Price Clear







Gundam Model Kits

Showing 1 - 30 of 53 products

img
SAVERM574.90

PG 1/60 Gundam 00 Raiser

- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

RM925.00
RM925.00 Add to cart
img
SAVERM220.90

PG 1/60 GAT-X105 Strike Gundam

The impressive (and beautifully-designed) Strike Gundam, from Gundam Seed, is the next machine to have received the Perfect Grade treatment! It features superior flexibility -- Bandai's designed an all-new, unique inner frame system for this model, to match the proportions of the mecha designs in the series. 

The waist joints even allow it to bend side to side, and twist realistically! The "camera eyes" light up with internal wiring and a single LED. 

Not surprisingly, a lot of parts are required to create the exquisite detail we've come to associate with the Perfect Grade series -- over 550 ABS plastic parts, all molded in colour, plus polycaps for the joints, die-cast joint parts for stability, and of course the LED and wiring for the head (requires one CR1220 watch-type battery, sold separately). 

Parts are included for a Beam Rifle, shield, Armor-Schneider blades, and of course the positively enormous Grand Slam sword -- this last beautifully plated in silver! 

A challenging project for fans of Gundam, of Gundam SEED in particular, or just Perfect Grade kits!

Technical and Historical Notes/Story line: 

With the outbreak of war, the Earth Alliance's Atlantic Federation begins a secret project to develop mobile suits to counter ZAFT's mass-produced ZGMF-1017 GINN as well as operate free of interference from the N-Jammers. 

The GAT-X105 Strike Gundam is one of five initial prototype suits secretly developed in conjunction with Orb's Morgenroete defense company. Whereas the other Gundams are designed for specific roles, the Strike Gundam is intended to operate in various configurations through the use of Striker packs. Like the other prototype Gundams, the Strike Gundam is equipped with the new Phase Shift (PS) armor technology. 

When in Phase Shift mode, the Strike Gundam is nearly impervious to attacks from shell-firing artillery or melee weapons. However, use of Phase Shift for extended periods of time is a massive drain on the energy battery. 

The basic version of the Strike Gundam is nearly identical to the GAT-X102 Duel Gundam's initial configuration. Its armament consists of two "Igelstellung" vulcan guns, a 57mm beam rifle, a shield and two "Armor Schneider" combat k-nives. Other optional armaments include a bazooka designed for underwater combat. 

In addition to the first unit, Orb later constructs an improved version from spare parts, the MBF-02 Strike Rouge. The Alliance also constructs a third unit, which is later upgraded into the GAT-X105E Strike E. 

The Strike Gundam is later followed by the mass production GAT-01 Strike Dagger and GAT-01A1 Dagger. The first Strike Gundam enters combat in January 25, C.E. 71, when ZAFT attacks Orb's space colony Heliopolis in an attempt to steal the Gundam prototypes. 

Although ZAFT succeeds in capturing four units, the Strike Gundam remains in Alliance control and is initially (and ineffectively) used by Murrue Ramius. However, young Coordinator Kira Yamato is able to modify the incomplete operating system and make the Strike Gundam combat ready. 

Following the destruction of Heliopolis, Kira becomes the Strike Gundam's default pilot and joins the crew of the Archangel. While heading for the Alliance's Alaskan headquarters, the Strike Gundam is severely damaged in battle on April 17 by Athrun Zala's self-destructing GAT-X303 Aegis Gundam. 

The Strike Gundam is later repaired by Orb and passed on to ace pilot Mu La Flaga, while Kira upgrades to ZAFT's ZGMF-X10A Freedom Gundam. The Strike Gundam serves as Mu's personal mobile suit after the Archangel defects from the Alliance and joins the Orb forces and Clyne faction to form the Three Ships Alliance. 

At the war's end on September 27, the Strike Gundam is damaged in a duel with Rau Le Creuset's ZGMF-X13A Providence Gundam and later destroyed while Mu is protecting the Archangel from an attack by the Alliance battleship Dominion. 

Two years after the war, the versatile design of the Strike Gundam serves as the basis for ZAFT's ZGMF-X56S Impulse Gundam.

RM550.00
RM550.00 Add to cart
img
SAVERM309.40

PG 1/60 XXXG-00W0 WING GUNDAM ZERO CUSTOM

  • From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  • With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  • Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  • Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  • Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  • Center chest and “eye” cameras light up using included LEDs (batteries required)
  • Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 

  • Accessories: Accessories: Twin Buster Rifle, Beam Saber x2

RM590.00
RM590.00 Add to cart
img
SAVERM314.90

PG 1/60 RX-178 Gundam MK-II (A.E.U.G)

  • An extremely detailed and highly engineered model kit of the Gundam Mk 2 from "Mobile Sut Zeta Gundam!" 
  • Furnished with an internal skeleton featuring pistons, sensor arrays, as well as LED powered e07/1/2014 (CR1220 battery sold separately), the Mk 2 embodies the mechanical complexity and attention to detail embodied in the Perfect Grade line. 
  • Standards for the Perfect Grade line include fingers that have individual articulation, while actuators move in sync with arm and leg joints. 
  • Mk 2 features many opening hatches and swiveling components as if it were a real machine undergoing maintenance. 
  • Beam rifle, beam saber, bazooka, head Vulcan, shield are included. Runner x 30, Foil sticker x1, Marking seal x1, Decal x1, Led unit, Instruction manual.

RM585.00
RM585.00 Add to cart
img
SAVERM380.90

PG 1/60 Gundam Astray Red Frame

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

RM699.00
RM699.00 Add to cart
img
SAVERM404.90

PG 1/60 Strike Rouge + Sky Grasper

Superbly molded in coloured plastic, with the same fantastic construction quality demonstrated in previous PG kits. A whopping number of parts are included in the typically-large (and heavy!) box. Besides the Strike Rouge, there are parts included for the Skygrasper and Aile Striker! Metal-plated parts (in pink!) are included for the Strike Rouge's custom weapons. Screws, springs, fabulous Gundam Stickers and dry-transfer decals are included; two construction manuals (one for the Strike Rouge, one for the Skygrasper and Aile Striker) are included to walk you through the building of all three models. An "instruction manual" is also included for those who like to paint their Gundam models (of course it doesn't need to be painted), and also for indicating precise locations of the markings.

RM735.00
RM735.00 Add to cart
img
SAVERM639.90

PG 1/60 ZGMF-X20A Strike Freedom Gundam

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size among the PG. With it -  s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively shows the gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam

Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60

RM950.00
RM950.00 Add to cart
img
SAVERM449.90

PG 1/60 Gundam GP01/Fb

Bandai's newest PG offering is truly deserving of the name "Perfect Grade," and it's also a two-in-one; you can build it as either the GP01 or the GP01Fb! Like previous Perfect Grade kits, this behemoth offers a level of detail and motion that's far beyond what you see in even the biggest Master Grade offerings. Panels and hatches all over the surface open, to reveal inner mechanical details. What's more, after you get done wading through over two dozen runners of literally thousands of parts, you'll have armament for the GP01 including two 60mm Vulcans, two beam sabers, and a beam rifle, as well as the Core Fighter II. For the GP01Fb, there are two extra beam guns, and you can build the Core Fighter II Fb. But that's not all -- the kit also includes the parts to build a hangar/dock (see photos below), with little figures of maintenance workers to position around it! A bonus card with a serial number on it also included. Act now, and add this beauty to your Perfect Grade collection (and don't forget to budget for the shipping costs, this item weighs 5kg/11 lbs.)!

RM750.00
RM750.00 Add to cart
img
SAVERM547.50

PG Unleashed 1/60 RX-78-2 Gundam

Product Detail

Bandai Spirits has revealed the design of the new Perfect Grade Unleased RX-78-2 Gundam during their VR presentation in October. The teaser video reveals the concept of the upcoming kit, showing some never-before-seen features in any GunPla to date.

The kit showcases some open hatch gimmicks, also including some LED features. The modernized design of the RX-78-2 Gundam celebrates the evolution of GunPla through 40 years of its existence.

More images and details will be added once Bandai Hobby starts the full prototype reveal.

RM950.00
RM950.00 Add to cart
img
SAVERM419.20

PG 1/60 RX-0 Unicorn Gundam (Without LED)

  • The transformation from Unicorn Mode to Destroy Mode including the opening of the face guard can be perfectly recreated. 
  • The entire red Psycho Frame is made with a unique light-focusing resin. 
  • A magnet is inserted in the Blade Antenna, which can be opened and closed during the transformation, in order to keep the antenna beautifully in Unicorn Mode. The interior of the antenna, which is exposed in Destroy Mode, is gold. 
  • The range of movement of the elbows and knees is broadened to the utmost limit, without damaging its appearance. 
  • Includes a lot of weapons such as a Beam Magnum, a Hyper Bazooka and Beam Gatling Guns. 
  • The Beam Gatling Guns can be combined with the Shield and worn on its leg. 
  • A display stand is included to allow a wide range of weaponry to be displayed together with the Mobile Suit. Set the MS on the pillar of the stand and enjoy its dynamic poses which are special and unique to 1/60 scale. 
  • Figures of Banagher Links, standing and sitting, are included. 
  • Original marking stickers for the kit are included. 
  • Psycho Frame emits UV lights by incorporating the LED Unit for PG 1/60 RX-0 Unicorn Gundam, sold separately. 
  • Runner 47, Slide mark x1, Foil sticker x1, Instruction manual x1 

RM780.00
RM780.00 Add to cart
img
SAVERM855.20

PG 1/60 RX-0 Unicorn Gundam (With LED)

  • Latest news : Shipment has arrived.
  • This is completed set of PG Unicorn Gundam + LED Set at super saver price!
  • PG Unicorn Set:
  • Fully transformable (Face guard "expansion" included)
  • "Third form" realized
  • Red psychoframe in special glow plastic
  • "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  • Articulation of the elbow and knee joints able to perform a wide range of movements
  • Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  • Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun x— 2, saber x— 4 (beam parts x— 2), hyper-Basuka, dedicated display base, 
  • LED Unit:
  • A set of LED units to be UV emitting [PG 1/60 RX-0 Unicorn Gundam]
  • For use with Psychoframe with 29 LED units, and one for the eyes, making the total 30 LED units
  • Height Approx: 361mm
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM1180.00
RM1180.00 Add to cart
img
SAVERM479.12

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn

  • The head has transformation structure. The antennas on the head have magnet inside to hold them together in Unicorn Mode. 
  • In the state of "unchained", armor all over the body opens and maximally reveals the Psycho Frames. Psycho Frames are made with clear material. 
  • The lion's mane like Armed Armor XC is recreated with gold-color molding. The Psycho Frames are also made with clear material. 
  • The same range of movement as Unicorn Mode is maintained even in Destroy Mode. The kneeling pose can be recreated. 
  • The Revolving Launcher can be attached to the lower barrel of the Beam Magnum. The Beam Jutte, is recreated with clear parts. 
  • The Armed Armor DE and Beam Sabers are included. The Armed Armor DE has unfolding gimmicks and can be mounted on the back. 
  • The spare magazines of the Beam Magnum and Revolving Launcher can be attached to the hip. 
  • Weapons can also be displayed with included display base. The base has an elastic support post to enable the MS to make dynamic poses. 
  • Riddhe Marcenas figures (standing and seated) are included. 
  • Includes original marking stickers. 
  • Runner x58, Tetron sticker x1, Foil sticker x1, Instruction manual x1

RM840.00
RM840.00 Add to cart
img
SAVERM758.64

PG 1/60 RX-0 [N] Unicorn Gundam 02 Banshee Norn (With LED)

LED is included in this unit.

- [Kuroki lion] final battle form of Banshi~i - Banshi~i-Norns appeared !! to PG


- [Mobile Suit Gundam UC] than Banshi~i-Norns appeared become a Gundam highest grade PG. Fully reproduce the transformation from Unicorn mode to Destroy mode. Various equipment comes as the final decisive battle form.

- Armed Armor DE as a new accessory armed, comes with parts to reproduce the revolving launcher (. Existing beam Magnum, new parts added to shield both form reproducible).
- Psycho frame that is exposed to Destroy mode UV emission resin made of clear plastic reproduced in (clear yellow) specification.
- Anime by removing the Armed armor XC version Banshi~i also reproducible.

- Accessories: Beam Magnum (revolving launcher), shield (Armed armor DE), Armed armor XC, beam Jytte effect, beam saber × 2, beam Magnum spare magazine, pilot figures (Standing-sitting)

RM1280.00
RM1280.00 Add to cart
img
SAVERM0.00

[Daban] PG 1/60 RX-0 Unicorn Gundam (Final Battle Ver.)

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60
Model: Final Battle Version 

Included components

* Special : Metallic Green Psycho Frame & Clear Green Psycho Frame (1each)

* Main Body x1

* Shield x3 (Final Battle)

* Beam Magnum x1

* Beam Magnum backup cartridge x1

* Beam gatling gun x2

* Beam saber x4

* Beam bazooka x1

* Display base

* Detron stickers for all markings


Please note  that this is Not-Bandai product

RM450.00
RM450.00 Add to cart
img
SAVERM150.00

[Daban] PG 1/60 Gundam Unicorn Fighter

[Daban] 1/60 Gundam Unicorn (PG)


Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM350.00
RM350.00 Add to cart
img
SAVERM497.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM880.00
RM880.00 Add to cart
img
SAVERM40.00

Gao Gao PG 1/60 OO Raiser Gundam

Gao Gao PG 1/60 OO Raiser Gundam

RM380.00
RM380.00 Add to cart
img
SAVERM547.50

PG 1/60 Perfect Strike Gundam

If you already have the PG Strike Gundam, you can purchase the Premium Bandai Perfect Striker pack expansion pack separately!

The full kit will also include updated armor parts for the original PG Strike Gundam.

[ACCESSORIES]
Yellow LED
Strike Gundam new armor parts
Aile Strike pack (Perfect Strike Ver.)
Sword Striker pack
Launcher Striker pack
New pointers
New molded parts are added to the kit, that includes the newly designed armor parts for its body and head.
Gunmetal inner framing colors! Chrome parts are also provided for the plated parts.
Extra finish parts are also introduced in various pieces of the new armor, resulting in a more sophisticated design.

RM950.00
RM950.00 Add to cart
img
SAVERM100.00

Daban PG 1/60 Astray Blue Frame Gundam

Daban PG 1/60 Astray Blue Frame Gundam


Package Content : 

  • Body Unit
  • Armor Schneider Combat Knife x 2
  • Positron Blaster Cannon x 1
  • Type 71 Beam Rifle x 1
  • Shield x 1
  • 8-tube Missile Launcher x 2
  • M68 "Pardus" 3-Barrel Short-range Guided Missile Launcher x 2
  • M68 "Cattus" 500mm Recoilless Rifle x 2
  • Stand Base x 1
  • Second L Armor Converter
  • Led Unit


Please note that this is not Bandai product.

RM400.00
RM400.00 Add to cart
img
SAVERM40.00

[Daban] PG 1/60 Unicorn Gundam Perfectibility Divine Unicorn Perfect + Full Armor Weapon Pack

[Daban] PG 1/60 Unicorn Gundam Perfectibility Divine Unicorn Perfect Full Armor Weapon Pack

Series: Gundam Unicorn
Grade: Perfect Grade (PG)
Manufacturer: Daban
Scale: 1/60

Please note that this is NOT BANDAI product

RM680.00
RM680.00 Add to cart
img
SAVERM497.70

PG 1/60 Gundam Astray Red Frame Kai

P-Bandai: PG 1/60 Gundam Astray Red Frame Kai

Great news guys!!! The item that sold under P-Bandai in Non-Asia Countries is now released as the regular Bandai product in Asia Countries!!! Make sure you don't miss out this great opportunity to get this big guy home!!!


Accessories:
  • Gerbera Straight x 1
  • Tiger Pierce x 1
  • Tactical Arms II L


RM880.00
img
SAVERM10.00

[Daban] PG 1/60 Unicorn Fighter 03 Phenex Gundam

[Daban] PG 1/60 Phenex Gundam Unicorn

Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM450.00
img
SAVERM368.20

PG Gundam Exia (Without LED)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.


- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. It embodies the design arrangement and the internal frame structure led from it.

- Feel energy transmission 'Armor · Frame structure'
Considering the transmission structure of [GN particle], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, aerial action full of dynamism is possible.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.
- The regular version adopts a metallic seal and expresses the light emitting part by reflection of light.

- Accessories: GN sword x 1, GN shield x 1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x 1

RM710.00
img
SAVERM736.80

PG Gundam Exia (LED Lighting Model)

- PERFECT GRADE [Evolution (20th year) Evolution]
The ultimate form to be reached with the latest technology, [PG 1/60 Gundam Exia], appears here.

- Focusing on the solar furnace [GN Drive] which is the biggest feature under supervision of Mechanical Designer Ebi Okawa Kanitake. A thorough explanation of the mechanism by which [GN particle] transmits from the driving force [GN Drive] to the whole body. Newly designed LED units, newly adopted light guiding materials, gimmick etc. are newly developed, as well as lighting effects when [GN particles] are accumulated and compressed, as well as embodying the design arrangement and the internal frame structure derived therefrom Approach to reproduce.

- The first item in the PG series [GUNPLA EVOLUTION PROJECT] 3rd item
EVOLUTION POINT is [LIGHT EMITTING (lighting effect)]
The color tone change due to the behavior of [GN particle] is expressed by three new elements [LUMINOUS ELEMENTS (Luminous Elements)].

- Feel energy transmission 'Armor -  · Frame structure'
Considering the particle transmission structure from [GN Drive], the internal frame where the cable is exposed from various parts of the aircraft. Expansion of external armor More emphasize its presence by gimmick.

- Completely new 'LED unit' that changes its color with time
The newly designed LED unit expresses color change due to accumulation and compression of [GN particles]. It changes from [Green] in the active state to [Green -  · Blue] in the operation state, and changes to [Critical state] [Red].

- 'Guiding material' first adopted in Gundam Modeling History
In addition to clearing the conventional movement restrictions, soft silicon material which enables light production by LED, and newly adopted resin with high light guiding property etc. to diffuse the light as a whole.

[Detailed detail and gimmick guided by thorough consideration]
- Improve the mechanical impression by frames and mechanical details removed from the gap.
- A hatch open gimmick that allows the whole body exterior to move, so that it can also enjoy internal details.
- Laminated structure and reproduced texture by special seal [GN Drive]
- With a wide range of motion and the attached dedicated pedestal, it is possible to perform aerial action full of lively dynamics as well as lighting effects.
- Accessories are enriched, such as abundant wrist parts and abundant armed weapon with gimmick.

- Accessories: GN sword x1, GN shield x1, GN long braid x 1, GN short blade, GN beam saber x 2, GN beam dagger x 2, dedicated display base x1

RM1180.00
RM1180.00 Request Stock
img
SAVERM980.00

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [Without LED] [REISSUE]

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [REISSUE]


*LED is sold separately
*Gold Plated

RM2220.00
RM2220.00 Request Stock
img
SAVERM428.20

P-Bandai PG 1/60 Gundam Astray Blue Frame

P-Bandai PG 1/60 Gundam Astray Blue Frame (2nd Issue)


From MOBILE SUIT GUNDAM SEED ASTRAY,

"The Best Mercenary" GUNDAM ASTRAY BLUE FRAME is joining the Perfect Grade!

Perfect Grade perfecting the true meaning of BLUE FRAME------------------

Excellent shape & color replication. Brand new weapons, figures, and markings included.

-------------------------------------------------------------------

* 'M68 "Cattus" 500mm Recoilless Gun' included

The huge weapon 'M68 Cattus 500mm Recoilless Rifle is included with brand new design.

Trigger adjustment, extendable barrel, and detachable missile rack, various gimmicks set to increase the play value.

Size(total length)・・・in stored state: about 265mm/in deployed state: about 280mm

* Original Marking included.
Brand new marks such as caution marks are included, along with Gai Murakumo's personal mark.

* Figure included
2 types of new Gai Murakumo figures in the same scale are included (standing ver./sitting in cockpit ver.)

* Perfect Grade's extremely wide movability.

PG GUNDAM ASTRAYs possess the 'Movable Inner Skeleton" to achieve the flexible and dynamic movability.
By linking the armor to the frames and multiple joints, it's possible to create poses similar to human bodies.

The knee parts and knee joints are die casted to improve durability when posed.

* Camera Eye Light
The Camera Eyes (eyes) on the head are built with light unit inside, and can be lit with batteries (sold separately)

*Required Battery: CR1220 (sold separately) x1 
Weapons: M68 "Cattus" 500mm Recoilless Gun, Beam Rifle, Beam Saber, Shield

RM950.00
img
SAVERM150.00

[NillSon] 1/60 Astray Red Frame Gundam Flight Unit - with Backpack (Deactivate Mode) [Gray]

* This is a NON Bandai product.

Package include :
* 4 blade swords 
* Special PG Action base
* Deactivate Frame Colour

Around 30cm height 
Package size : 50cm x 40cm x 30cm (19.69in x 15.75in x 11.81in)

RM450.00
img
SAVERM300.00

[MECHANICORE] 1/72 MAS-20 PYRANNOSAURUS



    *** PRODUCT SPECIFICATION***

  • 1. Head Height : 260MM
  • 2. Height : 285MM
  • 3. Depth : 151MM
  • 4. Mega Cannon Length : 324MM
  • 5. Mega Shield : 240 x 130MM
  • 6. Plastic parts : Approx~ 1650 pcs
  • 7. Maintenance valve : 55
  • 9. Valve metal hinges : 19
  • 10. LED = 28
  • 11. Power Control Unit
  • 12. Specified Platform and Stand Bundled
  • 13. Premium Exclusive : Heavy Laser Rifle bundled

RM1480.00
RM1480.00 Request Stock
img
SAVERM39.30

P-Bandai : Clear Color Body for Unleashed PG RX-78-2 GUNDAM

  • Clear Armor for Unleashed PG RX-78-2 GUNDAM
  • Model Kit is sold separately, only clear armor included.

RM380.00
img
SAVERM30.00

[NillSon Works] PG 1/60 Astray Red Frame Gundam - with Backpack Flight unit, 4 katana and Circle base stand

????Ready Stock Unit 

????Nilson Work Manufacture Model Kits
????1/60 Model kits 
????Model kits + Flight Unit + 4 katana + PG Stand

RM450.00

Showing 1 - 30 of 53 products