• Home
  • Showing Gundam Parts + WATER DECALS / STICKERS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 421 - 450 of 500 products

Quick View
img
SAVERM8.09

1/144 Scale Earth Federation Decal Sheet

  • Gundam decal sheet recommended for use on HGUC Gundam RX78-2, Guncannon and Guntank kits.

RM3.90
RM3.90 Request Stock
Quick View
img
SAVERM8.09

[Bandai]1/144 scale Zeon Decal Sheet

  • 1/144 Gundam decal sheet recommended for use on HGUC Zaku, Zaku II, Neo Zeong kits.

RM3.90
RM3.90 Request Stock
Quick View
img
SAVERM7.50

Tamiya 87135 Mark Fit (Strong) Decal Solution 40ml Bottle

【 Perfect Decal Application 】　 　


Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

≪How to use≫
1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
6. Allow the decal to completely dry.

RM17.50
RM17.50 Request Stock
Quick View
img
SAVERM8.00

[WATER DECAL] MG Astray Red Frame Kai

  • water decal for gundam astray red frame gundam kai scale 1/100
  • not pre-cut like the bandai slide water decal.

RM9.90
RM9.90 Request Stock
Quick View
img
SAVERM8.90

Tamiya 87102 Mark Fit Decal Solution 40ml Bottle

" Perfect Decal Application "


Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

-  How to use -
1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
6. Allow the decal to completely dry.

RM17.00
RM17.00 Request Stock
Quick View
img
SAVERM5.80

[WATER DECAL] MG Strike Freedom

  • water decal for 1/100 strike freedom gundam
  • not pre-cut like the bandai slide water decal.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM3.90

[Water Decal] HG Astray Red Frame Kai

  • water decal for gundam astray red frame gundam kai scale 1/144
  • not pre-cut like the bandai slide water decal.
  • extra touch of details for modeling kits.

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG Gundam 00 Raiser

  • water decal for 00 RAISER model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG ZGMF-X20A STRIKE FREEDOM Model Kit

  • Third Party Water decal for RG Strike Freedom model kit scale 1/144.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG WING ZERO EW Model Kit

  • water decal for RG Wing Zero EW model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.
  • It's recommended to use this tool when working on decalling: Cutting Matt, Tweezer, Empty swallow bottle with water, hobby k-nife, softening solution.
  • Apply a clear gloss surface before applying decal would be a good choice.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM11.00

PG Strike Freedom model kit gold color decal

  • Gold color decal for PG Strike Freedom Gundam Model kit.
  • Not pre-cut like the bandai slide water decal.
  • Extra touch of details for modeling kit

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM5.89

[Water Decal] MG ZGMF-X42S Destiny Gundam Water Decal

- Water decal for HG / MG warning sign water decal - RED color
- Not pre-cut like the bandai slide water decal
- Extra touch of details for modeling kit

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.89

[WATER DECAL] MG PMX-003 The-o

[WATER DECAL] MG PMX-003 The-o

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM15.48

[Water Decal] Z260 MG Duel Assault Gundam GAT-X102 Water Decal

- Water decal for MG Duel Assault Gundam 
- Not pre-cut like the bandai slide water decal.
- Extra touch of detail for modeling kits

RM14.50
RM14.50 Request Stock
Quick View
img
SAVERM5.89

[Water Decal] HG RX-0 Unicorn Water Decal

  • Water decal for HG RX-0 Unicorn water decal
  • not pre-cut like the bandai slide water decal.
  • extra touch of detail for modeling kits

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM23.88

[Water Decal] Z105 RG MSZ-006 ZETA Gundam

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM14.88

[Water Decal] RG RX-178 MK-II MK2 AEUG Gundam

Water slide decals to be used with various model kits. Contains markings that can be used with its specific character or at your discretion for customizing your own kits!

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM17.18

MG 00 Raiser Gundam Silver Decal

  • silver color decal for MG 00 Raiser Gundam

RM18.80
RM18.80 Request Stock
Quick View
img
SAVERM8.90

Water Decal for RG 1/144 FX550 Sky Grasper

- Water Decal for RG 1/144 FX550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Request Stock
Quick View
img
SAVERM3.10

HD MG Strike Rouge Ver RM metallic decal

  • Dimension 14 cm x 9 cm
  • HD MG Strike Rouge Ver RM metallic decal

RM14.90
RM14.90 Request Stock
Quick View
img
SAVERM5.90

[Water Decal] MG 1/100 Freedom Gundam 2.0

  • MG Freedom Gundam 2.0 water decal

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM1.50

[Water Decal][Bandai] Mobile Suit Gundam The Origin Multiuse 1 (HGUC) #105

[Bandai] Mobile Suit Gundam The Origin Multiuse 1 (GD105)



For HGUC Mobile Suit RX-78-01(N) Gundam, Zaku I Gundam

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Red Zeta

[Da Lin] Water Decal for MG 1/100 Red Zeta


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Red Zeta
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM16.00
RM16.00 Request Stock
Quick View
img
SAVERM14.90

Bandai Water Decal 30MS Minutes Sister Water Transfer Decals Vol.2

This is a sheet of water-slide decals, dry transfers, or self-adhesive stickers for use in detailing anime or science-fiction kits.

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM21.00
RM21.00 Request Stock
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for EVA Neon Genesis Evangelion Model Kits

[Da Lin] Water Decal for EVA Neon Genesis Evangelion Model Kits

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for [Da Lin] Water Decal for EVA Neon Genesis Evangelion Model Kits
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM11.90

[Water Decal][Bandai] Mobile Suit Gundam Zeon MS1 (HGUC) #28

[Bandai] Mobile Suit Gundam Zeon MS1 (GD28)



For HGUC Mobile Suit Zaku Gundam Series, Gouf Gundam

RM18.00
RM18.00 Request Stock
Quick View
img
SAVERM1.50

[Water Decal][Bandai] Mobile Suit Gundam Zeon MS4 (HGUC) #39

[Bandai] Mobile Suit Gundam Zeon MS4 (GD39)



For HGUC Mobile Suit Zaku Gundam Series, Gouf Gundam, Gelgong Gundam

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM9.90

[Water Decal][BANDAI] Gundam Decal (RG) for God Gundam #138

Decals the marking of RG God model kits
Brand : Bandai

  • Cut out desired decal.
  • Dip decal and backing in water. Leave submerged 10-30 seconds.
  • Remove decal from water with tweezers.
  • Gently lift decal off of paper backing with tweezers.
  • Place decal in desired location on model, adjusting with cotton swab if necessary.
  • Apply Mark Setter or Mark Softer as needed.

RM20.00
RM20.00 Request Stock
Quick View
img
SAVERM13.90

Macross Frontier HG 1/100 YF-21 Water Slide Decals

These decals are made especially for Bandai's 1/100-scale HG YF-21! 
It'll make your build even more amazing when you apply these high-quality waterslide decals to your finished kit. Order yours today! 

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

RM28.00
RM28.00 Request Stock
Quick View
img
SAVERM5.00

Bandai Water Decal for Macross Frontier HG 1/100 YF-29 Durandal Valkyrie (Saotome Alto Machine)

These new waterslide decals are made especially for Bandai's new HG model kit of Alto Saotome's YF-29 Durandal Valkyrie from "Macross Frontier"! 

Decals are included for all three forms -- Battroid, Gerwalk and Fighter. Order yours now!

RM27.00
RM27.00 Request Stock

Showing 421 - 450 of 500 products