Price Clear







Gundam Model Kits

Showing 31 - 60 of 88 products

img
SAVERM59.90

[003] RG 1/144 Aile Strike Gundam

  • RG series third, was born here. Aile Gundam SEED - [Kira Yamato Strike, Go! ]
  • New MS Adovansudo joint appearance in the play [X100 series frame] in the adoption of new mobile gimmick, Further extend mobile performance.
  • Holding the knife twisting arms crossed ... shoulders, seeking to show off moves Kiru.
  • Optimizing squatting position sled ... armored division and the movable shaft structure does not inhibit the movement from the shoulder to the collarbone.
  • Ready to strike ... crotch, thigh portion, the neck, the pursuit of maximum bending of the ankle.
  • Bring out the real attraction [of multi-colored armor.
  • Launch of Kira Yamato, sitting figures included.
  • Accessories: Shield, beam rifle, beam saber × 2, Amashunaida × 2, Basis for a joint action, 1 / 144 Kira Yamato (standing, sitting)

RM90.00
img
SAVERM16.50

P-Bandai Exclusive: RG 1/144 GNY-001 Gundam Astraea Expansion Unit

  • for RG 1/144 Exia use only (that is being sold seperately).
  • This set consists of parts for the Exia to be modified to become RG Astraea.
  • It also comes with armor like GN Launcher, Proto GN Sword, etc.

RM113.40
img
SAVERM40.40

P-Bandai Exclusive: RG 1/144 RX-78/C.A. Casval Gundam

  • RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
  • Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  • Suitable for age 15 and above / no abrasive is needed during assemble process.

RM179.60
img
SAVERM71.88

[018] RG 1/144 Gundam 00 Raiser

  • GW large items following the Exia! Exist beyond the Gundam [Raiser] appeared in the RG!
  • The three-dimensional the Raiser of Real grade unique incorporate a new interpretation, while based on the actual historical research!
  • deep the aircraft characteristics from modern technology
  • Is a characteristic of the aircraft [GN DRIVE] is interpreted as a propulsion engine energy transfer institution. The design of real technology and promotion agencies and high-voltage power transmission line of exploration satellite captured in design.
  • GN DRIVE is fitted with click-type arm of. Can be freely angle adjustment. It is also possible to make the particle storage tank type that appeared in the movie version in the selection formula.
  • Proportion of considering the setting
  • Double O adopted the same Advance de MS joint and Exia is in a high-end models of Exia. While reproduce the successor machine design line in a common joint, and reproduce the distinctive form that is expressed in more Massive.
  • Precision reproduction of Raiser
  • Raiser is equipped with a slide mechanism to wing part, emphasized the linear design-conscious of real stealth fighter. A new interpretation plus actual aircraft in connection part and armed when combined with the body in reference, add a delicate mold.
  • The fully reproduce a variety of armed
  • GN Sword II, GN shield, GN Sword III, GN beam saber is included. Through the joint, can be mounted on the waist or shoulder portion, and the like. And equipped with each armed, sword play action in the play can be reproduced.
  • Each rifle mode, of course GN twin lance form can be replicated. The GN shield concatenates 2 chome, it also possible to braid is equipped on both arms.
  • Accessories: GN Sword II x 2, GN beam saber x 2, GN shield, GN Sword III, riser Sword effect, pilot figure (Setsuna, Suna?)

RM108.00
img
SAVERM120.20

P-Bandai Exclusive: RG 1/144 00 Raiser Trans-Am Mode (Gloss Injection)

  • Release already
  • THis is P-Bandai JPN limited release item!
  • The ultimate machine in Gundam 00 anime series- finaly in ultimate trans-am mode!
  • The exterior parts adopted the gross injection molding, and reproduce the aircraft color shining red in metallic molding color shiny.
  • Comes armed: GN Sword III / GN Sword II / GN beam saber / GN shield.
  • This is prepainted plastic model kits, require simple snap-fit assembly only

RM179.60
img
SAVERM59.90

[019] RG 1/144 Gundam Astray Red Frame

  • Adopted the inner frame system "The Advanced MS Joint". 
  • Inner frames and outer armor move relative to each other, just like real human. 
  • The finely color-coded parts can express the shades without painting. 
  • Luster of metal can be expressed with realistic decals. 
  • Includes various marking stickers. 
  • The Japanese sword "Gerbera Straight", is silver color plated. The pattern on the blade is also reproduced. 
  • Includes a beam rifle, beam sabers and a shield. 
  • Runner x9, Realistic decal x1, Instruction manual x1

RM90.00
img
SAVERM99.81

P-Bandai Exclusive: RG 1/144 Zgok (Mass Production)

P-Bandai Exclusive: RG 1/144 Zgok (Mass Production)

RM188.00
img
SAVERM59.90

[020] RG 1/144 Wing Gundam EW

  • An accurate, realistic take on a classic Mobile Suit, Mobile Suit Gundam Wing: Endless Waltz's angelic Wing Gundam Zero fills the next slot in the prestigious Real Grade line! 
  • With an incredible amount of unique detail drawn from much-researched realistic technology, this Real Grade model is the closest to the real thing so far. 
  • Derived from modern aircraft designs, the Wing Zero's armor and wing surface feature advanced panelling. Internal wing details take into consideration the necessary components for defense and atmosphere re-entry heat, and are recreated in the Wing Zero's signature feather-like armor structure. 
  • Based on cutting edge thrust control technology, this three-dimensional model's wings feature an aerodynamic sweeping design. Taking into account the thrust needed to propel a massive Suit like this in atmo, the massive wingspan is closer to the curved, bladelike wings of a bird than any other in the Wing Gundam line. 
  • Utilizing an all-new Advanced MS Joint, this Suit features maneuverability approaching human levels. The internal structure of this self-contained mobile weapon is built with the correct proportions for the more compact Mobile Suits of the After Colony era for integration with all five Operation Meteor Gundam Suits. 

RM90.00
img
SAVERM59.80

[021] RG 1/144 Gundam 00 Qan[T]

[21] GNT-0000 00 QAN[T] Gundam (RG)
  • Appeared finally to RG is Quanta hugely popular!
  • CONCEPT
    Pursuing a structure that feel [realistic] from the assembly stage. 
    Exia, followed the history that has been developed in light of the Double O, while utilizing the Advance de MS joint of the same type, reproduce the aircraft characteristics of Quanta. By renew the joint structure and mechanical gimmick, to achieve a high mobile performance and the amount of information.
  • RG ever largest action of
    Such as the Sword by renewed movable shaft position and the movable angle of the arm joints protrude horizontally, it improved posing performance.
    Greatly extend the range of motion of the leg by renewed moving method of waist armor. Achieve a more dynamic action poses.
  • Realistic gimmick that created from historical research based on real technology
    Renewed the GN drive attaching and detaching mechanism, fully reproduce the mechanical removable gimmick by adopting a mounting gimmick that also serves as fixing of the back pack.
    By providing the moving point of up to seven, realizing a flexible arm moving.
    GN shield deployment by the arm is to renew the movable shaft, achieve a high range of motion!
  • GN capacitor mounted frame
    While utilizing the Advanced MS joint of RG Exia the same type, the arm is completely new parts reproduction. The reproducibility capacitor disposed systemically.
  • Bit recombinant gimmick GN Sword V
    Characteristic weapon of double oak Anta - bit recombination gimmick also complete reproduction. Grip is equipped with a slide deployment mechanism. GN Sword bit can be attached to the shield.
  • Accessories: GN Sword V, GN sword bit, GN shield, simple stand, weapon possession (left and right), fist (left and right), the movable hand (left and right), palm (left), pilot figure


Item Size : 31 x 19 x 7.5 cm

RM90.00
img
SAVERM89.60

RG 1/144 RX-0 Unicorn Gundam [Bande Dessienee Ver.]

- [Mobile Suit Gundam UC Bandesine] version Unicorn Gundam appears in the RG series!

- Following the full-size unicorn gundam statue gathering attention, [Mobile Suit Gundam UC Bandesine Episode: 0] starts full-scale serial from Monthly Gundam Ace December 2017 issue! In accordance with that topic, [RG Unicorn Gundam (Van de Ciné Ver.)] Is kitized with limited production!

- Armed Armor DE for Unit 1 is included, and additional decals are included.
- Special packaging spec with red background impressive!
- [ADVANCED MS FRAME WORK (an advanced MS framework)] realizes [Unnatural conversation] of Unicorn Gundam with 1/144 scale.

- Accessories: Beam - Magnum x 1, Beam - Saber x 2, Hyper -Bazooka x 1, Shield x 1, Armed Armor DE x 1

RM150.00
img
SAVERM59.80

[031] RG 1/144 Crossbone Gundam X1

RG 1/144 Crossbone Gundam X1 

The Real Grade Crossbone Gundam launches in May! This kit is a part of the GUNDAM EVOLUTION PROJECT which offers "extreme details" that features extended articulation for the RG framing and additional exploration to its part separation!

More images and info will be added later.

[ACCESSORIES]

  • Anti beam cloak
  • Beam Zanber
  • Core Fighter
  • Buster Gun
  • Beam Shield / Brand Marker

RM90.00
img
SAVERM27.70

P-Bandai : RG 1/144 Tallgeese II [Reissue]

Reissue Date : July 2020
Estimate Delivery : August 2020
  • Name: P-Bandai : RG 1/144 Tallgeese II
  • The kit provides a 1/144 scale figure of Treize Khushrenada, and a new set of realistic decal seal for detailing.
  • One of the most anticipated Real Grade Tallgeese's variant is finally getting a GunPla treatment! Comes with newly molded head and face-plate design, along with recolored armor parts for Tallgeese II.
  • Release date ETA December 2018 and delivery date around January 2019
Weapons:
  • Dober Gun
  • Shield
  • Beam saber x 2

RM170.00
img
SAVERM30.00

P-Bandai : RG 1/144 Banshee Norn Final battle Ver.

RG Banshee Norm Final battle Ver.


Release Date : March 2019
Estimate Delivery : April 2019

RM230.00
img
SAVERM40.00

P-Bandai: RG 1/144 Banshee's Armed Armor VN /BS Equipment

P-Bandai: RG 1/144 Banshee's Armed Armor VN /BS Equipment 
Release Date: April 2019
Estimate Delivery: May 2019 

Kit comes with a fully articulated Armed Armor Vibration Nails [VN] and Armed Armor Beam Smart gun [BS] that can be transformed into Destroy and Unicorn mode! This expansion set is compatible with any RG Unicorn Gundam model kit.

RM95.00
img
SAVERM69.00

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom

P-Bandai: RG 1/144 MS-06R-1A Zaku II Eric Mansfield Custom


This kit comes with a new set of decals and slightly remolded head armor piece to accommodate its antenna.

The black part of the head can reproduced by applying a decal seal that comes with the kit.

[ACCESSORIES]

  • * Giant Bazooka
  • * Zaku Bazooka
  • * Zaku Machine Gun
  • * Heat Hawk

RM170.00
img
SAVERM17.40

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II

P-Bandai: RG 1/144 MS-06R-1A Uma Lightning's Zaku II


Release Date: January 2020
Estimate Delivery Date: Feb 2020

Premium Bandai announces the release of the 18th entry to the ACE Pilot log model series. This time, Bandai Spirits will be releasing the Uma Lightning exclusive MS-06R-1A Zaku II that comes in its "Blue Thunder" color.
A sheet of newly designed water-slide decal will be included in the kit, markings and seals are specifically designed for Uma Lightning.
Provided with the same mold used in Real Grade Johnny Ridden's High Mobility Type Zaku, bold action and poses can be performed with its wide-ranged articulation.
[ACCESSORIES]
  • Giant Bazooka
  • Zaku Bazooka
  • Zaku Machine Gun
  • Heat Hawk

RM200.00
img
SAVERM71.70

[033] RG 1/144 Force Impulse Gundam

-From [MOBILE SUIT GUNDAM SEED DESTINY], MS featuring the main character [Shin Asuka] in the first half of the story.

-Reproduce the MS form mechanism by combining the core splendor, chest flyer, leg flyer and force silhouette.
-Adopt advanced MS joint with insert molding on core splendor and fuselage. The internal frame and body frame can be separated from the runner in the assembled state, achieving precise details and deformable and movable gimmicks.
-Improved color reproduction by splitting parts, accurately expressing even the finer coloration of adjacent armor.
-As a demonstration of the actual machine unique to RG, force silhouettes are regarded as [aircraft], and gimmicks, details and textures are produced. The wing can be folded backwards.
-The forearm has a structure that can be twisted separately from the elbow. The shoulder armor rotates independently, reducing part interference.
-The waist parts can be moved for each block, greatly securing the range of motion.
-Knee armor moves in conjunction with leg movement.
-In addition to the beam rifle, shield, k nife, and beam saber, four hand parts for each of the left and right, such as a hand grip, a hand, and a weapon holding, are included as options.

[accessories]
* High energy beam rifle x 1
Mobile shield x 1
* Vajra beam saber x 2
* Folding razor vs armored k nife x 2
* Silhouette flyer x 1
Hand parts (left and right) x 4 types each
Realistic decal x 1

RM108.00
img
SAVERM90.00

RG 1/144 MSN-06S Sinanju [SPECIAL COATING]

Release Date: August 2020
Estimate Delivery: September 2020

Another kit has been added to the Premium Bandai Special Coating series model kits! This time, Full Frontal\'s Sinanju from the Mobile Suit Gundam UC will be treated with high gloss and metallic finishing for luxurious presentation. This limited model comes with all the parts shared with the regular retail released RG Sinanju, including the sticker decal seals.

Just like the original retail kit, this version also has chrome golden parts for its Sleeves and Neo Zeon crests and some of its armor parts.

The kit is also completed with its original accessories from its Beam Rifle that can be converted and combined with the sold separately bazooka. It also comes with two Beam Sabers that can be holstered inside its arm armors when not in use. And of course, it comes with the Sinanju\'s shield that can be combined with its two beam axes which also comes with complete effect parts!

RM590.00
img
SAVERM45.00

P-Bandai: RG 1/144 nu Gundam HWS Expansion Parts

Package Content:

---------------------
CHEST ARMOR UNIT
The chest armor unit is integrated with shoulder missile launcher.
It is also equipped with deployment gimmick on its front armor to reveal the missile launcher inside it.

HYPER MEGA RIFLE
HWS nu Gundam will not be completed without its Hyper Mega Rifle.
It is molded in multiple parts for it to be able to adapt some expansion and contraction gimmick.

LEG THRUSTER UNIT
The leg armors are extended with huge thruster units, to help the balance of its weight distribution, and to give the HWS nu Gundam a boost in space combat.

HIGH MEGA SHIELD
Given its huge appearance, the high-mega shield contains light weight parts to support the balance of its unit.
The barrel boosters can also be extended to a more dynamic presentation.

RM135.00
img
SAVERM50.00

P-BANDAI: RG 1/144 Sword Impulse Gundam

The Sword Silhouette for the Force Impulse Gundam has finally arrived in the Real Grade model kit series! The new silhouette offers variety of new changes to the Force Impulse features, including the newly molded parts for its Flash edge beam boomerang that can also be separated into two.

RM230.00
img
SAVERM131.40

[034] RG 1/144 Zeong

[READY STOCK] 


To commemorate the 40th anniversary of Gunpla, [Zeong] from [Mobile Suit Gundam] has been converted to RG with the latest technology and design!


-In order to reproduce the mechanism on the setting and the pose in the play, the original gimmick based on the actual machine verification is condensed to 1/144.
-Built-in [Advanced MS Joint]. Achieves both smooth and powerful expression and detailed details.
The mono eye can be moved to the left and right according to the movement of the neck. It can also be moved up and down manually.
-Built-in frame with a wide range of movement at the waist. Allows for more dynamic poses.

Four vernier on the chest and back are deployed in conjunction with the front-back movement of the chest.
-Each large and small vernier can be moved greatly individually by expanding the skirt part.
-The hand parts are insert-molded to reproduce precise details and movable joints.
-Reproduce the arm wired mega particle cannon by removing the forearm and attaching the lead wire.

[accessories]
* Display base x 1
* Lead wire (red) x 1* Lead wire (black) x 2* Realistic decal x 1

RM198.00
img
SAVERM10.00

P-Bandai : RG 1/144 RX-78-2 GUNDAM (TEAM BRIGHT CUSTOM)

 ** Action base is sold separately

 
Weapon:
Beam Rifle / Beam Saber / Shield / Hyper Bazooka

RM210.00
img
SAVERM-30.00

RG 1/144 00 Qan[T] Full Saber (Trans-am Clear) The Gundam Base Limited Exclusive Model Kit

RG 1/144 00 Qan[T] Full Saber (Trans-am Clear) The Gundam Base Limited Exclusive Model Kit

RM198.00
img
SAVERM22.00

Gundam Base Limited RG 1/144 OO Qan(T) Full Saber (Clear Color)

Gundam Base Limited RG 1/144 OO Qan(T) Full Saber (Clear Color)

RM198.00
img
SAVERM10.00

Limited RG 1/144 Crossbone GUNDAM X1 (Titanium Finish)

LIMITED RG 1/144 CROSSBONE GUNDAM X1 (TITANIUM FINISH)

RM280.00
img
SAVERM107.60

[036] RG 1/144 Hi-ν Gundam Hi-Nu Gundam

  • Hi-? Gundam that appears in "Mobile Suit Gundam Char's Counterattack Beltorchika Children" has appeared in RG in pursuit of new interpretation of detail expression and reality!
  • Equipped with a multi-link gimmick that slides the armor in conjunction with the movement of each joint. The armor of each part can be slid to expose the mechanical internal frame.

[Accessories]
  • Beam rifle x 1
  • New Hyper Bazooka x 1
  • Shield x 1
  • Beam saber (handle x 3, beam blade x 2)
  • Hand parts (left and right) x 3 types each
  • Weapon holder (Right) x 1 type
  • Realistic decal x 1

RM162.00
img
SAVERM83.70

[037] RG 1/144 God Gundam

Bandai RG 1/144 God Gundam

-From [Mobile Fighter G Gundam], [God Gundam] is now available in RG! Pursuing a structure close to the human body, achieving the largest range of motion in RG history!

-Pursuing movement as if tracing the human body unique to mobile fighters.
-With the advanced MS joints introduced on the shoulders and wrists, you can reproduce the characteristic [arms folded] pose.
-Introduced a mechanism that can move greatly back and forth and left and right on the fuselage. A telescopic gimmick is mounted on the shoulder to secure a range of motion on the side.
-A 3-axis movable structure is used for the neck. Movements such as pulling the chin and sticking out the face are possible.
-The expansion and contraction of the muscles that occur in the human body when bending the knee is expressed by denting a part of the back peach parts. The axis where the knee armor sinks is adopted, and the movement just like the human body is reproduced.
-A new mechanism is used to move the toes, allowing the feet to touch the ground while opening the legs almost horizontally.
-Multi-stage movement from the chest to the waist, and by introducing a slide mechanism to the hip joint, it is possible to kick up the legs while flipping up the waist front armor.
-The movable axis at the base of the fin allows the fin to flutter behind.
-The base of the nail and the thumb cover are equipped with a movable axis to reproduce the god finger.
-Comes with an original arrangement of the sun ring effect.

[accessories]
? God slash x 2
? Hand parts x 1 set
? Joint for connecting the sun wheel effect x 1
? PET sheet (sun wheel effect) x 1 set
? Realistic decal x 1

RM126.00
img
SAVERM30.00

Event Limited RG 1/144 Force Impulse Gundam [Titanium Finish]

Event Limited RG 1/144 Force Impulse Gundam [Titanium Finish]

RM350.00
img
SAVERM0.00

Event Limited RG 1/144 Crossbone Gundam X1 (Clear Version)

Event Limited RG 1/144 Crossbone Gundam X1 (Clear Version)

RM160.00
img
SAVERM10.00

P-Bandai : RG 1/144 MS-06R-1A SHIN MATSUNAGA'S ZAKU II

From [MOBILE SUIT GUNDAM MSV], MS-06R-1A Shin Matsunaga\'s Zaku II is released in the RG series, which pursues realism and precise expression not seen in other 1/144 varieties.


The body of  MS-06R-1A Shin Matsunaga\'s suit is thoroughly reproduced with new molding !
??
?? Right Shoulder
???The right shoulder is equipped with a duct and reproduced with new molding. The realistic finish is 
       created with molding and realistic decals.
?
?? Shield
???The shield is thoroughly reproduced with ribbing along both sides.
??
?? Front armor
???New details are added to the front armor.
?
?? Backpack
???The form of the 06R-1A backpack is faithfully reproduced, with a slightly downsized tank and an 
       added fook in the center.
?
?? Legs
???The exterior shape of the legs differ from 06R-2, and are reproduced with almost entirely new parts.
???A different vernier shape is also reproduced.

RM220.00
Real Grade Gundam (RG) is a line of Gundam Kits that was first introduced in 2010 as part of Bandai 30th Anniversary Commemoration Project. RG lines are 1/144 scale kits featuring an advanced articulation of the Perfect Grade (PG) kits, a full inner frame of the Master Grade (MG) kits and affordability of High Grade (HG) kits. The Real Grade line are designed to be realistic in terms of detail and color. It also used the Advanced MS Joint for its body inner frames. The tagline for the RG line is Excitement Embodied.

Showing 31 - 60 of 88 products