• Home
  • Showing Gundam Parts + WATER DECALS / STICKERS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 301 - 330 of 500 products

Quick View
img
SAVERM2.10

Gundam Accessories - Glow in the dark Sticker (10cm x 15cm)

Dimension: 10 cm x  15 cm 

Colors: Jade Color under daylight and, grow in the dark. 

Guide: 
1) Let the paper absorb light for 30 minutes to an hour (you may use torch light, or place under the sun), and it may grow it's light for a long time. 

2) Cut the paper to the right size to be used on the gundam, and stick on it, that's it. 

Tips: Stick the foil sticker included in the bandai original gundam box at the back of this product, and follow the size to cut the shape to ease the re-modelling.

RM3.90
RM3.90 Add to cart
Quick View
img
SAVERM13.80

Mr Hobby Mr. Mark Softer

This is a softening agent for slide marks. It has the effect of closely adhering slidemarks to curved surfaces.

  • First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
  • Apply decal over it.
  • Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
  • The decal will stick perfectly, even on uneven or curved surfaces.
  • If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
  • Capacity: 40ML

RM15.10
RM15.10 Add to cart
Quick View
img
SAVERM11.00

Mr Hobby Mr. Mark Setter 40ML

  • Apply the mark setter to the position where decal is to be stuck.
  • Stick a slide mark
  • Spread it evenly and remove water with a swab, etc.
  • Apply the mark softer on it, remove water again.

In the past, Mr. MARK SOFTER was used simply to soften decals. 

However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models. 

First, the area to which the decal will be affixed is painted and the decal is applied. 

After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry. 

Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces. 

It is perfect even for poorly made decals from Eastern European models. 

Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 00 QAN[T] Gundam

- Water Decal for MG 1/100 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM17.18

Water Decal PG 1/60 FX-550 SKY GRASPER

- Water Decal for PG FX-550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 21 cm x 24 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM18.80
RM18.80 Add to cart
Quick View
img
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM15.08

HG 1/144 STRIKE FREEDOM Metal Effect Water Decal

- Water Decal for HG 1/144 Strike Freedom Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 10 cm x 9 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM14.90
RM14.90 Add to cart
Quick View
img
SAVERM8.90

Water Decal RG/ HG 1/144 00 QAN[T] Gundam

- Water Decal for RG/ HG 00 QAN[T] OO?Qan[T] 
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM11.00

[Water Decal][Bandai] Mobile Suit Gundam Iron Blooded Orphans #103

[Bandai] Mobile Suit Gundam Iron Blooded Orphans Water Decal #1 (GD103)

For HGIBO / NG 1/100 Barbatos 

RM18.90
RM18.90 Add to cart
Quick View
img
SAVERM11.90

[Water Decal][Bandai] Mobile Suit Gundam Iron Blooded Orphans Multiuse (HGIBO) #104

[Bandai] Mobile Suit Gundam Iron Blooded Orphans Water Decal #2 (GD104)
For HGIBO / NG 1/100 Iron-Blooded Orphans Series

RM18.00
RM18.00 Add to cart
Quick View
img
SAVERM6.10

Bandai Water Decal #108 HGUC Mobile Suit Gundam ZZ Multiuse

[Bandai] Mobile Suit Gundam ZZ (GD108)



For HGUC Mobile Suit Z Gundam , Gundam ZZ Series 1

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 001 (RED/BLACK)

[Da Lin] 1/100 Caution Water Decal (RED/BLACK)


This is a High Quality Water Decal by Dalin and not a sticker. 
- Water decal for MG Unicorn Gundam 02 Banshee
- Not pre-cut like the bandai slide water decal
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 001 (WHITE/GRAY)

[Da Lin] 1/100 Caution Water Decal (WHITE/BLACK)


This is a High Quality Water Decal by Dalin and not a sticker.
- Water decal for MG Unicorn Gundam 02 Banshee
- Not pre-cut like the Bandai slide water decal
- Extra touch of detail for modeling kits 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 002 (WHITE/GRAY)

[Da Lin] 1/100 Caution Water Decal 002 (WHITE/BLACK) (C002WB)


This is a High Quality Water Decal by Dalin and not a sticker. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for 1/100 Scale Caution 002 (BLACK/RED)

[Da Lin] 1/100 Caution Water Decal 002 (BLACK/RED) (C002BR)


This is a High Quality Water Decal by Dalin and not a sticker. 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] 1/144 and 1/100 Number Sign Water Decal (Black / Red)

[Da Lin] Number Water Decal (BLACK / RED)


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Color : Black / Red
- Suitable for 1/144 and 1/100 Gundam Model Kit in General.
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Strike Freedom Gundam

[Da Lin] Water Decal for RG 1/144 Strike Freedom Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Strike Freedom Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Johnny Ridden Zaku II High Mobility Type

[Da Lin] RG Johnny Ridden Zaku II High Mobility Type Water Decal (RG21)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for Johnny Ridden Zaku II High Mobility Type 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Exia Gundam + Repair II
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 GP01 Gundam + Full Burnern

[Da Lin] RG GP01 Gundam + Full Burnern Water Decal (RG17)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG GP01 Gundam + Full Burnern 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Wing Gundam Zero Custom EW
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Tallgeese I

[Da Lin] Water Decal for RG 1/144 Tallgeese I Water Decal


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG 1/144 Tallgeese I
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG / HG 1/144 GN Arms

[Da Lin] HG / RG 1/144 GN Arms


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for 1/144 scale GN Arms
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM6.00

[Da Lin] Water Decal for RG 1/44 Banshee Gundam (Bronzing Gold Color Coating)

[Da Lin] RG Banshee Gundam Water Decal (Gold) (RG23)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Banshee Gundam Water Decal
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
RM16.00 Add to cart
Quick View
img
SAVERM7.10

[Da Lin] Number Symbol Water Decal (Bronzing Gold Color Coating)

[Da Lin] Number Symbol Water Decal (Bronzing Green Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM7.10

[Da Lin] Alphabet Symbol Water Decal C013 (Bronzing Gold Color Coating)

[Da Lin] Alphabet Symbol Water Decal (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
RM19.90 Add to cart

Showing 301 - 330 of 500 products