• Home
  • Showing Gundam Parts product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts product(s)

Showing 151 - 180 of 1224 products

Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (C9, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (C10, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (C11, Red) (2 Units)

[Metal Part] Red Metal Thruster Vents (C11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Red plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B2, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B2)

  • Specifications : Maximum diameter 6.0mm, Height 2.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B3, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B3)

  • Specifications : Maximum diameter 7.0mm, Height 5.5mm, Joint hole Diameter 3.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (3.0mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B4, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B4)

  • Specifications : Maximum diameter 5.0mm, Height 4.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B8, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B8)

  • Specifications : Maximum diameter 7.5mm, Height 7.0mm, Joint hole Diameter 1.5mm
  • Thruster Pin : 3.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.90

[Metal Part] Metal Thruster / Vents for Gundam Kit (B9, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B9)

  • Specifications : Maximum diameter 12.0mm, Height 5.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 5.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM9.10
RM9.10 Add to cart
Quick View
img
SAVERM7.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (B10, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B10)

  • Specifications : Maximum diameter 18.0mm, Height 10.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM3.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (B11, Blue) (2 Units)

[Metal Part] Blue Metal Thruster Vents (B11)

  • Specifications : Maximum diameter 20.0mm, Height 13.0mm, Joint hole Diameter 2.0mm
  • Thruster Pin : 6.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part is Sliver plated, Internal part is Blue plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM20.80
RM20.80 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (N1, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N1)

  • Specifications : Maximum diameter 6.0mm, Height 6.0mm, Joint hole Diameter 1.4mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.4mm)
2)Apply cement to ensure the center joint tightened

RM7.80
RM7.80 Add to cart
Quick View
img
SAVERM4.30

[Metal Part] Metal Thruster / Vents for Gundam Kit (N2, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N2)

  • Specifications : Maximum diameter 8.0mm, Height 8.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM11.70
RM11.70 Add to cart
Quick View
img
SAVERM4.00

[Metal Part] Metal Thruster / Vents for Gundam Kit (N3, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N3)

  • Specifications : Maximum diameter 10.0mm, Height 10.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM13.00
RM13.00 Add to cart
Quick View
img
SAVERM3.70

[Metal Part] Metal Thruster / Vents for Gundam Kit (N4, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N4)

  • Specifications : Maximum diameter 12.0mm, Height 12.0mm, Joint hole Diameter 2.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.5mm)
2)Apply cement to ensure the center joint tightened

RM14.30
RM14.30 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (N5, Silver) (2 Units)

[Metal Part] Sliver Metal Thruster Vents (N5)

  • Specifications : Maximum diameter 6.0mm, Height 3.0mm, Joint hole Diameter 1.5mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.5mm)
2)Apply cement to ensure the center joint tightened

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM8.25

[Metal Part] Energy Cable Tubes Pipes (M Size, 4mm, Gold)

4mm M Energy Cable Tubes Pipes Metal Parts

A brand-new, unused, unopened, undamaged item

Ring Diameter : 4mm
Color : Gold

Package include
- 20 units Energy Tube Ring
- 1 20 cm Spring pipe
 
(This product not include any figure)

RM9.75
RM9.75 Add to cart
Quick View
img
SAVERM4.60

[Metal Part] Joining Angle Detailing Enhancement Parts for MG 1/100 Model Kit

Joining Angle Detailing Enhancement Parts

- Maximum diameter : 9 mm 
- Part Long : 3.8 mm 
- Each set got 2 unit enhancement metal part 
- Total 4 sets per pack  

Suitable for Gundam Arm and Leg joining angle customization.

RM10.40
RM10.40 Add to cart
Quick View
img
SAVERM5.50

[Metal Part] Turbine / Turbcharger Screw - 6 units

Turbcharger Screw Metal Parts
- Maximum diameter : 6.0 mm 
- Part Long : 2.0 mm 
- Joint hole diameter : 2.0 mm
- Each set got 1 unit Turbcharger Screw 
- Total 6 sets per pack  

Suitable for Thruster and Vent customization.

RM6.50
RM6.50 Add to cart
Quick View
img
SAVERM4.80

[Metal Part] 3.0mm Ribbed Shell Screw * 4 units

3.0mm Ribbed Shell Screw metal parts

- Easy installing with minor cement / glue 
- Widest diameter : 3.0 mm 
- Part Length : 2.0 mm 
- Each set got 1 unit ribbed shell and 1 unit screw core 
- Total 4 sets per pack  

Suitable for HG and MG scale Gundam Metal Parts customization

RM5.20
RM5.20 Add to cart
Quick View
img
SAVERM7.10

[Da Lin] Water Decal for MG 1/100 Gundam Double X (Bronzing Color Coating)

[Da Lin] Water Decal for MG 1/100 Gundam Double X (Bronzing Color Coating) 

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for MG Gundam Double X Water Decal
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for  MG 1/100 RM. Aile Strike Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Black)

[Third Party] Single Stand Action Base MG/RG/HG (Black)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
RM16.50 Add to cart
Quick View
img
SAVERM13.00

HG/RG/MG Gundam Display Case with LED (20x20x30 cm)

Brand: VT

- Suitable for any HG/RG/PG Gundam (MG kits without wing expansion and action base)
- Size : 20cm (width) x 20cm (length) x 30cm (height)
- Built in LED unit (White color only) (no lighting mode)
- USB cable is included
- Dustproof display case
- Self assembly required + solid strong support on the edge of the glass. 
- Able to fit small size HG and RG model kits with action base.
- Power adapter is not included
- Support power bank and smart phone adapter for power supply

RM55.00
RM55.00 Add to cart
Quick View
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Red)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Red)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
RM16.50 Add to cart
Quick View
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Blue)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Blue)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
RM16.50 Add to cart
Quick View
img
SAVERM3.40

[Third Party] Single Stand Action Base 4 MG/RG/HG (Clear Green)

[Third Party] Single Stand Action Base MG/RG/HG (Clear Green)


- This is non-Bandai product
- Suitable for 1/144 or 1/100 Scale Gunpla Model
- Many colors for selection (Black, White, Clear Red, Clear Blue, Clear Green etc ..)
- Made by PVC Plastic
- Easy assembly, no need cements/ glue
- Variety of combination, can join more then 1 unit to make a biggest base.

RM16.50
RM16.50 Add to cart
Quick View
img
SAVERM6.80

[Metal Part] Metal Thruster / Vents for Gundam Kit (G3, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G3, Silver)

  • Specifications : Maximum diameter 10mm, Height 10mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM13.20
RM13.20 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G1, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G1, Silver)

  • Specifications : Maximum diameter 6mm, Height 6mm, Joint hole Diameter 1.2mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.2mm)
2)Apply cement to ensure the center joint tightened

RM11.50
RM11.50 Add to cart
Quick View
img
SAVERM6.50

[Metal Part] Metal Thruster / Vents for Gundam Kit (G2, Silver) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (G2, Silver)

  • Specifications : Maximum diameter 8mm, Height 8mm, Joint hole Diameter 1.3mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Diecast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (1.3mm)
2)Apply cement to ensure the center joint tightened

RM12.50
RM12.50 Add to cart
Quick View
img
SAVERM6.20

[Metal Part] Metal Thruster / Vents for Gundam Kit (Y6, Gold) (2 Units)

[Metal Part]  Metal Thruster / Vents for Gundam Kit (Y6, Gold)

  • Specifications : Maximum diameter 15mm, Height 12mm, Joint hole Diameter 2.0mm
  • 2 units (1 pair) per package
  • Contain 2 parts: External part and Internal part is Sliver plated
  • Material: Die-cast
  • Stainless
Installation guide:

1)Requires drilling works to create a joining point (2.0mm)
2)Apply cement to ensure the center joint tightened

RM11.80
RM11.80 Add to cart

Showing 151 - 180 of 1224 products