• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Brand

Availability

Gundam Model Kits

Showing 1 - 30 of 91 products

Quick View
img
SAVERM62.40

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM87.50
RM87.50 Add to cart
Quick View
img
SAVERM69.70

[005] RG 1/144 Freedom Gundam

  • Freedom Gundam, the main MS of "Mobile Suit Gundam SEED", appears in the RG series. 
  • The forms of its wings are designed on the basis of investigation of real machines, and new frames improve its movability. They add realism on it. 
  • The "Lupus" beam rifle can be attached to the shield and add the stock. 
  • The beam of the Lacerta beam saber is recreated with transparent parts. It can be worn at the waist. 
  • The laminate anti beam shield can be mounted to its arms. 
  • You can recreate its high mat mode and full burst mode. 
  • Realistic decals improve its reality. 
  • runner (includes advanced MS joint) x9, realistic decal x2, instruction manual 

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM69.70

[008] RG 1/144 RX-178 Gundam MK.II (A.E.U.G)

"RX-178 Gundam MK-II", the legitimate successor of ""RX-78 GUNDAM"", appears as the seventh RG model. 
The newly adopted "advanced MS joints" enable to expand the range of motion. 
The outer armor can be attached to the frames after assembly, to enjoy the realism of building up the MS. 
Many gimmicks of the RG "real system""can be found such as the opening and closing of the cockpit hatch and more. 
The pipes on its backpack and behind the knees are made of real fabric cords for richer texture. 
Gundam MK-II (Titans) is also released at the same time. 
runner x11, realistic decal x1, instruction manual x1

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM74.90

[010] RG 1/144 Zeta Gundam

  • RG Series A New undergone into new, 10th bullet is memorable Zeta Gundam!
  • RG series that appeared to commemorate the 30th anniversary of Gundam. Two years from the start-up series. Of Gunpla
  • As its 10th anniversary of RG series you should aggregating the technology that can have, the pursuit of real, finally
  • Zeta Gundam appeared -.
  • The actual own investigation RG, accurately reproduced in 1/144 scale mechanisms of Zeta Gundam!
  • Adopt a new joint MS Advanced mode.
  • Comes with realistic decals.
  • Accessories: beam rifle, shield, grenade x 2, beam saber x 2,
  • Shield launcher, action-based support joint 2, 1/144 pilot figure (Camille)

RM105.00
RM105.00 Add to cart
Quick View
img
SAVERM62.40

[016] RG 1/144 MSM-07S Zgok (Char Custom)

  • The 16th of the RG series is an amphibious MS "CHAR'S Z'GOK". 
  • Realizes the streamline form in order to reduce the friction of water and speed up. 
  • Its unique interior frame is designed for an amphibious MS to dive into water or fight battles on the ground. It is realized with advanced MS joints. 
  • Sonar to search and detect enemies, and measure objects under water is adopted. 
  • Considering going under water and surfacing, the weep holes are molded throughout the whole body. 
  • The cockpit is designed spherically for waterproof and pressure resistance. 
  • Claws on its arms, which are the most characteristic weapon, are designed in the image of well honed sword. 
  • The propellers in its legs and back pack are recreated. They make it possible to move to various directions under water. 
  • Runner x8, Realistic decal x1, Instruction manual x1 

RM87.50
RM87.50 Add to cart
Quick View
img
SAVERM61.40

[017] RG 1/144 Wing Gundam Zero Custom EW

  • "Wing Gundam Zero EW" as Real Grade featuring detail is reproduced through the utilization of actual techniques, an investigation of the settings, and a new interpretation of the properties of the machine. 
  • The structure of the main wing is based on material technologies used in real aircraft. 
  • Considering the heat-resistance and machine protection during atmosphere entry, the armored structure for the interior of the wings is designed using a pinnate mold. 
  • The main wing section utilizes cutting-edge aircraft and combat aircraft technology and is designed to have a movable structure. Closely resembling a bird's wings, each section of the curved "flexible wings" is capable of moving in 3-dimensions. 
  • The "Zero Frame", which can move by itself, is designed through consideration of the internal structure of the latest autonomous robots. 
  • The utilization of new Advanced MS Joints permits human-like movements. 
  • The Twin Buster Rifle Combination Mechanism can be reproduced. 
  • Runner x9, Realistic decal x1, Instruction manual x1 

RM87.50
RM87.50 Add to cart
Quick View
img
SAVERM74.88

[018] RG 1/144 Gundam 00 Raiser

  • GW large items following the Exia! Exist beyond the Gundam [Raiser] appeared in the RG!
  • The three-dimensional the Raiser of Real grade unique incorporate a new interpretation, while based on the actual historical research!
  • deep the aircraft characteristics from modern technology
  • Is a characteristic of the aircraft [GN DRIVE] is interpreted as a propulsion engine energy transfer institution. The design of real technology and promotion agencies and high-voltage power transmission line of exploration satellite captured in design.
  • GN DRIVE is fitted with click-type arm of. Can be freely angle adjustment. It is also possible to make the particle storage tank type that appeared in the movie version in the selection formula.
  • Proportion of considering the setting
  • Double O adopted the same Advance de MS joint and Exia is in a high-end models of Exia. While reproduce the successor machine design line in a common joint, and reproduce the distinctive form that is expressed in more Massive.
  • Precision reproduction of Raiser
  • Raiser is equipped with a slide mechanism to wing part, emphasized the linear design-conscious of real stealth fighter. A new interpretation plus actual aircraft in connection part and armed when combined with the body in reference, add a delicate mold.
  • The fully reproduce a variety of armed
  • GN Sword II, GN shield, GN Sword III, GN beam saber is included. Through the joint, can be mounted on the waist or shoulder portion, and the like. And equipped with each armed, sword play action in the play can be reproduced.
  • Each rifle mode, of course GN twin lance form can be replicated. The GN shield concatenates 2 chome, it also possible to braid is equipped on both arms.
  • Accessories: GN Sword II x 2, GN beam saber x 2, GN shield, GN Sword III, riser Sword effect, pilot figure (Setsuna, Suna?)

RM105.00
RM105.00 Add to cart
Quick View
img
SAVERM69.70

[019] RG 1/144 Gundam Astray Red Frame

  • Adopted the inner frame system "The Advanced MS Joint". 
  • Inner frames and outer armor move relative to each other, just like real human. 
  • The finely color-coded parts can express the shades without painting. 
  • Luster of metal can be expressed with realistic decals. 
  • Includes various marking stickers. 
  • The Japanese sword "Gerbera Straight", is silver color plated. The pattern on the blade is also reproduced. 
  • Includes a beam rifle, beam sabers and a shield. 
  • Runner x9, Realistic decal x1, Instruction manual x1

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM69.70

[020] RG 1/144 Wing Gundam EW

  • An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
  • With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
  • Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
  • Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
  • Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RM98.00
RM98.00 Add to cart
Quick View
img
SAVERM94.60

[022] RG 1/144 Sinanju

- Leaders of the [with sleeves], of crimson that Full Frontal to boarding MS` Sinanju `finally appeared at RG!

- RG POINT1: flexible thruster
Production enhancement of flexible thruster designed arranged by the actual historical research. Evolution to a more Gimikaru structure. Open and close while the medium mechanical exposed.

- RG POINT2: texture representation
Reproduce the whole body to arranged a gold patterned portions `engraved` in the plating and parts division. The underlying red molded color gloss injection specification. Beautiful glow of just Sinanju assemble enters the hand.

- RG POINT3: thrusters armor slide gimmick equipped
Thrusters of whole body equipped with a gimmick that the armor part to slide. Produce a mechanical sense of mechanical visible production.

- RG POINT4: high density detailing
Reflected in the whole body mechanical the Hajime Katoki dense detail design by draw down Mr..

- Reproduction of the armed
Equipment of Sinanju is included. Shield also adopted the engraving process. Back also detail reproduction.

- Accessories: beam rifle, beam saber, beam ax, shield, beam effect parts x— 3 types, weapons possession (left and right), palm (left)

( This is a machine translation. Please allow for possible misinterpretations in the text. )

Item Size : 31 x 20 x 11 cm

RM133.00
RM133.00 Add to cart
Quick View
img
SAVERM74.70

[024] RG 1/144 Gundam Gold Frame Amatsu Mina

RG 1/144 Gundam Astray Gold Frame Amatsu Mina


  • Descent to the guardian angel gold frame heaven Mina in the sky of the declaration] from the super popular Gaiden [Mobile Suit Gundam SEED ASTRAY] is RG!
  • RG POINT 1: reproduction of by the new gimmick [Maganoikutachi] -
  • Development and expansion and contraction gimmick mounted in [Maganoikutachi] back.
  • Telescopic mechanism is detail on the basis of the mechanism, such as a real machine of the actuator, reproduce the gimmick.
  • Reproduce the deployment to the storage and front to back.
  • Strengthening `grab` mechanism for as Grapple.
  • Arm movable, expansion and contraction is equipped with the RG own mechanism.
  • RG POINT 2: A new design by own actual historical research -
  • RG POINT 3: realistic armor part texture of heaven Mina -
  • RG POINT 4: first three-dimensional at 1/144 a spear-like weapon of offense and defense together [Okitsunokagami] -
  • Blade and beam shield is reproduced in clear plastic.
  • RG POINT 5: reproduce a variety of equipment of heaven Mina -
  • accessories
- Otsukinokagami × 1
- Torikerosu Kai × 1
- Totsukanotsurugi × 2
- Tsuruhanotachi × 1
- Maganoshirahoko × 2

RM105.00
RM105.00 Add to cart
Quick View
img
SAVERM94.60

[025] RG 1/144 RX-0 Unicorn Gundam

RG 1/144 RX-0 Unicorn Gundam

In the fall of 2017, a 1/1 scale RX-0 Unicorn Gundam will be installed at the Diver City Tokyo Plaza shopping center, and to commemorate the event, Bandai is bringing out this amazingly detailed RG Unicorn Gundam!  It features an advanced inner framework, and it can transform between Unicorn mode and Destroy mode. 

Accessories:
- RG 1/144 Unicorn Gundam parts
- Beam Magnum
- Shield
- 2 beam sabers
- Hyper Bazooka
- Sticker sheet
- Instructions

RM133.00
RM133.00 Add to cart
Quick View
img
SAVERM107.10

[027] RG Unicorn Gundam 02 Banshee Norn

[027] RG Unicorn Gundam 02 Banshee Norn

Accessories: 
Beam Magnum x 1, 
Revolving Launcher x 1, 
Armed Armor DE x 1, 
Armed Armor XC x 1, 
Beam Saber x 2

RM150.50
RM150.50 Add to cart
Quick View
img
SAVERM141.90

[030] RG 1/144 Full Armor Unicorn Gundam

The unicorn Gun dam now comes with its full armor armaments! it has been equipped with beam Gatling guns, hard grenades and other weapons. Even with all of the new armor parts attached the unicorn can still create dynamic action poses. It also comes with the hyper beam javelin from the TV opening, it can also fold to be stored away. The giant propellant tanks also come with newly designed parts to recreate and support their massive size. Support stands are also included for stable display. 

Accessories:

- Beam Magnum
- Hyper Bazooka x 2
- Beam Javelin
- Hand Grenade x 8
- Grenade Launcher x 2
- Beam Gatling Gun x 6
- Base for propellant tanks x 2
- Beam Saber x 2
- Shield x 3

RM199.50
RM199.50 Add to cart
Quick View
img
SAVERM112.10

[036] RG 1/144 Hi-ν Gundam Hi-Nu Gundam

  • Hi-? Gundam that appears in "Mobile Suit Gundam Char's Counterattack Beltorchika Children" has appeared in RG in pursuit of new interpretation of detail expression and reality!
  • Equipped with a multi-link gimmick that slides the armor in conjunction with the movement of each joint. The armor of each part can be slid to expose the mechanical internal frame.

[Accessories]
  • Beam rifle x 1
  • New Hyper Bazooka x 1
  • Shield x 1
  • Beam saber (handle x 3, beam blade x 2)
  • Hand parts (left and right) x 3 types each
  • Weapon holder (Right) x 1 type
  • Realistic decal x 1

RM157.50
RM157.50 Add to cart
Quick View
img
SAVERM2.00

Third Party Brand RG #37 1/144 God Gundam

Third Party Brand RG #37 1/144 God Gundam


Brand : Third Party
Model : God Gundam
Scale : 1/144
Grade : Real Grade

Please note that this is Not-Bandai product

RM46.00
RM46.00 Add to cart
Quick View
img
SAVERM87.20

[037] RG 1/144 God Gundam

Bandai RG 1/144 God Gundam

-From [Mobile Fighter G Gundam], [God Gundam] is now available in RG! Pursuing a structure close to the human body, achieving the largest range of motion in RG history!

-Pursuing movement as if tracing the human body unique to mobile fighters.
-With the advanced MS joints introduced on the shoulders and wrists, you can reproduce the characteristic [arms folded] pose.
-Introduced a mechanism that can move greatly back and forth and left and right on the fuselage. A telescopic gimmick is mounted on the shoulder to secure a range of motion on the side.
-A 3-axis movable structure is used for the neck. Movements such as pulling the chin and sticking out the face are possible.
-The expansion and contraction of the muscles that occur in the human body when bending the knee is expressed by denting a part of the back peach parts. The axis where the knee armor sinks is adopted, and the movement just like the human body is reproduced.
-A new mechanism is used to move the toes, allowing the feet to touch the ground while opening the legs almost horizontally.
-Multi-stage movement from the chest to the waist, and by introducing a slide mechanism to the hip joint, it is possible to kick up the legs while flipping up the waist front armor.
-The movable axis at the base of the fin allows the fin to flutter behind.
-The base of the nail and the thumb cover are equipped with a movable axis to reproduce the god finger.
-Comes with an original arrangement of the sun ring effect.

[accessories]
? God slash x 2
? Hand parts x 1 set
? Joint for connecting the sun wheel effect x 1
? PET sheet (sun wheel effect) x 1 set
? Realistic decal x 1

RM122.50
RM122.50 Add to cart
Quick View
img
SAVERM104.60

[38] RG 1/144 Gundam Epyon

The mighty Gundam Epyon from "Mobile Suit Gundam Wing" gets a completely new Real Grade (RG) model kit from Bandai! It's equipped with a new gimmick that's optimized to help it handle its beam sword powerfully and naturally, plus an amazing all-new original feature allows it to transform into a double-headed pterosaur! Its torso flexibility is better than ever, enabling it to bend forward; the hip joints have a lock mechanism for strong stances. The upper part of the wrist and the forearms are more flexible than before too; the shoulder armor allows Epyon to raise its shoulders while keeping the shoulders in position, enabling it to raise the beam sword with both hands! The blades on its knees will not interfere with kneeling poses, and the height of the wings can be adjusted by moving the base shaft. When in pterosaur mode, its mouths can be opened and closed, and a pull-out ball movement is built into Epyon's shins to serve as the pterosaur's neck joints. An advanced MS joint is adopted for the heat rod for a high degree of flexibility; the cable that connects the beam sword and the mount latch uses a lead wire. This classic robot is now better than ever before thanks to Bandai -- order yours today!

[Includes]:

Beam sword
Beam sword holder
Shield
Heat rod
Hands (x1 set)
Display joint (x2 types, for robot mode & pterosaur mode)
Lead wire
Decals

RM147.00
RM147.00 Add to cart
Quick View
img
SAVERM99.70

RG 1/144 Shining Gundam

* From Mobile Fighter G Gundam, Shining Gundam is commercialized with a transformation into Super Mode unique to RG, which pursues a realistic appearance and movable mechanism!
* Pursuing the movable mechanism of the whole body, Super Mode is reproduced without replacement.
* Transformation to Super Mode of the head does not require replacement.
* Realistic texture and detail are produced when the shoulder cover is deployed.
* Arm cover is equipped with a pull-out and deployment gimmick.
* Internal vernier is exposed in conjunction with the deployment of the leg cover.
* Toes extend forward while ankle cover rotates backward for increased stability.
* Thorough pursuit of human movement. Adopts a frame structure optimized for mobility, allowing for more flexible posing.
* In addition to 3-axis movement, the neck is equipped with a swing mechanism to allow for dynamic poses.
* Hand parts for Shining Finger are included. Other expressive hand parts are included to expand the range of poses.

[Accessories]
* Beam sword x 2 types
* Hand parts x 1 set
* Realistic decal x 1

RM110.00
RM110.00 Add to cart
Quick View
img
SAVERM103.60

RG 1/144 Wing Gundam Zero (Colonies Liberation Organization Mobile Suit XXXG-OOWO)

Wing Gundam Zero is three-dimensionalized with a completely new design! The Wing Binder is the key to overwhelming mobility and flight ability, and is equipped with an original gimmick unique to RG!

 The joint part of the Wing Binder is equipped with a 5-axis movable point, realizing flexible posing.
 The vernier inside the Wing Binder has a built-in interlocking gimmick that rotates the unit, extends the internal nozzle, and deploys the fins at the same time.
 By rearranging the parts, it can be transformed into Neo Bird form. Equipped with a transformation gimmick of the leg tip that imagines the play.
 The shoulder armor deploys to expose the vernier. The beam saber can also be stored.
 In addition to the cockpit hatch, the chest intake cover can be opened and closed.
 The machine cannon deploys by opening and closing the cover on the top of the chest intake.
 The hip joint is equipped with two swing axes that can move independently. By sinking the waist, more flexible posing is possible.
 Equipped with a gimmick that deploys the knee armor and shin armor in conjunction with the bending of the knee. Smooth bending of the knees is achieved.
 Twin Buster Rifle can be combined/separated. The barrel extends and retracts as an original RG gimmick, creating a powerful effect when firing.
 The shield features an extendable nose block and an original RG gimmick of interlocking small wings.
 A locking mechanism is installed in the weapon handle, increasing the holding power when holding the Twin Buster Rifle.

[Accessories]
  • Twin Buster Rifle x 1
  •  Beam Saber x 2
  •  Shield x 1
  •  Hand parts x 1 set
  •  Realistic decal x 1

RM148.00
RM148.00 Add to cart
Quick View
img
PO PriceRM120.00

Fat Cat Model 1/100 God Gundam (RG Ver.)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2025
Estimate arrival : NOV 2025

- P-O Price RM120.00
- Deposit RM20.00, Balance RM100.00
- We will inform to make balance RM100.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Fat Cat Model 1/100 God Gundam (RG Ver.)

Brand : Fat Cat

Scale : 1/100
Grade : Real Grade 
Model : God Gundam

This is a FatCat brand RG Ver. but scale 1/100 God Gundam model.
Please note that this is non-Bandai product.

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
SAVERM60.00

P-Bandai RG 1/144 Tallgeese III


Premium Bandai has finally announced the release of the 3rd variant of the Tallgeese! The Tallgeese III will be rolling out with newly molded equipment, and new set of decals.

[ACCESSORIES]
-Mega Cannon
-Heat Rod
-Shield
-Beam Saber

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM112.10

[029] RG 1/144 MSN-04 Sazabi

RG 1/144 MSN-04 Sazabi

  • Experience the RG Sazabi with the largest gimmick of 1/144 scale history.
  • Red comet [Chia . Aznable] dedicated machine appearing in [Mobile Suit Gundam Char's Counter Attack] is made into RG.
  • Various movable gimmicks that can reproduce the posing in the play as well as the mechanism on the airframe setting, and condensed on the 1/144 scale up to the original gimmick by a real machine verification unique to RG!
  • Faithfully reproduce the aircraft, such as arms of arms, funnels etc., based on the sense of setting in the play.
  • Pursue more realism by actual machine verification. A deployment mechanism is installed in the propulsion section of verniers and backpacks.
  • In addition to abundant hand parts, arming that symbolizes Sotheby is attached. Due to various hand parts and high range of motion, both hand holding poses etc. can be reproduced.

[Accessories]
  • Beam shot - Rifle x 1
  • Beam - Tomahawk x 1
  • Beam - saber x 2
  • Shield x 1
  • Funnel x 6
  • Missile x 1

[Product content]
  • Molded article x 17
  • Realistic decal x 1
  • Instruction manual x 1

RM157.50
RM157.50 Request Stock
Quick View
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
RM170.00 Request Stock
Quick View
img
SAVERM40.00

[EXPO] RG 1/144 Gundam OO Raiser Special Clear Color Expo Edition

The genuine EXPO RG 1/144 Gundam 00 Raiser Clear Colour (stand not included).



RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM104.60

[032] RG 1/144 V Gundam / Nu Gundam

Amuro lay boarding aircraft appeared in [Shizua of Mobile Suit Gundam counterattack] lineup in RG!

-Various gimmicks to reproduce the setting mechanism and the poses in the play, and the original gimmicks based on real machine test results are condensed to 1/144 scale.
-With precise parts configuration, it creates both 1 / 1s image and enjoys both fun and decorating.
-Gundam's distinctive coloring is reproduced in molded color. The white body uses three light gray molded colors to increase information density.
-Joints are built into the shoulders and abdomen, and can move flexibly. It enables twisting and shoulder extrusion, resulting in more dynamic posing.
-Armor on the shoulder has a built-in mechanism that expands in tandem with the internal joint. By expanding the range of motion of the shoulder, reduce the interference between parts that occur in posing etc. holding an arm.
-The lumbar joint moves finely for each block, expanding the movable range of the leg. The knee can be pushed forward widely, and a powerful pose with a wide stance can be produced even at 1/144 scale.
-The legs are equipped with [Multilink Gimmick] where the armor slides in conjunction with the movement of each joint. Poses with large knees are also reproduced naturally.

[accessories]
* Beam *  rifle x 1
* Fin *  Funnel x 6
* New hyper bazooka x 1
* Shield (Beam *  Canon) x 1
* Beam saber (backpack part, arm part) x 1 each
* Missile x 1 type

[Item content]
* Molded articles x 13
* Realistic decal x 1
* Instruction manual x 1

RM147.00
RM147.00 Request Stock
Quick View
img
SAVERM70.00

P-Bandai: RG 1/144 Perfect Strike Gundam

The Mobile Suit Gundam SEED HD Remaster's take on Aile Strike Gundam has been added to the Real Grade kit lineup! With the newly molded Striker pack and battery pack system.

The kit also comes with new support pieces to accommodate the weight of its backpack and weapons. A new set of decal is also packed for detailing.

[ACCESSORIES]

-Beam Rifle
-Shield
-Armor Schneider x 2
-Beam Saber x 2
-Battery Pack x 4
-"Schwert Gewehr" 15.78m Anti-ship Sword
-"Panzer Eisen" Rocket Anchor
-"Midas Messer" Beam Boomerang
-"Agni" 320mm Hyper Impulse Beam Cannon

RM250.00
RM250.00 Request Stock
Quick View
img
SAVERM70.00

P-Bandai: RG 1/144 Crossbone Gundam X-2

P-Bandai: RG 1/144 Crossbone Gundam X-2

[ACCESSORIES]

  • Shot Lancer
  • Anti beam cloak
  • Beam Zanber
  • Beam Saber x 2
  • Core Fighter
  • Buster Gun
  • Beam Shield
  • Brand Marker x 2
  • Beam Dagger x 2
  • Scissor Anchor x 2
  • Heat Dagger (soles on feet) x 2
  • Zabine Chareux 1/144 figure

The kit also comes with entirely new molded parts for its v-fin.

RM190.00
RM190.00 Request Stock
Quick View
img
SAVERM17.40

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II


Release Date: January 2020
Estimate Delivery Date: Feb 2020

Premium Bandai announces the release of the 18th entry to the ACE Pilot log model series. This time, Bandai Spirits will be releasing the Uma Lightning exclusive MS-06R-1A Zaku II that comes in its "Blue Thunder" color.
A sheet of newly designed water-slide decal will be included in the kit, markings and seals are specifically designed for Uma Lightning.
Provided with the same mold used in Real Grade Johnny Ridden's High Mobility Type Zaku, bold action and poses can be performed with its wide-ranged articulation.
[ACCESSORIES]
  • Giant Bazooka
  • Zaku Bazooka
  • Zaku Machine Gun
  • Heat Hawk

RM200.00
RM200.00 Request Stock
Quick View
img
SAVERM64.70

[033] RG 1/144 Force Impulse Gundam

-From [MOBILE SUIT GUNDAM SEED DESTINY], MS featuring the main character [Shin Asuka] in the first half of the story.

-Reproduce the MS form mechanism by combining the core splendor, chest flyer, leg flyer and force silhouette.
-Adopt advanced MS joint with insert molding on core splendor and fuselage. The internal frame and body frame can be separated from the runner in the assembled state, achieving precise details and deformable and movable gimmicks.
-Improved color reproduction by splitting parts, accurately expressing even the finer coloration of adjacent armor.
-As a demonstration of the actual machine unique to RG, force silhouettes are regarded as [aircraft], and gimmicks, details and textures are produced. The wing can be folded backwards.
-The forearm has a structure that can be twisted separately from the elbow. The shoulder armor rotates independently, reducing part interference.
-The waist parts can be moved for each block, greatly securing the range of motion.
-Knee armor moves in conjunction with leg movement.
-In addition to the beam rifle, shield, k nife, and beam saber, four hand parts for each of the left and right, such as a hand grip, a hand, and a weapon holding, are included as options.

[accessories]
* High energy beam rifle x 1
* Mobile shield x 1
* Vajra beam saber x 2
* Folding razor vs armored k nife x 2
* Silhouette flyer x 1
* Hand parts (left and right) x 4 types each
* Realistic decal x 1

RM115.00
RM115.00 Request Stock
Real Grade Gundam (RG) is a line of Gundam Kits that was first introduced in 2010 as part of Bandai 30th Anniversary Commemoration Project. RG lines are 1/144 scale kits featuring an advanced articulation of the Perfect Grade (PG) kits, a full inner frame of the Master Grade (MG) kits and affordability of High Grade (HG) kits. The Real Grade line are designed to be realistic in terms of detail and color. It also used the Advanced MS Joint for its body inner frames. The tagline for the RG line is Excitement Embodied.

Showing 1 - 30 of 91 products