A 1/100 scale model of the Gundam Astray Gold frame, rescued from Heliopolis just before its destruction. Entire frame is finished in gold chrome. Includes parts for replicating the one-armed version as seen in the comic. Includes beam rifle, shield, two beam sabers, and the Duel Bazooka used to escape from Heliopolis.

Manufacturer: Anaheim Electronics Company Operator: Neo Zeon Unit type: mass production general purpose mobile suit Dimensions: head height 20.0 meters Weight: empty 23.0 metric tons; max gross 50.8 metric tons Powerplant: Minovsky type ultracompact fusion reactor, output rated at 2160 kW Armament: beam sword-axe, recharge rack storage location unknown, hand-carried in use; shield, mounted on left forearm, mounts 4 x grenade launcher; beam machine gun, powered by replaceable e-pac, with attached heat bayonet, 2 spare e-pacs stored on hip armor; beam machine gun, powered by replaceable e-pac, 2 spare e-pacs stored on hip armor, with optional attached grenade launcher, 1 round; 4 x sturm faust, rocket-propelled warhead, stored in shield, hand-operated or can be launched from shield Pilot: Rezin Schnyder

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  
• Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  
• This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  
• Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  
• This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  
• Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  
• Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  
• Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• Transformation capability. 
  
• Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  
• Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  Weight: 612g
  

• Total parts count: 703pcs (highest in all MG models) More impressive than all the armor on this mobile suit is the weapons. In addition to the Double Beam Cannon, you get that massive Hyper Mega Cannon. Be forewarned! 
  
• Getting him to pose with that monster on his shoulder is a bit of a challenge, but it can be done. 
  
•  Hours of assembly fun. 
  
• Comes with markings for three different machines (04, 05 and 06). 
  
• Weight: 1402g
  

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.

• Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  
• Its distinguishing design of armor is finely re-created. 
  
• It can hold dynamic poses with its plentiful movable parts. 
  
• Gold and silver metallic color plating makes gorgeous impression. 
  
• Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  
• Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 
  

1/60 scale Perfect Grade Gundam. This kit is just like the original but with special metallic pearl coating. The regular version is our best selling Gundam kit (dollar sales) ever! Fans will want this special collectors version.

* Special Pearl Mirror Version - Perfect Grade - 1/60 Scale
* Wing Gundam Zero Custom from New Mobile Report Gundam Wing: Endless Waltz
* Outer frame coated with pearl metallic paint. The wing parts are made half clear coated with pink pearl, glittering in rainbow colors. Antenna and other parts in yellow are finished in gold paint.
* Red parts ae finished in red pearl metallic. Handle on package for carrying.
* Instructions are in Japanese but booklet has very detailed pictures for examples to building. Japanese language is not necessary to build

Package size: 12.5cm x 59.5cm x 35cm

* First Gundam from the new series - Gunpla Builders Beginning Gundam! * Plastic owned by a mysterious hero Hal. * Accessories: beam rifle, shield, beam saber saber hand books Weight: 301g

• Gundam Exia Normal Scale 1/60
• Comes with installation manual, stickers
• scale is larger then master grade but not so detail
• Snap and fits so glue is not needed.

• Total of 520pcs parts to create a robot . Can switch and transofrm between the massive G-Fortress flyer, the core base, core top and core fighter individual units, plus of course the actual ZZ Gundam itself. 
  
• Inner detail is not as good as some other MG releases, but given the nature of the ZZ, that's not surprising. 
  
• Fully posable hands are just part of the completely posable structure that lets you duplicate virtually any scene you can think of. 
  
• Weapon includeds two beam sabers, and a huge double cannon.
  

Amazing sturdiness! The only parts that will normally fall off when playing is merely either the hands or the side skirts! The MGs from the G Gundam are VERY playable. Long term durability. Sagging parts? Of course not. Shining Gundam, can last a lot of wear and tear thanks to the use of screws. Locking mechanism for some of the joints. Shining Finger!

-MMI-710 "Excalibur" anti-ship sword 

• From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
• Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  
• Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  
• [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  
• [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  
• It can be equipped with a backpack. )
  
• Accessories: Tanegashima Gun x1, Nichirinmaru Katana x1, Denkoumaru Naginata x1, Sankoumaru Jumonji Yari x1
  

• Accessories: MS for the machine gun, MS for a machine gun spare magazine, MS for anti-ship rifle ASR-78, the heat Hawk, heat Hawk (storage state), MS for bazooka type A2, MS for bazooka spare magazine × 2, bazooka joint, open hand (left), gun possession (right), weapons possession (left and right)
  

• Total 307 parts, plus polycaps for joints, foil stickers for coloured parts, clear stickers for warnings, and the usual dry transfers for insignia and other markings, are included in the box. 
  
• Lots of weapons come along with it, double-bladed beam sabre, beam rifle, and shield, etc. Included in that parts count is a display stand, to allow you to pose your Freedom Gundam in flight. 
  
• A beautiful kit of a beautiful machine! 
  
• The markings allow you to designate your Freedom Gundam as a Zaft machine, or as Kira's personal machine.
  

• Bandai's High Grade Universal Century kit line continues to get better and better and nowhere is this in evidence more than on the latest kit, the 00 Gundam Seven Sword/G. 
  
• Molded in color with clear parts and marking stickers. As always, plenty of poly-caps are used to ensure a great amount of articulation. 
  
• Weapons include GN Sword II Blaster, GN Buster Sword II (assembles in shield and sword mode), GN Katar, GN Sword II Long (assembles in rifle and sword mode), GN Sword II Short, and GN Beam Saber. Weight: 330g
  

Weapons include GN beam rifle, GN beam sabers, shield, prototype GN sword, and GN launcher. Includes new features such as shoulder joints that can extend outward, allowing dramatic poses as seen in the animated series. Waist features axial cover parts for recreating off-center poses. Weight:524g

Accessories includes beam rifle and comes with a pistol shape and 2 sets bits. At least ten GN Rifle Bit IIs are stored within the GN Holster Bits, mounted on Zabanya's rear thruster block. Weapons-wise, GN Micro-Missiles are laced throughout its armor and the GN Holster Bits contain GN Rifle Bits within them. Expected to arrive on middle September, 2010

- [Mobile Suit Gundam SEED DESTINY] commercialized in 1/100 scale [Akatsuki] who was active in the series.
- Elbow joint adopts the double joint mechanism, expand the movable range.
- Adopted a refraction mechanism in a backpack, pursuing the folded state, the sportiness of the expanded state.
- Steller's sea eagle, Shiranui, comes with two types of backpack.
- Beam saber, beam rifle, shield, grip hand x 2 (both hands) is included.
- Hoishiru, marking seal (Akatsuki, Shiranui, eagle, aircraft number) is included.

• Prior to release of the second story, three-dimensional deformation of the fastest MS · Delta Plus! 
  
• Replacement variant forms of reproduction wave rider. 
  
• Machines do not feel that variable proportions of outstanding! 
  
• Part adopt clear head! 
  
• MS outstanding performance is in the form of posing! 
  
• Minimizes replacement parts, can transform smoothly. 
  
• Can be mounted in the form of armed wave rider. 
  
• Accessories: beam saber × 2, beam rifle, shield, replacement parts for the deformation
  

• This full burst mode special version box comes packed with the same MG kit as the normal version of MG Strike Freedom Gundam. 
  
• And this special box include gold coating parts, Dragoon effect parts, a special clear blue base stand, and a clear illustration poster of Strike Freedom vs Destiny. 
  
• Clear stands for each Dragoon are included, which can be attached to the special base stand and display them being sent flying out to its target(s). 
  
• Stickers and custom decal markings are included to detail-up the completed Strike Freedom Gundam kit.Comes with the gold inner frame, unique stand base that able to shoot the beam canon of dragoon system, some hate the stand base, some love it, and notice the 'wing' inner also in gold color, which is pretty cool too. 
  
• One of the similarity feature of strike freedom gundam full burst mode is the combineable rifle on the waist with unique fingers to posture for gun carrying look, this mecha really stand tall and cool among the scale and worth to collect. 
  

Awesome height of 60cm. The only thing that makes this kit different from other 1/60 scale kit is the lighting throughout! Dozens of translucent yellow and blue parts are included, as well as lighting contacts, light bulbs, and a diode. Lighting starts at the included display base, and the wiring is integral to the building of the kit itself. Of course, you need to get batteries yourself. A teeny scale model of Kira Yamato is included. Weopans includes the Dragoon, rail guns, beam sabres, beam rifles, and a beam shield. Weight: 1820g

• Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  
• The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
• Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  
• Weight:696g.

• Gundam 00 Raiser condenser mode made its appearance! 
• Active character in the early 00 movies. 
• Accessories: 
• GN Sword II × 2, 
• GN Sword III, 
• shield, 
• pedestal