• Home
  • Showing Gundam Parts + CUSTOM PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 31 - 60 of 464 products

Quick View
img
SAVERM15.30

[Metal Part] MG 1/100 Hi-Nu Gundam Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.LED + 2 batteries x1direct installation
2.Vulcan Canon x2drill 1.3mm hole, attached to point with minor cement
3.Backpack + Calf thruster x4drill 2.0mm hole, attached to point with minor cement
4.Shoulder heavyarm screw x4drill 1.0mm hole, attached to point with minor cement
5.Forearm aviation hole x4drill 1.0mm hole, attached to point with minor cement
6.Metal hand joint cover (round shape) x4Direct installation, attached to point with minor cement
7.Chest Aviation hole x2drill 2.5mm hole, attached to point with minor cement
8.Metal knee joint cover (round shape) x4drill 1.0mm hole, attached to point with minor cement
9.Metal knee joint Hydraulic tube (round shape) x4drill 1.0mm hole, attached to point with minor cement
10.Knee and lower aviation hole x8drill 3.0mm hole, attached to point with minor cement
11.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Canon nozzle x1drill 2.0mm hole, attached to point with minor cement
12.Shield Aviation hole x12drill 2.0mm hole, attached to point with minor cement
13.Armor screw x10direct installation, attached to point with minor cement
14.Armor Screw 1.5mm x30drill 2.0mm hole, attached to point with minor cement
15.Armor aviation hole 1.6mm x15drill 1.6mm hole, attached to point with minor cement
16.Armor aviation hole 1.5mm x50drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM88.40
RM88.40 Add to cart
Quick View
img
SAVERM30.20

[Metal Part] RE 1/100 Gundam Mk III Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index        Parts                                                 Installation
1.                Rear Thruster x3                         drill 2.5mm hole, attached to point with minor cement
2.                Backpack thruster - x3                 drill 3.5mm hole, attached to point with minor cement
3.                Calf thruster - x2                         drill 1.4mm hole, attached to point with minor cement
4.                Armor aviation hole x15         drill 2.0mm hole, attached to point with minor cement
5.               Single line Screw x30                 drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
RM73.50 Add to cart
Quick View
img
SAVERM16.30

MG Strike Gundam Metal Blade Part

  • MG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM23.60
RM23.60 Add to cart
Quick View
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1mm diameter

RM3.00
RM3.00 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B2, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B2)

  • Specifications : Maximum diameter 6.0mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B9, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (B10, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B11, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM4.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (N2, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N2)

  • Specifications : Maximum diameter 8.0mm, Height 8.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM4.00

[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N3)

  • Specifications : Maximum diameter 10.0mm, Height 10.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM13.00
RM13.00 Add to cart
Quick View
img
SAVERM3.70

[Metal Part] Metal Thruster / Vents for Gundam Kit (N4, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N4)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM14.30
RM14.30 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (N5, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N5)

  • Specifications : Maximum diameter 6.0mm, Height 3.0mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM4.60

[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit

Joining Angle Detailing Enhancement Parts

- Maximum diameter : 9 mm 
- Part Long : 3.8 mm 
- Each set got 2 unit enhancement metal part 
- Total 4 sets per pack  

Suitable for Gundam Arm and Leg joining angle customization.

RM10.40
RM10.40 Add to cart
Quick View
img
SAVERM5.50

[Metal Part] Turbine / Turbcharger Screw - 6 units

Turbcharger Screw Metal Parts
- Maximum diameter : 6.0 mm 
- Part Long : 2.0 mm 
- Joint hole diameter : 2.0 mm
- Each set got 1 unit Turbcharger Screw 
- Total 6 sets per pack  

Suitable for Thruster and Vent customization.

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] X1 Turbine Thruster for Gundam Kit (1 pair, 2 sets)

[Metal Part]  Metal Turbine Thruster for Gundam Kit (X1)

  • Specifications : Maximum diameter 9mm, Height 10mm, Joint hole Diameter 2.0mm
  • 2 sets (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
RM13.20 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
RM11.50 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G2, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G2, Silver)

  • Specifications : Maximum diameter 8mm, Height 8mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM12.50
RM12.50 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM7.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y7, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y7, Gold)

  • Specifications : Maximum diameter 12mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.80
RM9.80 Add to cart
Quick View
img
SAVERM4.40

[Metal Part] Metal Hydraulic Piston (4 units)

[Metal Part]  Metal Hydraulic Piston

  • Specifications : Maximum diameter 2mm, Total Length 15mm, Joint hole Diameter 1.0mm &                                  Joint hole Length 2.0mm
  • 4 units (2 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.0mm)
2)Apply cement to ensure the center joint tightened

RM5.60
RM5.60 Add to cart
Quick View
img
SAVERM24.00

[DIAN CHANG] MGEX 1/100 Strike Freedom Gundam Wing of Light Option Set

[DIAN CHANG] MGEX 1/100 Strike Freedom Gundam Wing of Light Option Set

Suitable for Bandai MGEX 1/100 Strike Freedom Gundam

RM65.00
RM65.00 Add to cart
Quick View
img
SAVERM10.00

[Effect Wing] EW Metal Build Alloy Inner Frame for MG Wing Zero Ver. Ka

* Brand : Effect Wing
* Metal Build Alloy Inner Frame for MG Wing Zero Ver. Ka
* The original MG Wing Zero Ver. Ka Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
* Through the package modification, the effect of the finished diecast MG Wing Zero Ver. Ka Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
* Anyhow, this modification does not completely solve all the problems of the original.

RM98.00
RM98.00 Add to cart
Quick View
img

HG 1/144 size Blade Sword Holder

HG 1/144 size Blade Sword Holder


Size : 4.5 x 3.5 x 8 cm
Material : Plastic
Color : Black

RM3.90
RM3.90 Add to cart
Quick View
img
SAVERM2.10

Giant Mechanical Palm , Claw For Gunpla Gundam Model Kit Customization (1 unit)

Giant Mechanical Palm / Claw For Gunpla Gundam Model Kit Customization
1 box can only be assembled with one palm / claw, you may choose to assemble it into a left or right hand

Type : Palm / Claw

Suitable for universal Gundam Mobile suit or 30MS Girl Transformers


RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM9.90

BANDAI MECHA COLLE Ultraman Series No 11 Magma Riser Model Kit

The Magma Riser from \"Ultraman\" gets a Mecha Collection release from Bandai!  Build a detailed, palm-sized replica of this powerful vehicle, which includes a precisely reproduced jet drill and a movable missile launcher.  Waterslide decals are included for the markings. 

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM9.90

BANDAI MECHA COLLE Ultraman Series No 13 Ultra Hawk No.1 Alpha Model Kit

The Ultra Hawk No. 1 Alpha gets a Mecha Collection kit from Bandai!  Affordable and easy to assemble, it\'s about 10cm long, and comes with stickers for the markings and a base for display.  Combine it with the Ultra Hawk No. 1 Gamma and Ultra Hawk No. 1 Beta to form the full Ultra Hawk No. 1!

RM20.00
RM20.00 Add to cart
Quick View
img
SAVERM2.00

Aile Strike Backpack for Entry Grade Strike Gundam

Aile Strike Backpack for Entry Grade Strike Gundam


- Package include Aile Strike Backpack for Entry Grade 1/144 Strike Gundam After assembled
- 4 pcs plastic runners
- 1 sticker
- 1 Beam rifle
- 2 Beam saber (pink color straight)
- Assemble manual

* Strike Gundam model kit body is not included
* This is non-Bandai product 
* This product is come without hard paper box.

RM13.90
RM13.90 Add to cart

Showing 31 - 60 of 464 products