• Home
  • Showing Gundam Parts + CUSTOM PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 391 - 420 of 473 products

Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B6, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B6) (2units)

  • Specifications: Maximum diameter 15 mm, Height 12 mm, Joint diameter 2.0 mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
Stainless
    Installation guide:

    1)Requires drilling works to create a joining point (2.0mm)
    2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM63.70

Metallic Nano Puzzle Premium Series Gundam Metanano P Gold Gundam

Gundam RX-78-2 from Original "Mobile Suit Gundam" is the limited release of the high quality "Metallic Nano Puzzle Premium Series" which is made of laser cut technique. Moreover, the Premium Bandai limited edition is the stunning gold version! 

It can fulfill the feeling of "Great Satisfaction""Overwhelming powerful force""Premium Finishing", please go and check it out! 

RM236.30
RM236.30 Request Stock
Quick View
img
SAVERM17.90

[Figure-rise Effect] Ground Effect (Purple)

- Grand effect appears in Figure-rise Effect!

- Faithfully reproduce landing scenes and battle scenes! The width of the display further expands!
- The ground parts can also be used as a foundation! If you use the clear base, you can reproduce the effect of the peeled ground floating in the air!
- A special action base is included, and the combination with the effect is free!
- The dedicated action base post is movable in three axes and can be flexibly adjusted in position.
- By further combining the attached joint parts, you can secure the scaffolding by separating the effect parts from the pedestal, stereoscopically attached to the support, a wide range of display possible!
- Also compatible with the figure-rise effect on sale!

- accessories
· Action base x 1
· Joint parts x 4
· Large strut parts x 2
- Support pole parts small x 2
· Joint parts for pedestal x 1

- Product content
· Molded product x 3
· Instruction manual x 1

RM36.00
RM36.00 Request Stock
Quick View
img
SAVERM13.80

[029] HGBC 1/144 Ninpulse Beams

- Beam effect set corresponding to various Gundams appears!

- Four beam effect parts are reproduced with various sizes and shapes.
- It is also possible to link two effect parts.

- accessories
· 8 beam effect part parts x 2

RM22.10
RM22.10 Request Stock
Quick View
img
SAVERM61.00

Metallic Nano Puzzle Premium Series Gundam Metanano P Zaku II

- Make Gotae series of superlative
- By ultra-precision laser cut, and high quality metal model
- Remove the parts, the completion of the three-dimensional objects to be combined

RM189.00
RM189.00 Request Stock
Quick View
img
SAVERM17.90

[Figure-rise Effect] Burst Effect (Orange)

- Burst effect appears in Figure-riseEffect!

- Faithfully reproduce the explosion scene and the shot impact scene! The width of the display further expands!
- Dust can be reproduced with gray effect!
- A special action base is included, and the combination with the effect is free!
- The dedicated action base post is movable in three axes and can be flexibly adjusted in position.
- By further combining the attached joint parts, you can secure the scaffolding by separating the effect parts from the pedestal, stereoscopically attached to the support, a wide range of display possible!
- Also compatible with the figure-rise effect on sale!

- accessories
· Action base x 1
· Joint parts x 4
· Large strut parts x 2
- Support pole parts small x 2
· Joint parts for pedestal x 1

- Product content
· Molded product x 3
· Instruction manual x 1

RM36.00
RM36.00 Request Stock
Quick View
img
SAVERM20.60

Figure-rise Effect Burst (Space Pink)

The new version of Bandai Figure-rise Effect Burst in a deep space style color!  A base and pole arms are included to give you more freedom in setting up your action scenes. 


Accessories:

- Action base
- Joint part (x4)
- Large supporting arm (x2)
- Small supporting arm (x2)
- Joint part for base

RM33.30
RM33.30 Request Stock
Quick View
img
SAVERM10.00

[Third Party] HG 1/144 Gundam Barbatos Metal Mace (Silver)

[Third Party] HG 1/144 Gundam Barbatos Metal Mace


Brand : OEM 
Material : Metal 
Color : Silver
Scale : 1/144

* Note : Gundam Barbatos is not included

RM14.00
RM14.00 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C3, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C4, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C5, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C5)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C8, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C8)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B3, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3.0mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Silver)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Silver 

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM9.20

[Metal Part] Energy Cable Tubes Pipes (L size, 5mm, Titanium Black)

5mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 5mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM10.40
RM10.40 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Titanium Black)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM7.30

[Metal Part] Energy Cable Tubes Pipes (S Size, 3mm, Titanium Black)

3mm (S size) Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 3mm
Color : Titanium Black

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Gold)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.3 mm , 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.3 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.5 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.5 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
RM8.45 Request Stock
Quick View
img
SAVERM4.80

[Metal Part] 4.0mm Ribbed Shell Screw * 4 units

4.0mm Ribbed Shell Screw metal parts
- Maximum diameter : 4.0 mm 
- Part Long : 2.0 mm 
- Each set got 1 unit ribbed shell screw 
- Total 4 sets per pack  

Suitable for Gundam Metal Parts customization

RM5.20
RM5.20 Request Stock
Quick View
img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
RM5.20 Request Stock
Quick View
img
SAVERM3.00

[Metal Part] U1 Metallic Silver Air Vents / Thruster for Gundam Kit - 4pcs

  • Easy installation
  • Widest diameter:8.5mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (4 vents)
  • MG F.A. Unicorn Gundam (4 vents)
  • MG Nu Gundam Ver KA (4 vents)

RM7.80
RM7.80 Request Stock
Quick View
img
SAVERM11.00

[Third Party] HG 1/144 Gundam Barbatos Metal Mace (Gray)

[Third Party] HG 1/144 Gundam Barbatos Metal Mace


Brand : OEM 
Material : Metal 
Color : Gray
Scale : 1/144

* Note : Gundam Barbatos is not included

RM13.00
RM13.00 Request Stock
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
RM11.50 Request Stock
Quick View
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y1, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y1, Gold)

  • Specifications : Maximum diameter 6mm, Height 6.5mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM8.20
RM8.20 Request Stock
Quick View
img
SAVERM5.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y5, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y5, Gold)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM8.20
RM8.20 Request Stock
Quick View
img
SAVERM11.50

[Metal Part] HG / MG Scale Gundam Model kit Metal Modification Bar / Stick (8 units)

HG / MG scale Gundam Model kit  Metal Tonic

* Detail Modification 
* Universal compatible
* Detail Bar / Pole Decorative Bar

Bar length : 10 mm
Joint Diameter : 1.0mm
8 units in the package

RM6.50
RM6.50 Request Stock

Showing 391 - 420 of 473 products