• Home
  • Showing Gundam Parts + CUSTOM PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 181 - 210 of 473 products

Quick View
img

ABS Pla Plate thinness 3.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 3.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

ABS (Acrylonitrile Butadiene Styrene) Plate
ABS is favored for parts that need to withstand mechanical stress or heat. 

Best for: Custom weapons, inner frames, or joints that might rub against other parts.

Handling: It is more elastic than standard styrene, meaning it is less likely to shatter if dropped. However, it is harder to bond with standard hobby cement; you should use ABS-specific cement or super glue.

Warning: Certain "pour-type" panel line markers can make ABS brittle and cause it to crack if applied directly to the bare plastic.

RM9.00
RM9.00 Request Stock
Quick View
img
SAVERM26.55

1/144 System Weapon 006

  • A set of Rateken Buzz, the first bazooka of the "Weapon series", and Zaku Type Shield, that can provide various customization. 
  • Rateken Buzz can be "Regular Type" or "Barrage Type" by replacing the parts. 
  • Zaku Type Shield can mount various kinds of weapons such as "Sturm Faust" and "Spike". It can be attached to both HG and RG by replacing the parts. 
  • A special rack for weapons is included. 
  • Semi-assembled parts x2, Runner x4, Instruction manual x1 

RM45.40
RM45.40 Request Stock
Quick View
img
SAVERM2.00

Anubis 1/144 HG Gundam Calibarn Heighten Expansions Kit

Anubis 1/144 HG Gundam Caliban Heighten Expansions Kit 

- 3D printed resin x 34 units
- ABS joining parts x 4 piece
- Gray material color ( No painted)
- Code : EX-022

Please note that this is Not-Bandai product

RM36.00
RM36.00 Request Stock
Quick View
img
SAVERM10.00

[Effect Wing] Metal Build Alloy Inner Frame for MG Astray Red Frame

  • Metal Build Alloy Inner Frame for MG Astray Red Frame
  • The original MG Astray Red Frame Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Red Frame Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM118.00
RM118.00 Request Stock
Quick View
img
SAVERM10.00

[Effect Wing] Metal Build Alloy Inner Frame for MG Astray Blue Frame Second Revise

[Effect Wing] Metal Build Alloy Inner Frame for MG Astray Blue Frame Second Revise


  • Metal Build Alloy Inner Frame for MG Astray Blue Frame Second Revise
  • The original MG Astray Blue Frame Second Revise Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Blue Frame Second Revise Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM118.00
RM118.00 Request Stock
Quick View
img
SAVERM31.90

Option Parts Set Gunpla 19 (Fin Funnels)

Bandai brings us the long-awaited weapon set for the "Entry Grade" 1/144-scale Nu Gundam! The Fin Funnels can be attached to a variety of units using the included joint parts; recreate firing poses by using the separately-sold Weapon Display Base 01. You can also combine two sets to recreate double Fin Funnels! Order yours today!

[Includes]:

* Fin Funnels (x6)
* New Hyper Bazooka
* Beam Saber (x1 set)
* Backpack
* Joint parts (x1 set)

RM58.00
RM58.00 Request Stock
Quick View
img
SAVERM1.00

ABS Pla Plate thinness 0.5 mm (10 cm x 20 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 0.5 mm
Size : 10 cm x 20 cm 
Color : White
Material : ABS
Quantity : 1 piece

RM1.60
RM1.60 Request Stock
Quick View
img
SAVERM7.90

Flame Effect Parts and Damashii Action Base for modelling kits (Blue Colour Flame)

  • Blue color flame effect units (1 big and 4 small units)
  • Suitable for 1/144 scale kits and S.H.Figures.
  • Transparent Damashii action base in included.

RM22.00
RM22.00 Request Stock
Quick View
img

Flame Effect Parts and Damashii Action Base for modelling kits (Red Colour Flame)

  • Red color flame effect units (1 big and 4 small units)
  • Suitable for 1/144 scale kits and S.H.Figures.
  • Transparent Damashii action base in included.

RM29.00
RM29.00 Request Stock
Quick View
img

Flame Effect Parts and Damashii Action Base for modelling kits (Black Colour Flame)

  • Black color flame effect units (1 big and 4 small units)
  • Suitable for 1/144 scale kits and S.H.Figures.
  • Transparent Damashii action base in included.

RM29.00
RM29.00 Request Stock
Quick View
img
SAVERM9.90

[03] Bandai Customize Effect (Explosion Burst Image Ver.) [Orange]

- Appropriate effects for 1/144 scale! Anyone can easily create original battle scenes
- A set of a set of effect parts and a set of joint parts that express the explosion

[accessories]
* Effect parts x 1 set
* Joint parts x 1 set

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM9.90

BANDAI MECHA COLLE Ultraman Series No 08 ULTRA GUARD ULTRA HAWK 002 Model Kit

Bandai 212198 - Ultra Guard Ultra Hawk 002 Mecha Colle 08


The Ultra Hawk 2 joins Bandai's Mecha Collection series of model kits!  It'll be about 13.5cm long when assembled, and it comes with a stand for display; it can be shown in flight or pointed upward ready for launch!  Molded in silver-gray plastic, with waterslide decals. 

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM13.00

[Metal Part] MG 1/100 MS-06S Zaku II (Johnny Ridden Custom) Ver.2.0 Metal Enhancement Part Set

[Metal Part] MG 1/100 MS-06S Zaku II (Johnny Ridden Custom) Ver.2.0 Metal Enhancement Part Set


It contain 11 types of metal parts for MG 1/100 Char\'s Zaku II to enhance

1. Red Eye Zaku Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Backpack Thruster, C1 x 2 set
5. Arm Side / Shoulder Thorn Metal Spikes x 3 
6. Energy Pipe on Leg S x 1
7. Energy Pipe on Leg L x 1
8. Leg Thruster, C5 x 6 set
9. Aviation Hole 1.6 mm x 15
10. Aviation Hole 2.0 mm x 15
11. Metal Silver Bead Ball 1.5 mm x 50
11-2. Flat Head Screw 2.0 mm x 30 

RM85.00
RM85.00 Request Stock
Quick View
img
SAVERM3.00

DDB MGEX Strike Freedom Gundam Wing Of Light Option Set

MGEX Strike Freedom Model kit and Action Base are Sold Separately

Content:

- Wing of Light x 1 set
- Dragoon Launching Effect Part x 8
- Dragoon Jet Effect Part x 8
- Dragoon Connector x 8
- Dragoon Connector for Action Base x 8
- Dragoon Backpack Connector x 1

RM75.00
RM75.00 Request Stock
Quick View
img
SAVERM10.00

[IRON TOYS] Metal Build Alloy Inner Frame and Metal Parts for Full Mechanics FM 1/100 Gundam Aerial

Brand : Iron Toys (Tie Chuang)
  • Metal Build Alloy Inner Frame for Full Mechanics FM 1/100 Gundam Aerial
  • The connector between the calf and knee is changed from separate parts to one part.
  • The power tube at the rear of the leg is changed to a braided rope style display.
  • The original Full Mechanics FM 1/100 Gundam Aerial design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast Full Mechanics FM 1/100 Gundam Aerial model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM128.00
RM128.00 Request Stock
Quick View
img
SAVERM13.00

Anubis 1/100 FM Gundam Aerial Mirasoul Fight Unit Back Pack

- 3D printed resin x 34 units
- ABS joining parts x 1 piece
- Gray material color ( No painted)
- Code : EX-020

Please note that this is Not-Bandai product

RM75.00
RM75.00 Request Stock
Quick View
img
SAVERM2.00

Metal Tomahawk for MG Tallgeese

Metal Tomahawk for MG Tallgeese


Product Length :  19.5cm
Product Weight : 100 gram


RM17.90
RM17.90 Request Stock
Quick View
img
SAVERM10.00

[Effect Wing] Metal Build Alloy Inner Frame for MG Astray Blue Frame D

[Effect Wing] Metal Build Alloy Inner Frame for MG Astray Blue Frame D


  • Metal Build Alloy Inner Frame for MG Astray Blue Frame D
  • The original MG Astray Blue Frame D Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Astray Blue Frame D Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM118.00
RM118.00 Request Stock
Quick View
img
SAVERM62.30

30MS Minute Sister Option Hair Style & Face Parts Set (Tenka Osaki & Chiyuki Kuwayama)

Combine these parts with Bandai's 30MS Option Body Parts Beyond the Blue Sky 1 (Color A) and 30MS Option Body Parts Alpha Sisters Phantasm 1 (Color A) to create Tenka Osaki and Chiyuki Kuwayama from "The IdolM@ster"! 

The delicate flow of each character's hair has been carefully sculpted; hair accessories can be attached and detached to match the costume design, and they can also be displayed without a hair ornament. Two types of tampo-printed facial expressions are included for each character. Order yours today!

[Includes]:

  • Tenka Osaki face parts (tampo printed) (x2)
  • Chiyuki Kuwayama face parts (tampo printed) (x2)
  • Hairstyle parts (x1 set each)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

RM87.50
RM87.50 Request Stock
Quick View
img
SAVERM96.70

[Kyokai Senki / Boundary Fighter] HG 1/72 Weapon Set 8

Weapon Set 8 from "Kyoukai Senki" includes both weapons and support vehicles! 

This set includes the AMAIM transport vehicle Dreadnoughtus and weapons such as a gatling gun, missile launcher, and smoke discharger. 

The Dreadnoughtus has 3mm-diameter connection holes for customization with an emphasis on expadability, and various gimmicks such as the rotation of the tires and expansion of the loading platform gate at the rear of the vehicle are included. 

The missile launcher also comes with a grip that can be attached to mechs.

[Includes]:

  • Dreadnoughtus
  • Missile launcher (x2)
  • Smoke discharger (x4)
  • Gatling gun
  • Grip (x2)
  • Joint parts (x1 set)
  • Stickers

RM95.00
RM95.00 Request Stock
Quick View
img
SAVERM27.40

Entry Grade EG 1/144 Aile Striker Gundam Option Parts Set Gunpla 01 for Strike Gundam

This option parts set from Bandai includes everything you need to convert your Entry Grade 1/144 Strike Gundam into the Aile Strike Gundam, and the set is also compatible with other HG items! 3mm joints and C-type joint parts are included that can be selected depending on the kit it's used with. A wealth of armaments such as a bazooka and the Grand Slam are also included; you can recreate Perfect Strike Gundam by combining It with the Gundam Option Parts Set 2, sold separately! Order yours today!

[Includes]:

  • Aile Striker (x1 set)
  • Beam saber (x2)
  • Energy pack
  • Joint parts (x1 set)
  • Grand Slam
  • Bazooka
  • MMI-M1001 90mm anti-aircraft shotgun

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM38.50
RM38.50 Request Stock
Quick View
img
SAVERM27.40

Gundam Option Parts Set Gunpla 02 (Launcher Striker & Sword Striker) for Entry Grade

This option parts set from Bandai includes everything you need to convert your Entry Grade 1/144 Strike Gundam into Launcher Strike Gundam or Sword Strike Gundam, and the set is also compatible with other HG items! 3mm joints and C-type joint parts are included that can be selected depending on the kit it's used with. The Agni is movable with a ball joint and 3mm joint; the Panzer Eisen comes with a lead wire.  You can also recreate Perfect Strike Gundam by combining It with the Gundam Option Parts Set 1, sold separately! Order yours today!

[Includes]:

  • Launcher Striker (x1 set)
  • Sword Striker (x1 set)
  • Effect parts (x1 set)
  • Joint parts (x1 set)
  • Lead wire

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM38.50
RM38.50 Request Stock
Quick View
img
SAVERM15.90

Gundam Option Parts Set Gunpla 03 (Build Hands Square Shape)

your Gundam model kits with square-fingered hands available in three sizes! Two sets of hands are included in three sizes: small, medium, and large, for a total of 36 hand parts. Includes fists, flat hands, and weapon-holding hands. The weapon-holding hands can use items with a 4mm x 2mm grip, or a 3mm-diameter saber grip. Order yours today!

[Includes]:

  • Hand parts, small (three types each, left and right) (x2)
  • Hand parts, medium (three types each, left and right) (x2)
  • Hand parts, large (three types each, left and right) (x2)

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM27.40

Option Parts Set Gunpla 18 (Build Booster Set)

The Build Booster and Build Booster Mk-II from the "Gundam Build" series are now available as a set! Combine the two boosters to enjoy a variety of customizations!

The Build Booster and Build Booster Mk-II can transform from a fighter to a backpack form.
The backpack form can be attached to various mecha using the included joints.
Each part can be removed and used as a weapon.
Parts other than weapons can also be customized into various Gunpla using the included joint parts.


Order yours today!

[Includes]:
- Build Booster
- Build Booster Mk-II

RM38.50
RM38.50 Request Stock
Quick View
img
SAVERM1.50

PVC Pla Plate thinness 0.5 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVB Pla Plate for Gunpla Modification or Customization


Thinness : 0.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM2.00
RM2.00 Request Stock
Quick View
img
SAVERM2.50

PVC Pla Plate thinness 1.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVB Pla Plate for Gunpla Modification or Customization


Thinness : 1.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM3.00
RM3.00 Request Stock
Quick View
img
SAVERM2.50

PVC Pla Plate thinness 1.5 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 1.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC "Pla Plates" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional "Pla Plate" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM4.00
RM4.00 Request Stock
Quick View
img
SAVERM1.00

PVC Pla Plate thinness 2.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVB Pla Plate for Gunpla Modification or Customization


Thinness : 2.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM6.50
RM6.50 Request Stock
Quick View
img

PVC Pla Plate thinness 3.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 3.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM9.00
RM9.00 Request Stock
Quick View
img
SAVERM3.10

ABS Pla Plate thinness 5.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 5.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

ABS (Acrylonitrile Butadiene Styrene) Plate
ABS is favored for parts that need to withstand mechanical stress or heat. 

Best for: Custom weapons, inner frames, or joints that might rub against other parts.

Handling: It is more elastic than standard styrene, meaning it is less likely to shatter if dropped. However, it is harder to bond with standard hobby cement; you should use ABS-specific cement or super glue.

Warning: Certain \"pour-type\" panel line markers can make ABS brittle and cause it to crack if applied directly to the bare plastic.

RM13.80
RM13.80 Request Stock

Showing 181 - 210 of 473 products