Price Clear







Modelling Tools

Showing 1 - 30 of 338 products

img
SAVERM11.50

[Metal Part] Gatling Gun Muzzle (4 muzzles in 1 pack) for MG

  • Metal Part: Modelling kits metal parts - Gatling gun muzzle (4 muzzles in 1 pack)
  • Installation diameter: 2.0mm
  • For 1/100 MG Size

RM6.50
img
SAVERM59.00

[Metal Part] MG 1/100 Sazabi Ver. KA. Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.Backpack Main thruster - Red x1drill 2.0mm hole, attached to point with minor cement
2.Backpack Sub thruster - Red x2drill 1.5mm hole, attached to point with minor cement
3.Shoulder thruster - Red x6drill 1.5mm hole, attached to point with minor cement
4.shoulder blade (Central) nozzle x2drill 3.0mm hole, attached to point with minor cement
5.shoulder blade lateral nozzle x4drill 1.5mm hole, attached to point with minor cement
6.armor side waist vent x6drill 2.0mm hole, attached to point with minor cement
7.rear armor vents x4drill 2.0mm hole, attached to point with minor cement
8.Arm vents x4drill 2.0mm hole, attached to point with minor cement
9.Front Leg Vents x2drill 2.0mm hole, attached to point with minor cement
10.Leg Side Vents x2drill 2.0mm hole, attached to point with minor cement
11.Leg Rear Vents x6drill 2.0mm hole, attached to point with minor cement
12.Belly vents x1drill 2.0mm hole, attached to point with minor cement
13.Waist Energy Pipe x1direct
14.Metal join cover (round) x6drill 2.0mm hole, attached to point with minor cement
15.Metal aviation hole x15drill 2.0mm hole, attached to point with minor cement
16.Rear Join cover x2drill 2.0mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
Tools needed for assembling metal parts set:
  • Tweezer straight/angled
  • Modelling kits cutter
  • Metal cutter
  • Metal wire 
  • Plastic model kits cement
  • Magnifying glass

RM148.00
RM148.00 Add to cart
img
SAVERM27.50

[Metal Part] MG 1/100 Nu Gundam RX-93 Ver. Ka Metal Enhancement Part Set

All pictures shown are for illustration purpose only. Actual product may vary, kindly check from the list below to find out the actual product quantity.

Index


Parts


Installation
1.Backpack thruster x4drill 2.0mm hole, attached to point with minor cement
2.Upper Calf thruster x2drill 1.5mm hole, attached to point with minor cement
3.Lower Calf thruster x4drill 1.5mm hole, attached to point with minor cement
4.Leg thruster x4Combined with leg thruster to extend thruster effect
5.Vulcan Canon x2drill 1.8mm hole, attached to point with minor cement
6.Shoulder Aviation hole x4drill 2.0mm hole, attached to point with minor cement
7.Arm Aviation hole x4drill 2.0mm hole, attached to point with minor cement
8.knee Aviation hole x4drill 2.0mm hole, attached to point with minor cement
9.Rear skirt Aviation hole x2drill 2.0mm hole, attached to point with minor cement
10.Metal hand joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
11.Metal leg joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
12.Metal Shoulder joint cover (round shape) x4drill 2.0mm hole, attached to point with minor cement
13.Armor screw x30drill 2.0mm hole, attached to point with minor cement
14.Armor Aviation port x10drill 1.6mm hole, attached to point with minor cement
15.Metal beads x50drill 1mm hole, attached to point with minor cement
  • Package comes with free LED & 2 batteries for LED
  • Packages parts packed in different sealed plastic bags to avoid scratch, and easier installation (based on numbers tagged on the plastic bag)
  • Model kits in pictures are only for illustration of finished metal parts installation and excluded in the package.
Tools needed for assembling metal parts:
  • tweezer straight/angled
  • modelling kits cutter
  • metal cutter
  • metal wire 
  • plastic model kits cement
  • magnifying glass

RM91.00
img
SAVERM4.49

[Metal Part] U1 Metallic Black Air Vents / Thruster for Gundam Kit - 8pcs

  • Easy installation
  • Colour : Metallic Black 
  • Inner diameter: 4mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (8 vents)
  • MG F.A. Unicorn Gundam (8 vents)
  • MG Nu Gundam Ver KA (8 vents)

RM13.50
img
SAVERM4.49

[Metal Part] U1 Metallic Silver Air Vents / Thruster for Gundam Kit - 8pcs

  • Easy installation
  • Widest diameter:8.5mm, Length: 6.5mm
  • Suitable for below gundam model kits
  • Mg Unicorn gundam (8 vents)
  • MG F.A. Unicorn Gundam (8 vents)
  • MG Nu Gundam Ver KA (8 vents)

RM13.50
img
SAVERM6.20

[Metal Part] 1.5mm Flat Head Screw * 30 units

  • Package include 30 units of 1.5 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 1.5 mm.
  • Thickness : 1.5 mm

RM7.80
img
SAVERM16.30

MG Strike Gundam Metal Blade Part

  • MG Strike Gundam metal knife part
  • This unit consists of the metal knife only, no other model kit included.
  • More precise photo to come after photographer done capture the metal blade.

RM23.60
img
SAVERM9.90

[BTF] MG 1/100 Gundam Astray Red Frame Sword of King Weapon Equipment Type

  • Sword of King Weapon Equipment Type
  • BTF Brand
  • For MG 1/100 Gundam Astray Red Frame
  • Comes with sword base 
  • Can install LED lights below the sword base.
  • Include 4 units LED lights
  • katana sword for photos purposes and not included in this package.
  • Gundam Models kit comes separately.

RM70.00
img
SAVERM1.90

ABS Rod 240mm Long (mix 18pcs -circle, square)

Material: ABS

Shapes:  Round, Square, Annulus (With Holes), Square (With Holes)

Length: 24cm+

Diameter: 0.5mm+ - 5.0mm+

RM13.10
img
SAVERM6.20

[Metal Part] 2.0mm Flat Head Screw * 30 units

  • Package include 30 units of 2.0 mm flat head screws for modelling kits
  • Diameter of flat heat screw is 2.0 mm.
  • Thickness : 1.5 mm

RM7.80
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 1.5mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 1.5 mm diameter

RM3.00
img
SAVERM9.00

[Metal Part] 50pcs - Armor Detail-up 2mm Metal Silver Bead Ball Parts For MG HG Gundam Model

  • 50pcs per pack
  • Can be use as metal screw
  • To customize Armor kit to looks more detail and metal feel
  • For MG, RG or HG and 1/100 or 1/144 scales Gundam Model
  • Size : 2mm diameter

RM3.00
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C3, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C5, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C5)

  • Specifications : Maximum diameter 9.5mm, Height 9.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C8, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C8)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B2, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B2)

  • Specifications : Maximum diameter 6.0mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B3, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3.0mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B9, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (B10, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.70
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B11, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM20.80
img
SAVERM4.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (N2, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N2)

  • Specifications : Maximum diameter 8.0mm, Height 8.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM11.70
img
SAVERM4.00

[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N3)

  • Specifications : Maximum diameter 10.0mm, Height 10.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM13.00
img
SAVERM6.55

[Metal Part] Head Vulcan Pod for Gundam Kit (1.8 mm, 8 sets)

Head vulcan enhancement metal part  

- Maximum diameter : 1.8 mm 
- Part Long : 2.5 mm 
- Each set got 1 unit vulcan shell and 1 unit vulcan core 
- Total 8 sets per pack  

Suitable for Gundam Head and Chest customization, also can apply to Vulcan weaponry.

RM8.45
img
SAVERM52.00

[Metal Part] MG 1/100 MS-06J Zaku II Ver 2.0 Metal Enhancement Part Set

MG MS-06J Zaku II Ver 2.0 Enhance Metal Parts Set


It contain 10 types of metal parts for MG MS-06J Zaku Ver 2.0 to enhance

1. Red Eye Zaku Metallic Lens x 1
2. Energy Pipe on Head x 1
3. Energy Pipe on Waist x 1
4. Backpack Thruster x 2
5. Arm Side / Shoulder Thorn Metal Spikes x 3 
6. Energy Pipe on Leg x 1
7. Aviation Hole 1.6 mm x 15
8. Aviation Hole 2.0 mm x 15
9. Metal Silver Bead Ball 1.5mm x 50
10. Flat Head Screw 2.0 mm x 30 


RM68.00

Showing 1 - 30 of 338 products