• Home
  • Showing Gundam Parts + CUSTOM PARTS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + CUSTOM PARTS product(s)

Showing 1 - 30 of 463 products

Quick View
img
SAVERM14.90

[Builder Parts] 1/144 MS Hand 04 (Federation/L Size)

[Builder Parts] 1/144 MS Hand 04 (Federation/L Size)

The official conversion parts for adding detail to your Gunpla!
This set is ideal for larger HGUC kits, such as Nu Gundam.
The size is 110% of the original MS Hand 01.
fist (L&R) x2, flat hand (L&R) x2, grip for weapon (L&R) x2, instruction manual x1

Includes: 
  • Open Palm (Left & Right) x 2
  • Close Fist (Left & Right) x 2
  • Weapon Hands (Left & Right) x 2

RM21.00
RM21.00 Add to cart
Quick View
img
SAVERM15.30

[Metal Part] MG 1/100 Hi-Nu Gundam Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.LED + 2 batteries x1direct installation
2.Vulcan Canon x2drill 1.3mm hole, attached to point with minor cement
3.Backpack + Calf thruster x4drill 2.0mm hole, attached to point with minor cement
4.Shoulder heavyarm screw x4drill 1.0mm hole, attached to point with minor cement
5.Forearm aviation hole x4drill 1.0mm hole, attached to point with minor cement
6.Metal hand joint cover (round shape) x4Direct installation, attached to point with minor cement
7.Chest Aviation hole x2drill 2.5mm hole, attached to point with minor cement
8.Metal knee joint cover (round shape) x4drill 1.0mm hole, attached to point with minor cement
9.Metal knee joint Hydraulic tube (round shape) x4drill 1.0mm hole, attached to point with minor cement
10.Knee and lower aviation hole x8drill 3.0mm hole, attached to point with minor cement
11.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Canon nozzle x1drill 2.0mm hole, attached to point with minor cement
12.Shield Aviation hole x12drill 2.0mm hole, attached to point with minor cement
13.Armor screw x10direct installation, attached to point with minor cement
14.Armor Screw 1.5mm x30drill 2.0mm hole, attached to point with minor cement
15.Armor aviation hole 1.6mm x15drill 1.6mm hole, attached to point with minor cement
16.Armor aviation hole 1.5mm x50drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM88.40
RM88.40 Add to cart
Quick View
img
SAVERM30.20

[Metal Part] RE 1/100 Gundam Mk III Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index        Parts                                                 Installation
1.                Rear Thruster x3                         drill 2.5mm hole, attached to point with minor cement
2.                Backpack thruster - x3                 drill 3.5mm hole, attached to point with minor cement
3.                Calf thruster - x2                         drill 1.4mm hole, attached to point with minor cement
4.                Armor aviation hole x15         drill 2.0mm hole, attached to point with minor cement
5.               Single line Screw x30                 drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM73.50
RM73.50 Add to cart
Quick View
img
SAVERM45.20

[Metal Part] RE100 Gundam GP04G Gerbera Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index

Parts

Installation
1.Shoulder thruster x2drill 1.5mm hole, attached to point with minor cement
2.Lower shoulder thruster x8drill 3.0mm hole, attached to point with minor cement
3.Aviation hole on shoulder x3drill 3.0mm hole, attached to point with minor cement
4.Backpack thruster x15drill 2.5mm hole, attached to point with minor cement
5.Aviation hole on armor x15drill 2.0mm hole, attached to point with minor cement
6.Single line screw x30drill 2.0mm hole, attached to point with minor cement
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM58.50
RM58.50 Add to cart
Quick View
img
SAVERM16.30

MG Strike Gundam Metal Blade Part

  • MG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM23.60
RM23.60 Add to cart
Quick View
img
SAVERM10.90

Star Soul Shock Burst Effects For Modelling Kits (Clear Yellow)

Star Soul Shock Burst Effects For Modelling Kits 

The new version of Burst and Boom effect parts give you more freedom in setting up your action scenes.

Suitable for 1/144 and 1/100 scale figure / Gundam
5 color for selection for different scenes

- Clear Black 
- Clear Yellow
- Gray
- Red
- Yellow

RM19.00
RM19.00 Add to cart
Quick View
img
SAVERM10.90

Star Soul Shock Burst Effects For Modelling Kits (Clear Black)

Star Soul Shock Burst Effects For Modelling Kits 

The new version of Burst and Boom effect parts give you more freedom in setting up your action scenes.

Suitable for 1/144 and 1/100 scale figure / Gundam
5 color for selection for different scenes

- Clear Black 
- Clear Yellow
- Gray
- Red
- Yellow

RM19.00
RM19.00 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S10, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S10)

  • Specifications : Maximum diameter 8mm, Height 3mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S7, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S2, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S2)

  • Specifications : Maximum diameter 9.0mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S4, Silver, Red) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S4)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM6.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (S5, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S5)

  • Specifications : Maximum diameter 9.2mm, Height 8.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM12.70
RM12.70 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S6, Silver) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S6)

  • Specifications : Maximum diameter 11mm, Height 9.5mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal are Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (S9, Silver, Red) (2 Units)

[Metal Part] Silver Metal Thruster Vents (S7)

  • Specifications : Maximum diameter 12mm, Height 5mm, Joint hole Diameter 2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External is Sliver plated and internal is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (S3, Silver) (2 Units)

[Metal Part] Silver Red Metal Thruster Vents (S2)

  • Specifications : Maximum diameter 9.0mm, Height 8.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: Both External and Internal parts is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 2.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2.5mm diameter

RM3.80
RM3.80 Add to cart
Quick View
img
SAVERM2.40

[Metal Part] 50pcs - Armor Detail-up 3.0mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 3.0mm diameter

RM3.80
RM3.80 Add to cart
Quick View
img
SAVERM10.90

Customized Effect (Slashing Image Ver.) [Green]

Release Date: October 2020
Arrival Date: November 2020
  • Introducing the best effect for 1/144 scale!
  • Anyone can easily create original battle scenes! 
  • Slashing effect is now available in the customized effects series!
  • Produce the image of slashing. The color is green.
  • A set of effect parts and joint parts.
[Accessories]
Effect parts x1 set
Joint parts x1 set

RM19.00
RM19.00 Add to cart
Quick View
img
SAVERM8.00

RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel

Brand: No Brand
Made in China
Item: RG 1/144 RX-93 Nu Gundam Floating Effect Parts for Fin Funnel
Scale: 1/144

Box contains: 12 pcs effect parts

* Effect parts only, RG 1/144  Nu Gundam and Fin Funnel is NOT included

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM11.90

Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Purple Colour)

Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Purple Colour)

RM24.00
RM24.00 Add to cart
Quick View
img
SAVERM11.90

Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Black Colour)

Thunder Lightning Effect Parts and Damashii Action Base for modelling kits (Black Colour)

RM24.00
RM24.00 Add to cart
Quick View
img
SAVERM19.90

30 Minutes Sister Option Body Parts Type S01 (Color A)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Here's a set of summer-themed optional body parts for your 30MS (30Minutes Sisters) figure model kits from Bandai! These parts are equipped with the 3mm joint common to 30MS figures, so you can swap and exchange these parts with your 30MS figures to give them a refreshing new look for summertime! Order yours now!

[Includes]:

  • Body parts (x1 set)
  • Joint parts (x1 set)

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM12.00

MG Hi-Nu Ver.Ka HS033 Customized Fuel Rod Thruster (1 Pair 2 units)

MG Hi-Nu Ver.Ka HS033 Customized Fuel Rod Thruster (1 Pair 2 units)

Special designed for MG 1/100 Hi-Nu Ver.Ka
Quantity : 1 pair / 2 units

RM48.00
RM48.00 Add to cart
Quick View
img
SAVERM10.00

RG Hi-Nu Ver.Ka HS030 Customized Fuel Rod Thruster (1 Pair 2 units)

MG Hi-Nu Ver.Ka HS030 Customized Fuel Rod Thruster (1 Pair 2 units)

Special designed for RG 1/144 Hi-Nu Ver.Ka
Quantity : 1 pair / 2 units

RM46.00
RM46.00 Add to cart
Quick View
img
SAVERM2.00

RG Sinanju / Sazabi HS018 Customized Fuel Rod Thruster (1 Pair 2 units)

MG Hi-Nu Ver.Ka HS033 Customized Fuel Rod Thruster (1 Pair 2 units)

Special designed for RG 1/144 Sinanju or RG 1/144 Sazabi
Quantity : 1 pair / 2 unitsruster (1 Pair 2 units)

RM36.00
RM36.00 Add to cart
Quick View
img
SAVERM10.00

[Effect Wing] EW HWS Expansion Set and Tactical Armor Transporter for RG RX-93-v2 Hi-Nu

EW HWS Expansion Set and Tactical Armor Transporter for RG RX-93-v2 Hi-Nu


Set Details:
- Armor Transporter Carrier
- Chest Armor Unit
- Front Armor Unit
- Leg Armor & Thruster Unit
- Shoulder Mounted Missile Launcher
- Hyper Mega Shield
- Hyper Mega Rifle
- Water Slide Decals
- Stage Act Base

Brand : Effect Wing
Scale : 1/144

Please note that this is not Bandai product, and the RG Hi-Nu Gundam is not included.

RM89.00
RM89.00 Add to cart
Quick View
img
SAVERM1.00

ABS Pla Plate thinness 0.5 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 0.5 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM2.50
RM2.50 Add to cart
Quick View
img
SAVERM-1.70

ABS Pla Plate thinness 1.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 1.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM4.50
RM4.50 Add to cart
Quick View
img
SAVERM-3.70

ABS Pla Plate thinness 2.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 2.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM19.90

30 Minutes Sister Option Body Parts Arm Parts & Leg Parts (Color A)

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!

Give your favorite 30MS (30Minutes Sisters) figures a refresh with these optional parts! This set is in the same color as 30MS SIS-5G00 Richetta (Color A) (sold separately). Expressive hand parts are included, as are arms and legs; two types of neck parts are included so she'll be able to move her head side to side, or backward and forward! Unpainted face parts are also included so you can create your own custom facial expressions. Order yours today!

[Includes]:

  • Unpainted face (x1 set)
  • Neck parts (x1 set)
  • Arm parts (x1 set)
  • Leg parts (x1 set)
  • Hand parts (x1 set)

RM28.00
RM28.00 Add to cart

Showing 1 - 30 of 463 products