The massive weapons Gundam featured in Mobile Suit Gundam 0083 Stardust Memory has joined the SD model kit series. The GP03 Stamen is removable from the huge burner setup, and it also comes with two beam sabers, beam rifle, bazooka and shield. 

[224] SD Gundam - AMA-X2 Neue-Ziel (SD)

- The removable armor, RX-reproducible in the 78 Gundam retrofits. - Support the original mechanical warrior BB, also included G-based, all in 12 movable joints.

[281] Gunner Zaku Warrior Lunamaria Custom(SD)

ZGMF-1001/M Blaze Zaku Phantom Rey Za Burrel Custom

Blaze Zaku Phantom(Rei Custom)(SD)

• This fantastic little super-deformed version of Verde Buster Gundam comes in colored plastic runners with polycaps for joints. 
  
• With parts that snap together easily, it requires no cement or paint to complete, but you will need to paint it if you want it to be accurate. It comes with all the weapon loadouts as seen in the "Gundam Seed Stargazer" Original Net Animation series. 
  
•  A display base is not included, but you can use the one that comes with BB #280 Force Impulse Gundam
  

Beautiful kit of the Verde Buster Gundam, piloted by Shams Couza in Gundam Seed Stargazer. This kit comes molded in colored plastic and all the parts snap together for easy assembly. Polycaps are included for joints. Also included is an unassembled display stand to show off your completed Verde Buster Gundam in any action pose you desire. The GAT-X103AP Verde Buster Gundam is a Mobile Suit in the series Gundam SEED C.E. 73: Stargazer.

This fantastic little super-deformed version of Blu Duel Gundam comes in colored plastic runners with polycaps for joints. With parts that snap together easily, it requires no cement or paint to complete, although you will need to paint it if you want it to be accurate. It comes with all the weapon loadouts as seen in the "Gundam Seed Stargazer" Original Net Animation series. A display base is not included, but you can use the one that comes with BB #280 Force Impulse Gundam.

F2 Zaku Zeon Ver. (HGUC)

• Accessories : the Sord part (tail), a beam rifle, an open hand (right and left), the grip hand for rifles.

- A ????? studio mass-production machine carries out version UP, and appear! 

- Accessories : saber (tail), grip hand (right and left), open hand (right and left), and bit x5, the pedestal for movement (for fixation), display part. According to wikipedia - The xvb-xd Farsia is an X-Rounder use mobile suit of the Vagan that appears in the Mobile Suit Gundam AGE anime series. It's technically piloted by Yurin L'Ciel, though in fact it is controlled remotely by Desil Galette from the cockpit of his xvv-xc Zedas. The xvb-xd Farsia were built specifically to harness an X-Rounder's potential in mind.The Farsia differs to other Vagan mobile weapons of it's time due to its feminine design and lack of a transformation mode. It has been designed with considerations for situations where the pilot has had no formal training. The Farsia is one example of mobile suit that can be controlled using X-Rounder power, ultimately allowing it to be operated without direct control of the pilot. However due to this, it also necessarily for the pilot to function as part of the vessel in order to receive feedback from the power. Because the pilot is now "part of the mobile suit", it ultimately allows certain situations where tragedies can happen to innocents X-Rounder pilots such as its pilot, Yurin L'Ciel, whom have no Mobile Suit piloting experience. However, the Farsia makes up to its design as its also made as a high speed unit, flying around on a auxiliary propulsion system pedestal. Using Yurin as a terminal, it is remotely operated by receiving and amplifying Desil's thought waves [3]. The unit is armed with several farsia bits, which can be controlled via brainwaves to execute devastating all-ranged attacks. Weapons: - Farsia Bit: Farsia keeps five Farsia Bits stored in a backpack. These bit are developed by the Vagan as a multipurpose all ranged remote weaponry. The Bits can fire concentrated beams into the enemy using its individual power generator, while controlling them using an X-Rounder's brainwaves. - Diffuse Beam Cannon: The Farsia is also armed with one Diffuse Beam Cannon on its chest. - Farsia Sword (Tail): Normally serves as the Farsia's "tail". It can detached and used as a sword, while boasting of higher cutting power than a beam saber. - Beam Vulcans/Beam Sabers: Mounted on both hands. Fairly effective at damaging or destroying most human made creations. Also possess the ability to generate a beam saber.

• M1 Astray, Orb Union’s mass production MS, from “Mobile Suit Gundam SEED”
  
  
• Various weapons and optional parts are included.
  
  
• The beam part of the beam sabers are made of transparent plastic.
  
  
• Includes antiship swords, exclusively for Gunpla.
  
  
• Comes with 8 runners, foil sticker, marking sticker, and japanese instruction manual.
  
  
• Accessories: beam rifle, shield, beam saber × 2, × 2 anti-ship sword, For the saber grip (left and right), fist (left), for the rifle grip (right)
  

• Blitz Gundam `The Raven` special warfare specification machines 2nd restart MG SEED. 
  
• 2nd restart mosquito MG celebrated its 10th anniversary from [Gundam SEED], the boarding of Nicole Blitz Gundam. By adopting a newly developed X-Frame, Pause and bold action May provide excellent installation. 
  
• In addition, the Grape and Neil Torikerosu an integrated weapons of offense and defense to reproduce the rich gimmick.  
  
• Torikerosu of the right arm. With beam saber, beam rifle, the Lancer Dart. 
  
• An action-based support as an option. The newly developed X frame, posing a certain force Can be reproduced. 
  
• As the original MG gimmick, to be the image for a `generator` Mirage Colloid stealth Deployment with the shoulder. 
  
• Grape Neil was equipped with the left hand side. In addition to the movable claw part, reproduced in a wire during injection,mounting portion weapon after the injection, MG original. 
  
• Gundam of five aircraft had been developed in Heliopolis ... (set version TV) GAT-X207 Blitz Gundam of a machine. Fuselage frame system was adopted X-200. Has a complete stealth performance,has been specialized for shock tactics. 
  
• Accessories: Shield (Torikerosu), Lancer Dart, beam saber × 2, Piercer lock (Grape Neil)
  

- Two pitchers with a backpack. - Zaku Warrior interchangeable backpack. - Can take a natural pause in the action and play freely movable range. - Caterpillar of the foot is moving in the central axis, forms run on the tracks in the limbs folded Reproducible.

- Another entry into the Gundam Seed lineup is also another 'Big Gundam' model! - This huge 1/60 scale Freedom Gundam features 21 runners of plastic parts, plus polycaps for the joints, so you can pose it after it's built. - All parts are molded in colored plastic so you don't even have to paint it to complete it! Pictorial instructions are very clear and precise.

- Bandai [03] - SD Gundam Guan Yu Gundam. - Completed modal in a box. - Manufactured by Bandai. - Original price is 59.9 now selling at 18.00.

• Nice HG kit of Blu Duel Gundam (basically an upgraded and armored Duel Gundam) piloted by Mudie Holcroft as seen in the "Gundam Seed Stargazer" Original Net Animation series. 
  
• Shoulder weapons rack unit selection formula hatch opening, inside the weapon detail reproduction. 
  
• The legs can be mounted to existing saber saber rack with the new armor design. 
  
• Stand accessories.
  

Item Size/Weight : 31 x 20 x 14 cm / 717g

- A dedicated machine lineup Rezun Schneider Gila Doga HGUC series to. - Attachment: beam rifle for the commander × 1, beam saber × 1, beam Axe × 1,Faust Shutsurumu grenade × 4 × 2, shield × 1, × 1 left palm.

• The final successor of the AGE-3, the AGE-FX pushes the envelope on MS technology! 
  
• Special colors recreated using foil seals.
• Funnels are recreated with clear parts and can be detached!
• Core Fighter features separation gimmick! 
• Rifle can be shifted into form 3!
• Features display base for funnel attack mode! 
• Display base can be adjusted for whatever angle you want!
• Accessories: Long Funnel x6, Short Funnel x8, Beam Rifle, Dedicated Funnel Stand, Display Base

• An updated design of the SD Musha Gundam from many years ago, this old SD designed with new technology now carries a gold electroplated V fin along with posability enhancements found in newer model kits!

• Accessories: Round Takehisa, thunder Tanegashima gun threats, Naginata, head for 璽武 Ashigaru, double-empty triangle.
   
  
• Item Size/Weight : 31 x 20.2 x 5.7 cm / 226g
  

Item Size/Weight : 25.5 x 19.1 x 5.8 cm / 210g

- Adele appears in the color only for the Devere unit! - Adele (ディーヴァ color) -- Mass-production machine of earth Union Army. - Accessories : ドッズ rifle only for Adele, shield, and beam saber x2

- MS heavy period Kio appeared in Part three. - Movable tail impressive. - Accessories: left and right hand grip, left and right palm. According to wikipedia The ovv-af Danazine is a mass produced Heavy Assault Vagan mobile suit appearing in the Kio Arc of Mobile Suit Gundam AGE. The Danazine is the Vagan's next generation mass-production mobile suit, intended to replace the older frontline mobile suits, such as the ovm-e Dorado. It is the primary mobile suit used by the Vagan during the invasion of Earth. During high-speed flight mode, the left and right head stabilizers are closed to cover the Danazine's face, while the legs are retracted. This mode allows the Danazine to reach speeds faster than most other mobile suits. It is armed with a beam cannon built into its waist, two beam vulcans on each hand and a combination beam vulcan/saber mounted under its chin. Weapons - Danazine Cannon : Mounted in the waist. It generates a very wide beam, ideal for eliminating difficult enemies that stand before the Danazine. - Beam Shooter:Mounted under the chin, it's a special beam vulcan gun that can also emit a beam saber. - Beam Vulcan/Beam Saber: Mounted on each hand. Fairly effective at damaging or destroying most human made creations. Also possesses a beam saber mode, like most Vagan mobile suits. - Danazine Spinner: The "tail" of the Danazine, which functions as a striking weapon capable of impaling enemy mobile suits.

HG 1/144 Cherudim is the second Gundam to come from the 00 Second Season line up. Whilst a direct continuation of the first season line, these latest kits boast certain improvements. Head The head is constructed like most HG Gundams, with a two part helmet, a face and a v-fin. Cherudim adds in a set of extra antenna, which connect via a tab and slot to the left side of the head. Further, the sniper Gundam's trademark target scope is sculpted as detail in the centre of the V-fin. Although usually hidden by the trademark red piece, you can remove that and stick it on to the top of the head in order to display the sniper scope. It's a nicely done effort which gets the kit off well from the word go. Torso The torso has rather blocky feel, losing the more circular aesthetic of the previous season. This is partially due to Dynames' optional armour cloak instead being directly built on to Cherudim's cockpit. It's clear evolution of previous ideas and looks somewhat like the Gundam is wearing a bullet proof vest. Ideal for the team's star sniper. Backpack On the back is a fairly generic Gundam backpack, in stark contrast to the previous cones/domes. Though far from just providing thrust, it also holds Cherudim's pair of GN Pistol II's (simple 3 piece constructions with rotating handles) and the Trans-Am use holoscreen. To mount this, two roughly rectangular shapes fold out about 180, so they're surrounding the head. You then plug in a single clear piece. The detail on the holographic scope is nice and sharp but is sadly lacking any colour, so you'll need to paint it to make it show accurate. Arms The arms of the kit use one of the best innovations of the season 2 kits- new wrist articulation. Before, most Gundams basically had a simple balljoint wrist. Not bad but not really much use, especially for posing with larger weapons. Here, the balljoints are still present but connect into a slightly smaller block which extends slightly into the forearm with vertical movement. This allows for much better range and posing, especially with Cherudim's rifle. I've struggled to get Dynames into a sniping pose but the combined arm articulation allows Cherudim to easily pull this iconic pose off. For hands you get two generic weapon holding hands a spare left hand with fingers sculpted in a curved grasp. Ideal for poses craddling the rifle. Legs The legs are perhaps the oddest part of the kit, kind of reminding me of Transformers Animated rather than Gundam. The feet have long fin on the back of each, rationalised as folding down to provide support from recoil when Cherudim is firing. Obviously there's no call for that on a plastic model, but the accuracy is appreciated and they do give the kit a little extra balance. Weapons Sadly, the rifle itself is less strong. Combination and transformation is the big theme of the season 2 Gundam weapons, a direct reference to how CB are no longer an unchallenged force on the battlefield. Cherudim's rifle can be built as a traditional long rifle or fold up to make a shorter gun. The problem is that rather than create a joing to allow the rifle to fold, you have to pull the front section off, turn it upside down and slide a chunky peg into a slot in the back half. It's not the worst design choice ever, but given recent 500/600 yen SD Gundam kits can have the same gimmick on a sword, it'd be nice to see a more expensive HG kit pull off likewise. The Cherudim doesn't have any sabers, but it's folding GN Pistol II's have a blade on the underside of the barrel. These pistols can transform via a simple folding joint from pistols to close combat weapons pretty well. They fit snug into the Cherudim's hands. Shield Bits Extending from Cherudim's butt in a slightly questionable practice is the unit's GN Drive, covered by several GN Shield Bits. The Bits are the main gimmick of the kit, a more defensive variation of the GN Fangs used by Zwei and Arche. These consist of nine identical panels, which are mounted on various places across the body; 2 on the left shoulder, 1 on each knee and 6 covering the GN Drive. A transparent plastic stand is provided, allowing you to display the Bits in hovering defensive action. Some variety is possible but you're pretty much stuck with them as floating shields, not the flying mini-guns Lockon can also use them for. Still, the thought is appreciated. Overall This is a decent kit. I'll admit I probably like the basic design of Dynames more, but Cherudim is far from the worse design out there and alot of the well handled kit engineering helps smooth things over for doubters like me. I don't think this is a must have kit, but it's a strong representation of the Cherudim design. Be sure to lock it on to your shopping basket.

• 9th RG is burdened with the name of the [justice], Justice Gundam! RG elaborate detail to be Usually Mokuseyo 
• Beam boomerang tip of the shoulder ... The shoulder is the first time a kit is removable, reproduce the beam boomerang. 
• The exchange of palm (sold separately) ... RG RG compatible with Freedom Gundam Freedom Gundam, Machine can be reproduced in the play scene 2 holding hands. 
• Connection for the stability of the body ... and ideas for the play Fato~umu -00 stable, equipped with a locking mechanism. In addition, parts are also included support for the display of state (horizontal) -00 Fato~umu during deployment. 
• ... Lifter connecting portion is detachable reproduction, and the lifter body gimmick it can be stored back to the center. In addition, each battery, and the movable nozzle section. 
• Equipped with a slide mechanism to reproduce the features of its own ... RG lifter by actual historical research. The aircraft during deployment Slide the left and right, extended width. By this gimmick, to shoulder a gun without a detachable part of Fato~umu -00 It is possible to move. 
• ZAFT forces based on the GAT series was taken from the Union ZGMF-X09A Justice Gundam ... MS was developed. In the sister machine of Freedom Gundam, machines with N jammer canceller. - Accessories: beam saber, beam boomerang, shield, beam rifle, palm (right), Rifle hand grip (right) ( This is a machine translation. Please allow for possible misinterpretations in the text. ) 
• Item Size : 31 x 19 x 8 cm