Price Clear







Gundam Parts

Showing 1291 - 1320 of 1320 products

HG 1/100 VF-25F Messiah Valkyrie (Alto Saotome's) Special Water Transfer Decal
SAVERM13.90

HG 1/100 VF-25F Messiah Valkyrie (Alto Saotome's) Special Water Transfer Decal

These waterslide decals were made especially for Bandai's 1/100-scale HG model kit of the VF-25F Messiah Valkyrie piloted by Alto Saotome from "Macross Frontier!" The set is compatible with all three forms: Battroid, Gerwalk, and Fighter. Place your order today!

RM28.00
Bandai Water Decal #127 Mobile Suit Gundam OO The Movie Multiuse 1
SAVERM6.10

Bandai Water Decal #127 Mobile Suit Gundam OO The Movie Multiuse 1

These are high-quality & detailed waterslide decals to add custom realistic markings for your gundam models. 
Each sheet measures at 19cm x 11cm .
Water Decal include Gundam 00 Qan[t], Gundam Zabanya, dan Brave

RM17.90
Water Decal for HG 1/144 Strike Freedom Revive
SAVERM7.00

Water Decal for HG 1/144 Strike Freedom Revive

Water Decal HG 1/144 Strike Freedom Revive

This is a High Quality Water Decal, it is not a sticker. 

- For model kit HG 1/144 Strike Freedom Revive
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from China

RM5.00
Bandai Water Decal #46 Gundam OO Multiuse 1 (Celestial Being SR)
SAVERM6.10

Bandai Water Decal #46 Gundam OO Multiuse 1 (Celestial Being SR)

The term Gunpla refers to the mecha models, characters or plastic vehicles from the Japanese Gundam franchise and marketed by Bandai; it results from the contraction of "Gundam plastic model". Appeared in 1980.


THE GUNPLA PHILOSOPHY: THE MODEL FOR EVERYONE! "without glue or paint

All Gundam models are characterized by two essential properties: 

- the parts are nestable 

- and they're molded in color. 


Gunpla are classified by ranges (called "grade") according to their quality and/or size. The main ones are :

- NG No Grade (1980), although the term only appears much later, it refers retrospectively to the first models released as early as 1980.

- HG High Grade (1990), first range of higher quality at a scale of 1/144.

- MG Master Grade (1995), of higher quality than HG High Grade with, for example, the internal mechanics fully modeled at a scale of 1/100.

- PG Perfect Grade (1998), the most technically advanced range at a scale of 1/60.

- FG First Grade (1999), the inexpensive clip-on range.

- HGUC High Grade Universal Century (1999), a popular re-edition of the Universal Century robots.

- EX-model (2001), range dedicated not to robots but to vehicles and related flying machines.

- MS Mega Size (2009), 1/48 scale range.

- RG Real Grade (2010), similar to the MG Master Grade with a pushed internal skeleton but at a size called 1/144 like the "HG High Grade".

- RE/100 Reborn One Hundred (2014), new range of 1/100 scale gunplays.

- Super Deformed Gundam or SD Gundam is a Japanese animation franchise whose works are parodies of the Gundam saga, adopting the graphic codes of the super deformed. 

 

However, the exhaustive classification is much more complex, since it depends on the scale (from 1/550 to 1/35), improvements (the master grade range exists in versions 1.5, 2.0 and 3.0) and special events (a Ver.G 30th range was released for the thirtieth anniversary of the franchise for example.

RM17.90
ABS Pla Plate thinness 0.5 mm (10 cm x 20 cm) For Gunpla Modification or Customization
SAVERM1.00

ABS Pla Plate thinness 0.5 mm (10 cm x 20 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 0.5 mm
Size : 10 cm x 20 cm 
Color : White
Material : ABS
Quantity : 1 piece

RM1.60
RG/HG Gundam Acrylic Display Case 15cm (L) x 15cm (W) x 25cm (H)
SAVERM5.00

RG/HG Gundam Acrylic Display Case 15cm (L) x 15cm (W) x 25cm (H)

- HG / RG Gundam Display Case,  suitable for any HG / RG Gundam 
- Able to fit HG or RG  1/144 Scale Gundam with action base (without wing expansion)
- Self assembly required + solid Strong support on the edge of the glass. 
- Case Dimension : 15cm (L) x 15cm (W) x 25cm (H)
- 3mm Gloss black color base. 
- Each piece is cover with plastic protector

RM16.90
Red Lotus 1/100 Proud Defender Flying Backpack Mighty Freedom Conversion
SAVERM7.00

Red Lotus 1/100 Proud Defender Flying Backpack Mighty Freedom Conversion

Brand: Red Lotus

Grade: MG 1/100

What's in the box: 

Configuration:
* Floating Ranger Cannons x8
* Katanas x2 (one long, one short)
* First Batch Pre-order Bonus: Additional transparent parts + Pink LED light set (While stocks last*)

Features:

* Detachable Floating Ranger Cannons: The cannons can be detached and repositioned for dynamic displays.
* Installable Pink LED Light Set: The backpack is designed to accommodate the included pink LED lights for enhanced visual effects.
* Movable and Extendable Electroplated Gold Wing Sections: The gold-plated parts of the wings can be moved and extended.
* Compatible Back Mounts: The backpack is compatible with multiple model kits, including MG Freedom 2.0, MB Strike Freedom, MGEX Strike Freedom, MG Strike Freedom, MG Astray, and MB Strike Freedom (Daban 8802)

RM69.00
DDB HG Infinite Justice Gundam Type II Wing of Light Expansion Special Effect with Display Base
SAVERM6.90

DDB HG Infinite Justice Gundam Type II Wing of Light Expansion Special Effect with Display Base

DDB Infinite Justice Gundam Type II Wing of Light Expansion Special Effect with Display Base

Grade : High Grade
Scale : 1/144

Content :
1. Clear Blue Wing Effect x 2
2. Clear Blue Effect Set x 2
3. Backpack Holder Connector x 2
4. Dedicated Display Base x 1

Please not that this is NOT-Bandai product

RM35.00
[Water Decal][Bandai] Gundam Decal RG 1/144 RX-78-2 Gundam #84
SAVERM6.10

[Water Decal][Bandai] Gundam Decal RG 1/144 RX-78-2 Gundam #84

[Bandai] Water Decal for RG 1/144 RX-78-2 Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RG 1/144 RX-78-2
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits

RM17.90
Weapon Display Base 01
SAVERM17.40

Weapon Display Base 01

Bandai's new Weapon Display Base expands the display fun even further after assembly of your favorite model kits! All the parts are made of clear plastic; you'll get four bases and 12 support posts. Joint parts that can be connected to action bases (sold separately) are also included. Use them in combination with the action bases for a more realistic display! This item will help you increase the power and dynamism of your displays -- order yours today!

[Set Contents]:

* Bases (x4)
* Short arms (x6)
* Long arms (x6)
* Joint parts (x1 set)

RM24.50
SD, BB, EG, HG and RG Gundam Action Base 5 Tapak Gundam XH-554 (White)
SAVERM3.10

SD, BB, EG, HG and RG Gundam Action Base 5 Tapak Gundam XH-554 (White)

Action  Base for HG / RG / EG / BB / SD Gundam

Similar to Action Base 5 
Suitable for 1/144 Scale
Base are combinable each other

3 color for selection
- Black
- Clear
- White

Note : This is not Bandai product

RM6.80
[Da Lin] Water Decal HG 1/144 HGIBO Bael Gundam
SAVERM10.10

[Da Lin] Water Decal HG 1/144 HGIBO Bael Gundam

[Da Lin] Water Decal HGIBO 1/44 Bael Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HGIBO 1/44 Bael Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
[Da Lin] Water Decal HG 1/144 Red and Blue MSM-07 Z'Gok (2 Set)
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Red and Blue MSM-07 Z'Gok (2 Set)

[Da Lin] Water Decal HG 1/144 Red and Blue MSM-07 Z\'Gok (2 Set)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Red and Blue MSM-07 Z\'Gok (2 Set)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
[Da Lin] Water Decal HG 1/144 Mighty Strike Freedom
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Mighty Strike Freedom

[Da Lin] Water Decal HG 1/144 Mighty Strike Freedom

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Mighty Strike Freedom
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
Option Parts Set Gunpla 17 (Binder Gun)
SAVERM7.90

Option Parts Set Gunpla 17 (Binder Gun)

The 17th in the Option Parts Set Series is the Binder Gun! By using the included joint parts, you can change into a variety of weapon modes!!
By attaching it to the backpack, it can be equipped as a binder that strengthens posture control capabilities.
By attaching a grip to the binder part, it can be switched into sword mode and rifle mode.
Numerous joint parts are included, and by combining them, it can be turned into a binder gun.
Try attaching it to the HG series while imagining various battles.

[Accessories]
  • 2 each of binder parts (large and small)
  • 1 gun part
  • 1 set of joint parts

RM28.00
HG 1/100 VF-31J Siegfried (Hayate Immelmann Use) Water Decals
SAVERM13.90

HG 1/100 VF-31J Siegfried (Hayate Immelmann Use) Water Decals

Introducing a special water transfer decal to pursue the quality of the HG 1/100 VF-31J Siegfried (Hayate Immelmans) aircraft model!
For HG 1/100 VF-31J Siegfried (Hayate Immelmans) only.

[Accessories]
Water transfer decal x 1

RM28.00
SD, BB, EG, HG and RG Gundam Action Base 5 Tapak Gundam XH-554 (Black)
SAVERM3.10

SD, BB, EG, HG and RG Gundam Action Base 5 Tapak Gundam XH-554 (Black)

Action  Base for HG / RG / EG / BB / SD Gundam

Similar to Action Base 5 
Suitable for 1/144 Scale
Base are combinable each other

3 color for selection
- Black
- Clear
- White

Note : This is not Bandai product

RM6.80
HG 1/100 VF-31S Siegfried (Arad Molders') Special Water Transfer Decal
SAVERM13.90

HG 1/100 VF-31S Siegfried (Arad Molders') Special Water Transfer Decal

These waterslide decals were made especially for Bandai's 1/100-scale HG model kit of the VF-312S Siegfried piloted by Arad Molders from "Macross Delta"! 

The set is compatible with all three forms: Battroid, Gerwalk, and Fighter. Order yours today!

RM28.00
Bandai Action Base 6 (Clear Color) 1 set (No packaging)
SAVERM6.00

Bandai Action Base 6 (Clear Color) 1 set (No packaging)

Perfect for displaying small plastic models, such as SD size, BB size, HG size, Figure Rise Standard Kit.

  • Bandai Brand
  • The base parts are approximately 90mm x 60mm.
  • Includes 1 sets of 3x prop parts.
  • The tip can be customized with either a shaft-connecting joint or a C-type arm. 

[Accessories]:

  • Base parts x 1
  • Pillar parts x 1
  • C type arm x 1
  • Joint parts x 1 set

RM12.00
DDB MGSD Meteor Mobile Suit Embedded Tactical Enforcer with Water Decal
SAVERM18.00

DDB MGSD Meteor Mobile Suit Embedded Tactical Enforcer with Water Decal

DDB Corgi Mobile Suit Embedded Tactical Enforcer 01 MGSD-Meteor Model Kit

Product Features:

Size: 43.8cm length
Made of plastic
Compatible with MGSD Freedom Gundam
Non scale assembly plastic model
No adhesives required for assembly

Box Contents:
Pieces to build MGSD-Meteor
Sticker decal

RM80.00
Plastic Flat-Shape Runners Holder (20 slots)
SAVERM3.90

Plastic Flat-Shape Runners Holder (20 slots)

Flat Shape Plastic Runner Holder / Shelf

Use this runner holder to hold all the runners when assemble Gunpla , and you will get the parts you need quickly.

- Material : ABS
- 20 Slots
- Size : 40cm x 12cm x 3cm

RM9.00
Option Parts Set Gunpla 18 (Build Booster Set)
SAVERM27.40

Option Parts Set Gunpla 18 (Build Booster Set)

The Build Booster and Build Booster Mk-II from the "Gundam Build" series are now available as a set! Combine the two boosters to enjoy a variety of customizations!

The Build Booster and Build Booster Mk-II can transform from a fighter to a backpack form.
The backpack form can be attached to various mecha using the included joints.
Each part can be removed and used as a weapon.
Parts other than weapons can also be customized into various Gunpla using the included joint parts.


Order yours today!

[Includes]:
- Build Booster
- Build Booster Mk-II

RM38.50
Option Parts Set Gunpla 20 (Ride-On Set)
SAVERM44.80

Option Parts Set Gunpla 20 (Ride-On Set)

The Mega Ride Launcher and Machine Rider are now available as an option parts set from Bandai! 

The Mega Ride Launcher can transform from Mega Rider mode to Mega Launcher mode; you can recreate mobile-suit towing scenes when it's in Mega Rider mode. 

Joint parts are included that are compatible with each HG series. 

The Machine Rider can transform into ride and stand positions, allowing you to pilot a variety of Gunpla depending on your imagination! 
Three different front cowl patterns are included. 
Make your Gunpla displays more dynamic, and order yours today!

[Set Contents]:

* Mega Ride Launcher 
* Machine Rider

RM63.00

KOSMOS LED SET for MGEX 1/100 Strike Freedom Gundam

Compatible with Bandai MGEX 1/100 Strike Freedom Gundam

Upgrade your 1/100 MGEX Strike Freedom with the KOSMOS LED Light System. This third-party accessory kit adds dynamic RGB illumination to the head and wings via 12 independent light zones. It features smartphone app and remote control compatibility without hindering model articulation.

Key Features
- Independent Zones: Control the head, left wing, and right wing separately for custom dual-color effects.
- Smart Control: Manage dynamic patterns and colors using a dedicated mobile app or remote.
- Seamless Fit: Includes redesigned transparent runner plates and parts that integrate smoothly without heavy frame modification.
- Dual Power: Runs on either 3 x AA batteries or a convenient USB-C connection.

RM198.00
HG 1/144 VF-25G Messiah Valkyrie Michael Custom Water Decals
SAVERM13.90

HG 1/144 VF-25G Messiah Valkyrie Michael Custom Water Decals

Bandai brings us a set of decals made especially for their 1/100-scale HG model kit of Michael Blanc's custom VF-25G Messiah Valkyrie, as seen in "Macross Frontier"! 
A wide variety of caution marks and other markings is included.

RM28.00

PVC Pla Plate thinness 3.0 mm (20cm x 30cm) for Gunpla Model Modification or Customization

PVC Pla Plate for Gunpla Modification or Customization


Thinness : 3.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : PVC
Quantity : 1 piece

PVC \"Pla Plates\" (plastic sheets) are highly suitable for modeling, particularly for scratch-building, adding surface details, or creating architectural mockups. While traditional \"Pla Plate\" often refers to polystyrene (PS), PVC variants are common in the hobby market and offer distinct properties such as higher stiffness and better resistance to moisture and salts.

RM9.00
ABS Pla Plate thinness 5.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization
SAVERM3.10

ABS Pla Plate thinness 5.0 mm (20 cm x 30 cm) For Gunpla Modification or Customization

ABS Pla Plate for Gunpla Modification or Customization


Thinness : 5.0 mm
Size : 20 cm x 30 cm  
Color : White
Material : ABS
Quantity : 1 piece

ABS (Acrylonitrile Butadiene Styrene) Plate
ABS is favored for parts that need to withstand mechanical stress or heat. 

Best for: Custom weapons, inner frames, or joints that might rub against other parts.

Handling: It is more elastic than standard styrene, meaning it is less likely to shatter if dropped. However, it is harder to bond with standard hobby cement; you should use ABS-specific cement or super glue.

Warning: Certain \"pour-type\" panel line markers can make ABS brittle and cause it to crack if applied directly to the bare plastic.

RM13.80
[Da Lin] Water Decal for HG 1/144 Pale Rider (Ground Heavy Equipment Type)
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Pale Rider (Ground Heavy Equipment Type)

[Da Lin] Water Decal HG 1/144 Pale Rider (Ground Heavy Equipment Type)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Pale Rider (Ground Heavy Equipment Type)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
[CorMake] Mark Softer for Water Decal 40ML
SAVERM20.00

[CorMake] Mark Softer for Water Decal 40ML

This is a softening agent for slide marks. It has the effect of closely adhering slidemarks to curved surfaces.

* First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
* Apply decal over it.
* Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
* The decal will stick perfectly, even on uneven or curved surfaces.
* If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert softer through the resulting hole. The air will escape, and the decal will stick down firmly.
* Capacity: 40ML

RM9.90
HG 1/144 Turn A Gundam Butterfly Wings Effect Parts + Action base 2
SAVERM4.00

HG 1/144 Turn A Gundam Butterfly Wings Effect Parts + Action base 2

Wing of Light effect for HG Turn A Gundam.


Package include :
1. Moonlight Butterfly Wings of Light for Turn Gundam - 1 pair
2. Clear Action Base 2
3. Back Connector 1 set

Notes: 
  • This is not Bandai Product
  • Turn A Gundam is not included

RM22.90

Showing 1291 - 1320 of 1320 products

Contact Us