Price Clear







Gundam Model Kits

Showing 1051 - 1080 of 2709 products

img
SAVERM21.90

[015] HG 1/144 Gundam Nadleeh

A Gundam that hidden inside the Virtue's armor, this agile unit features deteriorated ribbon cables that give the appearance of hair. The kit includes beam rifle, shield and beam sabers.
  • Item Size/Weight : 30 x 19 x 5.3 cm / 234g

RM50.00
img
SAVERM29.90

[035] HG 1/144 Legend Gundam

- One of the more overdone designs in Gundam! - This HG kit of the Legend Gundam comes with the clear blue "trails" leading from the whopping big Dragoon Unit. - All the parts are molded in colour and snap together for ease in assembly. - No base is included, though you can mount the finished model on the bases that have been included in previous HG kits Item Size/Weight : 31 x 19 x 7.6 cm / 314g

RM60.00
img
SAVERM21.30

[007] HG 1/144 Graham`s Union Flag Custom

A custom Flag unit for Graham Aker operated by the Union in the TV series "Gundam 00". Can transform from mobile suit to flight unit mode. Special Rifle and beam saber included.

RM38.60
img
SAVERM19.80

[314] Chouryou Gerugugu (SD)

Item Size/Weight : 20.5 x 15 x 5 cm / 162g

RM16.10
img
SAVERM3.90

[047] SDBB Gundam Epyon

SD Epyon non-scaled.

RM20.00
img
SAVERM32.30

[080] HGUC 1/144 Blue Destiny Unit 1

- MS that appeared in Sega Saturn [blue of Mobile Suit Gundam Gaiden I Senritsu]
Commercialized in HGUC series [Blue Destiny Unit 1].
- Armed Short 100mm machine gun and shield, beam saber are included.
- 100mm machine gun magazine is removable. Replacing the magazine by making a wrist hold
Reproduced conversion action.
- Short Bipod shield is possible by standing arm. Hide behind the shield
You can reproduce the scene of the shooting is!
- Saber storage unit on the outside of the shin is extended replacement, represent the internal mecha.

RM56.60
img
SAVERM30.60

[082] HGUC 1/144Blue Destiny Unit 3

Unit 3 of the Blue Destiny series, modified RX-79 units, features beam rifle, shield, and beam saber stored in leg.


Item Size/Weight : 31 x 19 x 7.7 cm / 367g

RM58.30
img
SAVERM26.90

[097] HGUC 1/144 Jegan

 Mass produced mobile suit used by the EFSF in Char's counterattack. Comes equiped with beam rifle, shield with integrated missiles, and beam saber.

- Accessories: Beam Rifle × 1, shield × 1, beam saber × 1 Item Size/Weight : 31 x 19 x 7.3 cm / 292g 

RM62.00
img
SAVERM23.90

[058] HGUC 1/144 RX-110 Gabthley

Item Size/Weight : 31 x 19 x 7.5 cm / 367g

RM72.00
img
SAVERM44.80

Bandai - [11] SD Gundam Zhou Yu Gundam

- Bandai [03] - SD Gundam Zhou Yu Gundam. - Completed modal in a box. - Manufactured by Bandai. - Original price is 59.9 now selling at 18.00.

RM15.10
img
SAVERM44.80

Bandai - [10] SD Gundam Kong Ming Gundam

- Bandai [03] - SD Gundam Kong Ming Gundam. - Completed modal in a box. - Manufactured by Bandai. - Original price is 59.9 now selling at 18.00.

RM15.10
img
SAVERM57.60

[007] NG 1/100 Blaze ZAKU Phantom Heine Westenfluss Custom

#07 Blaze Zaku Phantom [Heine custom]

Heine Westenfluss' custom Blaze Zaku Phantom from the popular series Gundam Seed Destiny is a model kit loaded with extras. The Blaze Zaku Phantom comes with a Beam Tomahawk, machine gun, two shields, and lots of movable joints allowing the model to reproduce many stances seen in the show.

RM98.30
img
SAVERM21.90

[030] HG 1/144 RX-178 Gundam Mk-II (Titans)

Item Size/Weight : 29 x 19 x 6 cm / 295g

RM38.00
img
SAVERM33.80

[021] HGBF 1/144 Gundam Ez-SR

This new Gundam from "Gundam Build Fighters Try" can be built into any one of these three versions: the Ez-SR1 Intruder, the Ez-SR2 Eliminator, and the Ez-SR3 Shadow Phantom. Stickers are included for additional touch up.

RM86.00
img
SAVERM11.90

[014] HGBC 1/144 Powered Arms Powerder

Powered Arms Powereder build fighters support weapon


Scale : 1/144
Series : Build fighters

RM24.00
img
SAVERM114.50

MG 1/100 Gundam Age-2 Dark Hound

  • Fully transformable AGE Master Grade: The Dark Hound!
  • Complete transformation to flight form!
  • In addition to each weapon, a variety of manipulator parts are included.
  • Using an Action Base (sold separately) enables easy and accurate aerial posing.
  • Piloted by Bishidian Pirate Captain Ash, the Dark Hound is a repaired and renovated Gundam AGE-2 Normal.
  • Accessories: DODS Lancer, Anchor Shot x2, Beam Saber x2, Pilot Figure (Sitting, 

RM161.00
img
SAVERM47.30

[145] HGUC 1/144 Hambrabi

  • Blasting out of Mobile Suit Zeta Gundam, ace pilot Yazan Gable`s transformable MS joins the High Grade line after 20 years! 
  • Features a a ton of weapons and a transformation gimmick to shift into MA mode!
  • In addition to the Suit`s signature Sea Snake weapon, this kit includes the massive Feyadeen Rifle and beam saber! 
  • Features manipulator replacement for easy transformation.
  • Officially adopted by the Titans as an variable Mobile Suit, the RX-139 Hambrabi features a simplified frame and a bevy of powerful electromagnetic weaponry! 
  • Accessories: Beam Saber ×2, Sea Snake, Feyadeen Rifle, Grip Manipulator (Left, Right),
  • Fist (Left and Right), Palm (Left and Right)
  • Item Size/Weight : 31.1 x 19.1 x 7.2 cm / 297g

RM66.50
img
SAVERM49.90

[147] HGUC 1/44 Byarlant Custom

  • Accessories: beam saber × 2, the propellant tank × 2, mount parts for action based - Item Size : 31 x 20 x 10 cm.
Wikipedia
After the Gryps Conflict of UC 0087, The Earth Federation reclaimed the data of the RX-160 Byarlant, being only non-transformable mobile suit with sustained atmospheric flight ability. However this never happened until in UC 0096, in where the mobile suit researchers redeveloped the said mobile suit into the RX-160S Byarlant Custom. The Byarlant Custom possesses enhanced speed, agility, and self-sustained atmospheric flight over the original and its capabilities were achieved through the incorporation of powerful thrusters in its shoulders, waist, and back with two large-capacity fuel tanks in its back to keep the thrusters fueled. It also has new feet design derived from the NRX-055 Baund Doc, the heels and toes can be fold into claws.
Being testbed mobile suit, it doesn't fix Byarlant's flaw at limited armaments. Instead, Byarlant Custom is refitted with parts from various Titans' mobile suit.

The Mono-eye sensor was replaced with EFF standard compound type sensors. Two Byarlant Custom units were produced at Torrington Base: Unit 01, fitted with leg units and claw manipulators derived from the RX-110 Gabthley, and Unit 02, which was scheduled to be equipped with a thruster unit developed from the ORX-005 Gaplant. Development staff have referred to the project as a composite "creature" (Chimera) of Titans mobile suits.

Weapons
  • Mega Particle Cannon - A fixed armament mounted on Byarlant Custom's forearms, it works as the only range weapons the mobile suit has, the power is rated at 4.7MW. It seems to have a higher rate of fire in place of beam thickness, but that in no way makes it any less dangerous.
  • Beam Saber - Unlike the original Byarlant, there are no beam sabers stored in the recharge racks of the arms. Instead the beam saber is made with the mega particle cannon emitter on each arm.
  • Claw Arm - Since its production, the Byarlant Custom were armed with two claw arms for close combat. These can be only used if the power supply of the mobile suit is low. The claw arms taken from the Gabthley seem stronger, but are even more unsuitable for wielding weapons.
The Assault of Torrington Base
The Byarlant Custom was first deployed against the Zeon remnants during the assault of Torrington Base. During its first deployment the Byarlant Custom destroyed multiple Zeon remnant mobile suits, including two AMS-129M Zee Zulu. The Byarlant Custom pushed back the Zeon remnant forces with the help of Londo Bell's Tri-Stars mobile suit team and other Earth Federation forces.

RM106.00
img
SAVERM19.90

[374] SDBB Gundam Legilis

- SD is MS comes a new Vu~eigan!
- Can be equipped with saber!
- And the body can be separated Regirusukoa!
- Replacement of gimmick by switching pupil (Evasive Angles cancer type, Gundam type) with!

- Accessories: Les Gills rifle, which Gills shield, beam saber

RM40.00
img
SAVERM30.40

Blitz Gundam (1/100)

  • Item Size/Weight : 31 x 20 x 10.2 cm / 450g
  • For more explanation on the gundam modelling kits you may check out the master grade Blitz Gundam 1/100 here
  • Personal comment: Modelling kits Waist mobility can be improve, the rest is fine ~
  • Weapons in this modelling kits were standards : "Gleipnir" Anchor,50mm High-energy Beam Rifle,"Trikeros" Offense/Defense System, Lancer Darts, Beam Saber
  • Recommend to buy an action base for this.

RM89.50
img
SAVERM44.40

Duel Gundam Assault Shroud (1/100)

Item Size/Weight : 31 x 20 x 11.2 cm / 499g

RM87.50
img
SAVERM7.80

[12] FG 1/144 Justice Gundam

- Description: Seed Gundam - Seed Gundam - Justice Gundam 1/144 scale - Size: 8 x 6 x 2 (in) - Weight: 20 oz

RM21.10
img
SAVERM8.30

[02] FG 1/144 Bandai Duel Gundam

Simple kit of the Duel Gundam featured in Gundam Seed. This low-priced kit lacks complete articulation like the more expensive HGUC and Master Grade kits, but it is still rather nicely detailed, and very easy to assemble. Basic articulation at the hips and shoulders, and some slight movement at the ankles, keeping polycaps and pieces to a minimum. A great model for someone just starting out, or if you're looking for something to detail on your own as a static display piece.

RM13.60
img
SAVERM4.40

[14] FG 1/144 Strike Freedom Gundam

Very nice little 1/144 scale injection plastic model of the Strike Freedom Gundam, from Gundam SEED DESTINY. All the parts are molded in colour and snap together, so no paint or glue are required; stickers are included for extra detail. Polycaps allow smooth movement at the joints.

RM24.50
img
SAVERM11.00

[WF-10] 1/144 Gundam Epyon

Antagonist transforming Gundam from tv series "Gundam Wing." Features large beam sword, heat whip, and includes figure of Milliardo Peacecraft.

RM24.00
img
SAVERM4.40

[08] FG 1/144 Sword Strike Gundam

Very nice little 1/144 scale injection plastic model of the Strike Freedom Gundam, from Gundam SEED DESTINY. All the parts are molded in colour and snap together, so no paint or glue are required; stickers are included for extra detail. Polycaps allow smooth movement at the joints. - Item Size/Weight : 20.5 x 15 x 5.2 cm / 140g

RM24.50
img
SAVERM7.80

[12] FG 1/144 Slash Zaku Phantom

- Very nice little 1/144 scale injection plastic model of the Strike Freedom Gundam, from Gundam SEED DESTINY. All the parts are molded in colour and snap together, so no paint or glue are required; stickers are included for extra detail. Polycaps allow smooth movement at the joints. - Expand the range of motion due to poly-iron dumbbell-type cap. - Item Size/Weight : 20.5 x 15 x 5.2 cm / 142g

RM21.10
img
SAVERM33.90

[05] HG 1/100 Gundam Epyon

From Gundam Wing comes the impressive transformable Gundam Epyon. Designed as a close combat mobile suit embodying the spirit of a duelist, this Gundam carries an iconicly large beam saber powered by its own reactor and a heat whip capable of melting the toughest steel. The HG 1/100 kit briliantly captures the menacing look of Epyon while being easy to assemble and transforming into its twin headed dragon mobile armor mode.

RM55.00
img
SAVERM33.90

[01] HG 1/100 Wing Gundam

Lead mecha design from the anime TV series "Gundam Wing." This action figure model kit features specially chromed plastic on all yellow parts to give off a bright metalic hue. Is transformable from "Bird Mode" to "mobile suit mode" without part swapping and includes extra effects to simulate fast speeds on wings. Buster rifle, beam saber included. Clear green jewel sticker provided to replicate search eye on chest.



RM55.00
img
SAVERM23.90

[07] HG 1/100 Gundam Deathscythe Hell

Upgraded form of Deathscythe in Gundam Wing TV series. This action figure model kit featuries a twin beam scythe with adjustable scythe blades and working buster shield along with articulated Active Cloak that can open and close. Specially chromed plastic on all yellow parts give off a bright metalic hue.

RM84.00

Showing 1051 - 1080 of 2709 products