

RM85.00

HG 1/144 size Blade Sword Holder

HG 1/144 size Blade Sword Holder


Size : 4.5 x 3.5 x 8 cm
Material : Plastic
Color : Black

RM3.90
img
SAVERM16.00

Super Dragoon System for RG Strike Freedom Gundam [Wing Effect Part is not Include]

Super Dragoon System For RG Strike Freedom Gundam 
  • Accessories for RG Strike Freedom Gundam use only.
Package Include :
  • Super Dragoon System (Total 8 Pieces 6.6 cm lenght)
  • 8 set connectors (20.5 cm length)
Notes :
  • Gundam Model Kit is Not Include
  • Action Base is NOT Include
  • Wing Effect is NOT Include
  • This is Non-Bandai product

RM13.90
img
SAVERM1.90

DDB MGSD Freedom Gundam Wing Of Light Option Set

DDB MGSD Freedom Gundam Wing Of Light Option Set
Brand : DDB
Model : MGSD Freedom Accessories only

- Include jet effects action base connector

Note : Wing Of Light only, model kit body is not included


RM28.00
img
SAVERM17.40

[Builder Parts] 1/144 MS Vernier 03

- Official remodeling parts for gunpla with attention to detail. You can enjoy Gunpla even more by improving the details.
- Additional line-up for local warfare to official gunpla remodeling parts.
- Combine booster nozzles to enhance mobility.
- You can customize the booster part by freely combining two sizes of nozzles and bases.

Round base (large) x 2, round base (small) x 2, square base (large) x 2, square base (small) x 2, round vernier (large, 2 types) x 2, round A set of type verniers (small, 2 types) x 2, square verniers (large, 2 types) x 2, and square verniers (small, 2 types) x 2.

Molded product x 2, assembly manual x 1

RM24.50
img
SAVERM4.00

Third Party Brand Double Horn Funnel Weapon Set for RG 1/144 MSN-04FF SAZABI

Third Party Brand Double Horn Funnel RG 1/144 MSN-04FF SAZABI

Brand : GaoGao
Grade : HG
Scale : 1/144
Model : Double Horn Funnel Weapon Set

Please note that this is non-Bandai item.

RM28.00
img
SAVERM1.30

PVC Pla Plate thinness 0.3 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 0.3 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC "Pla Plates" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional "Pla Plate" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM1.50

Showing 61 - 90 of 477 products

Contact Us