• Home
  • Modelling Tools

PRODUCTS

Price Clear







Brand

Availability

Modelling Tools

Showing 871 - 900 of 1466 products

Quick View
img
SAVERM5.10

[CorMake] Panel Line Accent Color - Gold (40ml)

Alternative to Tamiya Panel Line enamel paints.

Ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Note:
Plastic parts may become brittle when using Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

Specs:
Type: Panel Line Accent Color 
Colour: Gold
Quantity: 40ml

RM16.90
RM16.90 Add to cart
Quick View
img
SAVERM1.50

Cormake Masking Tape for Curves 10mm

Masking Tape for Curves 10mm


  • This is a 10mm width variation of Cormake masking tape for curves, which allows marking of curved lines smoothly and without wrinkles. 
  • Perfect for use on more gradual curved lines. Adheres and removes crisply, without residue and leaving a sharp paint finish.
  • Length: 900m

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM3.00

DSPIAE AT-PL Aluminum Penal Line Pen Non-overflow Wipe with 1 Pen Nib for Model Tool

DSPIAE AT-PL Aluminum Penal Line Pen Non-overflow Wipe with 1 Pen Nib for Model Tool


Brand : DSPIAE
Code : AT-PL
Content : 
- Aluminum Penal Line Pen
- 1 Pen Nib

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM2.80

Mr. Hobby-Mr. Color-GX218 GX Graphite Black (18ml)

MR COLOR is a paint that has long been regarded highly by modelers all over the world as a model paint that delivers an excellent finish. There are a large number of colors and color types and they are suitable for painting most models. As for the number of times of coating, 1 ~ 2 coats are recommended when brush painting, and when using an air brush, 2 ~ 3 coats after diluting to a ratio of 1 (MR COLOR) : 1 ~2 (Mr. thinner). Mix in 5 ~ 10% of Flat Base to make glossy colors semi-glossy, or 10 ~ 20% for a matte finish.

Recommend Thinner: Mr Hobby Mr Colour Thinner / MODO D-01H/D 


Specs:
Type: Lacquer Base 
Colour Code: GX218
Colour: Glaphite Black
Quantity: 18ml

RM17.20
RM17.20 Add to cart
Quick View
img
SAVERM1.90

DSPIAE Panel Liner Pen Nib PLN-01 x 3 units (replacement nib set)

DSPIAE Panel Liner Pen Nib PLN-01 x 3 units

RM5.00
RM5.00 Add to cart
Quick View
img
SAVERM3.00

Mr Hobby Mr Aqueous Color Thinner Water Based Solvent Base Hobby Color Gundam Model Kits (110ml)

Mr. Hobby Aqueous Thinner is perfect for thinning Mr. Hobby Aqueous or Tamiya paints. 

Thin to around a 1:1 mix for best results.Please note this thinner will only work with water-based paints such as Mr. Hobby Aqueous or Tamiya. It will not work with lacquer-based paints such as Mr. Colour or MR. Paint or Splash.

This thinner contains alcohol for faster drying, though the Aqueous Hobby Color may be diluted with tap water.
It is to use with Mr. Aqueous Hobby Color.
It also improves adhesion to the paint surface.
It can be used to wash airbrushes and brushes too.

RM15.00
RM15.00 Add to cart
Quick View
img
SAVERM5.00

Mr Hobby Mr Aqueous Color Thinner Water Based Solvent Base Hobby Color Gundam Model Kits (400ml)

Mr. Hobby Aqueous Thinner is perfect for thinning Mr. Hobby Aqueous or Tamiya paints. 

Thin to around a 1:1 mix for best results.Please note this thinner will only work with water-based paints such as Mr. Hobby Aqueous or Tamiya. It will not work with lacquer-based paints such as Mr. Colour or MR. Paint or Splash.

This thinner contains alcohol for faster drying, though the Aqueous Hobby Color may be diluted with tap water.
It is to use with Mr. Aqueous Hobby Color.
It also improves adhesion to the paint surface.
It can be used to wash airbrushes and brushes too.

RM31.00
RM31.00 Add to cart
Quick View
img
SAVERM5.00

Mr. Hobby Mr. Brush Cleaner Liquid 110ml

**Note: Liquid items consider as dangerous goods and its PROHIBITED to ship from west Malaysia to east Malaysia. Order will force to cancel.


Please take note that:

We just responsible for the sale, not responsible for delivery issue as courier company is 3rd party beyond control of our company. We use Shopee supported logistic. Any damage/broken/delay of the parcel please make a report to Shopee.

\r\n

Refuse perfectionist. Some box form item may have defect on box originally when we received the stock. No 100% guarantee perfect condition. We will try our best to pack in good form to prevent unhappy case.

RM33.00
RM33.00 Add to cart
Quick View
img

SunShine 600/3000 Grit Sanding Polish Stick

SunShine 600/3000 Grit Sanding Polish Stick

- Double sided polish foam with different polish purposes
- 600/3000 Grit
- Awesome finish result
- Soft and light weight
- Perfect for polishing
- Dimension: 17.8cm x 2.0cm x 0.8cm

RM1.90
RM1.90 Add to cart
Quick View
img

124 Skull Color METALLIC Prima Gold 60 ml

Skull Color METALLIC Color 60 ml 

 
Skull Color is a lacquer paint for purpose of using by airbrush. 
 
It is especially designed for painting on plastic model and hobby section. 
 
Instruction : 
 1. Shake it well. 
 2. Remove rubber stopper. 
 3. Pour color. 
 4. Spray! 
 
Note: The actual color of the item may be slightly different from the photos due to the lighting effect and different monitor screen setting.

RM28.00
RM28.00 Add to cart
Quick View
img

119 Skull Color FIGURE Pink Skintone 60 ml

Skull Color FIGURE Color 60 ml 

 
Skull Color is a acrylic paint for purpose of using by airbrush. 
 
It is especially designed for painting on plastic model and hobby section. 
 
Instruction : 
 1. Shake it well. 
 2. Remove rubber stopper. 
 3. Pour color. 
 4. Spray! 
 
Note: The actual color of the item may be slightly different from the photos due to the lighting effect and different monitor screen setting.

RM25.00
RM25.00 Add to cart
Quick View
img
SAVERM2.80

Metal Coloring Clips Alligator Clips with sticks for Airbrush Spray Works (10 Sticks)

  • Metal Aligator Clips with metal sticks for Spray works 
  • useful when you need an extra hand to hold the plastic model parts for spray.
  • 10 units in 1 set with affordable price; hurry to purchase while stock lasts.

RM16.00
RM16.00 Add to cart
Quick View
img
SAVERM3.00

Mr Hobby - MR.Weathering Paste WP05 Color Mud Red

MR.WEATHERING PASTE is very thick, so it is most suitable for reproducing three dimensional stains such as mud. WP03 WET CLEAR can reproduce a moistened texture when it is mixed with other WEATHERING PASTE.When used on its own, you can create a puddle effect.
Usage examples
Various textures can be reproduced depending on the amount of thinner mixed in from thick mud to smudge like stains.

 

By applying thick paint mixed with thinner, you can reproduce cracks.
You can reproduce arid ground areas or dry mud splatter on the underside of a vehicle chassis.

 

When WEATHERING PASTE is mixed with WET CLEAR, the glossy appearance remains even after drying, so a wet texture can be reproduced.


?It can be mixed with WC01 - 08 Weathering Colors.
?Please use WCT101 Weathering Color Thinner to dilute.

RM36.00
RM36.00 Add to cart
Quick View
img
SAVERM5.20

Mr Hobby Mr Compound Fine

This is an easy-to-use liquid type compound. Compatibility with the attached soft ultra fine fiber polishing paper is excellent. Polishing scratches can be kept to a minimum, so the smoothness of the surface of parts is improved and a beautiful glossiness can be achieved.


The rough type is most suitable for the rough polishing of a painted surface or polishing of white metal.

The super fine type is most suitable for final finish of gloss painting or polishing clear parts.

How to use Mr. Compound
1. Using a soft cloth, wipe dirt and grime from the surface you want to polish.
2. Apply a small amount of Mr. Compound to the nonwoven fabric provided or to a soft cloth.
3. Without applying force, lightly and thoroughly polish the surface.

RM32.80
RM32.80 Add to cart
Quick View
img
SAVERM5.10

MoShi Model Tool MS-057 Model Part Joint Guard Glue Pen

  • The pen tip is 3.0mm.
  • This glue pen can be used to strengthen the joint parts, to avoid it becomes loosen and fall apart easily.
  • It can be used to glue etching metal parts too.
  • Easy and convenient
  • How To Use
    1. Apply the glue over the joint parts.
    2. Wait for 1-2 minutes for the glue to dry up and turn transparent.
    3. Once the glue is dried up, fits the parts with the model kit.

RM9.90
RM9.90 Add to cart
Quick View
img
SAVERM3.00

Double Sided Sanding Stick 100 / 180 grit

Sanding Stick 100 - 180 grit


- Double sided sanding stick with different grit numbers: 100 and 180 grit
- Fine sanding/grinding
- Contain 3 different layers: Sand, Eva and PS Rubber
- Light weight and easy for sanding
- Awesome smooth finish result
- Dimension: 17.8cm x 1.8cm x 0.4cm

RM3.00
RM3.00 Add to cart
Quick View
img

DSPIAE BP-SP Joint Strengthening Pen

To fix the loosen joint.


Shake well before use, press the tip down to let the solutions flow out.

Apply a layer of solution on the ball joint, wait for 2-5 minutes or until the solution become translucent.

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM20.00

DSPIAE ST-A 3.0 Ultra Thin Single-Blade Side Cutters Nipper Plier Model Tool (Free Craft Tools Antirust Oil 30ml)

  • Nipper is used only for plastic models, suitable for PS, PP, ABS, PE, RESIN and any plastic diameter less than 3mm.
  • It is not suitable for metal kits.
  • It utilizes a single bladed design that elevates the ability of a nipper to cut plastic smoothly and efficiently.
  • This nipper is produced using specially forged steel that has undergone high-temperature smelting, allowing the rockwell hardness of the blade to reach a rating of 58-64.
  • The blade of the 3.0s is then carefully polished, creating a beautiful mirror-like surface that enhances the smoothness of the cut and improves the comfort of use.
  • The blade edge of the nipper is slightly lower than the blunt end. This is to prevent the nipper from having misalignment issue caused by the stress exerted by the plastic gates during the cutting process.
  • The blunt end is slightly higher than the blade edge allowing the blade edge to land on the blunt end during the cutting process, preventing misalignment issues.
  • It comes with a limit regulator which can use to adjust the blade gap and a nipper protector which helps to avoid damage to the cutting edge cased by accidental collision.
  • Contents:
    • Single-bladed nipper
    • Cowhide nipper protector
    • Limit regulator
    • Cleaning cloth

RM145.00
RM145.00 Add to cart
Quick View
img
SAVERM3.00

Mr Hobby - MR.Weathering Paste WP03 Color Wet Clear

MR.WEATHERING PASTE is very thick, so it is most suitable for reproducing three dimensional stains such as mud. WP03 WET CLEAR can reproduce a moistened texture when it is mixed with other WEATHERING PASTE.When used on its own, you can create a puddle effect.
Usage examples
Various textures can be reproduced depending on the amount of thinner mixed in from thick mud to smudge like stains.

 

By applying thick paint mixed with thinner, you can reproduce cracks.
You can reproduce arid ground areas or dry mud splatter on the underside of a vehicle chassis.

 

When WEATHERING PASTE is mixed with WET CLEAR, the glossy appearance remains even after drying, so a wet texture can be reproduced.


?It can be mixed with WC01 - 08 Weathering Colors.
?Please use WCT101 Weathering Color Thinner to dilute.

RM36.00
RM36.00 Add to cart
Quick View
img
SAVERM1.00

DSPIAE PT-WP Penal Line Eraser Wipe Pen for Model Tool

Erasing Pen
One stop solution for those stubborn stains

Effective Measures
High density PU eraser tip absorbs liquid quickly
Lint free and repeated performance compared with traditional cotton swabs
In-Depth Cleaning
45 degree angled tip with sharp, clean cut.
Sweep those stubborn stains down in hard-to-reach seams and tight corners

Durable and Corrosion Resistant
Constructed with tough PP plastic that easily takes common organic solvents
Easy Maintenance with Tap Water
Clean with DSPIAE's T-08 enamel thinner or tap water
Wipe clean until free of trace
Start another round of cleaning

Quick Replacement
3mm and 5mm spare PU tips available here

Packing Details
Erasing Pen x1
PU tip (5mm) x1
PU tip (3mm) x1

Precaution
Not suitable for children under 14 years of age. Avoid accidental swallowing by infants.
Avoid paint staining, which may result in poor performance.
DO NOT apply brutal force, which may result in breakage of the tip
Keep away from open flame

RM6.00
RM6.00 Add to cart
Quick View
img
SAVERM7.00

Modeling Stainless Steel Thin Blade Side Cutters Nipper Plier Model Tool

Modeling Stainless Steel Thin Blade Side Cutters Nipper Plier

- The blade pursues a balance of hardness, material and angle, and is designed for plastic models.
- In addition, it can easily reach and cut off parts in narrow places as the blade is thin.

RM28.00
RM28.00 Add to cart
Quick View
img
SAVERM5.20

Mr Hobby Mr Compound Coarse 25ml (R191) Polishing Finish Plastic Model Craft Tools

Liquid version that spreads easily and is a snap to wipe off! Uniform particle size makes Mr. Compound ideal for removing scratches and smoothing down surfaces.

How to use Mr. Compound
1. Using a soft cloth, wipe dirt and grime from the surface you want to polish.
2. Apply a small amount of Mr. Compound to the nonwoven fabric provided or to a soft cloth.
3. Without applying force, lightly and thoroughly polish the surface.

RM32.80
RM32.80 Add to cart
Quick View
img
SAVERM4.00

Mr Hobby Mr Clear Glue New

The finished state of adhered parts becomes transparent, so this glue is optimum for gluing clear parts in plastic models. It can be used for handicraft or carpentry because it can adhere to cloth, leather or wood. Fixing time is approx. 5min., time until work can be done on the piece is approx. 60min. and within approx. 24 hours it will harden completely. When excess is exuded, it can be removed with lacquer thinner or nail polish remover if not yet hardened.

* This glue will stick;
Hard plastic, Soft vinyl chloride, Styrofoam, Plated parts, Polystyrene, ABS, Cloth, Felt, Leather, Glass, Stone, Wood, Synthetic rubber, Tile
* This glue will not stick;
Polyethylene, Polypropylene, Silicon resin, Fluorine resin, Precious metals

RM32.00
RM32.00 Add to cart
Quick View
img
SAVERM1.50

Mr Hobby Mr Spare Bottle (18ml)

Mr Hobby Mr Spare Bottle (18ml)


3 size 
- Mr Spare Bottle (18ml)
- Mr Spare Bottle (40ml)
- Mr Spare Bottle (80ml)

RM4.50
RM4.50 Add to cart
Quick View
img

Mr Hobby Mr Spare Bottle (40ml)

Mr Hobby Mr Spare Bottle (18ml)


3 size 
- Mr Spare Bottle (18ml)
- Mr Spare Bottle (40ml)
- Mr Spare Bottle (80ml)

RM8.10
RM8.10 Add to cart
Quick View
img
SAVERM3.20

Mr Hobby Mr Spare Bottle (80ml)

Mr Hobby Mr Spare Bottle (18ml)


3 size 
- Mr Spare Bottle (18ml)
- Mr Spare Bottle (40ml)
- Mr Spare Bottle (80ml)

RM10.80
RM10.80 Add to cart
Quick View
img
SAVERM4.30

Mr. Hobby Mr. Just Super Strong Type Adhesive Glue Gundam Instant Glue Plastic Model Glue

Instant adhesive with excellent shock resistance, most suitable for metal parts.
It is very effective when used for etching.


It comes in a new bottle, which can be opened without using a pin.
(It cannot be used as a container for Just One Push.)

RM30.20
RM30.20 Add to cart
Quick View
img
SAVERM6.10

[CorMake] Panel Line Accent Color - Light Brown (40ml)

Alternative to Tamiya Panel Line enamel paints.

Ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Note:
Plastic parts may become brittle when using Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

Specs:
Type: Panel Line Accent Color 
Colour: Light Brown
Quantity: 40ml

RM13.90
RM13.90 Add to cart
Quick View
img
SAVERM2.20

Mr. Hobby Mr. Just Brush Type (MJ197) Quick Drying Adhesive Glue Gundam Instant Glue Plastic Model Glue

Quick-drying adhesive in a bottle. Use the brush to precisely apply points and lines. 

The special bottle prevents spills and eliminates worries about unintended applications. 
The tip does not become hard and unusable like adhesive in tubes, and the aluminum storage pocket guarantees long-term preservation of the adhesive

RM23.80
RM23.80 Add to cart
Quick View
img
SAVERM5.10

[CorMake] Panel Line Accent Color - Silver (40ml)

Alternative to Tamiya Panel Line enamel paints.

Ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Note:
Plastic parts may become brittle when using Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

Specs:
Type: Panel Line Accent Color 
Colour: Silver
Quantity: 40ml

RM16.90
RM16.90 Add to cart

Showing 871 - 900 of 1466 products