Price Clear







Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 151 - 180 of 474 products

img
PO PriceRM28.00

Option Parts Set Gunpla 17 (Binder Gun)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUL 2025
Estimate arrival : AUG 2025

- P-O Price RM28.00
- Deposit RM10.00, Balance RM18.00
- We will inform to make balance RM18.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
The 17th in the Option Parts Set Series is the Binder Gun! By using the included joint parts, you can change into a variety of weapon modes!!
By attaching it to the backpack, it can be equipped as a binder that strengthens posture control capabilities.
By attaching a grip to the binder part, it can be switched into sword mode and rifle mode.
Numerous joint parts are included, and by combining them, it can be turned into a binder gun.
Try attaching it to the HG series while imagining various battles.

[Accessories]
  • 2 each of binder parts (large and small)
  • 1 gun part
  • 1 set of joint parts

DEPOSIT: RM10.00
DEPOSIT: RM10.00 Add to cart
img
PO PriceRM130.00

TAMASHII EFFECT THUNDER Blue Ver. for S.H.Figuarts

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : JUL 2025
Estimate arrival : AUG 2025

- P-O Price RM130.00
- Deposit RM50.00, Balance RM80.00
- We will inform to make balance RM80.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Introducing Blue Lightning to bring out the colors of various characters!

The highly versatile Blue Lightning fits a variety of characters!
From the hugely popular Tamashii Effect series comes the re-release of Tamashii Effect THUNDER, a replica of thundering lightning. The lightning is made up of 6 parts, each of which can be combined with a separately sold figure to recreate a variety of different scenes.
*Figure and pedestal set are not included with this product.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Request Stock
img
SAVERM23.95

1/144 System Weapon 002 (Gundam Model Kits)

  • Accessories: Beam Rifle, Heat Hawk, a dedicated rack parts
  • P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

RM48.00
img
SAVERM5.90

[Builder Parts] 1/144 MS Funnel 01

- Enhancement parts for local conflicts 
- MS funnel containers A and MS funnel containers B are in the set.
- The funnels of containers A are detachable.

Accessories:

- Funnel Container A x 2
- Funnel Container A (Funnels) x 6
- Funnel Container B x 2

RM24.00
img
SAVERM9.90

[Builder Parts] MS Sight Lens 01 (Pink)

[Builder Parts] MS Sight Lens 01 (Pink)


Includes:
2.5 MS Lens x 3
3.0 MS Lens x 3
3.5 MS Lens x 3
4.0 MS Lens x 3
5.5 MS Lens x 3
Seed x 3 Each

Item Suze / Weight: 25 x 17 x 1.2cm / 40g

RM20.00
img
SAVERM20.90

RG Strike Freedom Wing of Light (Wing Accessories)

  • This package contains 'light' wing effect for 1/144 RG strike freedom gundam only.
  • RG 1/144 Strike Freedom Gundam is not included in this package and sold seperately.
  • Initial released comes with 8 pieces of Dragoon effects in the package.
  • THIS IS NON-BANDAI PRODUCT.

RM12.00
img
SAVERM13.28

[Builder Parts] Non Scale MS Thruster 01

Product details: A basic type × 2 (small), basic type A × 2 (large), basic type B × 2 (small), Basic type B × 2 (large), Horizontal type × 2 (small), type Horizontal × 2 (large), round type × 2 (small), Round type × 2 (large)

RM22.70
img
SAVERM11.00

[Builder Parts] MS Blade 01

    Comes with
  • 3 different types of Rod Blades (Big and Small, 2 each)
  • 4 different types of Blade Fins (Big and Small, 2 each)
  • 6 different types of Blade Antennas (Big and Small, 2 each)

RM18.90
img
SAVERM24.90

1/144 System Weapon 001 (Gundam Model Kits)

- Start the fun part for further expansion Gundam series!
- By releasing a variety of extension parts, and propose modifications to exhibit examples of Gundam! The Gundam
Rent on the experience gained, the Gundam world, assembling a kit of Gundam and made
The new brand for the enjoyment of the game spread further.
- First in some pre-assembled kit system Weapon series.
- Dedicated rack accessories!
- Parts can be supplied with variation in recombination?
- Beam Gatling Gun ... type proximity type fire suppression, type of assistance
Early-type Zaku machine gun machine gun. -   Mounting Type antiaircraft ammunition magazine, late-type machine gun

RM48.00
img
SAVERM13.28

[Builder Parts] MS Tank 01

  • Product details: tank × 2 (small), tank × 2 (large)
  • suitable for 1/144 scale

RM22.70
img
SAVERM25.95

1/144 System Weapon 008 (Gundam Model Kits)

  • Accessories: Hyper Mega Launcher, Hyper Mega Launcher for customized parts, beam spray gun, beam spray gun for customized parts, racks, hand parts × 6.
  • P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

RM52.00
img
SAVERM26.55

1/144 System Weapon 004 (Gundam Model Kits)

  • Accessories: Long-range beam rifle, sword Heat (Gouf custom type), rack-only parts
  • P/S: This package only consists of accessories only, gundam model kit showed in picture is illustration of usage and exclude in this package.

RM45.40
img
SAVERM74.70

[DIAN CHANG] Metal Build Alloy Inner Frame for MG 1/100 Banshee (Gun Metal)

  • Metal Build Alloy Inner Frame for MG 1/100 Banshee Gundam
  • The original Unicorn Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG Unicorn Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM135.00
img
SAVERM15.90

30 Minutes Sister Option Body Parts Type S01 (Color A)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Here's a set of summer-themed optional body parts for your 30MS (30Minutes Sisters) figure model kits from Bandai! These parts are equipped with the 3mm joint common to 30MS figures, so you can swap and exchange these parts with your 30MS figures to give them a refreshing new look for summertime! Order yours now!

[Includes]:

  • Body parts (x1 set)
  • Joint parts (x1 set)

RM32.00
img
SAVERM49.00

[Metal Part] RG 1/144 MSN-04 Sazabi Metal Enhancement Part Set

[Metal Part] RG 1/144 MSN-04 Sazabi Metal Enhancement Part Set

It contain 19 types of metal parts for RG 1/144 MSN-04 Sazabi Zaku II to enhance

1. Red Eye Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Shoulder Part Thruster x 3 pair
4. Hydraulic Piston x 4
5. Hand Part - 5.0 mm Flat Head Armored Screw x 4 units
6. Hand Part - 6.0 mm Flat Head Armored Screw x 4 units
7. Main Thruster x 1 Unit
8. Secondly Thruster x 1 Set
9. Side Thruster x 1 Set
10. Bottom Thruster x 1 Set
11. Aviation Hole 1.6 mm x 1 Set
12. Aviation Hole 3.0 mm x 2 units
13. 5.0 mm Flat Head Armored Screw x 2 units
14. Joining Angle Detailing Enhancement Part x 2
15. 6.0 mm Flat Head Armored Screw x 4 units
16. Leg Main Thruster x 1 Set
17. Leg Side Thruster x 3 Set
18. Flat Head Screw 2.0 mm x 1 Pack
19. Metal detailing sticker

RM99.00
img
SAVERM52.00

[Metal Part] MG 1/100 MS-06J Zaku II Ver.2.0 (WHITE OGRE) Metal Enhancement Part Set

[Metal Part] MG 1/100 MS-06J Zaku II Ver.2.0 (WHITE OGRE) Metal Enhancement Part Set


It contain 10 types of metal parts for MG 1/100 MS-06J Zaku II Ver.2.0 (WHITE OGRE) to enhance

1. Red Eye Zaku Metallic Lens x 1
2. Energy Pipe on Head M Size x 1
3. Energy Pipe on Waist  L Size x 1
4. Backpack Thruster, C1 x 2 set
5. Arm Side / Shoulder Thorn Metal Spikes x 3 
6. Energy Pipe on Leg L x 1
7. Aviation Hole 1.6 mm x 15
8. Aviation Hole 2.0 mm x 15
9. Metal Silver Bead Ball 1.5 mm x 50
10. Flat Head Screw 2.0 mm x 30 

RM68.00
img
SAVERM47.80

30MS OPTIONAL HAIRSTYLE PARTS VOL.1: 1BOX (4PCS SET)

This set of four different interchangeable hairstyles for your 30MS (30 Minutes Sisters) figure will enable you to give her a whole new look in no time! Order yours today!

[Set Contents]:

  • Pink long twintails
  • Yellow short twintails
  • Short hairstyle 1 (red)
  • Short hairstyle 2 (navy blue)


Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

RM96.00
img
SAVERM10.00

[DIAN CHANG] Bandai MG 1/100 Barbatos Diecast Skeleton Conversion Metal Parts (Free Alloy Antenna)

Brand : Dian Chang
For Model : Bandai MG 1/100 Barbatos

Note : First batch free Alloy Antenna

The original Master Grade Barbatos Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
Through the package modification, the effect of the finished diecast Barbatos model can be simulated, and the problem of easy plastic fatigue of the original part is reduced.

RM128.00
img
SAVERM24.80

[TLX] Metal Build Alloy Inner Frame for RG 1/144 RX-93 Nu Gundam (TLX-01)

  • Metal Build Alloy Inner Frame for RG RX-93 Nu Gundam
  • The original RG RX-93 Nu Gundam design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast RG RX-93 Nu Gundam model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM95.00
img
SAVERM20.00

EW RG 1/144 Artificial Human Evangelion Universal Weapons and Equipment Set (Model Kit is not include)

RG 1/144 Artificial Human Evangelion Universal Weapons and Equipment Set 
(Model Kit is not include)

Brand : Third party Brand
Special Design for : RG Series Artificial Human Evangelion

RM118.00
img
SAVERM1.30

ABS Pla Plate thinness 0.3 mm (20 cm x 25 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 0.3 mm
Size : 20 cm x 25 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM1.50
img
SAVERM1.00

ABS Pla Plate thinness 0.5 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 0.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM2.50

ABS Pla Plate thinness 0.8 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 0.8 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM3.50
img
SAVERM15.90

30MS Option Body Parts Type S02 (Color B)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Here's a set of summer-themed optional body parts for your 30MS (30Minutes Sisters) figure model kits from Bandai! These parts are equipped with the 3mm joint common to 30MS figures, so you can swap and exchange these parts with your 30MS figures to give them a refreshing new look for summertime! Order yours now!

[Includes]:

  • Body parts (x1 set)
  • Joint parts (x1 set)


RM32.00
img
SAVERM15.90

30MS 30 Minutes Sister OB-11 Option Body Parts Arm Parts & Leg Parts (Color C)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Give your favorite 30MS (30Minutes Sisters) figures a refresh with these optional parts! This set is in the same color as 30MS SIS-A00 Luluche (Color C) (sold separately). Expressive hand parts are included, as are arms and legs; two types of neck parts are included so she'll be able to move her head side to side, or backward and forward! Unpainted face parts are also included so you can create your own custom facial expressions. Order yours today!

[Includes]:

  • Unpainted face (x1 set)
  • Neck parts (x1 set)
  • Arm parts (x1 set)
  • Leg parts (x1 set)
  • Hand parts (x1 set)

RM32.00
img
SAVERM13.90

30 Minutes Sister Optional Body Parts Type S03 (Color C)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Here's a set of summer-themed optional body parts for your 30MS (30Minutes Sisters) figure model kits from Bandai! These parts are equipped with the 3mm joint common to 30MS figures, so you can swap and exchange these parts with your 30MS figures to give them a refreshing new look for summertime! Order yours now!

[Includes]:

  • Body parts (x1 set)
  • Joint parts (x1 set)


RM34.00
img
SAVERM25.90

1/144 System Weapon 005 (Gundam Model Kits)

Giant Gatling Gun and E.F.F. Long Shield for your 1/144 Gundam kits! 

RM52.00
img
SAVERM20.00

[Roast Duck Model] Metal Build Alloy Inner Frame for MG 1/100 Hi Nu Gundam Ver. Ka

  • Metal Build Alloy Inner Frame for MG 1/100 Hi Nu Gundam Ver. Ka
  • The original MG 1/100 Hi Nu Gundam Ver. Ka design is more complicated and delicate, and the strength and texture are improved by diecast alloy and POM materials in the package. 
  • Through the package modification, the effect of the finished diecast MG 1/100 Hi Nu Gundam Ver. Ka model can be simulated, and the problem of easy plastic fatigue of the original part is reduced. 
  • However, this modification does not completely solve all the problems of the original.

RM125.00
img
SAVERM51.70

Bandai Tamashii Effect Thunder Yellow Ver.

- Soul was reproduced lightning roar EFFECT appeared !!

- Popular than soul EFFECT series, soul EFFECT THUNDER that reproduces the lightning roar appeared.
- Lightning is made up of all six parts, is assembled each to figure, able to reproduce the various scenes.
-.. Blue Ver and Yellow Ver simultaneous deployment in two colors.

- The set includes: body

RM110.00

Showing 151 - 180 of 474 products