Price Clear







Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 1 - 30 of 476 products

img
SAVERM3.60

[Metal Part] 4mm Zaku metallic Lens - Gold Colour

  • Diameter: 4.0mm
  • Gold colour lens
  • Thickness: 2.6mm
  • Material made: Copper
  • Suitable to fit on Bandai MG zaku 2.0 model kits

RM2.40
img
SAVERM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Gold Colour

  • Modelling Kits Gatling Gun Bullet Chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
img
SAVERM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Silver Colour

  • Modelling Kits Gatling Gun Bullet Chain - silver colour chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
img
SAVERM9.49

[Metal Part] Modelling Kits Gatling Gun Bullet Chain - Black Colour

  • Modelling Kits Gatling Gun Bullet Chain - black colour chain
  • Width:8mm, Length 200mm
  • Suitable for installation on this kits: Unicorn Gundam gatling gun, Heavy armor gatling gun, MG 1/100 MS-07B-3 Gouf Custom gatlin gun
  • Gatling Gun NOT INCLUDED

RM8.50
img
SAVERM16.30

MG Strike Gundam Metal Blade Part

  • MG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM23.60
img
SAVERM1.10

ABS Rod 240mm Long (mix 17pcs - circle, square) for DIY customize Model Kit

Material: ABS

Shapes:  Round, Square, Annulus (With Holes), Square (With Holes)

Package Contents :
-----------------------
Round rod
1. Diameter : 0.5mm+- ,Length : 24cm+-
2. Diameter : 1.0mm+- ,Length : 24cm+-
3. Diameter : 2.0mm+- ,Length : 24cm+-
4. Diameter : 3.0mm+- ,Length : 24cm+-
5. Diameter : 5.0mm+- ,Length : 24cm+-

Square rod
1. Diameter : 1.0mm+- ,Length : 24cm+-
2. Diameter : 1.5mm+- ,Length : 24cm+-
3. Diameter : 2.0mm+- ,Length : 24cm+-
4. Diameter : 3.0mm+- ,Length : 24cm+-
5. Diameter : 5.0mm+- ,Length : 24cm+-

Annulus (With Holes)
1. Diameter : 2.0mm+- ,Length : 24cm+-
2. Diameter : 3.0mm+- ,Length : 24cm+-
3. Diameter : 4.0mm+- ,Length : 24cm+-
4. Diameter : 5.0mm+- ,Length : 24cm+-

Square (With Holes)
1. Diameter : 3.0mm+- ,Length : 24cm+-
2. Diameter : 4.0mm+- ,Length : 24cm+-
3. Diameter : 5.0mm+- ,Length : 24cm+-

RM13.90
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1.5 mm diameter

RM3.00
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S10, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S10)

  • Specifications : Maximum diameter 8mm, Height 3mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B2, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B2)

  • Specifications : Maximum diameter 6.0mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B9, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM4.00

[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N3)

  • Specifications : Maximum diameter 10.0mm, Height 10.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM13.00
img
SAVERM3.70

[Metal Part] Metal Thruster / Vents for Gundam Kit (N4, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N4)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM14.30
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (N5, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N5)

  • Specifications : Maximum diameter 6.0mm, Height 3.0mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM6.50
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S7, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S4, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S4)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S9, Silver, Red) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5mm, Joint hole Diameter 2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM11.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S3, Silver) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S2)

  • Specifications : Maximum diameter 9.0mm, Height 8.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal parts is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 2.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2.5mm diameter

RM3.80
img
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 3.0mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 3.0mm diameter

RM3.80
img
SAVERM10.90

Customized Effect (Slashing Image Ver.) [Green]

Release Date: October 2020
Arrival Date: November 2020
  • Introducing the best effect for 1/144 scale!
  • Anyone can easily create original battle scenes! 
  • Slashing effect is now available in the customized effects series!
  • Produce the image of slashing. The color is green.
  • A set of effect parts and joint parts.
[Accessories]
Effect parts x1 set
Joint parts x1 set

RM19.00
img
SAVERM3.00

DDB MGEX Strike Freedom Gundam Wing Of Light Option Set

MGEX Strike Freedom Model kit and Action Base are Sold Separately

Content:

- Wing of Light x 1 set
- Dragoon Launching Effect Part x 8
- Dragoon Jet Effect Part x 8
- Dragoon Connector x 8
- Dragoon Connector for Action Base x 8
- Dragoon Backpack Connector x 1

RM75.00
img
SAVERM4.00

[Effect Wing] EW HWS Expansion Set and Tactical Armor Transporter for RG nu Gundam

[EW RG 1/144 nu Gundam HWS  Expansion Parts and Tactical Armor Transporter


Set Details:
- Armor Transporter Carrier
- Chest Armor Unit
- Front Armor Unit
- Leg Armor & Thruster Unit
- Shoulder Mounted Missile Launcher
- Hyper Mega Shield
- Hyper Mega Rifle
- Water Slide Decals
- Fin Funnels Stand & Effects
- Stage Act Base

Brand  : Effect Wing
Scale  :1/144
Grade : RG

RM85.00
img
SAVERM1.30

ABS Pla Plate thinness 1.5 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 1.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM5.50
img
SAVERM3.00

Fin Funnels Effect Set and Beam Rifle for Entry Grade Nu Gundam

Fin Finnels for Entry Grade Nu Gundam (6 pcs) 


- Package include 6 pcs Fin Finnels for Entry Grade 1/144 Nu Gundam After assembled
- 4 pcs plastic runners
- 1 sticker
- 1 Beam rifle
- 1 Beam saber (pinl color straight and curve)
- Assemble manual

* Nu Gundam model kit body is not included
* This is non-Bandai product 
* This product is come without hard paper box.

RM15.90
img
SAVERM16.00

Super Dragoon System for RG Strike Freedom Gundam [Wing Effect Part is not Include]

Super Dragoon System For RG Strike Freedom Gundam 
  • Accessories for RG Strike Freedom Gundam use only.
Package Include :
  • Super Dragoon System (Total 8 Pieces 6.6 cm lenght)
  • 8 set connectors (20.5 cm length)
Notes :
  • Gundam Model Kit is Not Include
  • Action Base is NOT Include
  • Wing Effect is NOT Include
  • This is Non-Bandai product

RM13.90
img
SAVERM2.00

Aile Strike Backpack for Entry Grade Strike Gundam

Aile Strike Backpack for Entry Grade Strike Gundam


- Package include Aile Strike Backpack for Entry Grade 1/144 Strike Gundam After assembled
- 4 pcs plastic runners
- 1 sticker
- 1 Beam rifle
- 2 Beam saber (pink color straight)
- Assemble manual

* Strike Gundam model kit body is not included
* This is non-Bandai product 
* This product is come without hard paper box.

RM13.90

Showing 1 - 30 of 476 products